tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
13 depends on OF && SPI
14 select REGMAP_SPI
15 help
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
22 depends on OF
23 depends on MFD_SYSCON
24 select VIDEOMODE_HELPERS
25 help
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
35 help
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41 tristate "AUO A030JTN01"
42 depends on SPI
43 select REGMAP_SPI
44 help
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49 tristate "Boe BF060Y8M-AJ0 panel"
50 depends on OF
51 depends on DRM_MIPI_DSI
52 depends on BACKLIGHT_CLASS_DEVICE
53 help
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60 tristate "Boe Himax8279d panel"
61 depends on OF
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
64 help
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TD4320
71 tristate "BOE TD4320 DSI panel"
72 depends on OF
73 depends on DRM_MIPI_DSI
74 depends on BACKLIGHT_CLASS_DEVICE
75 help
76 Say Y here if you want to enable support for BOE TD4320 1080x2340
77 video mode panel found in Xiaomi Redmi Note 7 smartphones.
78
79config DRM_PANEL_BOE_TH101MB31UIG002_28A
80 tristate "Boe TH101MB31UIG002-28A panel"
81 depends on OF
82 depends on DRM_MIPI_DSI
83 depends on BACKLIGHT_CLASS_DEVICE
84 help
85 Say Y here if you want to enable support for Boe
86 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
87 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
88 interface to the host and has a built-in LED backlight.
89
90config DRM_PANEL_BOE_TV101WUM_NL6
91 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
92 depends on OF
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
95 help
96 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
97 45NA WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_BOE_TV101WUM_LL2
100 tristate "BOE TV101WUM LL2 1200x1920 panel"
101 depends on OF
102 depends on DRM_MIPI_DSI
103 depends on BACKLIGHT_CLASS_DEVICE
104 help
105 Say Y here if you want to support for BOE TV101WUM-LL2
106 WUXGA PANEL DSI Video Mode panel
107
108config DRM_PANEL_EBBG_FT8719
109 tristate "EBBG FT8719 panel driver"
110 depends on OF
111 depends on DRM_MIPI_DSI
112 depends on BACKLIGHT_CLASS_DEVICE
113 help
114 Say Y here if you want to enable support for the EBBG FT8719
115 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
116 The panel has a resolution of 1080x2246. It provides a MIPI DSI
117 interface to the host.
118
119config DRM_PANEL_ELIDA_KD35T133
120 tristate "Elida KD35T133 panel driver"
121 depends on OF
122 depends on DRM_MIPI_DSI
123 depends on BACKLIGHT_CLASS_DEVICE
124 help
125 Say Y here if you want to enable support for the Elida
126 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
127 system interfaces.
128
129config DRM_PANEL_FEIXIN_K101_IM2BA02
130 tristate "Feixin K101 IM2BA02 panel"
131 depends on OF
132 depends on DRM_MIPI_DSI
133 depends on BACKLIGHT_CLASS_DEVICE
134 help
135 Say Y here if you want to enable support for the Feixin K101 IM2BA02
136 4-lane 800x1280 MIPI DSI panel.
137
138config DRM_PANEL_FEIYANG_FY07024DI26A30D
139 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
140 depends on OF
141 depends on DRM_MIPI_DSI
142 depends on BACKLIGHT_CLASS_DEVICE
143 help
144 Say Y if you want to enable support for panels based on the
145 Feiyang FY07024DI26A30-D MIPI-DSI interface.
146
147config DRM_PANEL_DSI_CM
148 tristate "Generic DSI command mode panels"
149 depends on OF
150 depends on DRM_MIPI_DSI
151 depends on BACKLIGHT_CLASS_DEVICE
152 help
153 DRM panel driver for DSI command mode panels with support for
154 embedded and external backlights.
155
156config DRM_PANEL_LVDS
157 tristate "Generic LVDS panel driver"
158 depends on OF
159 depends on BACKLIGHT_CLASS_DEVICE
160 select VIDEOMODE_HELPERS
161 help
162 This driver supports LVDS panels that don't require device-specific
163 handling of power supplies or control signals. It implements automatic
164 backlight handling if the panel is attached to a backlight controller.
165
166config DRM_PANEL_HIMAX_HX8279
167 tristate "Himax HX8279-based panels"
168 depends on OF
169 depends on DRM_MIPI_DSI
170 depends on BACKLIGHT_CLASS_DEVICE
171 help
172 Say Y if you want to enable support for panels based on the
173 Himax HX8279 controller, such as the Startek KD070FHFID078
174 7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
175 and others.
176
177config DRM_PANEL_HIMAX_HX83102
178 tristate "Himax HX83102-based panels"
179 depends on OF
180 depends on DRM_MIPI_DSI
181 depends on BACKLIGHT_CLASS_DEVICE
182 help
183 Say Y if you want to enable support for panels based on the
184 Himax HX83102 controller.
185
186config DRM_PANEL_HIMAX_HX83112A
187 tristate "Himax HX83112A-based DSI panel"
188 depends on OF
189 depends on DRM_MIPI_DSI
190 depends on BACKLIGHT_CLASS_DEVICE
191 select DRM_KMS_HELPER
192 help
193 Say Y here if you want to enable support for Himax HX83112A-based
194 display panels, such as the one found in the Fairphone 4 smartphone.
