tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2
3menuconfig RC_CORE
4 tristate "Remote Controller support"
5 depends on INPUT
6 help
7 Enable support for Remote Controllers on Linux. This is
8 needed in order to support several video capture adapters,
9 standalone IR receivers/transmitters, and RF receivers.
10
11 Enable this option if you have a video capture board even
12 if you don't need IR, as otherwise, you may not be able to
13 compile the driver for your adapter.
14
15 Say Y when you have a TV or an IR device.
16
17if RC_CORE
18
19config BPF_LIRC_MODE2
20 bool "Support for eBPF programs attached to lirc devices"
21 depends on BPF_SYSCALL
22 depends on RC_CORE=y
23 depends on LIRC
24 help
25 Allow attaching eBPF programs to a lirc device using the bpf(2)
26 syscall command BPF_PROG_ATTACH. This is supported for raw IR
27 receivers.
28
29 These eBPF programs can be used to decode IR into scancodes, for
30 IR protocols not supported by the kernel decoders.
31
32config LIRC
33 bool "LIRC user interface"
34 help
35 Enable this option to enable the Linux Infrared Remote
36 Control user interface (e.g. /dev/lirc*). This interface
37 passes raw IR to and from userspace, which is needed for
38 IR transmitting (aka "blasting") and for the lirc daemon.
39
40source "drivers/media/rc/keymaps/Kconfig"
41
42menuconfig RC_DECODERS
43 bool "Remote controller decoders"
44
45if RC_DECODERS
46
47config IR_IMON_DECODER
48 tristate "Enable IR raw decoder for the iMON protocol"
49 help
50 Enable this option if you have iMON PAD or Antec Veris infrared
51 remote control and you would like to use it with a raw IR
52 receiver, or if you wish to use an encoder to transmit this IR.
53
54config IR_JVC_DECODER
55 tristate "Enable IR raw decoder for the JVC protocol"
56 select BITREVERSE
57
58 help
59 Enable this option if you have an infrared remote control which
60 uses the JVC protocol, and you need software decoding support.
61
62config IR_MCE_KBD_DECODER
63 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
64 select BITREVERSE
65
66 help
67 Enable this option if you have a Microsoft Remote Keyboard for
68 Windows Media Center Edition, which you would like to use with
69 a raw IR receiver in your system.
70
71config IR_NEC_DECODER
72 tristate "Enable IR raw decoder for the NEC protocol"
73 select BITREVERSE
74
75 help
76 Enable this option if you have IR with NEC protocol, and
77 if the IR is decoded in software
78
79config IR_RC5_DECODER
80 tristate "Enable IR raw decoder for the RC-5 protocol"
81 select BITREVERSE
82
83 help
84 Enable this option if you have IR with RC-5 protocol, and
85 if the IR is decoded in software
86
87config IR_RC6_DECODER
88 tristate "Enable IR raw decoder for the RC6 protocol"
89 select BITREVERSE
90
91 help
92 Enable this option if you have an infrared remote control which
93 uses the RC6 protocol, and you need software decoding support.
94
95config IR_RCMM_DECODER
96 tristate "Enable IR raw decoder for the RC-MM protocol"
97 help
98 Enable this option when you have IR with RC-MM protocol, and
99 you need the software decoder. The driver supports 12,
100 24 and 32 bits RC-MM variants. You can enable or disable the
101 different modes using the following RC protocol keywords:
102 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
103
104 To compile this driver as a module, choose M here: the module
105 will be called ir-rcmm-decoder.
106
107config IR_SANYO_DECODER
108 tristate "Enable IR raw decoder for the Sanyo protocol"
109 select BITREVERSE
110
111 help
112 Enable this option if you have an infrared remote control which
113 uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
114 and you need software decoding support.
115
116config IR_SHARP_DECODER
117 tristate "Enable IR raw decoder for the Sharp protocol"
118 select BITREVERSE
119
120 help
121 Enable this option if you have an infrared remote control which
122 uses the Sharp protocol (Sharp, Denon), and you need software
123 decoding support.
