tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright (c) 2019 Baylibre, SAS.
3 * Author: Jerome Brunet <jbrunet@baylibre.com>
4 */
5
6#include <linux/bitfield.h>
7#include <linux/clk.h>
8#include <linux/clk-provider.h>
9#include <linux/device.h>
10#include <linux/io.h>
11#include <linux/iopoll.h>
12#include <linux/mdio-mux.h>
13#include <linux/module.h>
14#include <linux/phy.h>
15#include <linux/platform_device.h>
16
17#define ETH_PLL_STS 0x40
18#define ETH_PLL_CTL0 0x44
19#define PLL_CTL0_LOCK_DIG BIT(30)
20#define PLL_CTL0_RST BIT(29)
21#define PLL_CTL0_EN BIT(28)
22#define PLL_CTL0_SEL BIT(23)
23#define PLL_CTL0_N GENMASK(14, 10)
24#define PLL_CTL0_M GENMASK(8, 0)
25#define PLL_LOCK_TIMEOUT 1000000
26#define PLL_MUX_NUM_PARENT 2
27#define ETH_PLL_CTL1 0x48
28#define ETH_PLL_CTL2 0x4c
29#define ETH_PLL_CTL3 0x50
30#define ETH_PLL_CTL4 0x54
31#define ETH_PLL_CTL5 0x58
32#define ETH_PLL_CTL6 0x5c
33#define ETH_PLL_CTL7 0x60
34
35#define ETH_PHY_CNTL0 0x80
36#define EPHY_G12A_ID 0x33010180
37#define ETH_PHY_CNTL1 0x84
38#define PHY_CNTL1_ST_MODE GENMASK(2, 0)
39#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
40#define EPHY_DFLT_ADD 8
41#define PHY_CNTL1_MII_MODE GENMASK(15, 14)
42#define EPHY_MODE_RMII 0x1
43#define PHY_CNTL1_CLK_EN BIT(16)
44#define PHY_CNTL1_CLKFREQ BIT(17)
45#define PHY_CNTL1_PHY_ENB BIT(18)
46#define ETH_PHY_CNTL2 0x88
47#define PHY_CNTL2_USE_INTERNAL BIT(5)
48#define PHY_CNTL2_SMI_SRC_MAC BIT(6)
49#define PHY_CNTL2_RX_CLK_EPHY BIT(9)
50
51#define MESON_G12A_MDIO_EXTERNAL_ID 0
52#define MESON_G12A_MDIO_INTERNAL_ID 1
53
54struct g12a_mdio_mux {
55 bool pll_is_enabled;
56 void __iomem *regs;
57 void *mux_handle;
58 struct clk *pclk;
59 struct clk *pll;
60};
61
62struct g12a_ephy_pll {
63 void __iomem *base;
64 struct clk_hw hw;
65};
66
67#define g12a_ephy_pll_to_dev(_hw) \
68 container_of(_hw, struct g12a_ephy_pll, hw)
69
70static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw,
71 unsigned long parent_rate)
72{
73 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
74 u32 val, m, n;
75
76 val = readl(pll->base + ETH_PLL_CTL0);
77 m = FIELD_GET(PLL_CTL0_M, val);
78 n = FIELD_GET(PLL_CTL0_N, val);
79
80 return parent_rate * m / n;
81}
82
83static int g12a_ephy_pll_enable(struct clk_hw *hw)
84{
85 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
86 u32 val = readl(pll->base + ETH_PLL_CTL0);
87
88 /* Apply both enable an reset */
89 val |= PLL_CTL0_RST | PLL_CTL0_EN;
90 writel(val, pll->base + ETH_PLL_CTL0);
91
92 /* Clear the reset to let PLL lock */
93 val &= ~PLL_CTL0_RST;
94 writel(val, pll->base + ETH_PLL_CTL0);
95
96 /* Poll on the digital lock instead of the usual analog lock
97 * This is done because bit 31 is unreliable on some SoC. Bit
98 * 31 may indicate that the PLL is not lock even though the clock
99 * is actually running
100 */
101 return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val,
102 val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT);
103}
104
105static void g12a_ephy_pll_disable(struct clk_hw *hw)
106{
107 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
108 u32 val;
109
110 val = readl(pll->base + ETH_PLL_CTL0);
111 val &= ~PLL_CTL0_EN;
112 val |= PLL_CTL0_RST;
113 writel(val, pll->base + ETH_PLL_CTL0);
114}
115
116static int g12a_ephy_pll_is_enabled(struct clk_hw *hw)
117{
118 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