195
196config DRM_PANEL_HIMAX_HX83112B
197 tristate "Himax HX83112B-based DSI panel"
198 depends on OF
199 depends on DRM_MIPI_DSI
200 depends on BACKLIGHT_CLASS_DEVICE
201 select DRM_KMS_HELPER
202 help
203 Say Y here if you want to enable support for Himax HX83112B-based
204 display panels, such as the one found in the Fairphone 3 smartphone.
205
206config DRM_PANEL_HIMAX_HX8394
207 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
208 depends on OF
209 depends on DRM_MIPI_DSI
210 depends on BACKLIGHT_CLASS_DEVICE
211 help
212 Say Y if you want to enable support for panels based on the
213 Himax HX8394 controller, such as the HannStar HSD060BHW4
214 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
215
216 If M is selected the module will be called panel-himax-hx8394.
217
218config DRM_PANEL_ILITEK_IL9322
219 tristate "Ilitek ILI9322 320x240 QVGA panels"
220 depends on OF && SPI
221 select REGMAP
222 help
223 Say Y here if you want to enable support for Ilitek IL9322
224 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
225
226config DRM_PANEL_ILITEK_ILI9341
227 tristate "Ilitek ILI9341 240x320 QVGA panels"
228 depends on SPI
229 select DRM_KMS_HELPER
230 select DRM_GEM_DMA_HELPER
231 depends on BACKLIGHT_CLASS_DEVICE
232 select DRM_MIPI_DBI
233 help
234 Say Y here if you want to enable support for Ilitek IL9341
235 QVGA (240x320) RGB panels. support serial & parallel rgb
236 interface.
237
238config DRM_PANEL_ILITEK_ILI9805
239 tristate "Ilitek ILI9805-based panels"
240 depends on OF
241 depends on DRM_MIPI_DSI
242 depends on BACKLIGHT_CLASS_DEVICE
243 help
244 Say Y if you want to enable support for panels based on the
245 Ilitek ILI9805 controller.
246
247config DRM_PANEL_ILITEK_ILI9806E
248 tristate "Ilitek ILI9806E-based panels"
249 depends on OF
250 depends on DRM_MIPI_DSI
251 depends on BACKLIGHT_CLASS_DEVICE
252 help
253 Say Y if you want to enable support for panels based on the
254 Ilitek ILI9806E controller.
255
256config DRM_PANEL_ILITEK_ILI9881C
257 tristate "Ilitek ILI9881C-based panels"
258 depends on OF
259 depends on DRM_MIPI_DSI
260 depends on BACKLIGHT_CLASS_DEVICE
261 help
262 Say Y if you want to enable support for panels based on the
263 Ilitek ILI9881c controller.
264
265config DRM_PANEL_ILITEK_ILI9882T
266 tristate "Ilitek ILI9882t-based panels"
267 depends on OF
268 depends on DRM_MIPI_DSI
269 depends on BACKLIGHT_CLASS_DEVICE
270 help
271 Say Y if you want to enable support for panels based on the
272 Ilitek ILI9882t controller.
273
274config DRM_PANEL_INNOLUX_EJ030NA
275 tristate "Innolux EJ030NA 320x480 LCD panel"
276 depends on OF && SPI
277 select REGMAP_SPI
278 help
279 Say Y here to enable support for the Innolux/Chimei EJ030NA
280 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
281 and LDK handheld gaming consoles.
282
283config DRM_PANEL_INNOLUX_P079ZCA
284 tristate "Innolux P079ZCA panel"
285 depends on OF
286 depends on DRM_MIPI_DSI
287 depends on BACKLIGHT_CLASS_DEVICE
288 help
289 Say Y here if you want to enable support for Innolux P079ZCA
290 TFT-LCD modules. The panel has a 1024x768 resolution and uses
291 24 bit RGB per pixel. It provides a MIPI DSI interface to
292 the host and has a built-in LED backlight.
293
294config DRM_PANEL_JADARD_JD9365DA_H3
295 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
296 depends on OF
297 depends on DRM_MIPI_DSI
298 depends on BACKLIGHT_CLASS_DEVICE
299 help
300 Say Y here if you want to enable support for Jadard JD9365DA-H3
301 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
302 800RGBx1280 dots at maximum.
303
304config DRM_PANEL_JDI_LPM102A188A
305 tristate "JDI LPM102A188A DSI panel"
306 depends on OF && GPIOLIB
307 depends on DRM_MIPI_DSI
308 depends on BACKLIGHT_CLASS_DEVICE
309 help
310 Say Y here if you want to enable support for JDI LPM102A188A DSI
311 command mode panel as found in Google Pixel C devices.
312 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
313 to the host.
314
315config DRM_PANEL_JDI_LT070ME05000
316 tristate "JDI LT070ME05000 WUXGA DSI panel"
317 depends on OF
318 depends on DRM_MIPI_DSI
319 depends on BACKLIGHT_CLASS_DEVICE
320 help
321 Say Y here if you want to enable support for JDI DSI video mode
322 panel as found in Google Nexus 7 (2013) devices.
323 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
324 24 bit per pixel.
