tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2
3menuconfig RC_CORE
4 tristate "Remote Controller support"
5 depends on INPUT
6 help
7 Enable support for Remote Controllers on Linux. This is
8 needed in order to support several video capture adapters,
9 standalone IR receivers/transmitters, and RF receivers.
10
11 Enable this option if you have a video capture board even
12 if you don't need IR, as otherwise, you may not be able to
13 compile the driver for your adapter.
14
15 Say Y when you have a TV or an IR device.
16
17if RC_CORE
18
19config BPF_LIRC_MODE2
20 bool "Support for eBPF programs attached to lirc devices"
21 depends on BPF_SYSCALL
22 depends on RC_CORE=y
23 depends on LIRC
24 help
25 Allow attaching eBPF programs to a lirc device using the bpf(2)
26 syscall command BPF_PROG_ATTACH. This is supported for raw IR
27 receivers.
28
29 These eBPF programs can be used to decode IR into scancodes, for
30 IR protocols not supported by the kernel decoders.
31
32config LIRC
33 bool "LIRC user interface"
34 help
35 Enable this option to enable the Linux Infrared Remote
36 Control user interface (e.g. /dev/lirc*). This interface
37 passes raw IR to and from userspace, which is needed for
38 IR transmitting (aka "blasting") and for the lirc daemon.
39
40source "drivers/media/rc/keymaps/Kconfig"
41
42menuconfig RC_DECODERS
43 bool "Remote controller decoders"
44
45if RC_DECODERS
46
47config IR_IMON_DECODER
48 tristate "Enable IR raw decoder for the iMON protocol"
49 help
50 Enable this option if you have iMON PAD or Antec Veris infrared
51 remote control and you would like to use it with a raw IR
52 receiver, or if you wish to use an encoder to transmit this IR.
53
54config IR_JVC_DECODER
55 tristate "Enable IR raw decoder for the JVC protocol"
56 select BITREVERSE
57
58 help
59 Enable this option if you have an infrared remote control which
60 uses the JVC protocol, and you need software decoding support.
61
62config IR_MCE_KBD_DECODER
63 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
64 select BITREVERSE
65
66 help
67 Enable this option if you have a Microsoft Remote Keyboard for
68 Windows Media Center Edition, which you would like to use with
69 a raw IR receiver in your system.
70
71config IR_NEC_DECODER
72 tristate "Enable IR raw decoder for the NEC protocol"
73 select BITREVERSE
74
75 help
76 Enable this option if you have IR with NEC protocol, and
77 if the IR is decoded in software
78
79config IR_RC5_DECODER
80 tristate "Enable IR raw decoder for the RC-5 protocol"
81 select BITREVERSE
82
83 help
84 Enable this option if you have IR with RC-5 protocol, and
85 if the IR is decoded in software
86
87config IR_RC6_DECODER
88 tristate "Enable IR raw decoder for the RC6 protocol"
89 select BITREVERSE
90
91 help
92 Enable this option if you have an infrared remote control which
93 uses the RC6 protocol, and you need software decoding support.
94
95config IR_RCMM_DECODER
96 tristate "Enable IR raw decoder for the RC-MM protocol"
97 help
98 Enable this option when you have IR with RC-MM protocol, and
99 you need the software decoder. The driver supports 12,
100 24 and 32 bits RC-MM variants. You can enable or disable the
101 different modes using the following RC protocol keywords:
102 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
103
104 To compile this driver as a module, choose M here: the module
105 will be called ir-rcmm-decoder.
106
107config IR_SANYO_DECODER
108 tristate "Enable IR raw decoder for the Sanyo protocol"
109 select BITREVERSE
110
111 help
112 Enable this option if you have an infrared remote control which
113 uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
114 and you need software decoding support.
115
116config IR_SHARP_DECODER
117 tristate "Enable IR raw decoder for the Sharp protocol"
118 select BITREVERSE
119
120 help
121 Enable this option if you have an infrared remote control which
122 uses the Sharp protocol (Sharp, Denon), and you need software
123 decoding support.
