tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# This test is for checking bridge neighbor suppression functionality. The
5# topology consists of two bridges (VTEPs) connected using VXLAN. A single
6# host is connected to each bridge over multiple VLANs. The test checks that
7# ARP/NS messages from the first host are suppressed on the VXLAN port when
8# should.
9#
10# +-----------------------+ +------------------------+
11# | h1 | | h2 |
12# | | | |
13# | + eth0.10 | | + eth0.10 |
14# | | 192.0.2.1/28 | | | 192.0.2.2/28 |
15# | | 2001:db8:1::1/64 | | | 2001:db8:1::2/64 |
16# | | | | | |
17# | | + eth0.20 | | | + eth0.20 |
18# | \ | 192.0.2.17/28 | | \ | 192.0.2.18/28 |
19# | \ | 2001:db8:2::1/64 | | \ | 2001:db8:2::2/64 |
20# | \| | | \| |
21# | + eth0 | | + eth0 |
22# +----|------------------+ +----|-------------------+
23# | |
24# | |
25# +----|-------------------------------+ +----|-------------------------------+
26# | + swp1 + vx0 | | + swp1 + vx0 |
27# | | | | | | | |
28# | | br0 | | | | | |
29# | +------------+-----------+ | | +------------+-----------+ |
30# | | | | | |
31# | | | | | |
32# | +---+---+ | | +---+---+ |
33# | | | | | | | |
34# | | | | | | | |
35# | + + | | + + |
36# | br0.10 br0.20 | | br0.10 br0.20 |
37# | | | |
38# | 192.0.2.33 | | 192.0.2.34 |
39# | + lo | | + lo |
40# | | | |
41# | | | |
42# | 192.0.2.49/28 | | 192.0.2.50/28 |
43# | veth0 +-------+ veth0 |
44# | | | |
45# | sw1 | | sw2 |
46# +------------------------------------+ +------------------------------------+
47
48source lib.sh
49ret=0
50
51# All tests in this script. Can be overridden with -t option.
52TESTS="
53 neigh_suppress_arp
54 neigh_suppress_ns
55 neigh_vlan_suppress_arp
56 neigh_vlan_suppress_ns
57"
58VERBOSE=0
59PAUSE_ON_FAIL=no
60PAUSE=no
61
62################################################################################
63# Utilities
64
65log_test()
66{
67 local rc=$1
68 local expected=$2
69 local msg="$3"
70
71 if [ ${rc} -eq ${expected} ]; then
72 printf "TEST: %-60s [ OK ]\n" "${msg}"
73 nsuccess=$((nsuccess+1))
74 else
75 ret=1
76 nfail=$((nfail+1))
77 printf "TEST: %-60s [FAIL]\n" "${msg}"
78 if [ "$VERBOSE" = "1" ]; then
79 echo " rc=$rc, expected $expected"
80 fi
81
82 if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
83 echo
84 echo "hit enter to continue, 'q' to quit"
85 read a
86 [ "$a" = "q" ] && exit 1
87 fi
88 fi
89
90 if [ "${PAUSE}" = "yes" ]; then
91 echo
92 echo "hit enter to continue, 'q' to quit"
93 read a
94 [ "$a" = "q" ] && exit 1
95 fi
96
97 [ "$VERBOSE" = "1" ] && echo
98}
99
100run_cmd()
101{
102 local cmd="$1"
103 local out
104 local stderr="2>/dev/null"
105
106 if [ "$VERBOSE" = "1" ]; then
107 printf "COMMAND: $cmd\n"
108 stderr=
109 fi
110
111 out=$(eval $cmd $stderr)
112 rc=$?
