Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * Based on arch/arm/include/asm/memory.h
4 *
5 * Copyright (C) 2000-2002 Russell King
6 * Copyright (C) 2012 ARM Ltd.
7 *
8 * Note: this file should not be included by non-asm/.h files
9 */
10#ifndef __ASM_MEMORY_H
11#define __ASM_MEMORY_H
12
13#include <linux/const.h>
14#include <linux/sizes.h>
15#include <asm/page-def.h>
16
17/*
18 * Size of the PCI I/O space. This must remain a power of two so that
19 * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses.
20 */
21#define PCI_IO_SIZE SZ_16M
22
23/*
24 * VMEMMAP_SIZE - allows the whole linear region to be covered by
25 * a struct page array
26 *
27 * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE
28 * needs to cover the memory region from the beginning of the 52-bit
29 * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to
30 * keep a constant PAGE_OFFSET and "fallback" to using the higher end
31 * of the VMEMMAP where 52-bit support is not available in hardware.
32 */
33#define VMEMMAP_SHIFT (PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT)
34#define VMEMMAP_SIZE ((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) >> VMEMMAP_SHIFT)
35
36/*
37 * PAGE_OFFSET - the virtual address of the start of the linear map, at the
38 * start of the TTBR1 address space.
39 * PAGE_END - the end of the linear map, where all other kernel mappings begin.
40 * KIMAGE_VADDR - the virtual address of the start of the kernel image.
41 * VA_BITS - the maximum number of bits for virtual addresses.
42 */
43#define VA_BITS (CONFIG_ARM64_VA_BITS)
44#define _PAGE_OFFSET(va) (-(UL(1) << (va)))
45#define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS))
46#define KIMAGE_VADDR (MODULES_END)
47#define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
48#define MODULES_VADDR (_PAGE_END(VA_BITS_MIN))
49#define MODULES_VSIZE (SZ_128M)
50#define VMEMMAP_START (-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
51#define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE)
52#define PCI_IO_END (VMEMMAP_START - SZ_8M)
53#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
54#define FIXADDR_TOP (VMEMMAP_START - SZ_32M)
55
56#if VA_BITS > 48
57#define VA_BITS_MIN (48)
58#else
59#define VA_BITS_MIN (VA_BITS)
60#endif
61
62#define _PAGE_END(va) (-(UL(1) << ((va) - 1)))
63
64#define KERNEL_START _text
65#define KERNEL_END _end
66
67/*
68 * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
69 * address space for the shadow region respectively. They can bloat the stack
70 * significantly, so double the (minimum) stack size when they are in use.
71 */
72#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
73#define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
74#define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
75 + KASAN_SHADOW_OFFSET)
76#define PAGE_END (KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
77#define KASAN_THREAD_SHIFT 1
78#else
79#define KASAN_THREAD_SHIFT 0
80#define PAGE_END (_PAGE_END(VA_BITS_MIN))
81#endif /* CONFIG_KASAN */
82
83#define MIN_THREAD_SHIFT (14 + KASAN_THREAD_SHIFT)
84
85/*
86 * VMAP'd stacks are allocated at page granularity, so we must ensure that such
87 * stacks are a multiple of page size.
88 */
89#if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
90#define THREAD_SHIFT PAGE_SHIFT
91#else
92#define THREAD_SHIFT MIN_THREAD_SHIFT
93#endif
94
95#if THREAD_SHIFT >= PAGE_SHIFT
96#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
97#endif
98
99#define THREAD_SIZE (UL(1) << THREAD_SHIFT)
100
101/*
102 * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
103 * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
104 * assembly.
105 */
106#ifdef CONFIG_VMAP_STACK
107#define THREAD_ALIGN (2 * THREAD_SIZE)
108#else
109#define THREAD_ALIGN THREAD_SIZE
110#endif
111
112#define IRQ_STACK_SIZE THREAD_SIZE
113
114#define OVERFLOW_STACK_SIZE SZ_4K
115
116/*
117 * With the minimum frame size of [x29, x30], exactly half the combined
118 * sizes of the hyp and overflow stacks is the maximum size needed to
119 * save the unwinded stacktrace; plus an additional entry to delimit the
120 * end.
121 */
122#define NVHE_STACKTRACE_SIZE ((OVERFLOW_STACK_SIZE + PAGE_SIZE) / 2 + sizeof(long))
123
124/*
125 * Alignment of kernel segments (e.g. .text, .data).
126 *
127 * 4 KB granule: 16 level 3 entries, with contiguous bit
128 * 16 KB granule: 4 level 3 entries, without contiguous bit
129 * 64 KB granule: 1 level 3 entry
130 */
131#define SEGMENT_ALIGN SZ_64K
132
133/*
134 * Memory types available.
