Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (c) 2001-2002 by David Brownell
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software Foundation,
17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20#ifndef __USB_CORE_HCD_H
21#define __USB_CORE_HCD_H
22
23#ifdef __KERNEL__
24
25#include <linux/rwsem.h>
26#include <linux/interrupt.h>
27#include <linux/idr.h>
28
29#define MAX_TOPO_LEVEL 6
30
31/* This file contains declarations of usbcore internals that are mostly
32 * used or exposed by Host Controller Drivers.
33 */
34
35/*
36 * USB Packet IDs (PIDs)
37 */
38#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
39#define USB_PID_OUT 0xe1
40#define USB_PID_ACK 0xd2
41#define USB_PID_DATA0 0xc3
42#define USB_PID_PING 0xb4 /* USB 2.0 */
43#define USB_PID_SOF 0xa5
44#define USB_PID_NYET 0x96 /* USB 2.0 */
45#define USB_PID_DATA2 0x87 /* USB 2.0 */
46#define USB_PID_SPLIT 0x78 /* USB 2.0 */
47#define USB_PID_IN 0x69
48#define USB_PID_NAK 0x5a
49#define USB_PID_DATA1 0x4b
50#define USB_PID_PREAMBLE 0x3c /* Token mode */
51#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
52#define USB_PID_SETUP 0x2d
53#define USB_PID_STALL 0x1e
54#define USB_PID_MDATA 0x0f /* USB 2.0 */
55
56/*-------------------------------------------------------------------------*/
57
58/*
59 * USB Host Controller Driver (usb_hcd) framework
60 *
61 * Since "struct usb_bus" is so thin, you can't share much code in it.
62 * This framework is a layer over that, and should be more sharable.
63 */
64
65/*-------------------------------------------------------------------------*/
66
67struct giveback_urb_bh {
68 bool running;
69 spinlock_t lock;
70 struct list_head head;
71 struct tasklet_struct bh;
72 struct usb_host_endpoint *completing_ep;
73};
74
75enum usb_dev_authorize_policy {
76 USB_DEVICE_AUTHORIZE_NONE = 0,
77 USB_DEVICE_AUTHORIZE_ALL = 1,
78 USB_DEVICE_AUTHORIZE_INTERNAL = 2,
79};
80
81struct usb_hcd {
82
83 /*
84 * housekeeping
85 */
86 struct usb_bus self; /* hcd is-a bus */
87 struct kref kref; /* reference counter */
88
89 const char *product_desc; /* product/vendor string */
90 int speed; /* Speed for this roothub.
91 * May be different from
92 * hcd->driver->flags & HCD_MASK
93 */
94 char irq_descr[24]; /* driver + bus # */
95
96 struct timer_list rh_timer; /* drives root-hub polling */
97 struct urb *status_urb; /* the current status urb */
98#ifdef CONFIG_PM
99 struct work_struct wakeup_work; /* for remote wakeup */
100#endif
101 struct work_struct died_work; /* for when the device dies */
102
103 /*
104 * hardware info/state
105 */
106 const struct hc_driver *driver; /* hw-specific hooks */
107
108 /*
109 * OTG and some Host controllers need software interaction with phys;
110 * other external phys should be software-transparent
111 */
112 struct usb_phy *usb_phy;
113 struct usb_phy_roothub *phy_roothub;
114
115 /* Flags that need to be manipulated atomically because they can
116 * change while the host controller is running. Always use
117 * set_bit() or clear_bit() to change their values.
118 */
119 unsigned long flags;
120#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
121#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
122#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
123#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
124#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
125#define HCD_FLAG_DEAD 6 /* controller has died? */
126#define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
127
128 /* The flags can be tested using these macros; they are likely to
129 * be slightly faster than test_bit().