113 if [ "$VERBOSE" = "1" -a -n "$out" ]; then
114 echo " $out"
115 fi
116
117 return $rc
118}
119
120tc_check_packets()
121{
122 local ns=$1; shift
123 local id=$1; shift
124 local handle=$1; shift
125 local count=$1; shift
126 local pkts
127
128 sleep 0.1
129 pkts=$(tc -n $ns -j -s filter show $id \
130 | jq ".[] | select(.options.handle == $handle) | \
131 .options.actions[0].stats.packets")
132 [[ $pkts == $count ]]
133}
134
135################################################################################
136# Setup
137
138setup_topo_ns()
139{
140 local ns=$1; shift
141
142 ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
143 ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
144 ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
145 ip netns exec $ns sysctl -qw net.ipv6.conf.default.accept_dad=0
146}
147
148setup_topo()
149{
150 local ns
151
152 setup_ns h1 h2 sw1 sw2
153 for ns in $h1 $h2 $sw1 $sw2; do
154 setup_topo_ns $ns
155 done
156
157 ip -n $h1 link add name eth0 type veth peer name swp1 netns $sw1
158 ip -n $sw1 link add name veth0 type veth peer name veth0 netns $sw2
159 ip -n $h2 link add name eth0 type veth peer name swp1 netns $sw2
160}
161
162setup_host_common()
163{
164 local ns=$1; shift
165 local v4addr1=$1; shift
166 local v4addr2=$1; shift
167 local v6addr1=$1; shift
168 local v6addr2=$1; shift
169
170 ip -n $ns link set dev eth0 up
171 ip -n $ns link add link eth0 name eth0.10 up type vlan id 10
172 ip -n $ns link add link eth0 name eth0.20 up type vlan id 20
173
174 ip -n $ns address add $v4addr1 dev eth0.10
175 ip -n $ns address add $v4addr2 dev eth0.20
176 ip -n $ns address add $v6addr1 dev eth0.10
177 ip -n $ns address add $v6addr2 dev eth0.20
178}
179
180setup_h1()
181{
182 local ns=$h1
183 local v4addr1=192.0.2.1/28
184 local v4addr2=192.0.2.17/28
185 local v6addr1=2001:db8:1::1/64
186 local v6addr2=2001:db8:2::1/64
187
188 setup_host_common $ns $v4addr1 $v4addr2 $v6addr1 $v6addr2
189}
190
191setup_h2()
192{
193 local ns=$h2
194 local v4addr1=192.0.2.2/28
195 local v4addr2=192.0.2.18/28
196 local v6addr1=2001:db8:1::2/64
197 local v6addr2=2001:db8:2::2/64
198
199 setup_host_common $ns $v4addr1 $v4addr2 $v6addr1 $v6addr2
200}
201
202setup_sw_common()
203{
204 local ns=$1; shift
205 local local_addr=$1; shift
206 local remote_addr=$1; shift
207 local veth_addr=$1; shift
208 local gw_addr=$1; shift
209
210 ip -n $ns address add $local_addr/32 dev lo
211
212 ip -n $ns link set dev veth0 up
213 ip -n $ns address add $veth_addr/28 dev veth0
214 ip -n $ns route add default via $gw_addr
215
216 ip -n $ns link add name br0 up type bridge vlan_filtering 1 \
217 vlan_default_pvid 0 mcast_snooping 0
218
219 ip -n $ns link add link br0 name br0.10 up type vlan id 10
220 bridge -n $ns vlan add vid 10 dev br0 self
221
222 ip -n $ns link add link br0 name br0.20 up type vlan id 20
223 bridge -n $ns vlan add vid 20 dev br0 self
224
225 ip -n $ns link set dev swp1 up master br0
226 bridge -n $ns vlan add vid 10 dev swp1
227 bridge -n $ns vlan add vid 20 dev swp1
228
229 ip -n $ns link add name vx0 up master br0 type vxlan \
230 local $local_addr dstport 4789 nolearning external
231 bridge -n $ns fdb add 00:00:00:00:00:00 dev vx0 self static \
232 dst $remote_addr src_vni 10010
233 bridge -n $ns fdb add 00:00:00:00:00:00 dev vx0 self static \
234 dst $remote_addr src_vni 10020
235 bridge -n $ns link set dev vx0 vlan_tunnel on learning off
236
237 bridge -n $ns vlan add vid 10 dev vx0
238 bridge -n $ns vlan add vid 10 dev vx0 tunnel_info id 10010
239
240 bridge -n $ns vlan add vid 20 dev vx0
241 bridge -n $ns vlan add vid 20 dev vx0 tunnel_info id 10020
242}
243
244setup_sw1()
245{
246 local ns=$sw1