124
125config IR_SONY_DECODER
126 tristate "Enable IR raw decoder for the Sony protocol"
127 select BITREVERSE
128
129 help
130 Enable this option if you have an infrared remote control which
131 uses the Sony protocol, and you need software decoding support.
132
133config IR_XMP_DECODER
134 tristate "Enable IR raw decoder for the XMP protocol"
135 select BITREVERSE
136
137 help
138 Enable this option if you have IR with XMP protocol, and
139 if the IR is decoded in software
140
141endif #RC_DECODERS
142
143menuconfig RC_DEVICES
144 bool "Remote Controller devices"
145
146if RC_DEVICES
147
148config IR_ENE
149 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
150 depends on PNP || COMPILE_TEST
151 help
152 Say Y here to enable support for integrated infrared receiver
153 /transceiver made by ENE.
154
155 You can see if you have it by looking at lspnp output.
156 Output should include ENE0100 ENE0200 or something similar.
157
158 To compile this driver as a module, choose M here: the
159 module will be called ene_ir.
160
161config IR_FINTEK
162 tristate "Fintek Consumer Infrared Transceiver"
163 depends on PNP || COMPILE_TEST
164 help
165 Say Y here to enable support for integrated infrared receiver
166 /transceiver made by Fintek. This chip is found on assorted
167 Jetway motherboards (and of course, possibly others).
168
169 To compile this driver as a module, choose M here: the
170 module will be called fintek-cir.
171
172config IR_GPIO_CIR
173 tristate "GPIO IR remote control"
174 depends on (OF && GPIOLIB) || COMPILE_TEST
175 help
176 Say Y if you want to use GPIO based IR Receiver.
177
178 To compile this driver as a module, choose M here: the module will
179 be called gpio-ir-recv.
180
181config IR_GPIO_TX
182 tristate "GPIO IR Bit Banging Transmitter"
183 depends on LIRC
184 depends on (OF && GPIOLIB) || COMPILE_TEST
185 help
186 Say Y if you want to a GPIO based IR transmitter. This is a
187 bit banging driver.
188
189 To compile this driver as a module, choose M here: the module will
190 be called gpio-ir-tx.
191
192config IR_HIX5HD2
193 tristate "Hisilicon hix5hd2 IR remote control"
194 depends on (OF && HAS_IOMEM) || COMPILE_TEST
195 help
196 Say Y here if you want to use hisilicon hix5hd2 remote control.
197 To compile this driver as a module, choose M here: the module will be
198 called ir-hix5hd2.
199
200 If you're not sure, select N here
201
202config IR_IGORPLUGUSB
203 tristate "IgorPlug-USB IR Receiver"
204 depends on USB
205 help
206 Say Y here if you want to use the IgorPlug-USB IR Receiver by
207 Igor Cesko. This device is included on the Fit-PC2.
208
209 Note that this device can only record bursts of 36 IR pulses and
210 spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
211
212 To compile this driver as a module, choose M here: the module will
213 be called igorplugusb.
214
215config IR_IGUANA
216 tristate "IguanaWorks USB IR Transceiver"
217 depends on USB
218 help
219 Say Y here if you want to use the IguanaWorks USB IR Transceiver.
220 Both infrared receive and send are supported. If you want to
221 change the ID or the pin config, use the user space driver from
222 IguanaWorks.
223
224 Only firmware 0x0205 and later is supported.
225
226 To compile this driver as a module, choose M here: the module will
227 be called iguanair.
228
229config IR_IMON
230 tristate "SoundGraph iMON Receiver and Display"
231 depends on USB
232 help
233 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
234 IR Receiver and/or LCD/VFD/VGA display.
235
236 To compile this driver as a module, choose M here: the
237 module will be called imon.
