Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_MTK
23 tristate
24 select FW_LOADER
25
26config BT_HCIBTUSB
27 tristate "HCI USB driver"
28 depends on USB
29 select BT_INTEL
30 help
31 Bluetooth HCI USB driver.
32 This driver is required if you want to use Bluetooth devices with
33 USB interface.
34
35 Say Y here to compile support for Bluetooth USB devices into the
36 kernel or say M to compile it as module (btusb).
37
38config BT_HCIBTUSB_AUTOSUSPEND
39 bool "Enable USB autosuspend for Bluetooth USB devices by default"
40 depends on BT_HCIBTUSB
41 help
42 Say Y here to enable USB autosuspend for Bluetooth USB devices by
43 default.
44
45 This can be overridden by passing btusb.enable_autosuspend=[y|n]
46 on the kernel commandline.
47
48config BT_HCIBTUSB_POLL_SYNC
49 bool "Enable USB poll_sync for Bluetooth USB devices by default"
50 depends on BT_HCIBTUSB
51 default y
52 help
53 poll_sync synchronizes the USB data and event endpoints by
54 prioritizing the later.
55
56 Say Y here to enable USB poll_sync for Bluetooth USB devices by
57 default.
58
59config BT_HCIBTUSB_BCM
60 bool "Broadcom protocol support"
61 depends on BT_HCIBTUSB
62 select BT_BCM
63 default y
64 help
65 The Broadcom protocol support enables firmware and patchram
66 download support for Broadcom Bluetooth controllers.
67
68 Say Y here to compile support for Broadcom protocol.
69
70config BT_HCIBTUSB_MTK
71 bool "MediaTek protocol support"
72 depends on BT_HCIBTUSB
73 select BT_MTK
74 default n
75 help
76 The MediaTek protocol support enables firmware download
77 support and chip initialization for MediaTek Bluetooth
78 USB controllers.
79
80 Say Y here to compile support for MediaTek protocol.
81
82config BT_HCIBTUSB_RTL
83 bool "Realtek protocol support"
84 depends on BT_HCIBTUSB
85 select BT_RTL
86 default y
87 help
88 The Realtek protocol support enables firmware and configuration
89 download support for Realtek Bluetooth controllers.
90
91 Say Y here to compile support for Realtek protocol.
92
93config BT_HCIBTSDIO
94 tristate "HCI SDIO driver"
95 depends on MMC
96 help
97 Bluetooth HCI SDIO driver.
98 This driver is required if you want to use Bluetooth device with
99 SDIO interface.
100
101 Say Y here to compile support for Bluetooth SDIO devices into the
102 kernel or say M to compile it as module (btsdio).
103
104config BT_HCIUART
105 tristate "HCI UART driver"
106 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
107 depends on NVMEM || !NVMEM
108 depends on POWER_SEQUENCING || !POWER_SEQUENCING
109 depends on TTY
110 help
111 Bluetooth HCI UART driver.
112 This driver is required if you want to use Bluetooth devices with
113 serial port interface. You will also need this driver if you have
114 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
115 adapter and BrainBoxes Bluetooth PC Card.
116
117 Say Y here to compile support for Bluetooth UART devices into the
118 kernel or say M to compile it as module (hci_uart).
119
120config BT_HCIUART_SERDEV
121 bool
122 depends on SERIAL_DEV_BUS && BT_HCIUART
123 default y
124
125config BT_HCIUART_H4
126 bool "UART (H4) protocol support"
127 depends on BT_HCIUART
128 help
129 UART (H4) is serial protocol for communication between Bluetooth
130 device and host. This protocol is required for most Bluetooth devices
131 with UART interface, including PCMCIA and CF cards.
132
133 Say Y here to compile support for HCI UART (H4) protocol.
134
135config BT_HCIUART_NOKIA
136 tristate "UART Nokia H4+ protocol support"
137 depends on BT_HCIUART
138 depends on BT_HCIUART_SERDEV
139 depends on GPIOLIB
140 depends on PM
141 select BT_HCIUART_H4
142 select BT_BCM
143 help
144 Nokia H4+ is serial protocol for communication between Bluetooth
145 device and host. This protocol is required for Bluetooth devices
146 with UART interface in Nokia devices.