247 local local_addr=192.0.2.33
248 local remote_addr=192.0.2.34
249 local veth_addr=192.0.2.49
250 local gw_addr=192.0.2.50
251
252 setup_sw_common $ns $local_addr $remote_addr $veth_addr $gw_addr
253}
254
255setup_sw2()
256{
257 local ns=$sw2
258 local local_addr=192.0.2.34
259 local remote_addr=192.0.2.33
260 local veth_addr=192.0.2.50
261 local gw_addr=192.0.2.49
262
263 setup_sw_common $ns $local_addr $remote_addr $veth_addr $gw_addr
264}
265
266setup()
267{
268 set -e
269
270 setup_topo
271 setup_h1
272 setup_h2
273 setup_sw1
274 setup_sw2
275
276 sleep 5
277
278 set +e
279}
280
281cleanup()
282{
283 cleanup_ns $h1 $h2 $sw1 $sw2
284}
285
286################################################################################
287# Tests
288
289neigh_suppress_arp_common()
290{
291 local vid=$1; shift
292 local sip=$1; shift
293 local tip=$1; shift
294 local h2_mac
295
296 echo
297 echo "Per-port ARP suppression - VLAN $vid"
298 echo "----------------------------------"
299
300 run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
301 run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
302
303 # Initial state - check that ARP requests are not suppressed and that
304 # ARP replies are received.
305 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
306 log_test $? 0 "arping"
307 tc_check_packets $sw1 "dev vx0 egress" 101 1
308 log_test $? 0 "ARP suppression"
309
310 # Enable neighbor suppression and check that nothing changes compared
311 # to the initial state.
312 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
313 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
314 log_test $? 0 "\"neigh_suppress\" is on"
315
316 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
317 log_test $? 0 "arping"
318 tc_check_packets $sw1 "dev vx0 egress" 101 2
319 log_test $? 0 "ARP suppression"
320
321 # Install an FDB entry for the remote host and check that nothing
322 # changes compared to the initial state.
323 h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
324 run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
325 log_test $? 0 "FDB entry installation"
326
327 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
328 log_test $? 0 "arping"
329 tc_check_packets $sw1 "dev vx0 egress" 101 3
330 log_test $? 0 "ARP suppression"
331
332 # Install a neighbor on the matching SVI interface and check that ARP
333 # requests are suppressed.
334 run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
335 log_test $? 0 "Neighbor entry installation"
336
337 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
338 log_test $? 0 "arping"
339 tc_check_packets $sw1 "dev vx0 egress" 101 3
340 log_test $? 0 "ARP suppression"
341
342 # Take the second host down and check that ARP requests are suppressed
343 # and that ARP replies are received.
344 run_cmd "ip -n $h2 link set dev eth0.$vid down"
345 log_test $? 0 "H2 down"
346
347 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
348 log_test $? 0 "arping"
349 tc_check_packets $sw1 "dev vx0 egress" 101 3
350 log_test $? 0 "ARP suppression"
351
352 run_cmd "ip -n $h2 link set dev eth0.$vid up"
353 log_test $? 0 "H2 up"
354
355 # Disable neighbor suppression and check that ARP requests are no
356 # longer suppressed.
357 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
358 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
359 log_test $? 0 "\"neigh_suppress\" is off"
360
361 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
362 log_test $? 0 "arping"
363 tc_check_packets $sw1 "dev vx0 egress" 101 4
364 log_test $? 0 "ARP suppression"
365
366 # Take the second host down and check that ARP requests are not
367 # suppressed and that ARP replies are not received.
