tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Magnetometer sensors
4#
5# When adding new entries keep the list in alphabetical order
6
7menu "Magnetometer sensors"
8
9config AK8974
10 tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
11 depends on I2C
12 select REGMAP_I2C
13 select IIO_BUFFER
14 select IIO_TRIGGERED_BUFFER
15 help
16 Say yes here to build support for Asahi Kasei AK8974, AMI305 or
17 AMI306 I2C-based 3-axis magnetometer chips.
18
19 To compile this driver as a module, choose M here: the module
20 will be called ak8974.
21
22config AK8975
23 tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
24 depends on I2C
25 depends on GPIOLIB || COMPILE_TEST
26 select IIO_BUFFER
27 select IIO_TRIGGERED_BUFFER
28 help
29 Say yes here to build support for Asahi Kasei AK8975, AK8963,
30 AK09911, AK09912 or AK09916 3-Axis Magnetometer.
31
32 To compile this driver as a module, choose M here: the module
33 will be called ak8975.
34
35config AK09911
36 tristate "Asahi Kasei AK09911 3-axis Compass"
37 depends on I2C
38 depends on GPIOLIB || COMPILE_TEST
39 select AK8975
40 help
41 Deprecated: AK09911 is now supported by AK8975 driver.
42
43config BMC150_MAGN
44 tristate
45 select IIO_BUFFER
46 select IIO_TRIGGERED_BUFFER
47
48config BMC150_MAGN_I2C
49 tristate "Bosch BMC150 I2C Magnetometer Driver"
50 depends on I2C
51 select BMC150_MAGN
52 select REGMAP_I2C
53 help
54 Say yes here to build support for the BMC150 magnetometer with
55 I2C interface.
56
57 This is a combo module with both accelerometer and magnetometer.
58 This driver is only implementing magnetometer part, which has
59 its own address and register map.
60
61 This driver also supports I2C Bosch BMC156 and BMM150 chips.
62 To compile this driver as a module, choose M here: the module will be
63 called bmc150_magn_i2c.
64
65config BMC150_MAGN_SPI
66 tristate "Bosch BMC150 SPI Magnetometer Driver"
67 depends on SPI
68 select BMC150_MAGN
69 select REGMAP_SPI
70 help
71 Say yes here to build support for the BMC150 magnetometer with
72 SPI interface.
73
74 This is a combo module with both accelerometer and magnetometer.
75 This driver is only implementing magnetometer part, which has
76 its own address and register map.
77
78 This driver also supports SPI Bosch BMC156 and BMM150 chips.
79 To compile this driver as a module, choose M here: the module will be
80 called bmc150_magn_spi.
81
82config MAG3110
83 tristate "Freescale MAG3110 3-Axis Magnetometer"
84 depends on I2C
85 select IIO_BUFFER
86 select IIO_TRIGGERED_BUFFER
87 help
88 Say yes here to build support for the Freescale MAG3110 3-Axis
89 magnetometer.
90
91 To compile this driver as a module, choose M here: the module
92 will be called mag3110.
93
94config HID_SENSOR_MAGNETOMETER_3D
95 depends on HID_SENSOR_HUB
96 select IIO_BUFFER
97 select HID_SENSOR_IIO_COMMON
98 select HID_SENSOR_IIO_TRIGGER
99 tristate "HID Magenetometer 3D"
100 help
101 Say yes here to build support for the HID SENSOR
102 Magnetometer 3D.
103
104config MMC35240
105 tristate "MEMSIC MMC35240 3-axis magnetic sensor"
106 select REGMAP_I2C
107 depends on I2C
108 help
109 Say yes here to build support for the MEMSIC MMC35240 3-axis
110 magnetic sensor.
111
112 To compile this driver as a module, choose M here: the module
113 will be called mmc35240.
114
115config IIO_ST_MAGN_3AXIS
116 tristate "STMicroelectronics magnetometers 3-Axis Driver"
117 depends on (I2C || SPI_MASTER) && SYSFS
118 select IIO_ST_SENSORS_CORE
119 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
120 help
121 Say yes here to build support for STMicroelectronics magnetometers:
122 LSM303DLHC, LSM303DLM, LIS3MDL.
123
124 Also need to enable at least one of I2C and SPI interface drivers
125 below.
126
127config IIO_ST_MAGN_I2C_3AXIS
128 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
129 depends on I2C && IIO_ST_MAGN_3AXIS
130 default I2C && IIO_ST_MAGN_3AXIS
131 select IIO_ST_SENSORS_I2C
132 help
133 Build support for STMicroelectronics magnetometers I2C interface.
134
135 To compile this driver as a module, choose M here. The module
136 will be called st_magn_i2c.
137
138config IIO_ST_MAGN_SPI_3AXIS
139 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
140 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
141 default SPI_MASTER && IIO_ST_MAGN_3AXIS
142 select IIO_ST_SENSORS_SPI
143 help
144 Build support for STMicroelectronics magnetometers SPI interface.
145
146 To compile this driver as a module, choose M here. The module
147 will be called st_magn_spi.
148
149config SENSORS_HMC5843
150 tristate
151 select IIO_BUFFER
152 select IIO_TRIGGERED_BUFFER
153
154config SENSORS_HMC5843_I2C
155 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
156 depends on I2C
157 select SENSORS_HMC5843
158 select REGMAP_I2C
159 help
160 Say Y here to add support for the Honeywell HMC5843, HMC5883 and
161 HMC5883L 3-Axis Magnetometer (digital compass).
162
163 This driver can also be compiled as a set of modules.
164 If so, these modules will be created:
165 - hmc5843_core (core functions)
166 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
167
168config SENSORS_HMC5843_SPI
169 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
170 depends on SPI_MASTER
171 select SENSORS_HMC5843
172 select REGMAP_SPI
173 help
174 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
175 (digital compass).
176
177 This driver can also be compiled as a set of modules.
178 If so, these modules will be created:
179 - hmc5843_core (core functions)
180 - hmc5843_spi (support for HMC5983)
181
182config SENSORS_RM3100
183 tristate
184 select IIO_BUFFER
185 select IIO_TRIGGERED_BUFFER
186
187config SENSORS_RM3100_I2C
188 tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
189 depends on I2C
190 select SENSORS_RM3100
191 select REGMAP_I2C
192 help
193 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
194
195 This driver can also be compiled as a module.
196 To compile this driver as a module, choose M here: the module
197 will be called rm3100-i2c.
198
199config SENSORS_RM3100_SPI
200 tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
201 depends on SPI_MASTER
202 select SENSORS_RM3100
203 select REGMAP_SPI
204 help
205 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
206
207 This driver can also be compiled as a module.
208 To compile this driver as a module, choose M here: the module
209 will be called rm3100-spi.
210
211config YAMAHA_YAS530
212 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)"
213 depends on I2C
214 select REGMAP_I2C
215 select IIO_BUFFER
216 select IIO_TRIGGERED_BUFFER
217 help
218 Say Y here to add support for the Yamaha YAS530 series of
219 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
220 supported.
221
222 This driver can also be compiled as a module.
223 To compile this driver as a module, choose M here: the module
224 will be called yamaha-yas.
225
226endmenu