147
148 Say Y here to compile support for Nokia's H4+ protocol.
149
150config BT_HCIUART_BCSP
151 bool "BCSP protocol support"
152 depends on BT_HCIUART
153 select BITREVERSE
154 help
155 BCSP (BlueCore Serial Protocol) is serial protocol for communication
156 between Bluetooth device and host. This protocol is required for non
157 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
158 CF cards.
159
160 Say Y here to compile support for HCI BCSP protocol.
161
162config BT_HCIUART_ATH3K
163 bool "Atheros AR300x serial support"
164 depends on BT_HCIUART
165 select BT_HCIUART_H4
166 help
167 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
168 communication between host and Atheros AR300x Bluetooth devices.
169 This protocol enables AR300x chips to be enabled with
170 power management support.
171 Enable this if you have Atheros AR300x serial Bluetooth device.
172
173 Say Y here to compile support for HCI UART ATH3K protocol.
174
175config BT_HCIUART_LL
176 bool "HCILL protocol support"
177 depends on BT_HCIUART_SERDEV
178 select BT_HCIUART_H4
179 help
180 HCILL (HCI Low Level) is a serial protocol for communication
181 between Bluetooth device and host. This protocol is required for
182 serial Bluetooth devices that are based on Texas Instruments'
183 BRF chips.
184
185 Say Y here to compile support for HCILL protocol.
186
187config BT_HCIUART_3WIRE
188 bool "Three-wire UART (H5) protocol support"
189 depends on BT_HCIUART
190 depends on BT_HCIUART_SERDEV
191 help
192 The HCI Three-wire UART Transport Layer makes it possible to
193 user the Bluetooth HCI over a serial port interface. The HCI
194 Three-wire UART Transport Layer assumes that the UART
195 communication may have bit errors, overrun errors or burst
196 errors and thereby making CTS/RTS lines unnecessary.
197
198 Say Y here to compile support for Three-wire UART protocol.
199
200config BT_HCIUART_INTEL
201 bool "Intel protocol support"
202 depends on BT_HCIUART
203 depends on GPIOLIB
204 select BT_HCIUART_H4
205 select BT_INTEL
206 help
207 The Intel protocol support enables Bluetooth HCI over serial
208 port interface for Intel Bluetooth controllers.
209
210 Say Y here to compile support for Intel protocol.
211
212config BT_HCIUART_BCM
213 bool "Broadcom protocol support"
214 depends on BT_HCIUART
215 depends on BT_HCIUART_SERDEV
216 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
217 depends on GPIOLIB
218 select BT_HCIUART_H4
219 select BT_BCM
220 help
221 The Broadcom protocol support enables Bluetooth HCI over serial
222 port interface for Broadcom Bluetooth controllers.
223
224 Say Y here to compile support for Broadcom protocol.
225
226config BT_HCIUART_RTL
227 bool "Realtek protocol support"
228 depends on BT_HCIUART
229 depends on BT_HCIUART_SERDEV
230 depends on GPIOLIB
231 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
232 select BT_HCIUART_3WIRE
233 select BT_RTL
234 help
235 The Realtek protocol support enables Bluetooth HCI over 3-Wire
236 serial port interface for Realtek Bluetooth controllers.
237
238 Say Y here to compile support for Realtek protocol.
239
240config BT_HCIUART_QCA
241 bool "Qualcomm Atheros protocol support"
242 depends on BT_HCIUART
243 depends on BT_HCIUART_SERDEV
244 select BT_HCIUART_H4
245 select BT_QCA
246 help
247 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
248 over serial port interface(H4) between controller and host.
249 This protocol is required for UART clock control for QCA Bluetooth
250 devices.
251
252 Say Y here to compile support for QCA protocol.
253
254config BT_HCIUART_AG6XX
255 bool "Intel AG6XX protocol support"
256 depends on BT_HCIUART
257 select BT_HCIUART_H4
258 select BT_INTEL
259 help
260 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
261 port interface for Intel ibt 2.1 Bluetooth controllers.