368 run_cmd "ip -n $h2 link set dev eth0.$vid down"
369 log_test $? 0 "H2 down"
370
371 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
372 log_test $? 1 "arping"
373 tc_check_packets $sw1 "dev vx0 egress" 101 5
374 log_test $? 0 "ARP suppression"
375}
376
377neigh_suppress_arp()
378{
379 local vid=10
380 local sip=192.0.2.1
381 local tip=192.0.2.2
382
383 neigh_suppress_arp_common $vid $sip $tip
384
385 vid=20
386 sip=192.0.2.17
387 tip=192.0.2.18
388 neigh_suppress_arp_common $vid $sip $tip
389}
390
391neigh_suppress_ns_common()
392{
393 local vid=$1; shift
394 local saddr=$1; shift
395 local daddr=$1; shift
396 local maddr=$1; shift
397 local h2_mac
398
399 echo
400 echo "Per-port NS suppression - VLAN $vid"
401 echo "---------------------------------"
402
403 run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
404 run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
405
406 # Initial state - check that NS messages are not suppressed and that ND
407 # messages are received.
408 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
409 log_test $? 0 "ndisc6"
410 tc_check_packets $sw1 "dev vx0 egress" 101 1
411 log_test $? 0 "NS suppression"
412
413 # Enable neighbor suppression and check that nothing changes compared
414 # to the initial state.
415 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
416 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
417 log_test $? 0 "\"neigh_suppress\" is on"
418
419 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
420 log_test $? 0 "ndisc6"
421 tc_check_packets $sw1 "dev vx0 egress" 101 2
422 log_test $? 0 "NS suppression"
423
424 # Install an FDB entry for the remote host and check that nothing
425 # changes compared to the initial state.
426 h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
427 run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
428 log_test $? 0 "FDB entry installation"
429
430 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
431 log_test $? 0 "ndisc6"
432 tc_check_packets $sw1 "dev vx0 egress" 101 3
433 log_test $? 0 "NS suppression"
434
435 # Install a neighbor on the matching SVI interface and check that NS
436 # messages are suppressed.
437 run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
438 log_test $? 0 "Neighbor entry installation"
439
440 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
441 log_test $? 0 "ndisc6"
442 tc_check_packets $sw1 "dev vx0 egress" 101 3
443 log_test $? 0 "NS suppression"
444
445 # Take the second host down and check that NS messages are suppressed
446 # and that ND messages are received.
447 run_cmd "ip -n $h2 link set dev eth0.$vid down"
448 log_test $? 0 "H2 down"
449
450 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
451 log_test $? 0 "ndisc6"
452 tc_check_packets $sw1 "dev vx0 egress" 101 3
453 log_test $? 0 "NS suppression"
454
455 run_cmd "ip -n $h2 link set dev eth0.$vid up"
456 log_test $? 0 "H2 up"
457
458 # Disable neighbor suppression and check that NS messages are no longer
459 # suppressed.
460 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
461 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
462 log_test $? 0 "\"neigh_suppress\" is off"
463
464 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
465 log_test $? 0 "ndisc6"
466 tc_check_packets $sw1 "dev vx0 egress" 101 4
467 log_test $? 0 "NS suppression"
468
469 # Take the second host down and check that NS messages are not
470 # suppressed and that ND messages are not received.
