Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * ethtool.h: Defines for Linux ethtool.
4 *
5 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
6 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
7 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
8 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
9 * christopher.leech@intel.com,
10 * scott.feldman@intel.com)
11 * Portions Copyright (C) Sun Microsystems 2008
12 */
13#ifndef _LINUX_ETHTOOL_H
14#define _LINUX_ETHTOOL_H
15
16#include <linux/bitmap.h>
17#include <linux/compat.h>
18#include <uapi/linux/ethtool.h>
19
20#ifdef CONFIG_COMPAT
21
22struct compat_ethtool_rx_flow_spec {
23 u32 flow_type;
24 union ethtool_flow_union h_u;
25 struct ethtool_flow_ext h_ext;
26 union ethtool_flow_union m_u;
27 struct ethtool_flow_ext m_ext;
28 compat_u64 ring_cookie;
29 u32 location;
30};
31
32struct compat_ethtool_rxnfc {
33 u32 cmd;
34 u32 flow_type;
35 compat_u64 data;
36 struct compat_ethtool_rx_flow_spec fs;
37 u32 rule_cnt;
38 u32 rule_locs[];
39};
40
41#endif /* CONFIG_COMPAT */
42
43#include <linux/rculist.h>
44
45/**
46 * enum ethtool_phys_id_state - indicator state for physical identification
47 * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
48 * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
49 * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
50 * is not supported)
51 * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
52 * is not supported)
53 */
54enum ethtool_phys_id_state {
55 ETHTOOL_ID_INACTIVE,
56 ETHTOOL_ID_ACTIVE,
57 ETHTOOL_ID_ON,
58 ETHTOOL_ID_OFF
59};
60
61enum {
62 ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
63 ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
64 ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
65
66 /*
67 * Add your fresh new hash function bits above and remember to update
68 * rss_hash_func_strings[] in ethtool.c
69 */
70 ETH_RSS_HASH_FUNCS_COUNT
71};
72
73#define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
74#define __ETH_RSS_HASH(name) __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
75
76#define ETH_RSS_HASH_TOP __ETH_RSS_HASH(TOP)
77#define ETH_RSS_HASH_XOR __ETH_RSS_HASH(XOR)
78#define ETH_RSS_HASH_CRC32 __ETH_RSS_HASH(CRC32)
79
80#define ETH_RSS_HASH_UNKNOWN 0
81#define ETH_RSS_HASH_NO_CHANGE 0
82
83struct net_device;
84
85/* Some generic methods drivers may use in their ethtool_ops */
86u32 ethtool_op_get_link(struct net_device *dev);
87int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
88
89
90/**
91 * struct ethtool_link_ext_state_info - link extended state and substate.
92 */
93struct ethtool_link_ext_state_info {
94 enum ethtool_link_ext_state link_ext_state;
95 union {
96 enum ethtool_link_ext_substate_autoneg autoneg;
97 enum ethtool_link_ext_substate_link_training link_training;
98 enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch;
99 enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity;
100 enum ethtool_link_ext_substate_cable_issue cable_issue;
101 u8 __link_ext_substate;
102 };
103};
104
105/**
106 * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
107 * @index: Index in RX flow hash indirection table
108 * @n_rx_rings: Number of RX rings to use
109 *
110 * This function provides the default policy for RX flow hash indirection.
111 */
112static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
113{
114 return index % n_rx_rings;
115}
116
117/* declare a link mode bitmap */
118#define __ETHTOOL_DECLARE_LINK_MODE_MASK(name) \
119 DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
120
121/* drivers must ignore base.cmd and base.link_mode_masks_nwords
122 * fields, but they are allowed to overwrite them (will be ignored).
