tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
3
4/dts-v1/;
5
6#include "msm8998.dtsi"
7#include "pm8005.dtsi"
8#include "pm8998.dtsi"
9#include "pmi8998.dtsi"
10
11/ {
12 model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
13 compatible = "qcom,msm8998-mtp", "qcom,msm8998";
14 chassis-type = "handset";
15
16 qcom,board-id = <8 0>;
17
18 aliases {
19 serial0 = &blsp2_uart1;
20 serial1 = &blsp1_uart3;
21 };
22
23 chosen {
24 stdout-path = "serial0:115200n8";
25 };
26
27 vph_pwr: vph-pwr-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "vph_pwr";
30 regulator-always-on;
31 regulator-boot-on;
32 };
33};
34
35&blsp1_uart3 {
36 status = "okay";
37
38 bluetooth {
39 compatible = "qcom,wcn3990-bt";
40
41 vddio-supply = <&vreg_s4a_1p8>;
42 vddxo-supply = <&vreg_l7a_1p8>;
43 vddrf-supply = <&vreg_l17a_1p3>;
44 vddch0-supply = <&vreg_l25a_3p3>;
45 max-speed = <3200000>;
46 };
47};
48
49&blsp1_uart3_on {
50 rx-pins {
51 /delete-property/ bias-disable;
52 /*
53 * Configure a pull-up on 45 (RX). This is needed to
54 * avoid garbage data when the TX pin of the Bluetooth
55 * module is in tri-state (module powered off or not
56 * driving the signal yet).
57 */
58 bias-pull-up;
59 };
60
61 cts-pins {
62 /delete-property/ bias-disable;
63 /*
64 * Configure a pull-down on 47 (CTS) to match the pull
65 * of the Bluetooth module.
66 */
67 bias-pull-down;
68 };
69};
70
71&blsp2_uart1 {
72 status = "okay";
73};
74
75&etf {
76 status = "okay";
77};
78
79&etm1 {
80 status = "okay";
81};
82
83&etm2 {
84 status = "okay";
85};
86
87&etm3 {
88 status = "okay";
89};
90
91&etm4 {
92 status = "okay";
93};
94
95&etm5 {
96 status = "okay";
97};
98
99&etm6 {
100 status = "okay";
101};
102
103&etm7 {
104 status = "okay";
105};
106
107&etm8 {
108 status = "okay";
109};
110
111&etr {
112 status = "okay";
113};
114
115&funnel1 {
116 status = "okay";
117};
118
119&funnel2 {
120 status = "okay";
121};
122
123&funnel3 {
124 status = "okay";
125};
126
127&funnel4 {
128 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
129};
130
131&funnel5 {
132 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
133};
134
135&pcie0 {
136 status = "okay";
137};
138
139&pcie_phy {
140 status = "okay";
141};
142
143&pm8005_regulators {
144 vdd_s1-supply = <&vph_pwr>;
145
146 pm8005_s1: s1 { /* VDD_GFX supply */
147 regulator-min-microvolt = <524000>;
148 regulator-max-microvolt = <1100000>;
149 regulator-enable-ramp-delay = <500>;
150
151 /* Hack until we rig up the gpu consumer */
152 regulator-always-on;
153 };
154};
155
156&qusb2phy {
157 status = "okay";
158
159 vdd-supply = <&vreg_l1a_0p875>;
160 vdda-pll-supply = <&vreg_l12a_1p8>;
161 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
162};
163
164&replicator1 {
165 status = "okay";
166};
167
168&rpm_requests {
169 regulators-0 {
170 compatible = "qcom,rpm-pm8998-regulators";
171
172 vdd_s1-supply = <&vph_pwr>;
173 vdd_s2-supply = <&vph_pwr>;
174 vdd_s3-supply = <&vph_pwr>;
175 vdd_s4-supply = <&vph_pwr>;
176 vdd_s5-supply = <&vph_pwr>;
177 vdd_s6-supply = <&vph_pwr>;
178 vdd_s7-supply = <&vph_pwr>;
179 vdd_s8-supply = <&vph_pwr>;
180 vdd_s9-supply = <&vph_pwr>;
181 vdd_s10-supply = <&vph_pwr>;