262
263 Say Y here to compile support for Intel AG6XX protocol.
264
265config BT_HCIUART_MRVL
266 bool "Marvell protocol support"
267 depends on BT_HCIUART
268 depends on BT_HCIUART_SERDEV
269 select BT_HCIUART_H4
270 help
271 Marvell is serial protocol for communication between Bluetooth
272 device and host. This protocol is required for most Marvell Bluetooth
273 devices with UART interface.
274
275 Say Y here to compile support for HCI MRVL protocol.
276
277config BT_HCIBCM203X
278 tristate "HCI BCM203x USB driver"
279 depends on USB
280 select FW_LOADER
281 help
282 Bluetooth HCI BCM203x USB driver.
283 This driver provides the firmware loading mechanism for the Broadcom
284 Blutonium based devices.
285
286 Say Y here to compile support for HCI BCM203x devices into the
287 kernel or say M to compile it as module (bcm203x).
288
289
290config BT_HCIBCM4377
291 tristate "HCI BCM4377/4378/4387/4388 PCIe driver"
292 depends on PCI
293 select FW_LOADER
294 help
295 Support for Broadcom BCM4377/4378/4387/4388 Bluetooth chipsets
296 attached via PCIe. These are usually found in Apple machines.
297
298 Say Y here to compile support for HCI BCM4377 family devices into the
299 kernel or say M to compile it as module (hci_bcm4377).
300
301config BT_HCIBPA10X
302 tristate "HCI BPA10x USB driver"
303 depends on USB
304 help
305 Bluetooth HCI BPA10x USB driver.
306 This driver provides support for the Digianswer BPA 100/105 Bluetooth
307 sniffer devices.
308
309 Say Y here to compile support for HCI BPA10x devices into the
310 kernel or say M to compile it as module (bpa10x).
311
312config BT_HCIBFUSB
313 tristate "HCI BlueFRITZ! USB driver"
314 depends on USB
315 select FW_LOADER
316 help
317 Bluetooth HCI BlueFRITZ! USB driver.
318 This driver provides support for Bluetooth USB devices with AVM
319 interface:
320 AVM BlueFRITZ! USB
321
322 Say Y here to compile support for HCI BFUSB devices into the
323 kernel or say M to compile it as module (bfusb).
324
325config BT_HCIDTL1
326 tristate "HCI DTL1 (PC Card) driver"
327 depends on PCMCIA
328 help
329 Bluetooth HCI DTL1 (PC Card) driver.
330 This driver provides support for Bluetooth PCMCIA devices with
331 Nokia DTL1 interface:
332 Nokia Bluetooth Card
333 Socket Bluetooth CF Card
334
335 Say Y here to compile support for HCI DTL1 devices into the
336 kernel or say M to compile it as module (dtl1_cs).
337
338config BT_HCIBT3C
339 tristate "HCI BT3C (PC Card) driver"
340 depends on PCMCIA
341 select FW_LOADER
342 help
343 Bluetooth HCI BT3C (PC Card) driver.
344 This driver provides support for Bluetooth PCMCIA devices with
345 3Com BT3C interface:
346 3Com Bluetooth Card (3CRWB6096)
347 HP Bluetooth Card
348
349 Say Y here to compile support for HCI BT3C devices into the
350 kernel or say M to compile it as module (bt3c_cs).
351
352config BT_HCIBLUECARD
353 tristate "HCI BlueCard (PC Card) driver"
354 depends on PCMCIA
355 help
356 Bluetooth HCI BlueCard (PC Card) driver.
357 This driver provides support for Bluetooth PCMCIA devices with
358 Anycom BlueCard interface:
359 Anycom Bluetooth PC Card
360 Anycom Bluetooth CF Card
361
362 Say Y here to compile support for HCI BlueCard devices into the
363 kernel or say M to compile it as module (bluecard_cs).
364
365config BT_HCIVHCI
366 tristate "HCI VHCI (Virtual HCI device) driver"
367 select WANT_DEV_COREDUMP
368 help
369 Bluetooth Virtual HCI device driver.
370 This driver is required if you want to use HCI Emulation software.
371
372 Say Y here to compile support for virtual HCI devices into the
373 kernel or say M to compile it as module (hci_vhci).