135 *
136 * IMPORTANT: MT_NORMAL must be index 0 since vm_get_page_prot() may 'or' in
137 * the MT_NORMAL_TAGGED memory type for PROT_MTE mappings. Note
138 * that protection_map[] only contains MT_NORMAL attributes.
139 */
140#define MT_NORMAL 0
141#define MT_NORMAL_TAGGED 1
142#define MT_NORMAL_NC 2
143#define MT_DEVICE_nGnRnE 3
144#define MT_DEVICE_nGnRE 4
145
146/*
147 * Memory types for Stage-2 translation
148 */
149#define MT_S2_NORMAL 0xf
150#define MT_S2_DEVICE_nGnRE 0x1
151
152/*
153 * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001
154 * Stage-2 enforces Normal-WB and Device-nGnRE
155 */
156#define MT_S2_FWB_NORMAL 6
157#define MT_S2_FWB_DEVICE_nGnRE 1
158
159#ifdef CONFIG_ARM64_4K_PAGES
160#define IOREMAP_MAX_ORDER (PUD_SHIFT)
161#else
162#define IOREMAP_MAX_ORDER (PMD_SHIFT)
163#endif
164
165/*
166 * Open-coded (swapper_pg_dir - reserved_pg_dir) as this cannot be calculated
167 * until link time.
168 */
169#define RESERVED_SWAPPER_OFFSET (PAGE_SIZE)
170
171/*
172 * Open-coded (swapper_pg_dir - tramp_pg_dir) as this cannot be calculated
173 * until link time.
174 */
175#define TRAMP_SWAPPER_OFFSET (2 * PAGE_SIZE)
176
177#ifndef __ASSEMBLY__
178
179#include <linux/bitops.h>
180#include <linux/compiler.h>
181#include <linux/mmdebug.h>
182#include <linux/types.h>
183#include <asm/bug.h>
184
185#if VA_BITS > 48
186extern u64 vabits_actual;
187#else
188#define vabits_actual ((u64)VA_BITS)
189#endif
190
191extern s64 memstart_addr;
192/* PHYS_OFFSET - the physical address of the start of memory. */
193#define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
194
195/* the virtual base of the kernel image */
196extern u64 kimage_vaddr;
197
198/* the offset between the kernel virtual and physical mappings */
199extern u64 kimage_voffset;
200
201static inline unsigned long kaslr_offset(void)
202{
203 return kimage_vaddr - KIMAGE_VADDR;
204}
205
206/*
207 * Allow all memory at the discovery stage. We will clip it later.
208 */
209#define MIN_MEMBLOCK_ADDR 0
210#define MAX_MEMBLOCK_ADDR U64_MAX
211
212/*
213 * PFNs are used to describe any physical page; this means
214 * PFN 0 == physical address 0.
215 *
216 * This is the PFN of the first RAM page in the kernel
217 * direct-mapped view. We assume this is the first page
218 * of RAM in the mem_map as well.
219 */
220#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
221
222/*
223 * When dealing with data aborts, watchpoints, or instruction traps we may end
224 * up with a tagged userland pointer. Clear the tag to get a sane pointer to
225 * pass on to access_ok(), for instance.
226 */
227#define __untagged_addr(addr) \
228 ((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
229
230#define untagged_addr(addr) ({ \
231 u64 __addr = (__force u64)(addr); \
232 __addr &= __untagged_addr(__addr); \
233 (__force __typeof__(addr))__addr; \
234})
235
236#if defined(CONFIG_KASAN_SW_TAGS) || defined(CONFIG_KASAN_HW_TAGS)
237#define __tag_shifted(tag) ((u64)(tag) << 56)
238#define __tag_reset(addr) __untagged_addr(addr)
239#define __tag_get(addr) (__u8)((u64)(addr) >> 56)
240#else
241#define __tag_shifted(tag) 0UL
242#define __tag_reset(addr) (addr)
243#define __tag_get(addr) 0
244#endif /* CONFIG_KASAN_SW_TAGS || CONFIG_KASAN_HW_TAGS */
245
246static inline const void *__tag_set(const void *addr, u8 tag)
247{
248 u64 __addr = (u64)addr & ~__tag_shifted(0xff);
249 return (const void *)(__addr | __tag_shifted(tag));
250}
251
252#ifdef CONFIG_KASAN_HW_TAGS
253#define arch_enable_tagging_sync() mte_enable_kernel_sync()
254#define arch_enable_tagging_async() mte_enable_kernel_async()
255#define arch_enable_tagging_asymm() mte_enable_kernel_asymm()
256#define arch_force_async_tag_fault() mte_check_tfsr_exit()
257#define arch_get_random_tag() mte_get_random_tag()
258#define arch_get_mem_tag(addr) mte_get_mem_tag(addr)
259#define arch_set_mem_tag_range(addr, size, tag, init) \
260 mte_set_mem_tag_range((addr), (size), (tag), (init))
261#endif /* CONFIG_KASAN_HW_TAGS */
262
263/*
264 * Physical vs virtual RAM address space conversion. These are
265 * private definitions which should NOT be used outside memory.h
266 * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
267 */
268
269
270/*
271 * Check whether an arbitrary address is within the linear map, which
272 * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
273 * kernel's TTBR1 address range.