130 */
131#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
132#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
133#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
134#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
135#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
136#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
137
138 /*
139 * Specifies if interfaces are authorized by default
140 * or they require explicit user space authorization; this bit is
141 * settable through /sys/class/usb_host/X/interface_authorized_default
142 */
143#define HCD_INTF_AUTHORIZED(hcd) \
144 ((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED))
145
146 /*
147 * Specifies if devices are authorized by default
148 * or they require explicit user space authorization; this bit is
149 * settable through /sys/class/usb_host/X/authorized_default
150 */
151 enum usb_dev_authorize_policy dev_policy;
152
153 /* Flags that get set only during HCD registration or removal. */
154 unsigned rh_registered:1;/* is root hub registered? */
155 unsigned rh_pollable:1; /* may we poll the root hub? */
156 unsigned msix_enabled:1; /* driver has MSI-X enabled? */
157 unsigned msi_enabled:1; /* driver has MSI enabled? */
158 /*
159 * do not manage the PHY state in the HCD core, instead let the driver
160 * handle this (for example if the PHY can only be turned on after a
161 * specific event)
162 */
163 unsigned skip_phy_initialization:1;
164
165 /* The next flag is a stopgap, to be removed when all the HCDs
166 * support the new root-hub polling mechanism. */
167 unsigned uses_new_polling:1;
168 unsigned wireless:1; /* Wireless USB HCD */
169 unsigned has_tt:1; /* Integrated TT in root hub */
170 unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
171 unsigned can_do_streams:1; /* HC supports streams */
172 unsigned tpl_support:1; /* OTG & EH TPL support */
173 unsigned cant_recv_wakeups:1;
174 /* wakeup requests from downstream aren't received */
175
176 unsigned int irq; /* irq allocated */
177 void __iomem *regs; /* device memory/io */
178 resource_size_t rsrc_start; /* memory/io resource start */
179 resource_size_t rsrc_len; /* memory/io resource length */
180 unsigned power_budget; /* in mA, 0 = no limit */
181
182 struct giveback_urb_bh high_prio_bh;
183 struct giveback_urb_bh low_prio_bh;
184
185 /* bandwidth_mutex should be taken before adding or removing
186 * any new bus bandwidth constraints:
187 * 1. Before adding a configuration for a new device.
188 * 2. Before removing the configuration to put the device into
189 * the addressed state.
190 * 3. Before selecting a different configuration.
191 * 4. Before selecting an alternate interface setting.
192 *
193 * bandwidth_mutex should be dropped after a successful control message
194 * to the device, or resetting the bandwidth after a failed attempt.
195 */
196 struct mutex *address0_mutex;
197 struct mutex *bandwidth_mutex;
198 struct usb_hcd *shared_hcd;
199 struct usb_hcd *primary_hcd;
200
201
202#define HCD_BUFFER_POOLS 4
203 struct dma_pool *pool[HCD_BUFFER_POOLS];
204
205 int state;
206# define __ACTIVE 0x01
207# define __SUSPEND 0x04
208# define __TRANSIENT 0x80
209
210# define HC_STATE_HALT 0
211# define HC_STATE_RUNNING (__ACTIVE)
212# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
213# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
214# define HC_STATE_SUSPENDED (__SUSPEND)
215
216#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
217#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
218
219 /* more shared queuing code would be good; it should support
220 * smarter scheduling, handle transaction translators, etc;
221 * input size of periodic table to an interrupt scheduler.
222 * (ohci 32, uhci 1024, ehci 256/512/1024).
223 */
224
225 /* The HC driver's private data is stored at the end of
226 * this structure.
227 */
228 unsigned long hcd_priv[0]
229 __attribute__ ((aligned(sizeof(s64))));
230};
231
232/* 2.4 does this a bit differently ... */
233static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
234{
235 return &hcd->self;
236}
237
238static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
239{
240 return container_of(bus, struct usb_hcd, self);
241}
242
243/*-------------------------------------------------------------------------*/
244
245
246struct hc_driver {
247 const char *description; /* "ehci-hcd" etc */
248 const char *product_desc; /* product/vendor string */
249 size_t hcd_priv_size; /* size of private data */
250
251 /* irq handler */
252 irqreturn_t (*irq) (struct usb_hcd *hcd);
253
254 int flags;
255#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
256#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
257#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
258#define HCD_USB11 0x0010 /* USB 1.1 */
259#define HCD_USB2 0x0020 /* USB 2.0 */
260#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
261#define HCD_USB3 0x0040 /* USB 3.0 */
262#define HCD_USB31 0x0050 /* USB 3.1 */
263#define HCD_USB32 0x0060 /* USB 3.2 */
264#define HCD_MASK 0x0070
265#define HCD_BH 0x0100 /* URB complete in BH context */
266
267 /* called to init HCD and root hub */
268 int (*reset) (struct usb_hcd *hcd);
269 int (*start) (struct usb_hcd *hcd);
270
271 /* NOTE: these suspend/resume calls relate to the HC as
272 * a whole, not just the root hub; they're for PCI bus glue.