325
326config DRM_PANEL_JDI_R63452
327 tristate "JDI R63452 Full HD DSI panel"
328 depends on OF
329 depends on DRM_MIPI_DSI
330 depends on BACKLIGHT_CLASS_DEVICE
331 help
332 Say Y here if you want to enable support for the JDI R63452
333 DSI command mode panel as found in Xiaomi Mi 5 Devices.
334
335config DRM_PANEL_KHADAS_TS050
336 tristate "Khadas TS050 panel"
337 depends on OF
338 depends on DRM_MIPI_DSI
339 depends on BACKLIGHT_CLASS_DEVICE
340 help
341 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
342 panel module. The panel has a 1080x1920 resolution and uses
343 24 bit RGB per pixel. It provides a MIPI DSI interface to
344 the host, a built-in LED backlight and touch controller.
345
346config DRM_PANEL_KINGDISPLAY_KD097D04
347 tristate "Kingdisplay kd097d04 panel"
348 depends on OF
349 depends on DRM_MIPI_DSI
350 depends on BACKLIGHT_CLASS_DEVICE
351 help
352 Say Y here if you want to enable support for Kingdisplay kd097d04
353 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
354 24 bit RGB per pixel. It provides a MIPI DSI interface to
355 the host and has a built-in LED backlight.
356
357config DRM_PANEL_LEADTEK_LTK050H3146W
358 tristate "Leadtek LTK050H3146W panel"
359 depends on OF
360 depends on DRM_MIPI_DSI
361 depends on BACKLIGHT_CLASS_DEVICE
362 help
363 Say Y here if you want to enable support for Leadtek LTK050H3146W
364 TFT-LCD modules. The panel has a 720x1280 resolution and uses
365 24 bit RGB per pixel. It provides a MIPI DSI interface to
366 the host and has a built-in LED backlight.
367
368config DRM_PANEL_LEADTEK_LTK500HD1829
369 tristate "Leadtek LTK500HD1829 panel"
370 depends on OF
371 depends on DRM_MIPI_DSI
372 depends on BACKLIGHT_CLASS_DEVICE
373 help
374 Say Y here if you want to enable support for Kingdisplay kd097d04
375 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
376 24 bit RGB per pixel. It provides a MIPI DSI interface to
377 the host and has a built-in LED backlight.
378
379config DRM_PANEL_LINCOLNTECH_LCD197
380 tristate "Lincoln Technologies lcd197 panel"
381 depends on OF
382 depends on DRM_MIPI_DSI
383 depends on BACKLIGHT_CLASS_DEVICE
384 help
385 Say Y here if you want to enable support for lincolntech lcd197
386 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
387 24 bit RGB per pixel. It provides a MIPI DSI interface to
388 the host.
389
390config DRM_PANEL_LG_LB035Q02
391 tristate "LG LB035Q024573 RGB panel"
392 depends on GPIOLIB && OF && SPI
393 help
394 Say Y here if you want to enable support for the LB035Q02 RGB panel
395 (found on the Gumstix Overo Palo35 board). To compile this driver as
396 a module, choose M here.
397
398config DRM_PANEL_LG_LG4573
399 tristate "LG4573 RGB/SPI panel"
400 depends on OF && SPI
401 select VIDEOMODE_HELPERS
402 help
403 Say Y here if you want to enable support for LG4573 RGB panel.
404 To compile this driver as a module, choose M here.
405
406config DRM_PANEL_LG_SW43408
407 tristate "LG SW43408 panel"
408 depends on OF
409 depends on DRM_MIPI_DSI
410 depends on BACKLIGHT_CLASS_DEVICE
411 select DRM_DISPLAY_DSC_HELPER
412 select DRM_DISPLAY_HELPER
413 help
414 Say Y here if you want to enable support for LG sw43408 panel.
415 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
416 pixel. It provides a MIPI DSI interface to the host and has a
417 built-in LED backlight.
418
419config DRM_PANEL_MAGNACHIP_D53E6EA8966
420 tristate "Magnachip D53E6EA8966 DSI panel"
421 depends on OF && SPI
422 depends on DRM_MIPI_DSI
423 depends on BACKLIGHT_CLASS_DEVICE
424 select DRM_MIPI_DBI
425 help
426 DRM panel driver for the Samsung AMS495QA01 panel controlled
427 with the Magnachip D53E6EA8966 panel IC. This panel receives
428 video data via DSI but commands via 9-bit SPI using DBI.
429
430config DRM_PANEL_MANTIX_MLAF057WE51
431 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
432 depends on OF
433 depends on DRM_MIPI_DSI
434 depends on BACKLIGHT_CLASS_DEVICE
435 help
436 Say Y here if you want to enable support for the Mantix
437 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
438 has a resolution of 720x1440 pixels, a built in backlight and touch
439 controller.
440
441config DRM_PANEL_NEC_NL8048HL11
442 tristate "NEC NL8048HL11 RGB panel"
443 depends on GPIOLIB && OF && SPI
444 help
445 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
446 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
447 as a module, choose M here.
448
449config DRM_PANEL_NEWVISION_NV3051D
450 tristate "NewVision NV3051D DSI panel"
451 depends on OF
452 depends on DRM_MIPI_DSI
453 depends on BACKLIGHT_CLASS_DEVICE
454 help
455 This driver supports the NV3051D based panel found on the Anbernic
456 RG353P and RG353V.
457
458config DRM_PANEL_NEWVISION_NV3052C
459 tristate "NewVision NV3052C RGB/SPI panel"
460 depends on OF && SPI
461 depends on BACKLIGHT_CLASS_DEVICE
462 select DRM_MIPI_DBI
463 help
464 Say Y here if you want to enable support for the panels built
465 around the NewVision NV3052C display controller.
