Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v5.3-rc7 44 lines 2.0 kB view raw
1STMicroelectronics STM32 / MCU DWMAC glue layer controller 2 3This file documents platform glue layer for stmmac. 4Please see stmmac.txt for the other unchanged properties. 5 6The device node has following properties. 7 8Required properties: 9- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and 10 "snps,dwmac-3.50a" to select IP version. 11 For MPU family should be "st,stm32mp1-dwmac" to select 12 glue, and "snps,dwmac-4.20a" to select IP version. 13- clocks: Must contain a phandle for each entry in clock-names. 14- clock-names: Should be "stmmaceth" for the host clock. 15 Should be "mac-clk-tx" for the MAC TX clock. 16 Should be "mac-clk-rx" for the MAC RX clock. 17 For MPU family need to add also "ethstp" for power mode clock 18- interrupt-names: Should contain a list of interrupt names corresponding to 19 the interrupts in the interrupts property, if available. 20 Should be "macirq" for the main MAC IRQ 21 Should be "eth_wake_irq" for the IT which wake up system 22- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which 23 encompases the glue register, and the offset of the control register. 24 25Optional properties: 26- clock-names: For MPU family "eth-ck" for PHY without quartz 27- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. 28- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. 29 30Example: 31 32 ethernet@40028000 { 33 compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; 34 reg = <0x40028000 0x8000>; 35 reg-names = "stmmaceth"; 36 interrupts = <0 61 0>, <0 62 0>; 37 interrupt-names = "macirq", "eth_wake_irq"; 38 clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; 39 clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; 40 st,syscon = <&syscfg 0x4>; 41 snps,pbl = <8>; 42 snps,mixed-burst; 43 dma-ranges; 44 };