273 */
274 /* called after suspending the hub, before entering D3 etc */
275 int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
276
277 /* called after entering D0 (etc), before resuming the hub */
278 int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
279
280 /* cleanly make HCD stop writing memory and doing I/O */
281 void (*stop) (struct usb_hcd *hcd);
282
283 /* shutdown HCD */
284 void (*shutdown) (struct usb_hcd *hcd);
285
286 /* return current frame number */
287 int (*get_frame_number) (struct usb_hcd *hcd);
288
289 /* manage i/o requests, device state */
290 int (*urb_enqueue)(struct usb_hcd *hcd,
291 struct urb *urb, gfp_t mem_flags);
292 int (*urb_dequeue)(struct usb_hcd *hcd,
293 struct urb *urb, int status);
294
295 /*
296 * (optional) these hooks allow an HCD to override the default DMA
297 * mapping and unmapping routines. In general, they shouldn't be
298 * necessary unless the host controller has special DMA requirements,
299 * such as alignment contraints. If these are not specified, the
300 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
301 * (and it may be a good idea to call these functions in your HCD
302 * implementation)
303 */
304 int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
305 gfp_t mem_flags);
306 void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
307
308 /* hw synch, freeing endpoint resources that urb_dequeue can't */
309 void (*endpoint_disable)(struct usb_hcd *hcd,
310 struct usb_host_endpoint *ep);
311
312 /* (optional) reset any endpoint state such as sequence number
313 and current window */
314 void (*endpoint_reset)(struct usb_hcd *hcd,
315 struct usb_host_endpoint *ep);
316
317 /* root hub support */
318 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
319 int (*hub_control) (struct usb_hcd *hcd,
320 u16 typeReq, u16 wValue, u16 wIndex,
321 char *buf, u16 wLength);
322 int (*bus_suspend)(struct usb_hcd *);
323 int (*bus_resume)(struct usb_hcd *);
324 int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
325 unsigned long (*get_resuming_ports)(struct usb_hcd *);
326
327 /* force handover of high-speed port to full-speed companion */
328 void (*relinquish_port)(struct usb_hcd *, int);
329 /* has a port been handed over to a companion? */
330 int (*port_handed_over)(struct usb_hcd *, int);
331
332 /* CLEAR_TT_BUFFER completion callback */
333 void (*clear_tt_buffer_complete)(struct usb_hcd *,
334 struct usb_host_endpoint *);
335
336 /* xHCI specific functions */
337 /* Called by usb_alloc_dev to alloc HC device structures */
338 int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
339 /* Called by usb_disconnect to free HC device structures */
340 void (*free_dev)(struct usb_hcd *, struct usb_device *);
341 /* Change a group of bulk endpoints to support multiple stream IDs */
342 int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
343 struct usb_host_endpoint **eps, unsigned int num_eps,
344 unsigned int num_streams, gfp_t mem_flags);
345 /* Reverts a group of bulk endpoints back to not using stream IDs.
346 * Can fail if we run out of memory.
347 */
348 int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
349 struct usb_host_endpoint **eps, unsigned int num_eps,
350 gfp_t mem_flags);
351
352 /* Bandwidth computation functions */
353 /* Note that add_endpoint() can only be called once per endpoint before
354 * check_bandwidth() or reset_bandwidth() must be called.
355 * drop_endpoint() can only be called once per endpoint also.