123 */
124struct ethtool_link_ksettings {
125 struct ethtool_link_settings base;
126 struct {
127 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
128 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
129 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
130 } link_modes;
131};
132
133/**
134 * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
135 * @ptr : pointer to struct ethtool_link_ksettings
136 * @name : one of supported/advertising/lp_advertising
137 */
138#define ethtool_link_ksettings_zero_link_mode(ptr, name) \
139 bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
140
141/**
142 * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
143 * link mode mask
144 * @ptr : pointer to struct ethtool_link_ksettings
145 * @name : one of supported/advertising/lp_advertising
146 * @mode : one of the ETHTOOL_LINK_MODE_*_BIT
147 * (not atomic, no bound checking)
148 */
149#define ethtool_link_ksettings_add_link_mode(ptr, name, mode) \
150 __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
151
152/**
153 * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
154 * link mode mask
155 * @ptr : pointer to struct ethtool_link_ksettings
156 * @name : one of supported/advertising/lp_advertising
157 * @mode : one of the ETHTOOL_LINK_MODE_*_BIT
158 * (not atomic, no bound checking)
159 */
160#define ethtool_link_ksettings_del_link_mode(ptr, name, mode) \
161 __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
162
163/**
164 * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
165 * @ptr : pointer to struct ethtool_link_ksettings
166 * @name : one of supported/advertising/lp_advertising
167 * @mode : one of the ETHTOOL_LINK_MODE_*_BIT
168 * (not atomic, no bound checking)
169 *
170 * Returns true/false.
171 */
172#define ethtool_link_ksettings_test_link_mode(ptr, name, mode) \
173 test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
174
175extern int
176__ethtool_get_link_ksettings(struct net_device *dev,
177 struct ethtool_link_ksettings *link_ksettings);
178
179/**
180 * ethtool_intersect_link_masks - Given two link masks, AND them together
181 * @dst: first mask and where result is stored
182 * @src: second mask to intersect with
183 *
184 * Given two link mode masks, AND them together and save the result in dst.
185 */
186void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
187 struct ethtool_link_ksettings *src);
188
189void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
190 u32 legacy_u32);
191
192/* return false if src had higher bits set. lower bits always updated. */
193bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
194 const unsigned long *src);
195
196#define ETHTOOL_COALESCE_RX_USECS BIT(0)
197#define ETHTOOL_COALESCE_RX_MAX_FRAMES BIT(1)
198#define ETHTOOL_COALESCE_RX_USECS_IRQ BIT(2)
199#define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ BIT(3)
200#define ETHTOOL_COALESCE_TX_USECS BIT(4)
201#define ETHTOOL_COALESCE_TX_MAX_FRAMES BIT(5)
202#define ETHTOOL_COALESCE_TX_USECS_IRQ BIT(6)
203#define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ BIT(7)
204#define ETHTOOL_COALESCE_STATS_BLOCK_USECS BIT(8)
205#define ETHTOOL_COALESCE_USE_ADAPTIVE_RX BIT(9)
206#define ETHTOOL_COALESCE_USE_ADAPTIVE_TX BIT(10)
207#define ETHTOOL_COALESCE_PKT_RATE_LOW BIT(11)
208#define ETHTOOL_COALESCE_RX_USECS_LOW BIT(12)
209#define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW BIT(13)
210#define ETHTOOL_COALESCE_TX_USECS_LOW BIT(14)
211#define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW BIT(15)
212#define ETHTOOL_COALESCE_PKT_RATE_HIGH BIT(16)
213#define ETHTOOL_COALESCE_RX_USECS_HIGH BIT(17)
214#define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH BIT(18)
215#define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19)
216#define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20)
217#define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21)
218
219#define ETHTOOL_COALESCE_USECS \
220 (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
221#define ETHTOOL_COALESCE_MAX_FRAMES \
222 (ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
223#define ETHTOOL_COALESCE_USECS_IRQ \
224 (ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
225#define ETHTOOL_COALESCE_MAX_FRAMES_IRQ \
226 (ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ | \
227 ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
228#define ETHTOOL_COALESCE_USE_ADAPTIVE \
229 (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
230#define ETHTOOL_COALESCE_USECS_LOW_HIGH \
231 (ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \
232 ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH)
233#define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH \
234 (ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW | \
235 ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW | \
236 ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH | \
237 ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH)
238#define ETHTOOL_COALESCE_PKT_RATE_RX_USECS \
239 (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | \
240 ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
241 ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
242 ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
243
244/**
245 * struct ethtool_ops - optional netdev operations
246 * @supported_coalesce_params: supported types of interrupt coalescing.
247 * @get_drvinfo: Report driver/device information. Should only set the
248 * @driver, @version, @fw_version and @bus_info fields. If not
249 * implemented, the @driver and @bus_info fields will be filled in
250 * according to the netdev's parent device.
251 * @get_regs_len: Get buffer length required for @get_regs
252 * @get_regs: Get device registers
253 * @get_wol: Report whether Wake-on-Lan is enabled
254 * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code
255 * or zero.
