tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2
3#
4# Light sensors
5#
6# When adding new entries keep the list in alphabetical order
7
8menu "Light sensors"
9
10config ACPI_ALS
11 tristate "ACPI Ambient Light Sensor"
12 depends on ACPI
13 select IIO_BUFFER
14 select IIO_TRIGGERED_BUFFER
15 select IIO_KFIFO_BUF
16 help
17 Say Y here if you want to build a driver for the ACPI0008
18 Ambient Light Sensor.
19
20 To compile this driver as a module, choose M here: the module will
21 be called acpi-als.
22
23config ADJD_S311
24 tristate "ADJD-S311-CR999 digital color sensor"
25 select IIO_BUFFER
26 select IIO_TRIGGERED_BUFFER
27 depends on I2C
28 help
29 If you say yes here you get support for the Avago ADJD-S311-CR999
30 digital color light sensor.
31
32 This driver can also be built as a module. If so, the module
33 will be called adjd_s311.
34
35config ADUX1020
36 tristate "ADUX1020 photometric sensor"
37 select REGMAP_I2C
38 depends on I2C
39 help
40 Say Y here if you want to build a driver for the Analog Devices
41 ADUX1020 photometric sensor.
42
43 To compile this driver as a module, choose M here: the
44 module will be called adux1020.
45
46config AL3010
47 tristate "AL3010 ambient light sensor"
48 depends on I2C
49 help
50 Say Y here if you want to build a driver for the Dyna Image AL3010
51 ambient light sensor.
52
53 To compile this driver as a module, choose M here: the
54 module will be called al3010.
55
56config AL3320A
57 tristate "AL3320A ambient light sensor"
58 depends on I2C
59 help
60 Say Y here if you want to build a driver for the Dyna Image AL3320A
61 ambient light sensor.
62
63 To compile this driver as a module, choose M here: the
64 module will be called al3320a.
65
66config APDS9300
67 tristate "APDS9300 ambient light sensor"
68 depends on I2C
69 help
70 Say Y here if you want to build a driver for the Avago APDS9300
71 ambient light sensor.
72
73 To compile this driver as a module, choose M here: the
74 module will be called apds9300.
75
76config APDS9960
77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
78 select REGMAP_I2C
79 select IIO_BUFFER
80 select IIO_KFIFO_BUF
81 depends on I2C
82 help
83 Say Y here to build I2C interface support for the Avago
84 APDS9960 gesture/RGB/ALS/proximity sensor.
85
86 To compile this driver as a module, choose M here: the
87 module will be called apds9960
88
89config AS73211
90 tristate "AMS AS73211 XYZ color sensor"
91 depends on I2C
92 select IIO_BUFFER
93 select IIO_TRIGGERED_BUFFER
94 help
95 If you say yes here you get support for the AMS AS73211
96 JENCOLOR(R) Digital XYZ Sensor.
97
98 For triggered measurements, you will need an additional trigger driver
99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
100
101 This driver can also be built as a module. If so, the module
102 will be called as73211.
103
104config BH1750
105 tristate "ROHM BH1750 ambient light sensor"
106 depends on I2C
107 help
108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
109 BH1750, BH1751 ambient light sensors.
110
111 To compile this driver as a module, choose M here: the module will
112 be called bh1750.
113
114config BH1780
115 tristate "ROHM BH1780 ambient light sensor"
116 depends on I2C
117 help
118 Say Y here to build support for the ROHM BH1780GLI ambient
119 light sensor.
120
121 To compile this driver as a module, choose M here: the module will
122 be called bh1780.
123
124config CM32181
125 depends on I2C
126 tristate "CM32181 driver"
127 help
128 Say Y here if you use cm32181.
129 This option enables ambient light sensor using
130 Capella cm32181 device driver.
131
132 To compile this driver as a module, choose M here:
133 the module will be called cm32181.
134
135config CM3232
136 depends on I2C
137 tristate "CM3232 ambient light sensor"
138 help
139 Say Y here if you use cm3232.
140 This option enables ambient light sensor using
141 Capella Microsystems cm3232 device driver.
142
143 To compile this driver as a module, choose M here:
144 the module will be called cm3232.
145
146config CM3323
147 depends on I2C
148 tristate "Capella CM3323 color light sensor"
149 help
150 Say Y here if you want to build a driver for Capella CM3323
151 color sensor.
152
153 To compile this driver as a module, choose M here: the module will
154 be called cm3323.
155
156config CM3605
157 tristate "Capella CM3605 ambient light and proximity sensor"
158 help
159 Say Y here if you want to build a driver for Capella CM3605
160 ambient light and short range proximity sensor.
