tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# Test VxLAN flooding. The device stores flood records in a singly linked list
5# where each record stores up to three IPv4 addresses of remote VTEPs. The test
6# verifies that packets are correctly flooded in various cases such as deletion
7# of a record in the middle of the list.
8#
9# +--------------------+
10# | H1 (vrf) |
11# | + $h1 |
12# | | 203.0.113.1/24|
13# +----|---------------+
14# |
15# +----|----------------------------------------------------------------------+
16# | SW | |
17# | +--|--------------------------------------------------------------------+ |
18# | | + $swp1 BR0 (802.1d) | |
19# | | | |
20# | | + vxlan0 (vxlan) | |
21# | | local 198.51.100.1 | |
22# | | remote 198.51.100.{2..13} | |
23# | | id 10 dstport 4789 | |
24# | +-----------------------------------------------------------------------+ |
25# | |
26# | 198.51.100.0/24 via 192.0.2.2 |
27# | |
28# | + $rp1 |
29# | | 192.0.2.1/24 |
30# +----|----------------------------------------------------------------------+
31# |
32# +----|--------------------------------------------------------+
33# | | R2 (vrf) |
34# | + $rp2 |
35# | 192.0.2.2/24 |
36# | |
37# +-------------------------------------------------------------+
38
39lib_dir=$(dirname $0)/../../../net/forwarding
40
41ALL_TESTS="flooding_test"
42NUM_NETIFS=4
43source $lib_dir/tc_common.sh
44source $lib_dir/lib.sh
45
46h1_create()
47{
48 simple_if_init $h1 203.0.113.1/24
49}
50
51h1_destroy()
52{
53 simple_if_fini $h1 203.0.113.1/24
54}
55
56switch_create()
57{
58 # Make sure the bridge uses the MAC address of the local port and
59 # not that of the VxLAN's device
60 ip link add dev br0 type bridge mcast_snooping 0
61 ip link set dev br0 address $(mac_get $swp1)
62
63 ip link add name vxlan0 type vxlan id 10 nolearning noudpcsum \
64 ttl 20 tos inherit local 198.51.100.1 dstport 4789
65
66 ip address add 198.51.100.1/32 dev lo
67
68 ip link set dev $swp1 master br0
69 ip link set dev vxlan0 master br0
70
71 ip link set dev br0 up
72 ip link set dev $swp1 up
73 ip link set dev vxlan0 up
74}
75
76switch_destroy()
77{
78 ip link set dev vxlan0 down
79 ip link set dev $swp1 down
80 ip link set dev br0 down
81
82 ip link set dev vxlan0 nomaster
83 ip link set dev $swp1 nomaster
84
85 ip address del 198.51.100.1/32 dev lo
86
87 ip link del dev vxlan0
88
89 ip link del dev br0
90}
91
92router1_create()
93{
94 # This router is in the default VRF, where the VxLAN device is
95 # performing the L3 lookup
96 ip link set dev $rp1 up
97 ip address add 192.0.2.1/24 dev $rp1
98 ip route add 198.51.100.0/24 via 192.0.2.2
99}
100
101router1_destroy()
102{
103 ip route del 198.51.100.0/24 via 192.0.2.2
104 ip address del 192.0.2.1/24 dev $rp1
105 ip link set dev $rp1 down
106}
107
108router2_create()
109{
110 # This router is not in the default VRF, so use simple_if_init()
111 simple_if_init $rp2 192.0.2.2/24
112}
113
114router2_destroy()
115{
116 simple_if_fini $rp2 192.0.2.2/24
117}
118
119setup_prepare()
120{
121 h1=${NETIFS[p1]}
122 swp1=${NETIFS[p2]}
123
124 rp1=${NETIFS[p3]}
125 rp2=${NETIFS[p4]}
126
127 vrf_prepare
128
129 h1_create
130
131 switch_create
132
133 router1_create
134 router2_create
135
136 forwarding_enable
137}
138
139cleanup()
140{
141 pre_cleanup
142
143 forwarding_restore
144
145 router2_destroy
146 router1_destroy
147
148 switch_destroy
149
150 h1_destroy
151
152 vrf_cleanup
153}
154
155flooding_remotes_add()
156{
157 local num_remotes=$1
158 local lsb
159 local i
160
161 for i in $(eval echo {1..$num_remotes}); do
162 lsb=$((i + 1))
163
164 bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \
165 dst 198.51.100.$lsb
166 done
167}
168
169flooding_filters_add()
170{
171 local num_remotes=$1
172 local lsb
173 local i
174
175 # Prevent unwanted packets from entering the bridge and interfering
176 # with the test.