256 * @get_msglevel: Report driver message level. This should be the value
257 * of the @msg_enable field used by netif logging functions.
258 * @set_msglevel: Set driver message level
259 * @nway_reset: Restart autonegotiation. Returns a negative error code
260 * or zero.
261 * @get_link: Report whether physical link is up. Will only be called if
262 * the netdev is up. Should usually be set to ethtool_op_get_link(),
263 * which uses netif_carrier_ok().
264 * @get_link_ext_state: Report link extended state. Should set link_ext_state and
265 * link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown,
266 * do not attach ext_substate attribute to netlink message). If link_ext_state
267 * and link_ext_substate are unknown, return -ENODATA. If not implemented,
268 * link_ext_state and link_ext_substate will not be sent to userspace.
269 * @get_eeprom: Read data from the device EEPROM.
270 * Should fill in the magic field. Don't need to check len for zero
271 * or wraparound. Fill in the data argument with the eeprom values
272 * from offset to offset + len. Update len to the amount read.
273 * Returns an error or zero.
274 * @set_eeprom: Write data to the device EEPROM.
275 * Should validate the magic field. Don't need to check len for zero
276 * or wraparound. Update len to the amount written. Returns an error
277 * or zero.
278 * @get_coalesce: Get interrupt coalescing parameters. Returns a negative
279 * error code or zero.
280 * @set_coalesce: Set interrupt coalescing parameters. Supported coalescing
281 * types should be set in @supported_coalesce_params.
282 * Returns a negative error code or zero.
283 * @get_ringparam: Report ring sizes
284 * @set_ringparam: Set ring sizes. Returns a negative error code or zero.
285 * @get_pauseparam: Report pause parameters
286 * @set_pauseparam: Set pause parameters. Returns a negative error code
287 * or zero.
288 * @self_test: Run specified self-tests
289 * @get_strings: Return a set of strings that describe the requested objects
290 * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
291 * attached to it. The implementation may update the indicator
292 * asynchronously or synchronously, but in either case it must return
293 * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE,
294 * and must either activate asynchronous updates and return zero, return
295 * a negative error or return a positive frequency for synchronous
296 * indication (e.g. 1 for one on/off cycle per second). If it returns
297 * a frequency then it will be called again at intervals with the
298 * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
299 * the indicator accordingly. Finally, it is called with the argument
300 * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a
301 * negative error code or zero.
302 * @get_ethtool_stats: Return extended statistics about the device.
303 * This is only useful if the device maintains statistics not
304 * included in &struct rtnl_link_stats64.
305 * @begin: Function to be called before any other operation. Returns a
306 * negative error code or zero.
307 * @complete: Function to be called after any other operation except
308 * @begin. Will be called even if the other operation failed.
309 * @get_priv_flags: Report driver-specific feature flags.
310 * @set_priv_flags: Set driver-specific feature flags. Returns a negative
311 * error code or zero.
312 * @get_sset_count: Get number of strings that @get_strings will write.
313 * @get_rxnfc: Get RX flow classification rules. Returns a negative
314 * error code or zero.
315 * @set_rxnfc: Set RX flow classification rules. Returns a negative
316 * error code or zero.
317 * @flash_device: Write a firmware image to device's flash memory.
318 * Returns a negative error code or zero.
319 * @reset: Reset (part of) the device, as specified by a bitmask of
320 * flags from &enum ethtool_reset_flags. Returns a negative
321 * error code or zero.
322 * @get_rxfh_key_size: Get the size of the RX flow hash key.
323 * Returns zero if not supported for this specific device.
324 * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
325 * Returns zero if not supported for this specific device.
326 * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
327 * and/or hash function.
328 * Returns a negative error code or zero.
329 * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
330 * key, and/or hash function. Arguments which are set to %NULL or zero
331 * will remain unchanged.
332 * Returns a negative error code or zero. An error code must be returned
333 * if at least one unsupported change was requested.
334 * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
335 * hash key, and/or hash function assiciated to the given rss context.
336 * Returns a negative error code or zero.
337 * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
338 * the contents of the RX flow hash indirection table, hash key, and/or
339 * hash function associated to the given context. Arguments which are set
340 * to %NULL or zero will remain unchanged.
341 * Returns a negative error code or zero. An error code must be returned
342 * if at least one unsupported change was requested.