466
467config DRM_PANEL_NOVATEK_NT35510
468 tristate "Novatek NT35510 RGB panel driver"
469 depends on OF
470 depends on DRM_MIPI_DSI
471 depends on BACKLIGHT_CLASS_DEVICE
472 help
473 Say Y here if you want to enable support for the panels built
474 around the Novatek NT35510 display controller, such as some
475 Hydis panels.
476
477config DRM_PANEL_NOVATEK_NT35560
478 tristate "Novatek NT35560 DSI command mode panel"
479 depends on OF
480 depends on DRM_MIPI_DSI
481 depends on BACKLIGHT_CLASS_DEVICE
482 select VIDEOMODE_HELPERS
483 help
484 Say Y here if you want to enable the Novatek NT35560 display
485 controller. This panel supports DSI in both command and video
486 mode. This supports several panels such as Sony ACX424AKM and
487 ACX424AKP.
488
489config DRM_PANEL_NOVATEK_NT35950
490 tristate "Novatek NT35950 DSI panel"
491 depends on OF
492 depends on DRM_MIPI_DSI
493 depends on BACKLIGHT_CLASS_DEVICE
494 help
495 Say Y here if you want to enable support for the panels built
496 around the Novatek NT35950 display controller, such as some
497 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
498 mobile phones.
499
500config DRM_PANEL_NOVATEK_NT36523
501 tristate "Novatek NT36523 panel driver"
502 depends on OF
503 depends on DRM_MIPI_DSI
504 depends on BACKLIGHT_CLASS_DEVICE
505 help
506 Say Y here if you want to enable support for the panels built
507 around the Novatek NT36523 display controller, such as some
508 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
509
510config DRM_PANEL_NOVATEK_NT36672A
511 tristate "Novatek NT36672A DSI panel"
512 depends on OF
513 depends on DRM_MIPI_DSI
514 depends on BACKLIGHT_CLASS_DEVICE
515 help
516 Say Y here if you want to enable support for the panels built
517 around the Novatek NT36672A display controller, such as some
518 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
519
520config DRM_PANEL_NOVATEK_NT36672E
521 tristate "Novatek NT36672E DSI panel"
522 depends on OF
523 depends on DRM_MIPI_DSI
524 depends on BACKLIGHT_CLASS_DEVICE
525 help
526 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
527 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
528 RGB per pixel.
529
530config DRM_PANEL_NOVATEK_NT37801
531 tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
532 depends on OF
533 depends on DRM_MIPI_DSI
534 depends on BACKLIGHT_CLASS_DEVICE
535 select DRM_DISPLAY_DSC_HELPER
536 select DRM_DISPLAY_HELPER
537 help
538 Say Y here if you want to enable support for Novatek NT37801 (or
539 NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
540 resolution.
541
542config DRM_PANEL_NOVATEK_NT39016
543 tristate "Novatek NT39016 RGB/SPI panel"
544 depends on OF && SPI
545 depends on BACKLIGHT_CLASS_DEVICE
546 select REGMAP_SPI
547 help
548 Say Y here if you want to enable support for the panels built
549 around the Novatek NT39016 display controller.
550
551config DRM_PANEL_OLIMEX_LCD_OLINUXINO
552 tristate "Olimex LCD-OLinuXino panel"
553 depends on OF
554 depends on I2C
555 depends on BACKLIGHT_CLASS_DEVICE
556 select CRC32
557 help
558 The panel is used with different sizes LCDs, from 480x272 to
559 1280x800, and 24 bit per pixel.
560
561 Say Y here if you want to enable support for Olimex Ltd.
562 LCD-OLinuXino panel.
563
564config DRM_PANEL_ORISETECH_OTA5601A
565 tristate "Orise Technology ota5601a RGB/SPI panel"
566 depends on SPI
567 depends on BACKLIGHT_CLASS_DEVICE
568 select REGMAP_SPI
569 help
570 Say Y here if you want to enable support for the panels built
571 around the Orise Technology OTA9601A display controller.
572
573config DRM_PANEL_ORISETECH_OTM8009A
574 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
575 depends on OF
576 depends on DRM_MIPI_DSI
577 depends on BACKLIGHT_CLASS_DEVICE
578 help
579 Say Y here if you want to enable support for Orise Technology
580 otm8009a 480x800 dsi 2dl panel.
581
582config DRM_PANEL_OSD_OSD101T2587_53TS
583 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
584 depends on OF
585 depends on DRM_MIPI_DSI
586 depends on BACKLIGHT_CLASS_DEVICE
587 help
588 Say Y here if you want to enable support for One Stop Displays
589 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
590
591config DRM_PANEL_PANASONIC_VVX10F034N00
592 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
593 depends on OF
594 depends on DRM_MIPI_DSI
595 depends on BACKLIGHT_CLASS_DEVICE
596 help
597 Say Y here if you want to enable support for Panasonic VVX10F034N00
598 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
599 Xperia Z2 tablets
600
601config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
602 tristate "Raspberry Pi 7-inch touchscreen panel"
603 depends on DRM_MIPI_DSI
604 help
605 Say Y here if you want to enable support for the Raspberry
606 Pi 7" Touchscreen. To compile this driver as a module,
607 choose M here.