374
375config BT_MRVL
376 tristate "Marvell Bluetooth driver support"
377 help
378 The core driver to support Marvell Bluetooth devices.
379
380 This driver is required if you want to support
381 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
382
383 Say Y here to compile Marvell Bluetooth driver
384 into the kernel or say M to compile it as module.
385
386config BT_MRVL_SDIO
387 tristate "Marvell BT-over-SDIO driver"
388 depends on BT_MRVL && MMC
389 select FW_LOADER
390 select WANT_DEV_COREDUMP
391 help
392 The driver for Marvell Bluetooth chipsets with SDIO interface.
393
394 This driver is required if you want to use Marvell Bluetooth
395 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
396 chipsets are supported.
397
398 Say Y here to compile support for Marvell BT-over-SDIO driver
399 into the kernel or say M to compile it as module.
400
401config BT_ATH3K
402 tristate "Atheros firmware download driver"
403 depends on BT_HCIBTUSB
404 select FW_LOADER
405 help
406 Bluetooth firmware download driver.
407 This driver loads the firmware into the Atheros Bluetooth
408 chipset.
409
410 Say Y here to compile support for "Atheros firmware download driver"
411 into the kernel or say M to compile it as module (ath3k).
412
413config BT_MTKSDIO
414 tristate "MediaTek HCI SDIO driver"
415 depends on MMC
416 depends on USB || !BT_HCIBTUSB_MTK
417 select BT_MTK
418 help
419 MediaTek Bluetooth HCI SDIO driver.
420 This driver is required if you want to use MediaTek Bluetooth
421 with SDIO interface.
422
423 Say Y here to compile support for MediaTek Bluetooth SDIO devices
424 into the kernel or say M to compile it as module (btmtksdio).
425
426config BT_MTKUART
427 tristate "MediaTek HCI UART driver"
428 depends on SERIAL_DEV_BUS
429 depends on USB || !BT_HCIBTUSB_MTK
430 select BT_MTK
431 help
432 MediaTek Bluetooth HCI UART driver.
433 This driver is required if you want to use MediaTek Bluetooth
434 with serial interface.
435
436 Say Y here to compile support for MediaTek Bluetooth UART devices
437 into the kernel or say M to compile it as module (btmtkuart).
438
439config BT_QCOMSMD
440 tristate "Qualcomm SMD based HCI support"
441 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
442 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
443 select BT_QCA
444 help
445 Qualcomm SMD based HCI driver.
446 This driver is used to bridge HCI data onto the shared memory
447 channels to the WCNSS core.
448
449 Say Y here to compile support for HCI over Qualcomm SMD into the
450 kernel or say M to compile as a module.
451
452config BT_HCIRSI
453 tristate
454 help
455 Redpine BT driver.
456 This driver handles BT traffic from upper layers and pass
457 to the RSI_91x coex module for further scheduling to device
458
459 Say Y here to compile support for HCI over Redpine into the
460 kernel or say M to compile as a module.
461
462config BT_VIRTIO
463 tristate "Virtio Bluetooth driver"
464 depends on VIRTIO
465 help
466 Virtio Bluetooth support driver.
467 This driver supports Virtio Bluetooth devices.
468
469 Say Y here to compile support for HCI over Virtio into the
470 kernel or say M to compile as a module.
471
472config BT_NXPUART
473 tristate "NXP protocol support"
474 depends on SERIAL_DEV_BUS
475 select CRC32
476 select CRC8
477 help
478 NXP is serial driver required for NXP Bluetooth
479 devices with UART interface.
480
481 Say Y here to compile support for NXP Bluetooth UART device into
482 the kernel, or say M here to compile as a module (btnxpuart).
483
484config BT_INTEL_PCIE
485 tristate "Intel HCI PCIe driver"
486 depends on PCI
487 select BT_INTEL
488 select FW_LOADER
489 help
490 Intel Bluetooth transport driver for PCIe.
491 This driver is required if you want to use Intel Bluetooth device
492 with PCIe interface.
493
494 Say Y here to compiler support for Intel Bluetooth PCIe device into
495 the kernel or say M to compile it as module (btintel_pcie)
496endmenu