tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * TC358775 DSI to LVDS bridge driver
4 *
5 * Copyright (C) 2020 SMART Wireless Computing
6 * Author: Vinay Simha BN <simhavcs@gmail.com>
7 *
8 */
9/* #define DEBUG */
10#include <linux/bitfield.h>
11#include <linux/clk.h>
12#include <linux/device.h>
13#include <linux/gpio/consumer.h>
14#include <linux/i2c.h>
15#include <linux/kernel.h>
16#include <linux/media-bus-format.h>
17#include <linux/module.h>
18#include <linux/of_device.h>
19#include <linux/regulator/consumer.h>
20#include <linux/slab.h>
21
22#include <linux/unaligned.h>
23
24#include <drm/display/drm_dp_helper.h>
25#include <drm/drm_atomic_helper.h>
26#include <drm/drm_bridge.h>
27#include <drm/drm_mipi_dsi.h>
28#include <drm/drm_of.h>
29#include <drm/drm_probe_helper.h>
30
31#define FLD_VAL(val, start, end) FIELD_PREP(GENMASK(start, end), val)
32
33/* Registers */
34
35/* DSI D-PHY Layer Registers */
36#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */
37#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */
38#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */
39#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */
40#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */
41#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */
42#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */
43#define CLW_CNTRL 0x0040 /* Clock Lane Control */
44#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */
45#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */
46#define D2W_CNTRL 0x004C /* Data Lane 2 Control */
47#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */
48#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */
49
50/* DSI PPI Layer Registers */
51#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */
52#define PPI_START_FUNCTION 1
53
54#define PPI_BUSYPPI 0x0108
55#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */
56#define PPI_LPTXTIMECNT 0x0114
57#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */
58#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */
59
60/* Analog timer function enable */
61#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */
62#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */
63#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */
64#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */
65#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */
66
67#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */
68#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */
69#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */
70#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */
71
72#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */
73#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */
74#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */
75#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */
76#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */
77#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */
78#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */
79#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */
80#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */
81#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */
82#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */
83#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */
84#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */
85#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */
86#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */
87
88#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */
89#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */
90#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */
91#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */
92#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */
93#define DSI_RX_START 1
94
95#define DSI_BUSYDSI 0x0208
96#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */
97#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */
98#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */
99
100#define DSI_INTSTATUS 0x0220 /* Interrupt Status */
101#define DSI_INTMASK 0x0224 /* Interrupt Mask */
102#define DSI_INTCLR 0x0228 /* Interrupt Clear */
103#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */
104