608
609config DRM_PANEL_RAYDIUM_RM67191
610 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
611 depends on OF
612 depends on DRM_MIPI_DSI
613 depends on BACKLIGHT_CLASS_DEVICE
614 help
615 Say Y here if you want to enable support for Raydium RM67191 FHD
616 (1080x1920) DSI panel.
617
618config DRM_PANEL_RAYDIUM_RM67200
619 tristate "Raydium RM67200-based DSI panel"
620 depends on OF
621 depends on DRM_MIPI_DSI
622 help
623 Say Y here if you want to enable support for Raydium RM67200-based
624 DSI video mode panels. This panel controller can be found in the
625 Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
626 evaluation boards.
627
628config DRM_PANEL_RAYDIUM_RM68200
629 tristate "Raydium RM68200 720x1280 DSI video mode panel"
630 depends on OF
631 depends on DRM_MIPI_DSI
632 depends on BACKLIGHT_CLASS_DEVICE
633 help
634 Say Y here if you want to enable support for Raydium RM68200
635 720x1280 DSI video mode panel.
636
637config DRM_PANEL_RAYDIUM_RM692E5
638 tristate "Raydium RM692E5-based DSI panel"
639 depends on OF
640 depends on DRM_MIPI_DSI
641 depends on BACKLIGHT_CLASS_DEVICE
642 select DRM_DISPLAY_DSC_HELPER
643 select DRM_DISPLAY_HELPER
644 help
645 Say Y here if you want to enable support for Raydium RM692E5-based
646 display panels, such as the one found in the Fairphone 5 smartphone.
647
648config DRM_PANEL_RAYDIUM_RM69380
649 tristate "Raydium RM69380-based DSI panel"
650 depends on OF && GPIOLIB
651 depends on DRM_MIPI_DSI
652 depends on BACKLIGHT_CLASS_DEVICE
653 help
654 Say Y here if you want to enable support for Raydium RM69380-based
655 display panels.
656
657 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
658 in combination with an EDO OLED panel.
659
660config DRM_PANEL_RENESAS_R61307
661 tristate "Renesas R61307 DSI video mode panel"
662 depends on OF
663 depends on DRM_MIPI_DSI
664 depends on BACKLIGHT_CLASS_DEVICE
665 help
666 Say Y here if you want to enable support for KOE tx13d100vm0eaa
667 IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
668 resolution and uses 24 bit RGB per pixel.
669
670 This panel controller can be found in LG Optimus Vu P895 smartphone
671 in combination with LCD panel.
672
673config DRM_PANEL_RENESAS_R69328
674 tristate "Renesas R69328 720x1280 DSI video mode panel"
675 depends on OF
676 depends on DRM_MIPI_DSI
677 depends on BACKLIGHT_CLASS_DEVICE
678 help
679 Say Y here if you want to enable support for JDI dx12d100vm0eaa
680 IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
681 resolution and uses 24 bit RGB per pixel.
682
683 This panel controller can be found in LG Optimus 4X P895 smartphone
684 in combination with LCD panel.
685
686config DRM_PANEL_RONBO_RB070D30
687 tristate "Ronbo Electronics RB070D30 panel"
688 depends on OF
689 depends on DRM_MIPI_DSI
690 depends on BACKLIGHT_CLASS_DEVICE
691 help
692 Say Y here if you want to enable support for Ronbo Electronics
693 RB070D30 1024x600 DSI panel.
694
695config DRM_PANEL_SAMSUNG_AMS581VF01
696 tristate "Samsung AMS581VF01 panel"
697 depends on OF
698 depends on DRM_MIPI_DSI
699 depends on BACKLIGHT_CLASS_DEVICE
700 help
701 Say Y or M here if you want to enable support for the
702 Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
703
704config DRM_PANEL_SAMSUNG_AMS639RQ08
705 tristate "Samsung AMS639RQ08 panel"
706 depends on OF
707 depends on DRM_MIPI_DSI
708 depends on BACKLIGHT_CLASS_DEVICE
709 help
710 Say Y or M here if you want to enable support for the
711 Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
712
713config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
714 tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
715 depends on GPIOLIB && OF && REGULATOR
716 depends on DRM_MIPI_DSI
717 depends on BACKLIGHT_CLASS_DEVICE
718 help
719 Say Y here if you want to enable support for Samsung AMS427AP24 panel
720 with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
721 GT-I9195I). To compile this driver as a module, choose M here.
722
723config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
724 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
725 depends on OF
726 select DRM_MIPI_DSI
727 select VIDEOMODE_HELPERS
728
729config DRM_PANEL_SAMSUNG_ATNA33XC20
730 tristate "Samsung ATNA33XC20 eDP panel"
731 depends on OF
732 depends on BACKLIGHT_CLASS_DEVICE
733 depends on PM
734 select DRM_DISPLAY_DP_HELPER
735 select DRM_DISPLAY_HELPER
736 select DRM_DISPLAY_DP_AUX_BUS
737 help
738 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
739 be handled by the DRM_PANEL_SIMPLE driver because its power
740 sequencing is non-standard.