238
239config IR_IMON_RAW
240 tristate "SoundGraph iMON Receiver (early raw IR models)"
241 depends on USB
242 help
243 Say Y here if you want to use a SoundGraph iMON IR Receiver,
244 early raw models.
245
246 To compile this driver as a module, choose M here: the
247 module will be called imon_raw.
248
249config IR_ITE_CIR
250 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
251 depends on PNP || COMPILE_TEST
252 help
253 Say Y here to enable support for integrated infrared receivers
254 /transceivers made by ITE Tech Inc. These are found in
255 several ASUS devices, like the ASUS Digimatrix or the ASUS
256 EEEBox 1501U.
257
258 To compile this driver as a module, choose M here: the
259 module will be called ite-cir.
260
261config IR_MCEUSB
262 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
263 depends on USB
264 help
265 Say Y here if you want to use a Windows Media Center Edition
266 eHome Infrared Transceiver.
267
268 To compile this driver as a module, choose M here: the
269 module will be called mceusb.
270
271config IR_MESON
272 tristate "Amlogic Meson IR remote receiver"
273 depends on ARCH_MESON || COMPILE_TEST
274 help
275 Say Y if you want to use the IR remote receiver available
276 on Amlogic Meson SoCs.
277
278 To compile this driver as a module, choose M here: the
279 module will be called meson-ir.
280
281config IR_MESON_TX
282 tristate "Amlogic Meson IR TX"
283 depends on ARCH_MESON || COMPILE_TEST
284 help
285 Say Y if you want to use the IR transmitter available on
286 Amlogic Meson SoCs.
287
288 To compile this driver as a module, choose M here: the
289 module will be called meson-ir-tx.
290
291config IR_MTK
292 tristate "Mediatek IR remote receiver"
293 depends on ARCH_MEDIATEK || COMPILE_TEST
294 help
295 Say Y if you want to use the IR remote receiver available
296 on Mediatek SoCs.
297
298 To compile this driver as a module, choose M here: the
299 module will be called mtk-cir.
300
301config IR_NUVOTON
302 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
303 depends on PNP || COMPILE_TEST
304 help
305 Say Y here to enable support for integrated infrared receiver
306 /transceiver made by Nuvoton (formerly Winbond). This chip is
307 found in the ASRock ION 330HT, as well as assorted Intel
308 DP55-series motherboards (and of course, possibly others).
309
310 To compile this driver as a module, choose M here: the
311 module will be called nuvoton-cir.
312
313config IR_PWM_TX
314 tristate "PWM IR transmitter"
315 depends on LIRC
316 depends on PWM
317 depends on OF || COMPILE_TEST
318 help
319 Say Y if you want to use a PWM based IR transmitter. This is
320 more power efficient than the bit banging gpio driver.
321
322 To compile this driver as a module, choose M here: the module will
323 be called pwm-ir-tx.
324
325config IR_REDRAT3
326 tristate "RedRat3 IR Transceiver"
327 depends on USB
328 select NEW_LEDS
329 select LEDS_CLASS
330 help
331 Say Y here if you want to use a RedRat3 Infrared Transceiver.
332
333 To compile this driver as a module, choose M here: the
334 module will be called redrat3.
335
336config IR_RX51
337 tristate "Nokia N900 IR transmitter diode"
338 depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
339 help
340 Say Y or M here if you want to enable support for the IR
341 transmitter diode built in the Nokia N900 (RX51) device.
342
343 The driver uses omap DM timers for generating the carrier
344 wave and pulses.
345
346config IR_SERIAL
347 tristate "Homebrew Serial Port Receiver"
348 help
349 Say Y if you want to use Homebrew Serial Port Receivers and
350 Transceivers.
351
352 To compile this driver as a module, choose M here: the module will
353 be called serial-ir.