105#define DSIERRCNT 0x0300 /* DSI Error Count */
106#define APLCTRL 0x0400 /* Application Layer Control */
107#define RDPKTLN 0x0404 /* Command Read Packet Length */
108
109#define VPCTRL 0x0450 /* Video Path Control */
110#define EVTMODE BIT(5) /* Video event mode enable, tc35876x only */
111#define HTIM1 0x0454 /* Horizontal Timing Control 1 */
112#define HTIM2 0x0458 /* Horizontal Timing Control 2 */
113#define VTIM1 0x045C /* Vertical Timing Control 1 */
114#define VTIM2 0x0460 /* Vertical Timing Control 2 */
115#define VFUEN 0x0464 /* Video Frame Timing Update Enable */
116#define VFUEN_EN BIT(0) /* Upload Enable */
117
118/* Mux Input Select for LVDS LINK Input */
119#define LV_MX0003 0x0480 /* Bit 0 to 3 */
120#define LV_MX0407 0x0484 /* Bit 4 to 7 */
121#define LV_MX0811 0x0488 /* Bit 8 to 11 */
122#define LV_MX1215 0x048C /* Bit 12 to 15 */
123#define LV_MX1619 0x0490 /* Bit 16 to 19 */
124#define LV_MX2023 0x0494 /* Bit 20 to 23 */
125#define LV_MX2427 0x0498 /* Bit 24 to 27 */
126#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \
127 FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24))
128
129/* Input bit numbers used in mux registers */
130enum {
131 LVI_R0,
132 LVI_R1,
133 LVI_R2,
134 LVI_R3,
135 LVI_R4,
136 LVI_R5,
137 LVI_R6,
138 LVI_R7,
139 LVI_G0,
140 LVI_G1,
141 LVI_G2,
142 LVI_G3,
143 LVI_G4,
144 LVI_G5,
145 LVI_G6,
146 LVI_G7,
147 LVI_B0,
148 LVI_B1,
149 LVI_B2,
150 LVI_B3,
151 LVI_B4,
152 LVI_B5,
153 LVI_B6,
154 LVI_B7,
155 LVI_HS,
156 LVI_VS,
157 LVI_DE,
158 LVI_L0
159};
160
161#define LVCFG 0x049C /* LVDS Configuration */
162#define LVPHY0 0x04A0 /* LVDS PHY 0 */
163#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */
164#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14)
165#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */
166#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */
167
168#define LVPHY1 0x04A4 /* LVDS PHY 1 */
169#define SYSSTAT 0x0500 /* System Status */
170#define SYSRST 0x0504 /* System Reset */
171
172#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */
173#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */
174#define SYS_RST_LCD BIT(2) /* Reset LCD controller */
175#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */
176#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */
177#define SYS_RST_REG BIT(5) /* Reset Register module */
178
179/* GPIO Registers */
180#define GPIOC 0x0520 /* GPIO Control */
181#define GPIOO 0x0524 /* GPIO Output */
182#define GPIOI 0x0528 /* GPIO Input */
183
184/* I2C Registers */
185#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */
186#define I2CMADDR 0x0544 /* I2C Master Addressing */
187#define WDATAQ 0x0548 /* Write Data Queue */
188#define RDATAQ 0x054C /* Read Data Queue */
189
190/* Chip ID and Revision ID Register */
191#define IDREG 0x0580
192
193#define LPX_PERIOD 4
194#define TTA_GET 0x40000
195#define TTA_SURE 6
196#define SINGLE_LINK 1
197#define DUAL_LINK 2
198
199#define TC358775XBG_ID 0x00007500
200
201/* Debug Registers */
202#define DEBUG00 0x05A0 /* Debug */
203#define DEBUG01 0x05A4 /* LVDS Data */
204
205#define DSI_CLEN_BIT BIT(0)
206#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */
207#define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */
208#define LVCFG_LVEN_BIT BIT(0)
209
210#define L0EN BIT(1)
211
212#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000
213#define TC358775_VPCTRL_VSDELAY__SHIFT 20
214static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val)
215{
216 return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) &
217 TC358775_VPCTRL_VSDELAY__MASK;
218}
219
220#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100
221#define TC358775_VPCTRL_OPXLFMT__SHIFT 8
222static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val)
223{
224 return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) &
225 TC358775_VPCTRL_OPXLFMT__MASK;
226}
227
228#define TC358775_VPCTRL_MSF__MASK 0x00000001
229#define TC358775_VPCTRL_MSF__SHIFT 0
230static inline u32 TC358775_VPCTRL_MSF(uint32_t val)
231{
232 return ((val) << TC358775_VPCTRL_MSF__SHIFT) &
233 TC358775_VPCTRL_MSF__MASK;
234}
235
236#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0
237#define TC358775_LVCFG_PCLKDIV__SHIFT 4
238static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val)