741
742config DRM_PANEL_SAMSUNG_DB7430
743 tristate "Samsung DB7430-based DPI panels"
744 depends on OF && SPI && GPIOLIB
745 depends on BACKLIGHT_CLASS_DEVICE
746 select DRM_MIPI_DBI
747 help
748 Say Y here if you want to enable support for the Samsung
749 DB7430 DPI display controller used in such devices as the
750 LMS397KF04 480x800 DPI panel.
751
752config DRM_PANEL_SAMSUNG_LD9040
753 tristate "Samsung LD9040 RGB/SPI panel"
754 depends on OF && SPI
755 depends on BACKLIGHT_CLASS_DEVICE
756 select VIDEOMODE_HELPERS
757
758config DRM_PANEL_SAMSUNG_S6E3FA7
759 tristate "Samsung S6E3FA7 panel driver"
760 depends on OF
761 depends on DRM_MIPI_DSI
762 depends on BACKLIGHT_CLASS_DEVICE
763 help
764 Say Y here if you want to enable support for the Samsung S6E3FA7
765 1920x2220 panel.
766
767config DRM_PANEL_SAMSUNG_S6D16D0
768 tristate "Samsung S6D16D0 DSI video mode panel"
769 depends on OF
770 depends on DRM_MIPI_DSI
771 select VIDEOMODE_HELPERS
772
773config DRM_PANEL_SAMSUNG_S6D27A1
774 tristate "Samsung S6D27A1 DPI panel driver"
775 depends on OF && SPI && GPIOLIB
776 select DRM_MIPI_DBI
777 help
778 Say Y here if you want to enable support for the Samsung
779 S6D27A1 DPI 480x800 panel.
780
781 This panel can be found in Samsung Galaxy Ace 2
782 GT-I8160 mobile phone.
783
784config DRM_PANEL_SAMSUNG_S6D7AA0
785 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
786 depends on OF
787 depends on BACKLIGHT_CLASS_DEVICE
788 select DRM_MIPI_DSI
789 select VIDEOMODE_HELPERS
790
791config DRM_PANEL_SAMSUNG_S6E3HA2
792 tristate "Samsung S6E3HA2 DSI video mode panel"
793 depends on OF
794 depends on DRM_MIPI_DSI
795 depends on BACKLIGHT_CLASS_DEVICE
796 select VIDEOMODE_HELPERS
797
798config DRM_PANEL_SAMSUNG_S6E3HA8
799 tristate "Samsung S6E3HA8 DSI video mode panel"
800 depends on OF
801 depends on DRM_MIPI_DSI
802 depends on BACKLIGHT_CLASS_DEVICE
803 select DRM_DISPLAY_DSC_HELPER
804 select VIDEOMODE_HELPERS
805
806config DRM_PANEL_SAMSUNG_S6E63J0X03
807 tristate "Samsung S6E63J0X03 DSI command mode panel"
808 depends on OF
809 depends on DRM_MIPI_DSI
810 depends on BACKLIGHT_CLASS_DEVICE
811 select VIDEOMODE_HELPERS
812
813config DRM_PANEL_SAMSUNG_S6E63M0
814 tristate "Samsung S6E63M0 RGB panel"
815 depends on OF
816 depends on BACKLIGHT_CLASS_DEVICE
817 help
818 Say Y here if you want to enable support for Samsung S6E63M0
819 AMOLED LCD panel. This panel can be accessed using SPI or
820 DSI.
821
822config DRM_PANEL_SAMSUNG_S6E63M0_SPI
823 tristate "Samsung S6E63M0 RGB SPI interface"
824 depends on SPI
825 depends on DRM_PANEL_SAMSUNG_S6E63M0
826 default DRM_PANEL_SAMSUNG_S6E63M0
827 select DRM_MIPI_DBI
828 help
829 Say Y here if you want to be able to access the Samsung
830 S6E63M0 panel using SPI.
831
832config DRM_PANEL_SAMSUNG_S6E63M0_DSI
833 tristate "Samsung S6E63M0 RGB DSI interface"
834 depends on DRM_MIPI_DSI
835 depends on DRM_PANEL_SAMSUNG_S6E63M0
836 help
837 Say Y here if you want to be able to access the Samsung
838 S6E63M0 panel using DSI.
839
840config DRM_PANEL_SAMSUNG_S6E8AA0
841 tristate "Samsung S6E8AA0 DSI video mode panel"
842 depends on OF
843 select DRM_MIPI_DSI
844 select VIDEOMODE_HELPERS
845
846config DRM_PANEL_SAMSUNG_SOFEF00
847 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
848 depends on OF
849 depends on DRM_MIPI_DSI
850 depends on BACKLIGHT_CLASS_DEVICE
851 select VIDEOMODE_HELPERS
852 help
853 Say Y or M here if you want to enable support for the Samsung AMOLED
854 command mode panels found in the OnePlus 6/6T smartphones.
855
856 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
857
858config DRM_PANEL_SEIKO_43WVF1G
859 tristate "Seiko 43WVF1G panel"
860 depends on OF
861 depends on BACKLIGHT_CLASS_DEVICE
862 select VIDEOMODE_HELPERS
863 help
864 Say Y here if you want to enable support for the Seiko
865 43WVF1G controller for 800x480 LCD panels
866
867config DRM_PANEL_SHARP_LQ101R1SX01
868 tristate "Sharp LQ101R1SX01 panel"
869 depends on OF
870 depends on DRM_MIPI_DSI
871 depends on BACKLIGHT_CLASS_DEVICE
872 help
873 Say Y here if you want to enable support for Sharp LQ101R1SX01
874 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
875 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
876 the host and has a built-in LED backlight.