161
162 To compile this driver as a module, choose M here: the module will
163 be called cm3605.
164
165config CM36651
166 depends on I2C
167 tristate "CM36651 driver"
168 help
169 Say Y here if you use cm36651.
170 This option enables proximity & RGB sensor using
171 Capella cm36651 device driver.
172
173 To compile this driver as a module, choose M here:
174 the module will be called cm36651.
175
176config IIO_CROS_EC_LIGHT_PROX
177 tristate "ChromeOS EC Light and Proximity Sensors"
178 depends on IIO_CROS_EC_SENSORS_CORE
179 help
180 Say Y here if you use the light and proximity sensors
181 presented by the ChromeOS EC Sensor hub.
182
183 To compile this driver as a module, choose M here:
184 the module will be called cros_ec_light_prox.
185
186config GP2AP002
187 tristate "Sharp GP2AP002 Proximity/ALS sensor"
188 depends on I2C
189 select REGMAP
190 help
191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip
192 hooked to an I2C bus.
193
194 To compile this driver as a module, choose M here: the
195 module will be called gp2ap002.
196
197config GP2AP020A00F
198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
199 depends on I2C
200 select REGMAP_I2C
201 select IIO_BUFFER
202 select IIO_TRIGGERED_BUFFER
203 select IRQ_WORK
204 help
205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
206 hooked to an I2C bus.
207
208 To compile this driver as a module, choose M here: the
209 module will be called gp2ap020a00f.
210
211config IQS621_ALS
212 tristate "Azoteq IQS621/622 ambient light sensors"
213 depends on MFD_IQS62X || COMPILE_TEST
214 help
215 Say Y here if you want to build support for the Azoteq IQS621
216 and IQS622 ambient light sensors.
217
218 To compile this driver as a module, choose M here: the module
219 will be called iqs621-als.
220
221config SENSORS_ISL29018
222 tristate "Intersil 29018 light and proximity sensor"
223 depends on I2C
224 select REGMAP_I2C
225 default n
226 help
227 If you say yes here you get support for ambient light sensing and
228 proximity infrared sensing from Intersil ISL29018.
229 This driver will provide the measurements of ambient light intensity
230 in lux, proximity infrared sensing and normal infrared sensing.
231 Data from sensor is accessible via sysfs.
232
233config SENSORS_ISL29028
234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
235 depends on I2C
236 select REGMAP_I2C
237 help
238 Provides driver for the Intersil's ISL29028 device.
239 This driver supports the sysfs interface to get the ALS, IR intensity,
240 Proximity value via iio. The ISL29028 provides the concurrent sensing
241 of ambient light and proximity.
242
243config ISL29125
244 tristate "Intersil ISL29125 digital color light sensor"
245 depends on I2C
246 select IIO_BUFFER
247 select IIO_TRIGGERED_BUFFER
248 help
249 Say Y here if you want to build a driver for the Intersil ISL29125
250 RGB light sensor for I2C.
251
252 To compile this driver as a module, choose M here: the module will be
253 called isl29125.
254
255config HID_SENSOR_ALS
256 depends on HID_SENSOR_HUB
257 select IIO_BUFFER
258 select HID_SENSOR_IIO_COMMON
259 select HID_SENSOR_IIO_TRIGGER
260 tristate "HID ALS"
261 help
262 Say yes here to build support for the HID SENSOR
263 Ambient light sensor.
264
265 To compile this driver as a module, choose M here: the
266 module will be called hid-sensor-als.
267
268config HID_SENSOR_PROX
269 depends on HID_SENSOR_HUB
270 select IIO_BUFFER
271 select HID_SENSOR_IIO_COMMON
272 select HID_SENSOR_IIO_TRIGGER
273 tristate "HID PROX"
274 help
275 Say yes here to build support for the HID SENSOR
276 Proximity sensor.
277
278 To compile this driver as a module, choose M here: the
279 module will be called hid-sensor-prox.
280
281config JSA1212
282 tristate "JSA1212 ALS and proximity sensor driver"
283 depends on I2C
284 select REGMAP_I2C
285 help
286 Say Y here if you want to build a IIO driver for JSA1212
287 proximity & ALS sensor device.
288
289 To compile this driver as a module, choose M here:
290 the module will be called jsa1212.
291
292config RPR0521
293 tristate "ROHM RPR0521 ALS and proximity sensor driver"
294 depends on I2C
295 select REGMAP_I2C
296 help
297 Say Y here if you want to build support for ROHM's RPR0521
298 ambient light and proximity sensor device.
299
300 To compile this driver as a module, choose M here:
301 the module will be called rpr0521.
