tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en
2KernelVersion: 5.18
3Contact: linux-iio@vger.kernel.org
4Description:
5 Toggle enable. Write 1 to enable toggle or 0 to disable it. This
6 is useful when one wants to change the DAC output codes. For
7 autonomous toggling, the way it should be done is:
8
9 - disable toggle operation;
10 - change out_currentY_rawN, where N is the integer value of the symbol;
11 - enable toggle operation.
12
13What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN
14KernelVersion: 5.18
15Contact: linux-iio@vger.kernel.org
16Description:
17 This attribute has the same meaning as out_currentY_raw. It is
18 specific to toggle enabled channels and refers to the DAC output
19 code in INPUT_N (_rawN), where N is the integer value of the symbol.
20 The same scale and offset as in out_currentY_raw applies.
21
22What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol
23KernelVersion: 5.18
24Contact: linux-iio@vger.kernel.org
25Description:
26 Performs a SW switch to a predefined output symbol. This attribute
27 is specific to toggle enabled channels and allows switching between
28 multiple predefined symbols. Each symbol corresponds to a different
29 output, denoted as out_currentY_rawN, where N is the integer value
30 of the symbol. Writing an integer value N will select out_currentY_rawN.
31
32What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
33KernelVersion: 5.18
34Contact: linux-iio@vger.kernel.org
35Description:
36 Toggle enable. Write 1 to enable toggle or 0 to disable it. This
37 is useful when one wants to change the DAC output codes. For
38 autonomous toggling, the way it should be done is:
39
40 - disable toggle operation;
41 - change out_voltageY_rawN, where N is the integer value of the symbol;
42 - enable toggle operation.
43
44What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN
45KernelVersion: 5.18
46Contact: linux-iio@vger.kernel.org
47Description:
48 This attribute has the same meaning as out_currentY_raw. It is
49 specific to toggle enabled channels and refers to the DAC output
50 code in INPUT_N (_rawN), where N is the integer value of the symbol.
51 The same scale and offset as in out_currentY_raw applies.
52
53What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
54KernelVersion: 5.18
55Contact: linux-iio@vger.kernel.org
56Description:
57 Performs a SW switch to a predefined output symbol. This attribute
58 is specific to toggle enabled channels and allows switching between
59 multiple predefined symbols. Each symbol corresponds to a different
60 output, denoted as out_voltageY_rawN, where N is the integer value
61 of the symbol. Writing an integer value N will select out_voltageY_rawN.