119 unsigned int val;
120
121 val = readl(pll->base + ETH_PLL_CTL0);
122
123 return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0;
124}
125
126static int g12a_ephy_pll_init(struct clk_hw *hw)
127{
128 struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
129
130 /* Apply PLL HW settings */
131 writel(0x29c0040a, pll->base + ETH_PLL_CTL0);
132 writel(0x927e0000, pll->base + ETH_PLL_CTL1);
133 writel(0xac5f49e5, pll->base + ETH_PLL_CTL2);
134 writel(0x00000000, pll->base + ETH_PLL_CTL3);
135 writel(0x00000000, pll->base + ETH_PLL_CTL4);
136 writel(0x20200000, pll->base + ETH_PLL_CTL5);
137 writel(0x0000c002, pll->base + ETH_PLL_CTL6);
138 writel(0x00000023, pll->base + ETH_PLL_CTL7);
139
140 return 0;
141}
142
143static const struct clk_ops g12a_ephy_pll_ops = {
144 .recalc_rate = g12a_ephy_pll_recalc_rate,
145 .is_enabled = g12a_ephy_pll_is_enabled,
146 .enable = g12a_ephy_pll_enable,
147 .disable = g12a_ephy_pll_disable,
148 .init = g12a_ephy_pll_init,
149};
150
151static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
152{
153 int ret;
154
155 /* Enable the phy clock */
156 if (!priv->pll_is_enabled) {
157 ret = clk_prepare_enable(priv->pll);
158 if (ret)
159 return ret;
160 }
161
162 priv->pll_is_enabled = true;
163
164 /* Initialize ephy control */
165 writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
166 writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
167 FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
168 FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
169 PHY_CNTL1_CLK_EN |
170 PHY_CNTL1_CLKFREQ |
171 PHY_CNTL1_PHY_ENB,
172 priv->regs + ETH_PHY_CNTL1);
173 writel(PHY_CNTL2_USE_INTERNAL |
174 PHY_CNTL2_SMI_SRC_MAC |
175 PHY_CNTL2_RX_CLK_EPHY,
176 priv->regs + ETH_PHY_CNTL2);
177
178 return 0;
179}
180
181static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv)
182{
183 /* Reset the mdio bus mux */
184 writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2);
185
186 /* Disable the phy clock if enabled */
187 if (priv->pll_is_enabled) {
188 clk_disable_unprepare(priv->pll);
189 priv->pll_is_enabled = false;
190 }
191
192 return 0;
193}
194
195static int g12a_mdio_switch_fn(int current_child, int desired_child,
196 void *data)
197{
198 struct g12a_mdio_mux *priv = dev_get_drvdata(data);
199
200 if (current_child == desired_child)
201 return 0;
202
203 switch (desired_child) {
204 case MESON_G12A_MDIO_EXTERNAL_ID:
205 return g12a_enable_external_mdio(priv);
206 case MESON_G12A_MDIO_INTERNAL_ID:
207 return g12a_enable_internal_mdio(priv);
208 default:
209 return -EINVAL;
210 }
211}
212
213static const struct of_device_id g12a_mdio_mux_match[] = {
214 { .compatible = "amlogic,g12a-mdio-mux", },
215 {},
216};
217MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match);
218
219static int g12a_ephy_glue_clk_register(struct device *dev)
220{
221 struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
222 const char *parent_names[PLL_MUX_NUM_PARENT];
223 struct clk_init_data init;
224 struct g12a_ephy_pll *pll;
225 struct clk_mux *mux;
226 struct clk *clk;
227 char *name;
228 int i;
229
230 /* get the mux parents */
231 for (i = 0; i < PLL_MUX_NUM_PARENT; i++) {
232 char in_name[8];
233
234 snprintf(in_name, sizeof(in_name), "clkin%d", i);
235 clk = devm_clk_get(dev, in_name);
236 if (IS_ERR(clk))
237 return dev_err_probe(dev, PTR_ERR(clk),
238 "Missing clock %s\n", in_name);