302
303config SENSORS_LM3533
304 tristate "LM3533 ambient light sensor"
305 depends on MFD_LM3533
306 help
307 If you say yes here you get support for the ambient light sensor
308 interface on National Semiconductor / TI LM3533 Lighting Power
309 chips.
310
311 The sensor interface can be used to control the LEDs and backlights
312 of the chip through defining five light zones and three sets of
313 corresponding output-current values.
314
315 The driver provides raw and mean adc readings along with the current
316 light zone through sysfs. A threshold event can be generated on zone
317 changes. The ALS-control output values can be set per zone for the
318 three current output channels.
319
320config LTR501
321 tristate "LTR-501ALS-01 light sensor"
322 depends on I2C
323 select REGMAP_I2C
324 select IIO_BUFFER
325 select IIO_TRIGGERED_BUFFER
326 help
327 If you say yes here you get support for the Lite-On LTR-501ALS-01
328 ambient light and proximity sensor. This driver also supports LTR-559
329 ALS/PS or LTR-301 ALS sensors.
330
331 This driver can also be built as a module. If so, the module
332 will be called ltr501.
333
334config LV0104CS
335 tristate "LV0104CS Ambient Light Sensor"
336 depends on I2C
337 help
338 Say Y here if you want to build support for the On Semiconductor
339 LV0104CS ambient light sensor.
340
341 To compile this driver as a module, choose M here:
342 the module will be called lv0104cs.
343
344config MAX44000
345 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
346 depends on I2C
347 select REGMAP_I2C
348 select IIO_BUFFER
349 select IIO_TRIGGERED_BUFFER
350 help
351 Say Y here if you want to build support for Maxim Integrated's
352 MAX44000 ambient and infrared proximity sensor device.
353
354 To compile this driver as a module, choose M here:
355 the module will be called max44000.
356
357config MAX44009
358 tristate "MAX44009 Ambient Light Sensor"
359 depends on I2C
360 select REGMAP_I2C
361 help
362 Say Y here if you want to build support for Maxim Integrated's
363 MAX44009 ambient light sensor device.
364
365 To compile this driver as a module, choose M here:
366 the module will be called max44009.
367
368config NOA1305
369 tristate "ON Semiconductor NOA1305 ambient light sensor"
370 depends on I2C
371 select REGMAP_I2C
372 help
373 Say Y here if you want to build support for the ON Semiconductor
374 NOA1305 ambient light sensor.
375
376 To compile this driver as a module, choose M here:
377 The module will be called noa1305.
378
379config OPT3001
380 tristate "Texas Instruments OPT3001 Light Sensor"
381 depends on I2C
382 help
383 If you say Y or M here, you get support for Texas Instruments
384 OPT3001 Ambient Light Sensor.
385
386 If built as a dynamically linked module, it will be called
387 opt3001.
388
389config PA12203001
390 tristate "TXC PA12203001 light and proximity sensor"
391 depends on I2C
392 select REGMAP_I2C
393 help
394 If you say yes here you get support for the TXC PA12203001
395 ambient light and proximity sensor.
396
397 This driver can also be built as a module. If so, the module
398 will be called pa12203001.
399
400config SI1133
401 tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
402 depends on I2C
403 select REGMAP_I2C
404 help
405 Say Y here if you want to build a driver for the Silicon Labs SI1133
406 UV Index Sensor and Ambient Light Sensor chip.
407
408 To compile this driver as a module, choose M here: the module will be
409 called si1133.
410
411config SI1145
412 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
413 depends on I2C
414 select IIO_BUFFER
415 select IIO_TRIGGERED_BUFFER
416 help
417 Say Y here if you want to build a driver for the Silicon Labs SI1132 or
418 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
419 chips.
420
421 To compile this driver as a module, choose M here: the module will be
422 called si1145.
423
424config STK3310
425 tristate "STK3310 ALS and proximity sensor"
426 depends on I2C
427 select REGMAP_I2C
428 help
429 Say yes here to get support for the Sensortek STK3310 ambient light
430 and proximity sensor. The STK3311 model is also supported by this
431 driver.
432
433 Choosing M will build the driver as a module. If so, the module
434 will be called stk3310.
435
436config ST_UVIS25
437 tristate "STMicroelectronics UVIS25 sensor driver"
438 depends on (I2C || SPI)
439 select IIO_BUFFER
440 select IIO_TRIGGERED_BUFFER
441 select ST_UVIS25_I2C if (I2C)
442 select ST_UVIS25_SPI if (SPI_MASTER)
443 help
444 Say yes here to build support for STMicroelectronics UVIS25
445 uv sensor
446
447 To compile this driver as a module, choose M here: the module
448 will be called st_uvis25.