877
878 To compile this driver as a module, choose M here: the module
879 will be called panel-sharp-lq101r1sx01.
880
881config DRM_PANEL_SHARP_LS037V7DW01
882 tristate "Sharp LS037V7DW01 VGA LCD panel"
883 depends on GPIOLIB && OF && REGULATOR
884 help
885 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
886 (480x640) LCD panel (found on the TI SDP3430 board).
887
888config DRM_PANEL_SHARP_LS043T1LE01
889 tristate "Sharp LS043T1LE01 qHD video mode panel"
890 depends on OF
891 depends on DRM_MIPI_DSI
892 depends on BACKLIGHT_CLASS_DEVICE
893 help
894 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
895 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
896
897config DRM_PANEL_SHARP_LS060T1SX01
898 tristate "Sharp LS060T1SX01 FullHD video mode panel"
899 depends on OF
900 depends on DRM_MIPI_DSI
901 depends on BACKLIGHT_CLASS_DEVICE
902 help
903 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
904 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
905 Bundle.
906
907config DRM_PANEL_SITRONIX_ST7701
908 tristate "Sitronix ST7701 panel driver"
909 depends on OF
910 depends on SPI || DRM_MIPI_DSI
911 select DRM_MIPI_DBI if SPI
912 depends on BACKLIGHT_CLASS_DEVICE
913 help
914 Say Y here if you want to enable support for the Sitronix
915 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
916 system interfaces.
917
918config DRM_PANEL_SITRONIX_ST7703
919 tristate "Sitronix ST7703 based MIPI touchscreen panels"
920 depends on OF
921 depends on DRM_MIPI_DSI
922 depends on BACKLIGHT_CLASS_DEVICE
923 help
924 Say Y here if you want to enable support for Sitronix ST7703 based
925 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
926 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
927 in backlight and touch controller.
928 Touch input support is provided by the goodix driver and needs to be
929 selected separately.
930
931config DRM_PANEL_SITRONIX_ST7789V
932 tristate "Sitronix ST7789V panel"
933 depends on OF && SPI
934 depends on BACKLIGHT_CLASS_DEVICE
935 help
936 Say Y here if you want to enable support for the Sitronix
937 ST7789V controller for 240x320 LCD panels
938
939config DRM_PANEL_SONY_ACX565AKM
940 tristate "Sony ACX565AKM panel"
941 depends on GPIOLIB && OF && SPI
942 depends on BACKLIGHT_CLASS_DEVICE
943 help
944 Say Y here if you want to enable support for the Sony ACX565AKM
945 800x600 3.5" panel (found on the Nokia N900).
946
947config DRM_PANEL_SONY_TD4353_JDI
948 tristate "Sony TD4353 JDI panel"
949 depends on GPIOLIB && OF
950 depends on DRM_MIPI_DSI
951 depends on BACKLIGHT_CLASS_DEVICE
952 help
953 Say Y here if you want to enable support for the Sony Tama
954 TD4353 JDI command mode panel as found on some Sony Xperia
955 XZ2 and XZ2 Compact smartphones.
956
957config DRM_PANEL_SONY_TULIP_TRULY_NT35521
958 tristate "Sony Tulip Truly NT35521 panel"
959 depends on GPIOLIB && OF
960 depends on DRM_MIPI_DSI
961 depends on BACKLIGHT_CLASS_DEVICE
962 help
963 Say Y here if you want to enable support for the Sony Tulip
964 NT35521 1280x720 video mode panel as found on Sony Xperia M4
965 Aqua phone.
966
967config DRM_PANEL_STARTEK_KD070FHFID015
968 tristate "STARTEK KD070FHFID015 panel"
969 depends on OF
970 depends on DRM_MIPI_DSI
971 depends on BACKLIGHT_CLASS_DEVICE
972 help
973 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
974 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
975 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
976 the host, a built-in LED backlight and touch controller.
977
978config DRM_PANEL_EDP
979 tristate "support for simple Embedded DisplayPort panels"
980 depends on OF
981 depends on BACKLIGHT_CLASS_DEVICE
982 depends on PM
983 select VIDEOMODE_HELPERS
984 select DRM_DISPLAY_DP_HELPER
985 select DRM_DISPLAY_HELPER
986 select DRM_DISPLAY_DP_AUX_BUS
987 select DRM_KMS_HELPER
988 help
989 DRM panel driver for dumb eDP panels that need at most a regulator and
990 a GPIO to be powered up. Optionally a backlight can be attached so
991 that it can be automatically turned off when the panel goes into a
992 low power state.
993
994config DRM_PANEL_SIMPLE
995 tristate "support for simple panels (other than eDP ones)"
996 depends on OF
997 depends on BACKLIGHT_CLASS_DEVICE
998 depends on PM
999 select VIDEOMODE_HELPERS
1000 help
1001 DRM panel driver for dumb non-eDP panels that need at most a regulator
1002 and a GPIO to be powered up. Optionally a backlight can be attached so
1003 that it can be automatically turned off when the panel goes into a
1004 low power state.