239{
240 return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) &
241 TC358775_LVCFG_PCLKDIV__MASK;
242}
243
244#define TC358775_LVCFG_LVDLINK__MASK 0x00000002
245#define TC358775_LVCFG_LVDLINK__SHIFT 1
246static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val)
247{
248 return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) &
249 TC358775_LVCFG_LVDLINK__MASK;
250}
251
252enum tc358775_ports {
253 TC358775_DSI_IN,
254 TC358775_LVDS_OUT0,
255 TC358775_LVDS_OUT1,
256};
257
258enum tc3587x5_type {
259 TC358765 = 0x65,
260 TC358775 = 0x75,
261};
262
263struct tc_data {
264 struct i2c_client *i2c;
265 struct device *dev;
266
267 struct drm_bridge bridge;
268 struct drm_bridge *panel_bridge;
269
270 struct device_node *host_node;
271 struct mipi_dsi_device *dsi;
272 u8 num_dsi_lanes;
273
274 struct regulator *vdd;
275 struct regulator *vddio;
276 struct gpio_desc *reset_gpio;
277 struct gpio_desc *stby_gpio;
278 u8 lvds_link; /* single-link or dual-link */
279 u8 bpc;
280
281 enum tc3587x5_type type;
282};
283
284static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
285{
286 return container_of(b, struct tc_data, bridge);
287}
288
289static void tc_bridge_atomic_pre_enable(struct drm_bridge *bridge,
290 struct drm_atomic_state *state)
291{
292 struct tc_data *tc = bridge_to_tc(bridge);
293 struct device *dev = &tc->dsi->dev;
294 int ret;
295
296 ret = regulator_enable(tc->vddio);
297 if (ret < 0)
298 dev_err(dev, "regulator vddio enable failed, %d\n", ret);
299 usleep_range(10000, 11000);
300
301 ret = regulator_enable(tc->vdd);
302 if (ret < 0)
303 dev_err(dev, "regulator vdd enable failed, %d\n", ret);
304 usleep_range(10000, 11000);
305
306 gpiod_set_value(tc->stby_gpio, 0);
307 usleep_range(10000, 11000);
308
309 gpiod_set_value(tc->reset_gpio, 0);
310 usleep_range(10, 20);
311}
312
313static void tc_bridge_atomic_post_disable(struct drm_bridge *bridge,
314 struct drm_atomic_state *state)
315{
316 struct tc_data *tc = bridge_to_tc(bridge);
317 struct device *dev = &tc->dsi->dev;
318 int ret;
319
320 gpiod_set_value(tc->reset_gpio, 1);
321 usleep_range(10, 20);
322
323 gpiod_set_value(tc->stby_gpio, 1);
324 usleep_range(10000, 11000);
325
326 ret = regulator_disable(tc->vdd);
327 if (ret < 0)
328 dev_err(dev, "regulator vdd disable failed, %d\n", ret);
329 usleep_range(10000, 11000);
330
331 ret = regulator_disable(tc->vddio);
332 if (ret < 0)
333 dev_err(dev, "regulator vddio disable failed, %d\n", ret);
334 usleep_range(10000, 11000);
335}
336
337static void d2l_read(struct i2c_client *i2c, u16 addr, u32 *val)
338{
339 int ret;
340 u8 buf_addr[2];
341
342 put_unaligned_be16(addr, buf_addr);
343 ret = i2c_master_send(i2c, buf_addr, sizeof(buf_addr));
344 if (ret < 0)
345 goto fail;
346
347 ret = i2c_master_recv(i2c, (u8 *)val, sizeof(*val));
348 if (ret < 0)
349 goto fail;
350
351 pr_debug("d2l: I2C : addr:%04x value:%08x\n", addr, *val);
352 return;
353
354fail:
355 dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n",
356 ret, addr);
357}
358
359static void d2l_write(struct i2c_client *i2c, u16 addr, u32 val)
360{
361 u8 data[6];
362 int ret;
363
364 put_unaligned_be16(addr, data);
365 put_unaligned_le32(val, data + 2);
366
367 ret = i2c_master_send(i2c, data, ARRAY_SIZE(data));
368 if (ret < 0)
369 dev_err(&i2c->dev, "Error %d writing to subaddress 0x%x\n",
370 ret, addr);
371}
372
373static void tc_bridge_atomic_enable(struct drm_bridge *bridge,
374 struct drm_atomic_state *state)
375{
376 struct tc_data *tc = bridge_to_tc(bridge);
377 u32 hback_porch, hsync_len, hfront_porch, hactive, htime1, htime2;
378 u32 vback_porch, vsync_len, vfront_porch, vactive, vtime1, vtime2;
379 u32 val = 0;
380 u16 dsiclk, clkdiv, byteclk, t1, t2, t3, vsdelay;
381 struct drm_connector *connector =
382 drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
383 struct drm_connector_state *conn_state =
384 drm_atomic_get_new_connector_state(state, connector);
385 struct drm_crtc_state *crtc_state =
386 drm_atomic_get_new_crtc_state(state, conn_state->crtc);
387 struct drm_display_mode *mode = &crtc_state->adjusted_mode;
388
389 hback_porch = mode->htotal - mode->hsync_end;
390 hsync_len = mode->hsync_end - mode->hsync_start;
391 vback_porch = mode->vtotal - mode->vsync_end;