449
450config ST_UVIS25_I2C
451 tristate
452 depends on ST_UVIS25
453 select REGMAP_I2C
454
455config ST_UVIS25_SPI
456 tristate
457 depends on ST_UVIS25
458 select REGMAP_SPI
459
460config TCS3414
461 tristate "TAOS TCS3414 digital color sensor"
462 depends on I2C
463 select IIO_BUFFER
464 select IIO_TRIGGERED_BUFFER
465 help
466 If you say yes here you get support for the TAOS TCS3414
467 family of digital color sensors.
468
469 This driver can also be built as a module. If so, the module
470 will be called tcs3414.
471
472config TCS3472
473 tristate "TAOS TCS3472 color light-to-digital converter"
474 depends on I2C
475 select IIO_BUFFER
476 select IIO_TRIGGERED_BUFFER
477 help
478 If you say yes here you get support for the TAOS TCS3472
479 family of color light-to-digital converters with IR filter.
480
481 This driver can also be built as a module. If so, the module
482 will be called tcs3472.
483
484config SENSORS_TSL2563
485 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
486 depends on I2C
487 help
488 If you say yes here you get support for the Taos TSL2560,
489 TSL2561, TSL2562 and TSL2563 ambient light sensors.
490
491 This driver can also be built as a module. If so, the module
492 will be called tsl2563.
493
494config TSL2583
495 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
496 depends on I2C
497 help
498 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
499 Access ALS data via iio, sysfs.
500
501config TSL2591
502 tristate "TAOS TSL2591 ambient light sensor"
503 depends on I2C
504 help
505 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
506 featuring channels for combined visible + IR intensity and lux illuminance.
507 Access data via iio and sysfs. Supports iio_events.
508
509 To compile this driver as a module, select M: the
510 module will be called tsl2591.
511
512config TSL2772
513 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
514 depends on I2C
515 help
516 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
517 tmd2672, tsl2772, tmd2772 devices.
518 Provides iio_events and direct access via sysfs.
519
520config TSL4531
521 tristate "TAOS TSL4531 ambient light sensors"
522 depends on I2C
523 help
524 Say Y here if you want to build a driver for the TAOS TSL4531 family
525 of ambient light sensors with direct lux output.
526
527 To compile this driver as a module, choose M here: the
528 module will be called tsl4531.
529
530config US5182D
531 tristate "UPISEMI light and proximity sensor"
532 depends on I2C
533 help
534 If you say yes here you get support for the UPISEMI US5182D
535 ambient light and proximity sensor.
536
537 This driver can also be built as a module. If so, the module
538 will be called us5182d.
539
540config VCNL4000
541 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
542 select IIO_BUFFER
543 select IIO_TRIGGERED_BUFFER
544 depends on I2C
545 help
546 Say Y here if you want to build a driver for the Vishay VCNL4000,
547 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
548 sensor.
549
550 To compile this driver as a module, choose M here: the
551 module will be called vcnl4000.
552
553config VCNL4035
554 tristate "VCNL4035 combined ALS and proximity sensor"
555 select IIO_BUFFER
556 select IIO_TRIGGERED_BUFFER
557 select REGMAP_I2C
558 depends on I2C
559 help
560 Say Y here if you want to build a driver for the Vishay VCNL4035,
561 combined ambient light (ALS) and proximity sensor. Currently only ALS
562 function is available.
563
564 To compile this driver as a module, choose M here: the
565 module will be called vcnl4035.
566
567config VEML6030
568 tristate "VEML6030 ambient light sensor"
569 select REGMAP_I2C
570 depends on I2C
571 help
572 Say Y here if you want to build a driver for the Vishay VEML6030
573 ambient light sensor (ALS).
574
575 To compile this driver as a module, choose M here: the
576 module will be called veml6030.
577
578config VEML6070
579 tristate "VEML6070 UV A light sensor"
580 depends on I2C
581 help
582 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
583 light sensor.
584
585 To compile this driver as a module, choose M here: the
586 module will be called veml6070.
587
588config VL6180
589 tristate "VL6180 ALS, range and proximity sensor"
590 depends on I2C
591 help
592 Say Y here if you want to build a driver for the STMicroelectronics
593 VL6180 combined ambient light, range and proximity sensor.
594
595 To compile this driver as a module, choose M here: the
596 module will be called vl6180.
597
598config ZOPT2201
599 tristate "ZOPT2201 ALS and UV B sensor"
600 depends on I2C
601 help
602 Say Y here if you want to build a driver for the IDT
603 ZOPT2201 ambient light and UV B sensor.
604
605 To compile this driver as a module, choose M here: the
606 module will be called zopt2201.
607
608endmenu