471 run_cmd "ip -n $h2 link set dev eth0.$vid down"
472 log_test $? 0 "H2 down"
473
474 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
475 log_test $? 2 "ndisc6"
476 tc_check_packets $sw1 "dev vx0 egress" 101 5
477 log_test $? 0 "NS suppression"
478}
479
480neigh_suppress_ns()
481{
482 local vid=10
483 local saddr=2001:db8:1::1
484 local daddr=2001:db8:1::2
485 local maddr=ff02::1:ff00:2
486
487 neigh_suppress_ns_common $vid $saddr $daddr $maddr
488
489 vid=20
490 saddr=2001:db8:2::1
491 daddr=2001:db8:2::2
492 maddr=ff02::1:ff00:2
493
494 neigh_suppress_ns_common $vid $saddr $daddr $maddr
495}
496
497neigh_vlan_suppress_arp()
498{
499 local vid1=10
500 local vid2=20
501 local sip1=192.0.2.1
502 local sip2=192.0.2.17
503 local tip1=192.0.2.2
504 local tip2=192.0.2.18
505 local h2_mac1
506 local h2_mac2
507
508 echo
509 echo "Per-{Port, VLAN} ARP suppression"
510 echo "--------------------------------"
511
512 run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
513 run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
514 run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
515
516 h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
517 h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
518 run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
519 run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
520 run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
521 run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
522
523 # Enable per-{Port, VLAN} neighbor suppression and check that ARP
524 # requests are not suppressed and that ARP replies are received.
525 run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
526 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
527 log_test $? 0 "\"neigh_vlan_suppress\" is on"
528
529 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
530 log_test $? 0 "arping (VLAN $vid1)"
531 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
532 log_test $? 0 "arping (VLAN $vid2)"
533
534 tc_check_packets $sw1 "dev vx0 egress" 101 1
535 log_test $? 0 "ARP suppression (VLAN $vid1)"
536 tc_check_packets $sw1 "dev vx0 egress" 102 1
537 log_test $? 0 "ARP suppression (VLAN $vid2)"
538
539 # Enable neighbor suppression on VLAN 10 and check that only on this
540 # VLAN ARP requests are suppressed.
541 run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
542 run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
543 log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
544 run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
545 log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
546
547 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
548 log_test $? 0 "arping (VLAN $vid1)"
549 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
550 log_test $? 0 "arping (VLAN $vid2)"
551
552 tc_check_packets $sw1 "dev vx0 egress" 101 1
553 log_test $? 0 "ARP suppression (VLAN $vid1)"
554 tc_check_packets $sw1 "dev vx0 egress" 102 2
555 log_test $? 0 "ARP suppression (VLAN $vid2)"
556
557 # Enable neighbor suppression on the port and check that it has no
558 # effect compared to previous state.
559 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
560 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
561 log_test $? 0 "\"neigh_suppress\" is on"
562
563 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
564 log_test $? 0 "arping (VLAN $vid1)"
565 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
566 log_test $? 0 "arping (VLAN $vid2)"
567
568 tc_check_packets $sw1 "dev vx0 egress" 101 1
569 log_test $? 0 "ARP suppression (VLAN $vid1)"
570 tc_check_packets $sw1 "dev vx0 egress" 102 3
571 log_test $? 0 "ARP suppression (VLAN $vid2)"
572
573 # Disable neighbor suppression on the port and check that it has no
574 # effect compared to previous state.
575 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
576 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
577 log_test $? 0 "\"neigh_suppress\" is off"
578
579 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
580 log_test $? 0 "arping (VLAN $vid1)"
581 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
582 log_test $? 0 "arping (VLAN $vid2)"
583
584 tc_check_packets $sw1 "dev vx0 egress" 101 1
585 log_test $? 0 "ARP suppression (VLAN $vid1)"
586 tc_check_packets $sw1 "dev vx0 egress" 102 4
587 log_test $? 0 "ARP suppression (VLAN $vid2)"
588
589 # Disable neighbor suppression on VLAN 10 and check that ARP requests
590 # are no longer suppressed on this VLAN.
591 run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
592 run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
593 log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
594
595 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
596 log_test $? 0 "arping (VLAN $vid1)"
597 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
598 log_test $? 0 "arping (VLAN $vid2)"
599
600 tc_check_packets $sw1 "dev vx0 egress" 101 2
601 log_test $? 0 "ARP suppression (VLAN $vid1)"
602 tc_check_packets $sw1 "dev vx0 egress" 102 5
603 log_test $? 0 "ARP suppression (VLAN $vid2)"
604
605 # Disable per-{Port, VLAN} neighbor suppression, enable neighbor
606 # suppression on the port and check that on both VLANs ARP requests are
607 # suppressed.