124
125config IR_SONY_DECODER
126 tristate "Enable IR raw decoder for the Sony protocol"
127 select BITREVERSE
128
129 help
130 Enable this option if you have an infrared remote control which
131 uses the Sony protocol, and you need software decoding support.
132
133config IR_XMP_DECODER
134 tristate "Enable IR raw decoder for the XMP protocol"
135 select BITREVERSE
136
137 help
138 Enable this option if you have IR with XMP protocol, and
139 if the IR is decoded in software
140
141endif #RC_DECODERS
142
143menuconfig RC_DEVICES
144 bool "Remote Controller devices"
145
146if RC_DEVICES
147
148config IR_ENE
149 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
150 depends on PNP || COMPILE_TEST
151 depends on HAS_IOPORT
152 help
153 Say Y here to enable support for integrated infrared receiver
154 /transceiver made by ENE.
155
156 You can see if you have it by looking at lspnp output.
157 Output should include ENE0100 ENE0200 or something similar.
158
159 To compile this driver as a module, choose M here: the
160 module will be called ene_ir.
161
162config IR_FINTEK
163 tristate "Fintek Consumer Infrared Transceiver"
164 depends on PNP || COMPILE_TEST
165 depends on HAS_IOPORT
166 help
167 Say Y here to enable support for integrated infrared receiver
168 /transceiver made by Fintek. This chip is found on assorted
169 Jetway motherboards (and of course, possibly others).
170
171 To compile this driver as a module, choose M here: the
172 module will be called fintek-cir.
173
174config IR_GPIO_CIR
175 tristate "GPIO IR remote control"
176 depends on (OF && GPIOLIB) || COMPILE_TEST
177 help
178 Say Y if you want to use GPIO based IR Receiver.
179
180 To compile this driver as a module, choose M here: the module will
181 be called gpio-ir-recv.
182
183config IR_GPIO_TX
184 tristate "GPIO IR Bit Banging Transmitter"
185 depends on LIRC
186 depends on (OF && GPIOLIB) || COMPILE_TEST
187 depends on !PREEMPT_RT
188 help
189 Say Y if you want to a GPIO based IR transmitter. This is a
190 bit banging driver.
191
192 To compile this driver as a module, choose M here: the module will
193 be called gpio-ir-tx.
194
195config IR_HIX5HD2
196 tristate "Hisilicon hix5hd2 IR remote control"
197 depends on (OF && HAS_IOMEM) || COMPILE_TEST
198 help
199 Say Y here if you want to use hisilicon hix5hd2 remote control.
200 To compile this driver as a module, choose M here: the module will be
201 called ir-hix5hd2.
202
203 If you're not sure, select N here
204
205config IR_IGORPLUGUSB
206 tristate "IgorPlug-USB IR Receiver"
207 depends on USB
208 help
209 Say Y here if you want to use the IgorPlug-USB IR Receiver by
210 Igor Cesko. This device is included on the Fit-PC2.
211
212 Note that this device can only record bursts of 36 IR pulses and
213 spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
214
215 To compile this driver as a module, choose M here: the module will
216 be called igorplugusb.
217
218config IR_IGUANA
219 tristate "IguanaWorks USB IR Transceiver"
220 depends on USB
221 help
222 Say Y here if you want to use the IguanaWorks USB IR Transceiver.
223 Both infrared receive and send are supported. If you want to
224 change the ID or the pin config, use the user space driver from
225 IguanaWorks.
226
227 Only firmware 0x0205 and later is supported.
228
229 To compile this driver as a module, choose M here: the module will
230 be called iguanair.
231
232config IR_IMON
233 tristate "SoundGraph iMON Receiver and Display"
234 depends on USB
235 help
236 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
237 IR Receiver and/or LCD/VFD/VGA display.
238
239 To compile this driver as a module, choose M here: the
240 module will be called imon.