177 tc qdisc add dev br0 clsact
178 tc filter add dev br0 egress protocol all pref 1 handle 1 \
179 matchall skip_hw action drop
180 tc qdisc add dev $h1 clsact
181 tc filter add dev $h1 egress protocol all pref 1 handle 1 \
182 flower skip_hw dst_mac de:ad:be:ef:13:37 action pass
183 tc filter add dev $h1 egress protocol all pref 2 handle 2 \
184 matchall skip_hw action drop
185
186 tc qdisc add dev $rp2 clsact
187
188 for i in $(eval echo {1..$num_remotes}); do
189 lsb=$((i + 1))
190
191 tc filter add dev $rp2 ingress protocol ip pref $i handle $i \
192 flower ip_proto udp dst_ip 198.51.100.$lsb \
193 dst_port 4789 skip_sw action drop
194 done
195}
196
197flooding_filters_del()
198{
199 local num_remotes=$1
200 local i
201
202 for i in $(eval echo {1..$num_remotes}); do
203 tc filter del dev $rp2 ingress protocol ip pref $i \
204 handle $i flower
205 done
206
207 tc qdisc del dev $rp2 clsact
208
209 tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall
210 tc filter del dev $h1 egress protocol all pref 1 handle 1 flower
211 tc qdisc del dev $h1 clsact
212 tc filter del dev br0 egress protocol all pref 1 handle 1 matchall
213 tc qdisc del dev br0 clsact
214}
215
216flooding_check_packets()
217{
218 local packets=("$@")
219 local num_remotes=${#packets[@]}
220 local i
221
222 for i in $(eval echo {1..$num_remotes}); do
223 tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]}
224 check_err $? "remote $i - did not get expected number of packets"
225 done
226}
227
228flooding_test()
229{
230 # Use 12 remote VTEPs that will be stored in 4 records. The array
231 # 'packets' will store how many packets are expected to be received
232 # by each remote VTEP at each stage of the test
233 declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1)
234 local num_remotes=12
235
236 RET=0
237
238 # Add FDB entries for remote VTEPs and corresponding tc filters on the
239 # ingress of the nexthop router. These filters will count how many
240 # packets were flooded to each remote VTEP
241 flooding_remotes_add $num_remotes
242 flooding_filters_add $num_remotes
243
244 # Send one packet and make sure it is flooded to all the remote VTEPs
245 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
246 flooding_check_packets "${packets[@]}"
247 log_test "flood after 1 packet"
248
249 # Delete the third record which corresponds to VTEPs with LSB 8..10
250 # and check that packet is flooded correctly when we remove a record
251 # from the middle of the list
252 RET=0
253
254 packets=(2 2 2 2 2 2 1 1 1 2 2 2)
255 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.8
256 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.9
257 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.10
258
259 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
260 flooding_check_packets "${packets[@]}"
261 log_test "flood after 2 packets"
262
263 # Delete the first record and make sure the packet is flooded correctly
264 RET=0
265
266 packets=(2 2 2 3 3 3 1 1 1 3 3 3)
267 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.2
268 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.3
269 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.4
270
271 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
272 flooding_check_packets "${packets[@]}"
273 log_test "flood after 3 packets"
274
275 # Delete the last record and make sure the packet is flooded correctly
276 RET=0
277
278 packets=(2 2 2 4 4 4 1 1 1 3 3 3)
279 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.11
280 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.12
281 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.13
282
283 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
284 flooding_check_packets "${packets[@]}"
285 log_test "flood after 4 packets"
286
287 # Delete the last record, one entry at a time and make sure single
288 # entries are correctly removed
289 RET=0
290
291 packets=(2 2 2 4 5 5 1 1 1 3 3 3)
292 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.5
293
294 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
295 flooding_check_packets "${packets[@]}"
296 log_test "flood after 5 packets"
297
298 RET=0
299
300 packets=(2 2 2 4 5 6 1 1 1 3 3 3)
301 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.6
302
303 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
304 flooding_check_packets "${packets[@]}"
305 log_test "flood after 6 packets"
306
307 RET=0
308
309 packets=(2 2 2 4 5 6 1 1 1 3 3 3)
310 bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.7
311
312 $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
313 flooding_check_packets "${packets[@]}"
314 log_test "flood after 7 packets"
315
316 flooding_filters_del $num_remotes
317}
318
319trap cleanup EXIT
320
321setup_prepare
322setup_wait
323
324tests_run
325
326exit $EXIT_STATUS