392 vsync_len = mode->vsync_end - mode->vsync_start;
393
394 htime1 = (hback_porch << 16) + hsync_len;
395 vtime1 = (vback_porch << 16) + vsync_len;
396
397 hfront_porch = mode->hsync_start - mode->hdisplay;
398 hactive = mode->hdisplay;
399 vfront_porch = mode->vsync_start - mode->vdisplay;
400 vactive = mode->vdisplay;
401
402 htime2 = (hfront_porch << 16) + hactive;
403 vtime2 = (vfront_porch << 16) + vactive;
404
405 d2l_read(tc->i2c, IDREG, &val);
406
407 dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n",
408 (val >> 8) & 0xFF, val & 0xFF);
409
410 d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | SYS_RST_BM |
411 SYS_RST_LCD | SYS_RST_I2CM);
412 usleep_range(30000, 40000);
413
414 d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
415 d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD);
416 d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3);
417 d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3);
418 d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3);
419 d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3);
420
421 val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT;
422 d2l_write(tc->i2c, PPI_LANEENABLE, val);
423 d2l_write(tc->i2c, DSI_LANEENABLE, val);
424
425 d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION);
426 d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START);
427
428 /* Video event mode vs pulse mode bit, does not exist for tc358775 */
429 if (tc->type == TC358765)
430 val = EVTMODE;
431 else
432 val = 0;
433
434 if (tc->bpc == 8)
435 val |= TC358775_VPCTRL_OPXLFMT(1);
436 else /* bpc = 6; */
437 val |= TC358775_VPCTRL_MSF(1);
438
439 dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / 1000;
440 clkdiv = dsiclk / (tc->lvds_link == DUAL_LINK ? DIVIDE_BY_6 : DIVIDE_BY_3);
441 byteclk = dsiclk / 4;
442 t1 = hactive * (tc->bpc * 3 / 8) / tc->num_dsi_lanes;
443 t2 = ((100000 / clkdiv)) * (hactive + hback_porch + hsync_len + hfront_porch) / 1000;
444 t3 = ((t2 * byteclk) / 100) - (hactive * (tc->bpc * 3 / 8) /
445 tc->num_dsi_lanes);
446
447 vsdelay = (clkdiv * (t1 + t3) / byteclk) - hback_porch - hsync_len - hactive;
448
449 val |= TC358775_VPCTRL_VSDELAY(vsdelay);
450 d2l_write(tc->i2c, VPCTRL, val);
451
452 d2l_write(tc->i2c, HTIM1, htime1);
453 d2l_write(tc->i2c, VTIM1, vtime1);
454 d2l_write(tc->i2c, HTIM2, htime2);
455 d2l_write(tc->i2c, VTIM2, vtime2);
456
457 d2l_write(tc->i2c, VFUEN, VFUEN_EN);
458 d2l_write(tc->i2c, SYSRST, SYS_RST_LCD);
459 d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6));
460
461 dev_dbg(tc->dev, "bus_formats %04x bpc %d\n",
462 connector->display_info.bus_formats[0],
463 tc->bpc);
464 if (connector->display_info.bus_formats[0] ==
465 MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) {
466 /* VESA-24 */
467 d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
468 d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0));
469 d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7));
470 d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
471 d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
472 d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
473 d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
474 } else {
475 /* JEIDA-18 and JEIDA-24 */
476 d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R2, LVI_R3, LVI_R4, LVI_R5));
477 d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R6, LVI_R1, LVI_R7, LVI_G2));
478 d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G3, LVI_G4, LVI_G0, LVI_G1));
479 d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G5, LVI_G6, LVI_G7, LVI_B2));
480 d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B0, LVI_B1, LVI_B3, LVI_B4));
481 d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B5, LVI_B6, LVI_B7, LVI_L0));
482 d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R0));
483 }
484
485 d2l_write(tc->i2c, VFUEN, VFUEN_EN);
486
487 val = LVCFG_LVEN_BIT;
488 if (tc->lvds_link == DUAL_LINK) {
489 val |= TC358775_LVCFG_LVDLINK(1);
490 val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6);
491 } else {
492 val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3);
493 }
494 d2l_write(tc->i2c, LVCFG, val);
495}
496
497static enum drm_mode_status
498tc_mode_valid(struct drm_bridge *bridge,