274 */
275#define __is_lm_address(addr) (((u64)(addr) - PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
276
277#define __lm_to_phys(addr) (((addr) - PAGE_OFFSET) + PHYS_OFFSET)
278#define __kimg_to_phys(addr) ((addr) - kimage_voffset)
279
280#define __virt_to_phys_nodebug(x) ({ \
281 phys_addr_t __x = (phys_addr_t)(__tag_reset(x)); \
282 __is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x); \
283})
284
285#define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x))
286
287#ifdef CONFIG_DEBUG_VIRTUAL
288extern phys_addr_t __virt_to_phys(unsigned long x);
289extern phys_addr_t __phys_addr_symbol(unsigned long x);
290#else
291#define __virt_to_phys(x) __virt_to_phys_nodebug(x)
292#define __phys_addr_symbol(x) __pa_symbol_nodebug(x)
293#endif /* CONFIG_DEBUG_VIRTUAL */
294
295#define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
296#define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset))
297
298/*
299 * Convert a page to/from a physical address
300 */
301#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
302#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
303
304/*
305 * Note: Drivers should NOT use these. They are the wrong
306 * translation for translating DMA addresses. Use the driver
307 * DMA support - see dma-mapping.h.
308 */
309#define virt_to_phys virt_to_phys
310static inline phys_addr_t virt_to_phys(const volatile void *x)
311{
312 return __virt_to_phys((unsigned long)(x));
313}
314
315#define phys_to_virt phys_to_virt
316static inline void *phys_to_virt(phys_addr_t x)
317{
318 return (void *)(__phys_to_virt(x));
319}
320
321/*
322 * Drivers should NOT use these either.
323 */
324#define __pa(x) __virt_to_phys((unsigned long)(x))
325#define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
326#define __pa_nodebug(x) __virt_to_phys_nodebug((unsigned long)(x))
327#define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x)))
328#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
329#define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x)))
330#define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x))
331
332/*
333 * virt_to_page(x) convert a _valid_ virtual address to struct page *
334 * virt_addr_valid(x) indicates whether a virtual address is valid
335 */
336#define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET)
337
338#if defined(CONFIG_DEBUG_VIRTUAL)
339#define page_to_virt(x) ({ \
340 __typeof__(x) __page = x; \
341 void *__addr = __va(page_to_phys(__page)); \
342 (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
343})
344#define virt_to_page(x) pfn_to_page(virt_to_pfn(x))
345#else
346#define page_to_virt(x) ({ \
347 __typeof__(x) __page = x; \
348 u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\
349 u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE); \
350 (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
351})
352
353#define virt_to_page(x) ({ \
354 u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE; \
355 u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page)); \
356 (struct page *)__addr; \
357})
358#endif /* CONFIG_DEBUG_VIRTUAL */
359
360#define virt_addr_valid(addr) ({ \
361 __typeof__(addr) __addr = __tag_reset(addr); \
362 __is_lm_address(__addr) && pfn_is_map_memory(virt_to_pfn(__addr)); \
363})
364
365void dump_mem_limit(void);
366
367static inline bool defer_reserve_crashkernel(void)
368{
369 return IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32);
370}
371#endif /* !ASSEMBLY */
372
373/*
374 * Given that the GIC architecture permits ITS implementations that can only be
375 * configured with a LPI table address once, GICv3 systems with many CPUs may
376 * end up reserving a lot of different regions after a kexec for their LPI
377 * tables (one per CPU), as we are forced to reuse the same memory after kexec
378 * (and thus reserve it persistently with EFI beforehand)
379 */
380#if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS)
381# define INIT_MEMBLOCK_RESERVED_REGIONS (INIT_MEMBLOCK_REGIONS + NR_CPUS + 1)
382#endif
383
384/*
385 * memory regions which marked with flag MEMBLOCK_NOMAP(for example, the memory
386 * of the EFI_UNUSABLE_MEMORY type) may divide a continuous memory block into
387 * multiple parts. As a result, the number of memory regions is large.
388 */
389#ifdef CONFIG_EFI
390#define INIT_MEMBLOCK_MEMORY_REGIONS (INIT_MEMBLOCK_REGIONS * 8)
391#endif
392
393#include <asm-generic/memory_model.h>
394
395#endif /* __ASM_MEMORY_H */