tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/* SPDX-License-Identifier: BSD-2-Clause */
2/*
3 * Copyright (c) 2016-2021, Linaro Limited
4 */
5
6#ifndef __OPTEE_RPC_CMD_H
7#define __OPTEE_RPC_CMD_H
8
9/*
10 * All RPC is done with a struct optee_msg_arg as bearer of information,
11 * struct optee_msg_arg::arg holds values defined by OPTEE_RPC_CMD_* below.
12 * Only the commands handled by the kernel driver are defined here.
13 *
14 * RPC communication with tee-supplicant is reversed compared to normal
15 * client communication described above. The supplicant receives requests
16 * and sends responses.
17 */
18
19/*
20 * Get time
21 *
22 * Returns number of seconds and nano seconds since the Epoch,
23 * 1970-01-01 00:00:00 +0000 (UTC).
24 *
25 * [out] value[0].a Number of seconds
26 * [out] value[0].b Number of nano seconds.
27 */
28#define OPTEE_RPC_CMD_GET_TIME 3
29
30/*
31 * Notification from/to secure world.
32 *
33 * If secure world needs to wait for something, for instance a mutex, it
34 * does a notification wait request instead of spinning in secure world.
35 * Conversely can a synchronous notification can be sent when a secure
36 * world mutex with a thread waiting thread is unlocked.
37 *
38 * This interface can also be used to wait for a asynchronous notification
39 * which instead is sent via a non-secure interrupt.
40 *
41 * Waiting on notification
42 * [in] value[0].a OPTEE_RPC_NOTIFICATION_WAIT
43 * [in] value[0].b notification value
44 * [in] value[0].c timeout in milliseconds or 0 if no timeout
45 *
46 * Sending a synchronous notification
47 * [in] value[0].a OPTEE_RPC_NOTIFICATION_SEND
48 * [in] value[0].b notification value
49 */
50#define OPTEE_RPC_CMD_NOTIFICATION 4
51#define OPTEE_RPC_NOTIFICATION_WAIT 0
52#define OPTEE_RPC_NOTIFICATION_SEND 1
53
54/*
55 * Suspend execution
56 *
57 * [in] value[0].a Number of milliseconds to suspend
58 */
59#define OPTEE_RPC_CMD_SUSPEND 5
60
61/*
62 * Allocate a piece of shared memory
63 *
64 * [in] value[0].a Type of memory one of
65 * OPTEE_RPC_SHM_TYPE_* below
66 * [in] value[0].b Requested size
67 * [in] value[0].c Required alignment
68 * [out] memref[0] Buffer
69 */
70#define OPTEE_RPC_CMD_SHM_ALLOC 6
71/* Memory that can be shared with a non-secure user space application */
72#define OPTEE_RPC_SHM_TYPE_APPL 0
73/* Memory only shared with non-secure kernel */
74#define OPTEE_RPC_SHM_TYPE_KERNEL 1
75
76/*
77 * Free shared memory previously allocated with OPTEE_RPC_CMD_SHM_ALLOC
78 *
79 * [in] value[0].a Type of memory one of
80 * OPTEE_RPC_SHM_TYPE_* above
81 * [in] value[0].b Value of shared memory reference or cookie
82 */
83#define OPTEE_RPC_CMD_SHM_FREE 7
84
85/*
86 * Issue master requests (read and write operations) to an I2C chip.
87 *
88 * [in] value[0].a Transfer mode (OPTEE_RPC_I2C_TRANSFER_*)
89 * [in] value[0].b The I2C bus (a.k.a adapter).
90 * 16 bit field.
91 * [in] value[0].c The I2C chip (a.k.a address).
92 * 16 bit field (either 7 or 10 bit effective).
93 * [in] value[1].a The I2C master control flags (ie, 10 bit address).
94 * 16 bit field.
95 * [in/out] memref[2] Buffer used for data transfers.
96 * [out] value[3].a Number of bytes transferred by the REE.
97 */
98#define OPTEE_RPC_CMD_I2C_TRANSFER 21
99
100/* I2C master transfer modes */
101#define OPTEE_RPC_I2C_TRANSFER_RD 0
102#define OPTEE_RPC_I2C_TRANSFER_WR 1
103
104/* I2C master control flags */
105#define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
106
107/*
108 * Reset RPMB probing
109 *
110 * Releases an eventually already used RPMB devices and starts over searching
111 * for RPMB devices. Returns the kind of shared memory to use in subsequent
112 * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
113 *
114 * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for
115 * OPTEE_RPC_CMD_SHM_ALLOC
116 */
117#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22
118
119/*
120 * Probe next RPMB device
121 *
122 * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_*
123 * [out] value[0].b EXT CSD-slice 168 "RPMB Size"
124 * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count"
125 * [out] memref[1] Buffer with the raw CID
126 */
127#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23
128
129/* Type of RPMB device */
130#define OPTEE_RPC_RPMB_EMMC 0
131#define OPTEE_RPC_RPMB_UFS 1
132#define OPTEE_RPC_RPMB_NVME 2
133
134/*
135 * Replay Protected Memory Block access
136 *
137 * [in] memref[0] Frames to device
138 * [out] memref[1] Frames from device
139 */
140#define OPTEE_RPC_CMD_RPMB_FRAMES 24
141
142#endif /*__OPTEE_RPC_CMD_H*/