499 const struct drm_display_info *info,
500 const struct drm_display_mode *mode)
501{
502 struct tc_data *tc = bridge_to_tc(bridge);
503
504 /*
505 * Maximum pixel clock speed 135MHz for single-link
506 * 270MHz for dual-link
507 */
508 if ((mode->clock > 135000 && tc->lvds_link == SINGLE_LINK) ||
509 (mode->clock > 270000 && tc->lvds_link == DUAL_LINK))
510 return MODE_CLOCK_HIGH;
511
512 switch (info->bus_formats[0]) {
513 case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
514 case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
515 /* RGB888 */
516 tc->bpc = 8;
517 break;
518 case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
519 /* RGB666 */
520 tc->bpc = 6;
521 break;
522 default:
523 dev_warn(tc->dev,
524 "unsupported LVDS bus format 0x%04x\n",
525 info->bus_formats[0]);
526 return MODE_NOMODE;
527 }
528
529 return MODE_OK;
530}
531
532static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc)
533{
534 struct device_node *endpoint;
535 struct device_node *remote;
536 int dsi_lanes = -1;
537
538 endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node,
539 TC358775_DSI_IN, -1);
540 dsi_lanes = drm_of_get_data_lanes_count(endpoint, 1, 4);
541
542 /* Quirk old dtb: Use data lanes from the DSI host side instead of bridge */
543 if (dsi_lanes == -EINVAL || dsi_lanes == -ENODEV) {
544 remote = of_graph_get_remote_endpoint(endpoint);
545 dsi_lanes = drm_of_get_data_lanes_count(remote, 1, 4);
546 of_node_put(remote);
547 if (dsi_lanes >= 1)
548 dev_warn(tc->dev, "no dsi-lanes for the bridge, using host lanes\n");
549 }
550
551 of_node_put(endpoint);
552
553 if (dsi_lanes < 0)
554 return dsi_lanes;
555
556 tc->num_dsi_lanes = dsi_lanes;
557
558 tc->host_node = of_graph_get_remote_node(np, 0, 0);
559 if (!tc->host_node)
560 return -ENODEV;
561
562 of_node_put(tc->host_node);
563
564 tc->lvds_link = SINGLE_LINK;
565 endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node,
566 TC358775_LVDS_OUT1, -1);
567 if (endpoint) {
568 remote = of_graph_get_remote_port_parent(endpoint);
569 of_node_put(endpoint);
570
571 if (remote) {
572 if (of_device_is_available(remote))
573 tc->lvds_link = DUAL_LINK;
574 of_node_put(remote);
575 }
576 }
577
578 dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes);
579 dev_dbg(tc->dev, "operating in %d-link mode\n", tc->lvds_link);
580
581 return 0;
582}
583
584static int tc_bridge_attach(struct drm_bridge *bridge,
585 struct drm_encoder *encoder,
586 enum drm_bridge_attach_flags flags)
587{
588 struct tc_data *tc = bridge_to_tc(bridge);
589
590 /* Attach the panel-bridge to the dsi bridge */
591 return drm_bridge_attach(encoder, tc->panel_bridge,
592 &tc->bridge, flags);
593}
594
595static const struct drm_bridge_funcs tc_bridge_funcs = {
596 .attach = tc_bridge_attach,
597 .atomic_pre_enable = tc_bridge_atomic_pre_enable,
598 .atomic_enable = tc_bridge_atomic_enable,
599 .mode_valid = tc_mode_valid,
600 .atomic_post_disable = tc_bridge_atomic_post_disable,
601 .atomic_reset = drm_atomic_helper_bridge_reset,
602 .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
603 .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
604};
605
606static int tc_attach_host(struct tc_data *tc)
607{
608 struct device *dev = &tc->i2c->dev;
609 struct mipi_dsi_host *host;
610 struct mipi_dsi_device *dsi;
611 int ret;
612 const struct mipi_dsi_device_info info = { .type = "tc358775",
613 .channel = 0,
614 .node = NULL,
615 };
616
617 host = of_find_mipi_dsi_host_by_node(tc->host_node);
618 if (!host)
619 return dev_err_probe(dev, -EPROBE_DEFER, "failed to find dsi host\n");
620
621 dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
622 if (IS_ERR(dsi)) {
623 dev_err(dev, "failed to create dsi device\n");
624 return PTR_ERR(dsi);
625 }
626
627 tc->dsi = dsi;
628
629 dsi->lanes = tc->num_dsi_lanes;
630 dsi->format = MIPI_DSI_FMT_RGB888;
631 dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
632 MIPI_DSI_MODE_LPM;
633
634 /*
635 * The hs_rate and lp_rate are data rate values. The HS mode is
636 * differential, while the LP mode is single ended. As the HS mode
637 * uses DDR, the DSI clock frequency is half the hs_rate. The 10 Mbs
638 * data rate for LP mode is not specified in the bridge data sheet,
639 * but seems to be part of the MIPI DSI spec.