608 run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
609 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
610 log_test $? 0 "\"neigh_vlan_suppress\" is off"
611
612 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
613 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
614 log_test $? 0 "\"neigh_suppress\" is on"
615
616 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
617 log_test $? 0 "arping (VLAN $vid1)"
618 run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
619 log_test $? 0 "arping (VLAN $vid2)"
620
621 tc_check_packets $sw1 "dev vx0 egress" 101 2
622 log_test $? 0 "ARP suppression (VLAN $vid1)"
623 tc_check_packets $sw1 "dev vx0 egress" 102 5
624 log_test $? 0 "ARP suppression (VLAN $vid2)"
625}
626
627neigh_vlan_suppress_ns()
628{
629 local vid1=10
630 local vid2=20
631 local saddr1=2001:db8:1::1
632 local saddr2=2001:db8:2::1
633 local daddr1=2001:db8:1::2
634 local daddr2=2001:db8:2::2
635 local maddr=ff02::1:ff00:2
636 local h2_mac1
637 local h2_mac2
638
639 echo
640 echo "Per-{Port, VLAN} NS suppression"
641 echo "-------------------------------"
642
643 run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
644 run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
645 run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
646
647 h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
648 h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
649 run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
650 run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
651 run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
652 run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
653
654 # Enable per-{Port, VLAN} neighbor suppression and check that NS
655 # messages are not suppressed and that ND messages are received.
656 run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
657 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
658 log_test $? 0 "\"neigh_vlan_suppress\" is on"
659
660 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
661 log_test $? 0 "ndisc6 (VLAN $vid1)"
662 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
663 log_test $? 0 "ndisc6 (VLAN $vid2)"
664
665 tc_check_packets $sw1 "dev vx0 egress" 101 1
666 log_test $? 0 "NS suppression (VLAN $vid1)"
667 tc_check_packets $sw1 "dev vx0 egress" 102 1
668 log_test $? 0 "NS suppression (VLAN $vid2)"
669
670 # Enable neighbor suppression on VLAN 10 and check that only on this
671 # VLAN NS messages are suppressed.
672 run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
673 run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
674 log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
675 run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
676 log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
677
678 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
679 log_test $? 0 "ndisc6 (VLAN $vid1)"
680 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
681 log_test $? 0 "ndisc6 (VLAN $vid2)"
682
683 tc_check_packets $sw1 "dev vx0 egress" 101 1
684 log_test $? 0 "NS suppression (VLAN $vid1)"
685 tc_check_packets $sw1 "dev vx0 egress" 102 2
686 log_test $? 0 "NS suppression (VLAN $vid2)"
687
688 # Enable neighbor suppression on the port and check that it has no
689 # effect compared to previous state.
690 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
691 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
692 log_test $? 0 "\"neigh_suppress\" is on"
693
694 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
695 log_test $? 0 "ndisc6 (VLAN $vid1)"
696 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
697 log_test $? 0 "ndisc6 (VLAN $vid2)"
698
699 tc_check_packets $sw1 "dev vx0 egress" 101 1
700 log_test $? 0 "NS suppression (VLAN $vid1)"
701 tc_check_packets $sw1 "dev vx0 egress" 102 3
702 log_test $? 0 "NS suppression (VLAN $vid2)"
703
704 # Disable neighbor suppression on the port and check that it has no
705 # effect compared to previous state.
706 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
707 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
708 log_test $? 0 "\"neigh_suppress\" is off"
709
710 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
711 log_test $? 0 "ndisc6 (VLAN $vid1)"
712 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
713 log_test $? 0 "ndisc6 (VLAN $vid2)"
714
715 tc_check_packets $sw1 "dev vx0 egress" 101 1
716 log_test $? 0 "NS suppression (VLAN $vid1)"
717 tc_check_packets $sw1 "dev vx0 egress" 102 4
718 log_test $? 0 "NS suppression (VLAN $vid2)"
719
720 # Disable neighbor suppression on VLAN 10 and check that NS messages
721 # are no longer suppressed on this VLAN.