182 vdd_s11-supply = <&vph_pwr>;
183 vdd_s12-supply = <&vph_pwr>;
184 vdd_s13-supply = <&vph_pwr>;
185 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
186 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
187 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
188 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
189 vdd_l6-supply = <&vreg_s5a_2p04>;
190 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
191 vdd_l9-supply = <&vreg_bob>;
192 vdd_l10_l23_l25-supply = <&vreg_bob>;
193 vdd_l13_l19_l21-supply = <&vreg_bob>;
194 vdd_l16_l28-supply = <&vreg_bob>;
195 vdd_l18_l22-supply = <&vreg_bob>;
196 vdd_l20_l24-supply = <&vreg_bob>;
197 vdd_l26-supply = <&vreg_s3a_1p35>;
198 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
199
200 vreg_s3a_1p35: s3 {
201 regulator-min-microvolt = <1352000>;
202 regulator-max-microvolt = <1352000>;
203 };
204
205 vreg_s4a_1p8: s4 {
206 regulator-min-microvolt = <1800000>;
207 regulator-max-microvolt = <1800000>;
208 regulator-allow-set-load;
209 };
210
211 vreg_s5a_2p04: s5 {
212 regulator-min-microvolt = <1904000>;
213 regulator-max-microvolt = <2040000>;
214 };
215
216 vreg_s7a_1p025: s7 {
217 regulator-min-microvolt = <900000>;
218 regulator-max-microvolt = <1028000>;
219 };
220
221 vreg_l1a_0p875: l1 {
222 regulator-min-microvolt = <880000>;
223 regulator-max-microvolt = <880000>;
224 };
225
226 vreg_l2a_1p2: l2 {
227 regulator-min-microvolt = <1200000>;
228 regulator-max-microvolt = <1200000>;
229 };
230
231 vreg_l3a_1p0: l3 {
232 regulator-min-microvolt = <1000000>;
233 regulator-max-microvolt = <1000000>;
234 };
235
236 vreg_l5a_0p8: l5 {
237 regulator-min-microvolt = <800000>;
238 regulator-max-microvolt = <800000>;
239 };
240
241 vreg_l6a_1p8: l6 {
242 regulator-min-microvolt = <1808000>;
243 regulator-max-microvolt = <1808000>;
244 };
245
246 vreg_l7a_1p8: l7 {
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <1800000>;
249 };
250
251 vreg_l8a_1p2: l8 {
252 regulator-min-microvolt = <1200000>;
253 regulator-max-microvolt = <1200000>;
254 };
255
256 vreg_l9a_1p8: l9 {
257 regulator-min-microvolt = <1808000>;
258 regulator-max-microvolt = <2960000>;
259 };
260
261 vreg_l10a_1p8: l10 {
262 regulator-min-microvolt = <1808000>;
263 regulator-max-microvolt = <2960000>;
264 };
265
266 vreg_l11a_1p0: l11 {
267 regulator-min-microvolt = <1000000>;
268 regulator-max-microvolt = <1000000>;
269 };
270
271 vreg_l12a_1p8: l12 {
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <1800000>;
274 };
275
276 vreg_l13a_2p95: l13 {
277 regulator-min-microvolt = <1808000>;
278 regulator-max-microvolt = <2960000>;
279 };
280
281 vreg_l14a_1p88: l14 {
282 regulator-min-microvolt = <1880000>;
283 regulator-max-microvolt = <1880000>;
284 };
285
286 vreg_l15a_1p8: l15 {
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <1800000>;
289 };
290
291 vreg_l16a_2p7: l16 {
292 regulator-min-microvolt = <2704000>;
293 regulator-max-microvolt = <2704000>;
294 };
295
296 vreg_l17a_1p3: l17 {
297 regulator-min-microvolt = <1304000>;
298 regulator-max-microvolt = <1304000>;
299 };
300
301 vreg_l18a_2p7: l18 {
302 regulator-min-microvolt = <2704000>;
303 regulator-max-microvolt = <2704000>;
304 };
305