343 * @get_channels: Get number of channels.
344 * @set_channels: Set number of channels. Returns a negative error code or
345 * zero.
346 * @get_dump_flag: Get dump flag indicating current dump length, version,
347 * and flag of the device.
348 * @get_dump_data: Get dump data.
349 * @set_dump: Set dump specific flags to the device.
350 * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
351 * Drivers supporting transmit time stamps in software should set this to
352 * ethtool_op_get_ts_info().
353 * @get_module_info: Get the size and type of the eeprom contained within
354 * a plug-in module.
355 * @get_module_eeprom: Get the eeprom information from the plug-in module
356 * @get_eee: Get Energy-Efficient (EEE) supported and status.
357 * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
358 * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
359 * It must check that the given queue number is valid. If neither a RX nor
360 * a TX queue has this number, return -EINVAL. If only a RX queue or a TX
361 * queue has this number, set the inapplicable fields to ~0 and return 0.
362 * Returns a negative error code or zero.
363 * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
364 * It must check that the given queue number is valid. If neither a RX nor
365 * a TX queue has this number, return -EINVAL. If only a RX queue or a TX
366 * queue has this number, ignore the inapplicable fields. Supported
367 * coalescing types should be set in @supported_coalesce_params.
368 * Returns a negative error code or zero.
369 * @get_link_ksettings: Get various device settings including Ethernet link
370 * settings. The %cmd and %link_mode_masks_nwords fields should be
371 * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
372 * any change to them will be overwritten by kernel. Returns a negative
373 * error code or zero.
374 * @set_link_ksettings: Set various device settings including Ethernet link
375 * settings. The %cmd and %link_mode_masks_nwords fields should be
376 * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
377 * any change to them will be overwritten by kernel. Returns a negative
378 * error code or zero.
379 * @get_fecparam: Get the network device Forward Error Correction parameters.
380 * @set_fecparam: Set the network device Forward Error Correction parameters.
381 * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
382 * This is only useful if the device maintains PHY statistics and
383 * cannot use the standard PHY library helpers.
384 *
385 * All operations are optional (i.e. the function pointer may be set
386 * to %NULL) and callers must take this into account. Callers must
387 * hold the RTNL lock.
388 *
389 * See the structures used by these operations for further documentation.
390 * Note that for all operations using a structure ending with a zero-
391 * length array, the array is allocated separately in the kernel and
392 * is passed to the driver as an additional parameter.
393 *
394 * See &struct net_device and &struct net_device_ops for documentation
395 * of the generic netdev features interface.
396 */
397struct ethtool_ops {
398 u32 supported_coalesce_params;
399 void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
400 int (*get_regs_len)(struct net_device *);
401 void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
402 void (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
403 int (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
404 u32 (*get_msglevel)(struct net_device *);
405 void (*set_msglevel)(struct net_device *, u32);
406 int (*nway_reset)(struct net_device *);
407 u32 (*get_link)(struct net_device *);
408 int (*get_link_ext_state)(struct net_device *,
409 struct ethtool_link_ext_state_info *);
410 int (*get_eeprom_len)(struct net_device *);
411 int (*get_eeprom)(struct net_device *,
412 struct ethtool_eeprom *, u8 *);
413 int (*set_eeprom)(struct net_device *,
414 struct ethtool_eeprom *, u8 *);
415 int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
416 int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
417 void (*get_ringparam)(struct net_device *,
418 struct ethtool_ringparam *);
419 int (*set_ringparam)(struct net_device *,
420 struct ethtool_ringparam *);
421 void (*get_pauseparam)(struct net_device *,
422 struct ethtool_pauseparam*);
423 int (*set_pauseparam)(struct net_device *,
424 struct ethtool_pauseparam*);
425 void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
426 void (*get_strings)(struct net_device *, u32 stringset, u8 *);
427 int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