640 */
641 if (tc->type == TC358765)
642 dsi->hs_rate = 800000000;
643 else
644 dsi->hs_rate = 1000000000;
645 dsi->lp_rate = 10000000;
646
647 ret = devm_mipi_dsi_attach(dev, dsi);
648 if (ret < 0) {
649 dev_err(dev, "failed to attach dsi to host\n");
650 return ret;
651 }
652
653 return 0;
654}
655
656static int tc_probe(struct i2c_client *client)
657{
658 struct device *dev = &client->dev;
659 struct tc_data *tc;
660 int ret;
661
662 tc = devm_drm_bridge_alloc(dev, struct tc_data, bridge,
663 &tc_bridge_funcs);
664 if (IS_ERR(tc))
665 return PTR_ERR(tc);
666
667 tc->dev = dev;
668 tc->i2c = client;
669 tc->type = (enum tc3587x5_type)(unsigned long)of_device_get_match_data(dev);
670
671 tc->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node,
672 TC358775_LVDS_OUT0, 0);
673 if (IS_ERR(tc->panel_bridge))
674 return PTR_ERR(tc->panel_bridge);
675
676 ret = tc358775_parse_dt(dev->of_node, tc);
677 if (ret)
678 return ret;
679
680 tc->vddio = devm_regulator_get(dev, "vddio-supply");
681 if (IS_ERR(tc->vddio)) {
682 ret = PTR_ERR(tc->vddio);
683 dev_err(dev, "vddio-supply not found\n");
684 return ret;
685 }
686
687 tc->vdd = devm_regulator_get(dev, "vdd-supply");
688 if (IS_ERR(tc->vdd)) {
689 ret = PTR_ERR(tc->vdd);
690 dev_err(dev, "vdd-supply not found\n");
691 return ret;
692 }
693
694 tc->stby_gpio = devm_gpiod_get_optional(dev, "stby", GPIOD_OUT_HIGH);
695 if (IS_ERR(tc->stby_gpio))
696 return PTR_ERR(tc->stby_gpio);
697
698 tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
699 if (IS_ERR(tc->reset_gpio)) {
700 ret = PTR_ERR(tc->reset_gpio);
701 dev_err(dev, "cannot get reset-gpios %d\n", ret);
702 return ret;
703 }
704
705 tc->bridge.of_node = dev->of_node;
706 tc->bridge.pre_enable_prev_first = true;
707 drm_bridge_add(&tc->bridge);
708
709 i2c_set_clientdata(client, tc);
710
711 ret = tc_attach_host(tc);
712 if (ret)
713 goto err_bridge_remove;
714
715 return 0;
716
717err_bridge_remove:
718 drm_bridge_remove(&tc->bridge);
719 return ret;
720}
721
722static void tc_remove(struct i2c_client *client)
723{
724 struct tc_data *tc = i2c_get_clientdata(client);
725
726 drm_bridge_remove(&tc->bridge);
727}
728
729static const struct i2c_device_id tc358775_i2c_ids[] = {
730 { "tc358765", TC358765, },
731 { "tc358775", TC358775, },
732 { }
733};
734MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids);
735
736static const struct of_device_id tc358775_of_ids[] = {
737 { .compatible = "toshiba,tc358765", .data = (void *)TC358765, },
738 { .compatible = "toshiba,tc358775", .data = (void *)TC358775, },
739 { }
740};
741MODULE_DEVICE_TABLE(of, tc358775_of_ids);
742
743static struct i2c_driver tc358775_driver = {
744 .driver = {
745 .name = "tc358775",
746 .of_match_table = tc358775_of_ids,
747 },
748 .id_table = tc358775_i2c_ids,
749 .probe = tc_probe,
750 .remove = tc_remove,
751};
752module_i2c_driver(tc358775_driver);
753
754MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>");
755MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver");
756MODULE_LICENSE("GPL v2");