354
355config IR_SERIAL_TRANSMITTER
356 bool "Serial Port Transmitter"
357 depends on IR_SERIAL
358 help
359 Serial Port Transmitter support
360
361config IR_SPI
362 tristate "SPI connected IR LED"
363 depends on SPI && LIRC
364 depends on OF || COMPILE_TEST
365 help
366 Say Y if you want to use an IR LED connected through SPI bus.
367
368 To compile this driver as a module, choose M here: the module will be
369 called ir-spi.
370
371config IR_STREAMZAP
372 tristate "Streamzap PC Remote IR Receiver"
373 depends on USB
374 help
375 Say Y here if you want to use a Streamzap PC Remote
376 Infrared Receiver.
377
378 To compile this driver as a module, choose M here: the
379 module will be called streamzap.
380
381config IR_SUNXI
382 tristate "SUNXI IR remote control"
383 depends on ARCH_SUNXI || COMPILE_TEST
384 help
385 Say Y if you want to use sunXi internal IR Controller
386
387 To compile this driver as a module, choose M here: the module will
388 be called sunxi-ir.
389
390config IR_TOY
391 tristate "Infrared Toy and IR Droid"
392 depends on USB
393 help
394 Say Y here if you want to use the Infrared Toy or IR Droid, USB
395 versions.
396
397 To compile this driver as a module, choose M here: the module will be
398 called ir_toy.
399
400config IR_TTUSBIR
401 tristate "TechnoTrend USB IR Receiver"
402 depends on USB
403 select NEW_LEDS
404 select LEDS_CLASS
405 help
406 Say Y here if you want to use the TechnoTrend USB IR Receiver. The
407 driver can control the led.
408
409 To compile this driver as a module, choose M here: the module will
410 be called ttusbir.
411
412config IR_WINBOND_CIR
413 tristate "Winbond IR remote control"
414 depends on (X86 && PNP) || COMPILE_TEST
415 select NEW_LEDS
416 select LEDS_CLASS
417 select BITREVERSE
418 help
419 Say Y here if you want to use the IR remote functionality found
420 in some Winbond SuperI/O chips. Currently only the WPCD376I
421 chip is supported (included in some Intel Media series
422 motherboards).
423
424 To compile this driver as a module, choose M here: the module will
425 be called winbond_cir.
426
427config RC_ATI_REMOTE
428 tristate "ATI / X10 based USB RF remote controls"
429 depends on USB
430 help
431 Say Y here if you want to use an X10 based USB remote control.
432 These are RF remotes with USB receivers.
433
434 Such devices include the ATI remote that comes with many of ATI's
435 All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
436 Medion RF remote, and SnapStream FireFly remote.
437
438 This driver provides mouse pointer, left and right mouse buttons,
439 and maps all the other remote buttons to keypress events.
440
441 To compile this driver as a module, choose M here: the module will be
442 called ati_remote.
443
444config RC_LOOPBACK
445 tristate "Remote Control Loopback Driver"
446 help
447 Say Y here if you want support for the remote control loopback
448 driver which allows TX data to be sent back as RX data.
449 This is mostly useful for debugging purposes.
450
451 If you're not sure, select N here.
452
453 To compile this driver as a module, choose M here: the module will
454 be called rc_loopback.
455
456config RC_ST
457 tristate "ST remote control receiver"
458 depends on ARCH_STI || COMPILE_TEST
459 help
460 Say Y here if you want support for ST remote control driver
461 which allows both IR and UHF RX.
462 The driver passes raw pulse and space information to the LIRC decoder.
463
464 If you're not sure, select N here.
465
466config RC_XBOX_DVD
467 tristate "Xbox DVD Movie Playback Kit"
468 depends on USB
469 help
470 Say Y here if you want to use the Xbox DVD Movie Playback Kit.
471 These are IR remotes with USB receivers for the Original Xbox (2001).
472
473 To compile this driver as a module, choose M here: the module will be
474 called xbox_remote.
475
476source "drivers/media/rc/img-ir/Kconfig"
477
478endif #RC_DEVICES
479
480endif #RC_CORE