241
242config IR_IMON_RAW
243 tristate "SoundGraph iMON Receiver (early raw IR models)"
244 depends on USB
245 help
246 Say Y here if you want to use a SoundGraph iMON IR Receiver,
247 early raw models.
248
249 To compile this driver as a module, choose M here: the
250 module will be called imon_raw.
251
252config IR_ITE_CIR
253 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
254 depends on PNP || COMPILE_TEST
255 depends on HAS_IOPORT
256 help
257 Say Y here to enable support for integrated infrared receivers
258 /transceivers made by ITE Tech Inc. These are found in
259 several ASUS devices, like the ASUS Digimatrix or the ASUS
260 EEEBox 1501U.
261
262 To compile this driver as a module, choose M here: the
263 module will be called ite-cir.
264
265config IR_MCEUSB
266 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
267 depends on USB
268 help
269 Say Y here if you want to use a Windows Media Center Edition
270 eHome Infrared Transceiver.
271
272 To compile this driver as a module, choose M here: the
273 module will be called mceusb.
274
275config IR_MESON
276 tristate "Amlogic Meson IR remote receiver"
277 depends on ARCH_MESON || COMPILE_TEST
278 select REGMAP_MMIO
279 help
280 Say Y if you want to use the IR remote receiver available
281 on Amlogic Meson SoCs.
282
283 To compile this driver as a module, choose M here: the
284 module will be called meson-ir.
285
286config IR_MESON_TX
287 tristate "Amlogic Meson IR TX"
288 depends on ARCH_MESON || COMPILE_TEST
289 help
290 Say Y if you want to use the IR transmitter available on
291 Amlogic Meson SoCs.
292
293 To compile this driver as a module, choose M here: the
294 module will be called meson-ir-tx.
295
296config IR_MTK
297 tristate "Mediatek IR remote receiver"
298 depends on ARCH_MEDIATEK || COMPILE_TEST
299 help
300 Say Y if you want to use the IR remote receiver available
301 on Mediatek SoCs.
302
303 To compile this driver as a module, choose M here: the
304 module will be called mtk-cir.
305
306config IR_NUVOTON
307 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
308 depends on PNP || COMPILE_TEST
309 depends on HAS_IOPORT
310 help
311 Say Y here to enable support for integrated infrared receiver
312 /transceiver made by Nuvoton (formerly Winbond). This chip is
313 found in the ASRock ION 330HT, as well as assorted Intel
314 DP55-series motherboards (and of course, possibly others).
315
316 To compile this driver as a module, choose M here: the
317 module will be called nuvoton-cir.
318
319config IR_PWM_TX
320 tristate "PWM IR transmitter"
321 depends on LIRC
322 depends on PWM
323 depends on HIGH_RES_TIMERS
324 depends on OF
325 help
326 Say Y if you want to use a PWM based IR transmitter. This is
327 more power efficient than the bit banging gpio driver.
328
329 To compile this driver as a module, choose M here: the module will
330 be called pwm-ir-tx.
331
332config IR_REDRAT3
333 tristate "RedRat3 IR Transceiver"
334 depends on USB
335 select NEW_LEDS
336 select LEDS_CLASS
337 help
338 Say Y here if you want to use a RedRat3 Infrared Transceiver.
339
340 To compile this driver as a module, choose M here: the
341 module will be called redrat3.
342
343config IR_SERIAL
344 tristate "Homebrew Serial Port Receiver"
345 depends on HAS_IOPORT
346 help
347 Say Y if you want to use Homebrew Serial Port Receivers and
348 Transceivers.
349
350 To compile this driver as a module, choose M here: the module will
351 be called serial-ir.