306 vreg_l19a_3p0: l19 {
307 regulator-min-microvolt = <3008000>;
308 regulator-max-microvolt = <3008000>;
309 };
310
311 vreg_l20a_2p95: l20 {
312 regulator-min-microvolt = <2960000>;
313 regulator-max-microvolt = <2960000>;
314 regulator-allow-set-load;
315 };
316
317 vreg_l21a_2p95: l21 {
318 regulator-min-microvolt = <2960000>;
319 regulator-max-microvolt = <2960000>;
320 regulator-system-load = <800000>;
321 regulator-allow-set-load;
322 };
323
324 vreg_l22a_2p85: l22 {
325 regulator-min-microvolt = <2864000>;
326 regulator-max-microvolt = <2864000>;
327 };
328
329 vreg_l23a_3p3: l23 {
330 regulator-min-microvolt = <3312000>;
331 regulator-max-microvolt = <3312000>;
332 };
333
334 vreg_l24a_3p075: l24 {
335 regulator-min-microvolt = <3088000>;
336 regulator-max-microvolt = <3088000>;
337 };
338
339 vreg_l25a_3p3: l25 {
340 regulator-min-microvolt = <3104000>;
341 regulator-max-microvolt = <3312000>;
342 };
343
344 vreg_l26a_1p2: l26 {
345 regulator-min-microvolt = <1200000>;
346 regulator-max-microvolt = <1200000>;
347 regulator-allow-set-load;
348 };
349
350 vreg_l28_3p0: l28 {
351 regulator-min-microvolt = <3008000>;
352 regulator-max-microvolt = <3008000>;
353 };
354
355 vreg_lvs1a_1p8: lvs1 {
356 regulator-min-microvolt = <1800000>;
357 regulator-max-microvolt = <1800000>;
358 };
359
360 vreg_lvs2a_1p8: lvs2 {
361 regulator-min-microvolt = <1800000>;
362 regulator-max-microvolt = <1800000>;
363 };
364
365 };
366
367 regulators-1 {
368 compatible = "qcom,rpm-pmi8998-regulators";
369
370 vdd_bob-supply = <&vph_pwr>;
371
372 vreg_bob: bob {
373 regulator-min-microvolt = <3312000>;
374 regulator-max-microvolt = <3600000>;
375 };
376 };
377};
378
379&remoteproc_adsp {
380 status = "okay";
381};
382
383&remoteproc_mss {
384 status = "okay";
385};
386
387&remoteproc_slpi {
388 status = "okay";
389};
390
391&tlmm {
392 gpio-reserved-ranges = <0 4>, <81 4>;
393};
394
395&sdhc2 {
396 status = "okay";
397 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
398
399 vmmc-supply = <&vreg_l21a_2p95>;
400 vqmmc-supply = <&vreg_l13a_2p95>;
401
402 pinctrl-names = "default", "sleep";
403 pinctrl-0 = <&sdc2_on &sdc2_cd>;
404 pinctrl-1 = <&sdc2_off &sdc2_cd>;
405};
406
407&stm {
408 status = "okay";
409};
410
411&ufshc {
412 status = "okay";
413 vcc-supply = <&vreg_l20a_2p95>;
414 vccq-supply = <&vreg_l26a_1p2>;
415 vccq2-supply = <&vreg_s4a_1p8>;
416 vdd-hba-supply = <&vreg_l26a_1p2>;
417 vcc-max-microamp = <750000>;
418 vccq-max-microamp = <560000>;
419 vccq2-max-microamp = <750000>;
420};
421
422&ufsphy {
423 status = "okay";
424 vdda-phy-supply = <&vreg_l1a_0p875>;
425 vdda-pll-supply = <&vreg_l2a_1p2>;
426};
427
428&usb3 {
429 status = "okay";
430};
431
432&usb3_dwc3 {
433 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
434};
435
436&usb3phy {
437 status = "okay";
438
439 vdda-phy-supply = <&vreg_l1a_0p875>;
440 vdda-pll-supply = <&vreg_l2a_1p2>;
441};
442
443&wifi {
444 status = "okay";
445
446 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
447 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
448 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
449 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
450};