239
240 parent_names[i] = __clk_get_name(clk);
241 }
242
243 /* create the input mux */
244 mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
245 if (!mux)
246 return -ENOMEM;
247
248 name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
249 if (!name)
250 return -ENOMEM;
251
252 init.name = name;
253 init.ops = &clk_mux_ro_ops;
254 init.flags = 0;
255 init.parent_names = parent_names;
256 init.num_parents = PLL_MUX_NUM_PARENT;
257
258 mux->reg = priv->regs + ETH_PLL_CTL0;
259 mux->shift = __ffs(PLL_CTL0_SEL);
260 mux->mask = PLL_CTL0_SEL >> mux->shift;
261 mux->hw.init = &init;
262
263 clk = devm_clk_register(dev, &mux->hw);
264 kfree(name);
265 if (IS_ERR(clk)) {
266 dev_err(dev, "failed to register input mux\n");
267 return PTR_ERR(clk);
268 }
269
270 /* create the pll */
271 pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
272 if (!pll)
273 return -ENOMEM;
274
275 name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev));
276 if (!name)
277 return -ENOMEM;
278
279 init.name = name;
280 init.ops = &g12a_ephy_pll_ops;
281 init.flags = 0;
282 parent_names[0] = __clk_get_name(clk);
283 init.parent_names = parent_names;
284 init.num_parents = 1;
285
286 pll->base = priv->regs;
287 pll->hw.init = &init;
288
289 clk = devm_clk_register(dev, &pll->hw);
290 kfree(name);
291 if (IS_ERR(clk)) {
292 dev_err(dev, "failed to register input mux\n");
293 return PTR_ERR(clk);
294 }
295
296 priv->pll = clk;
297
298 return 0;
299}
300
301static int g12a_mdio_mux_probe(struct platform_device *pdev)
302{
303 struct device *dev = &pdev->dev;
304 struct g12a_mdio_mux *priv;
305 int ret;
306
307 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
308 if (!priv)
309 return -ENOMEM;
310
311 platform_set_drvdata(pdev, priv);
312
313 priv->regs = devm_platform_ioremap_resource(pdev, 0);
314 if (IS_ERR(priv->regs))
315 return PTR_ERR(priv->regs);
316
317 priv->pclk = devm_clk_get(dev, "pclk");
318 if (IS_ERR(priv->pclk))
319 return dev_err_probe(dev, PTR_ERR(priv->pclk),
320 "failed to get peripheral clock\n");
321
322 /* Make sure the device registers are clocked */
323 ret = clk_prepare_enable(priv->pclk);
324 if (ret) {
325 dev_err(dev, "failed to enable peripheral clock");
326 return ret;
327 }
328
329 /* Register PLL in CCF */
330 ret = g12a_ephy_glue_clk_register(dev);
331 if (ret)
332 goto err;
333
334 ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
335 &priv->mux_handle, dev, NULL);
336 if (ret) {
337 dev_err_probe(dev, ret, "mdio multiplexer init failed\n");
338 goto err;
339 }
340
341 return 0;
342
343err:
344 clk_disable_unprepare(priv->pclk);
345 return ret;
346}
347
348static int g12a_mdio_mux_remove(struct platform_device *pdev)
349{
350 struct g12a_mdio_mux *priv = platform_get_drvdata(pdev);
351
352 mdio_mux_uninit(priv->mux_handle);
353
354 if (priv->pll_is_enabled)
355 clk_disable_unprepare(priv->pll);
356
357 clk_disable_unprepare(priv->pclk);
358
359 return 0;
360}
361
362static struct platform_driver g12a_mdio_mux_driver = {
363 .probe = g12a_mdio_mux_probe,
364 .remove = g12a_mdio_mux_remove,
365 .driver = {
366 .name = "g12a-mdio_mux",
367 .of_match_table = g12a_mdio_mux_match,
368 },
369};
370module_platform_driver(g12a_mdio_mux_driver);
371
372MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver");
373MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
374MODULE_LICENSE("GPL v2");