1005
1006config DRM_PANEL_SUMMIT
1007 tristate "Apple Summit display panel"
1008 depends on OF
1009 depends on DRM_MIPI_DSI
1010 depends on BACKLIGHT_CLASS_DEVICE
1011 help
1012 Say Y if you want to enable support for the "Summit" display panel
1013 used as a touchbar on certain Apple laptops.
1014
1015config DRM_PANEL_SYNAPTICS_R63353
1016 tristate "Synaptics R63353-based panels"
1017 depends on OF
1018 depends on DRM_MIPI_DSI
1019 depends on BACKLIGHT_CLASS_DEVICE
1020 help
1021 Say Y if you want to enable support for panels based on the
1022 Synaptics R63353 controller.
1023
1024config DRM_PANEL_TDO_TL070WSH30
1025 tristate "TDO TL070WSH30 DSI panel"
1026 depends on OF
1027 depends on DRM_MIPI_DSI
1028 depends on BACKLIGHT_CLASS_DEVICE
1029 help
1030 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1031 panel module. The panel has a 1024×600 resolution and uses
1032 24 bit RGB per pixel. It provides a MIPI DSI interface to
1033 the host, a built-in LED backlight and touch controller.
1034
1035config DRM_PANEL_TPO_TD028TTEC1
1036 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1037 depends on OF && SPI
1038 depends on BACKLIGHT_CLASS_DEVICE
1039 help
1040 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1041 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1042
1043config DRM_PANEL_TPO_TD043MTEA1
1044 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1045 depends on GPIOLIB && OF && REGULATOR && SPI
1046 help
1047 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1048 4.3" panel (found on the OMAP3 Pandora board).
1049
1050config DRM_PANEL_TPO_TPG110
1051 tristate "TPO TPG 800x400 panel"
1052 depends on OF && SPI && GPIOLIB
1053 depends on BACKLIGHT_CLASS_DEVICE
1054 help
1055 Say Y here if you want to enable support for TPO TPG110
1056 400CH LTPS TFT LCD Single Chip Digital Driver for up to
1057 800x400 LCD panels.
1058
1059config DRM_PANEL_TRULY_NT35597_WQXGA
1060 tristate "Truly WQXGA"
1061 depends on OF
1062 depends on DRM_MIPI_DSI
1063 help
1064 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1065 Video Mode panel
1066
1067config DRM_PANEL_VISIONOX_G2647FB105
1068 tristate "Visionox G2647FB105"
1069 depends on OF
1070 depends on DRM_MIPI_DSI
1071 depends on BACKLIGHT_CLASS_DEVICE
1072 help
1073 Say Y here if you want to enable support for the Visionox
1074 G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1075
1076config DRM_PANEL_VISIONOX_R66451
1077 tristate "Visionox R66451"
1078 depends on OF
1079 depends on DRM_MIPI_DSI
1080 depends on BACKLIGHT_CLASS_DEVICE
1081 select DRM_DISPLAY_DSC_HELPER
1082 select DRM_DISPLAY_HELPER
1083 help
1084 Say Y here if you want to enable support for Visionox
1085 R66451 1080x2340 AMOLED DSI panel.
1086
1087config DRM_PANEL_VISIONOX_RM69299
1088 tristate "Visionox RM69299"
1089 depends on OF
1090 depends on DRM_MIPI_DSI
1091 help
1092 Say Y here if you want to enable support for Visionox
1093 RM69299 DSI Video Mode panel.
1094
1095config DRM_PANEL_VISIONOX_RM692E5
1096 tristate "Visionox RM692E5"
1097 depends on OF
1098 depends on DRM_MIPI_DSI
1099 depends on BACKLIGHT_CLASS_DEVICE
1100 select DRM_DISPLAY_DSC_HELPER
1101 select DRM_DISPLAY_HELPER
1102 help
1103 Say Y here if you want to enable support for Visionox RM692E5 amoled
1104 display panels, such as the one found in the Nothing Phone (1)
1105 smartphone.
1106
1107config DRM_PANEL_VISIONOX_VTDR6130
1108 tristate "Visionox VTDR6130"
1109 depends on OF
1110 depends on DRM_MIPI_DSI
1111 depends on BACKLIGHT_CLASS_DEVICE
1112 help
1113 Say Y here if you want to enable support for Visionox
1114 VTDR6130 1080x2400 AMOLED DSI panel.
1115
1116config DRM_PANEL_WIDECHIPS_WS2401
1117 tristate "Widechips WS2401 DPI panel driver"
1118 depends on SPI && GPIOLIB
1119 depends on BACKLIGHT_CLASS_DEVICE
1120 select DRM_MIPI_DBI
1121 help
1122 Say Y here if you want to enable support for the Widechips WS2401 DPI
1123 480x800 display controller used in panels such as Samsung LMS380KF01.
1124 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1125
1126config DRM_PANEL_XINPENG_XPP055C272
1127 tristate "Xinpeng XPP055C272 panel driver"
1128 depends on OF
1129 depends on DRM_MIPI_DSI
1130 depends on BACKLIGHT_CLASS_DEVICE
1131 help
1132 Say Y here if you want to enable support for the Xinpeng
1133 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1134 system interfaces.
1135endmenu