352
353config IR_SERIAL_TRANSMITTER
354 bool "Serial Port Transmitter"
355 depends on IR_SERIAL
356 help
357 Serial Port Transmitter support
358
359config IR_SPI
360 tristate "SPI connected IR LED"
361 depends on SPI && LIRC
362 depends on OF
363 help
364 Say Y if you want to use an IR LED connected through SPI bus.
365
366 To compile this driver as a module, choose M here: the module will be
367 called ir-spi.
368
369config IR_STREAMZAP
370 tristate "Streamzap PC Remote IR Receiver"
371 depends on USB
372 help
373 Say Y here if you want to use a Streamzap PC Remote
374 Infrared Receiver.
375
376 To compile this driver as a module, choose M here: the
377 module will be called streamzap.
378
379config IR_SUNXI
380 tristate "SUNXI IR remote control"
381 depends on ARCH_SUNXI || COMPILE_TEST
382 help
383 Say Y if you want to use sunXi internal IR Controller
384
385 To compile this driver as a module, choose M here: the module will
386 be called sunxi-ir.
387
388config IR_TOY
389 tristate "Infrared Toy and IR Droid"
390 depends on USB
391 help
392 Say Y here if you want to use the Infrared Toy or IR Droid, USB
393 versions.
394
395 To compile this driver as a module, choose M here: the module will be
396 called ir_toy.
397
398config IR_TTUSBIR
399 tristate "TechnoTrend USB IR Receiver"
400 depends on USB
401 select NEW_LEDS
402 select LEDS_CLASS
403 help
404 Say Y here if you want to use the TechnoTrend USB IR Receiver. The
405 driver can control the led.
406
407 To compile this driver as a module, choose M here: the module will
408 be called ttusbir.
409
410config IR_WINBOND_CIR
411 tristate "Winbond IR remote control"
412 depends on (X86 && PNP) || COMPILE_TEST
413 depends on HAS_IOPORT
414 select NEW_LEDS
415 select LEDS_CLASS
416 select BITREVERSE
417 help
418 Say Y here if you want to use the IR remote functionality found
419 in some Winbond SuperI/O chips. Currently only the WPCD376I
420 chip is supported (included in some Intel Media series
421 motherboards).
422
423 To compile this driver as a module, choose M here: the module will
424 be called winbond_cir.
425
426config RC_ATI_REMOTE
427 tristate "ATI / X10 based USB RF remote controls"
428 depends on USB
429 help
430 Say Y here if you want to use an X10 based USB remote control.
431 These are RF remotes with USB receivers.
432
433 Such devices include the ATI remote that comes with many of ATI's
434 All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
435 Medion RF remote, and SnapStream FireFly remote.
436
437 This driver provides mouse pointer, left and right mouse buttons,
438 and maps all the other remote buttons to keypress events.
439
440 To compile this driver as a module, choose M here: the module will be
441 called ati_remote.
442
443config RC_LOOPBACK
444 tristate "Remote Control Loopback Driver"
445 help
446 Say Y here if you want support for the remote control loopback
447 driver which allows TX data to be sent back as RX data.
448 This is mostly useful for debugging purposes.
449
450 If you're not sure, select N here.
451
452 To compile this driver as a module, choose M here: the module will
453 be called rc_loopback.
454
455config RC_ST
456 tristate "ST remote control receiver"
457 depends on ARCH_STI || COMPILE_TEST
458 help
459 Say Y here if you want support for ST remote control driver
460 which allows both IR and UHF RX.
461 The driver passes raw pulse and space information to the LIRC decoder.
462
463 If you're not sure, select N here.
464
465config RC_XBOX_DVD
466 tristate "Xbox DVD Movie Playback Kit"
467 depends on USB
468 help
469 Say Y here if you want to use the Xbox DVD Movie Playback Kit.
470 These are IR remotes with USB receivers for the Original Xbox (2001).
471
472 To compile this driver as a module, choose M here: the module will be
473 called xbox_remote.
474
475source "drivers/media/rc/img-ir/Kconfig"
476
477endif #RC_DEVICES
478
479endif #RC_CORE