722 run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
723 run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
724 log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
725
726 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
727 log_test $? 0 "ndisc6 (VLAN $vid1)"
728 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
729 log_test $? 0 "ndisc6 (VLAN $vid2)"
730
731 tc_check_packets $sw1 "dev vx0 egress" 101 2
732 log_test $? 0 "NS suppression (VLAN $vid1)"
733 tc_check_packets $sw1 "dev vx0 egress" 102 5
734 log_test $? 0 "NS suppression (VLAN $vid2)"
735
736 # Disable per-{Port, VLAN} neighbor suppression, enable neighbor
737 # suppression on the port and check that on both VLANs NS messages are
738 # suppressed.
739 run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
740 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
741 log_test $? 0 "\"neigh_vlan_suppress\" is off"
742
743 run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
744 run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
745 log_test $? 0 "\"neigh_suppress\" is on"
746
747 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
748 log_test $? 0 "ndisc6 (VLAN $vid1)"
749 run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
750 log_test $? 0 "ndisc6 (VLAN $vid2)"
751
752 tc_check_packets $sw1 "dev vx0 egress" 101 2
753 log_test $? 0 "NS suppression (VLAN $vid1)"
754 tc_check_packets $sw1 "dev vx0 egress" 102 5
755 log_test $? 0 "NS suppression (VLAN $vid2)"
756}
757
758################################################################################
759# Usage
760
761usage()
762{
763 cat <<EOF
764usage: ${0##*/} OPTS
765
766 -t <test> Test(s) to run (default: all)
767 (options: $TESTS)
768 -p Pause on fail
769 -P Pause after each test before cleanup
770 -v Verbose mode (show commands and output)
771EOF
772}
773
774################################################################################
775# Main
776
777trap cleanup EXIT
778
779while getopts ":t:pPvh" opt; do
780 case $opt in
781 t) TESTS=$OPTARG;;
782 p) PAUSE_ON_FAIL=yes;;
783 P) PAUSE=yes;;
784 v) VERBOSE=$(($VERBOSE + 1));;
785 h) usage; exit 0;;
786 *) usage; exit 1;;
787 esac
788done
789
790# Make sure we don't pause twice.
791[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
792
793if [ "$(id -u)" -ne 0 ];then
794 echo "SKIP: Need root privileges"
795 exit $ksft_skip;
796fi
797
798if [ ! -x "$(command -v ip)" ]; then
799 echo "SKIP: Could not run test without ip tool"
800 exit $ksft_skip
801fi
802
803if [ ! -x "$(command -v bridge)" ]; then
804 echo "SKIP: Could not run test without bridge tool"
805 exit $ksft_skip
806fi
807
808if [ ! -x "$(command -v tc)" ]; then
809 echo "SKIP: Could not run test without tc tool"
810 exit $ksft_skip
811fi
812
813if [ ! -x "$(command -v arping)" ]; then
814 echo "SKIP: Could not run test without arping tool"
815 exit $ksft_skip
816fi
817
818if [ ! -x "$(command -v ndisc6)" ]; then
819 echo "SKIP: Could not run test without ndisc6 tool"
820 exit $ksft_skip
821fi
822
823if [ ! -x "$(command -v jq)" ]; then
824 echo "SKIP: Could not run test without jq tool"
825 exit $ksft_skip
826fi
827
828bridge link help 2>&1 | grep -q "neigh_vlan_suppress"
829if [ $? -ne 0 ]; then
830 echo "SKIP: iproute2 bridge too old, missing per-VLAN neighbor suppression support"
831 exit $ksft_skip
832fi
833
834# Start clean.
835cleanup
836
837for t in $TESTS
838do
839 setup; $t; cleanup;
840done
841
842if [ "$TESTS" != "none" ]; then
843 printf "\nTests passed: %3d\n" ${nsuccess}
844 printf "Tests failed: %3d\n" ${nfail}
845fi
846
847exit $ret