428 void (*get_ethtool_stats)(struct net_device *,
429 struct ethtool_stats *, u64 *);
430 int (*begin)(struct net_device *);
431 void (*complete)(struct net_device *);
432 u32 (*get_priv_flags)(struct net_device *);
433 int (*set_priv_flags)(struct net_device *, u32);
434 int (*get_sset_count)(struct net_device *, int);
435 int (*get_rxnfc)(struct net_device *,
436 struct ethtool_rxnfc *, u32 *rule_locs);
437 int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
438 int (*flash_device)(struct net_device *, struct ethtool_flash *);
439 int (*reset)(struct net_device *, u32 *);
440 u32 (*get_rxfh_key_size)(struct net_device *);
441 u32 (*get_rxfh_indir_size)(struct net_device *);
442 int (*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
443 u8 *hfunc);
444 int (*set_rxfh)(struct net_device *, const u32 *indir,
445 const u8 *key, const u8 hfunc);
446 int (*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
447 u8 *hfunc, u32 rss_context);
448 int (*set_rxfh_context)(struct net_device *, const u32 *indir,
449 const u8 *key, const u8 hfunc,
450 u32 *rss_context, bool delete);
451 void (*get_channels)(struct net_device *, struct ethtool_channels *);
452 int (*set_channels)(struct net_device *, struct ethtool_channels *);
453 int (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
454 int (*get_dump_data)(struct net_device *,
455 struct ethtool_dump *, void *);
456 int (*set_dump)(struct net_device *, struct ethtool_dump *);
457 int (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
458 int (*get_module_info)(struct net_device *,
459 struct ethtool_modinfo *);
460 int (*get_module_eeprom)(struct net_device *,
461 struct ethtool_eeprom *, u8 *);
462 int (*get_eee)(struct net_device *, struct ethtool_eee *);
463 int (*set_eee)(struct net_device *, struct ethtool_eee *);
464 int (*get_tunable)(struct net_device *,
465 const struct ethtool_tunable *, void *);
466 int (*set_tunable)(struct net_device *,
467 const struct ethtool_tunable *, const void *);
468 int (*get_per_queue_coalesce)(struct net_device *, u32,
469 struct ethtool_coalesce *);
470 int (*set_per_queue_coalesce)(struct net_device *, u32,
471 struct ethtool_coalesce *);
472 int (*get_link_ksettings)(struct net_device *,
473 struct ethtool_link_ksettings *);
474 int (*set_link_ksettings)(struct net_device *,
475 const struct ethtool_link_ksettings *);
476 int (*get_fecparam)(struct net_device *,
477 struct ethtool_fecparam *);
478 int (*set_fecparam)(struct net_device *,
479 struct ethtool_fecparam *);
480 void (*get_ethtool_phy_stats)(struct net_device *,
481 struct ethtool_stats *, u64 *);
482};
483
484int ethtool_check_ops(const struct ethtool_ops *ops);
485
486struct ethtool_rx_flow_rule {
487 struct flow_rule *rule;
488 unsigned long priv[];
489};
490
491struct ethtool_rx_flow_spec_input {
492 const struct ethtool_rx_flow_spec *fs;
493 u32 rss_ctx;
494};
495
496struct ethtool_rx_flow_rule *
497ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
498void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
499
500bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd);
501int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
502 const struct ethtool_link_ksettings *cmd,
503 u32 *dev_speed, u8 *dev_duplex);
504
505struct netlink_ext_ack;
506struct phy_device;
507struct phy_tdr_config;
508
509/**
510 * struct ethtool_phy_ops - Optional PHY device options
511 * @get_sset_count: Get number of strings that @get_strings will write.
512 * @get_strings: Return a set of strings that describe the requested objects
513 * @get_stats: Return extended statistics about the PHY device.
514 * @start_cable_test - Start a cable test
515 * @start_cable_test_tdr - Start a Time Domain Reflectometry cable test
516 *
517 * All operations are optional (i.e. the function pointer may be set to %NULL)
518 * and callers must take this into account. Callers must hold the RTNL lock.
519 */
520struct ethtool_phy_ops {
521 int (*get_sset_count)(struct phy_device *dev);
522 int (*get_strings)(struct phy_device *dev, u8 *data);
523 int (*get_stats)(struct phy_device *dev,
524 struct ethtool_stats *stats, u64 *data);
525 int (*start_cable_test)(struct phy_device *phydev,
526 struct netlink_ext_ack *extack);
527 int (*start_cable_test_tdr)(struct phy_device *phydev,
528 struct netlink_ext_ack *extack,
529 const struct phy_tdr_config *config);
530};
531
532/**
533 * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton
534 * @ops: Ethtool PHY operations to set
535 */
536void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops);
537
538#endif /* _LINUX_ETHTOOL_H */