356 * A call to xhci_drop_endpoint() followed by a call to
357 * xhci_add_endpoint() will add the endpoint to the schedule with
358 * possibly new parameters denoted by a different endpoint descriptor
359 * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
360 * call to xhci_drop_endpoint() is not allowed.
361 */
362 /* Allocate endpoint resources and add them to a new schedule */
363 int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
364 struct usb_host_endpoint *);
365 /* Drop an endpoint from a new schedule */
366 int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
367 struct usb_host_endpoint *);
368 /* Check that a new hardware configuration, set using
369 * endpoint_enable and endpoint_disable, does not exceed bus
370 * bandwidth. This must be called before any set configuration
371 * or set interface requests are sent to the device.
372 */
373 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
374 /* Reset the device schedule to the last known good schedule,
375 * which was set from a previous successful call to
376 * check_bandwidth(). This reverts any add_endpoint() and
377 * drop_endpoint() calls since that last successful call.
378 * Used for when a check_bandwidth() call fails due to resource
379 * or bandwidth constraints.
380 */
381 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
382 /* Returns the hardware-chosen device address */
383 int (*address_device)(struct usb_hcd *, struct usb_device *udev);
384 /* prepares the hardware to send commands to the device */
385 int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
386 /* Notifies the HCD after a hub descriptor is fetched.
387 * Will block.
388 */
389 int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
390 struct usb_tt *tt, gfp_t mem_flags);
391 int (*reset_device)(struct usb_hcd *, struct usb_device *);
392 /* Notifies the HCD after a device is connected and its
393 * address is set
394 */
395 int (*update_device)(struct usb_hcd *, struct usb_device *);
396 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
397 /* USB 3.0 Link Power Management */
398 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
399 int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
400 struct usb_device *, enum usb3_link_state state);
401 /* The xHCI host controller can still fail the command to
402 * disable the LPM timeouts, so this can return an error code.
403 */
404 int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
405 struct usb_device *, enum usb3_link_state state);
406 int (*find_raw_port_number)(struct usb_hcd *, int);
407 /* Call for power on/off the port if necessary */
408 int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
409
410};
411
412static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
413{
414 return hcd->driver->flags & HCD_BH;
415}
416
417static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
418 struct usb_host_endpoint *ep)
419{
420 return hcd->high_prio_bh.completing_ep == ep;
421}
422
423extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
424extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
425 int status);
426extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
427
428extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
429extern int usb_hcd_unlink_urb(struct urb *urb, int status);
430extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
431 int status);
432extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
433 gfp_t mem_flags);
434extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
435extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
436extern void usb_hcd_flush_endpoint(struct usb_device *udev,
437 struct usb_host_endpoint *ep);
438extern void usb_hcd_disable_endpoint(struct usb_device *udev,
439 struct usb_host_endpoint *ep);
440extern void usb_hcd_reset_endpoint(struct usb_device *udev,
441 struct usb_host_endpoint *ep);
442extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
443extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
444 struct usb_host_config *new_config,
445 struct usb_host_interface *old_alt,
446 struct usb_host_interface *new_alt);
447extern int usb_hcd_get_frame_number(struct usb_device *udev);
448
449struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
450 struct device *sysdev, struct device *dev, const char *bus_name,
451 struct usb_hcd *primary_hcd);
452extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
453 struct device *dev, const char *bus_name);
454extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
455 struct device *dev, const char *bus_name,
456 struct usb_hcd *shared_hcd);
457extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
458extern void usb_put_hcd(struct usb_hcd *hcd);
459extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
460extern int usb_add_hcd(struct usb_hcd *hcd,
461 unsigned int irqnum, unsigned long irqflags);
462extern void usb_remove_hcd(struct usb_hcd *hcd);
463extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
464
465struct platform_device;
466extern void usb_hcd_platform_shutdown(struct platform_device *dev);
467
468#ifdef CONFIG_USB_PCI
469struct pci_dev;
470struct pci_device_id;
471extern int usb_hcd_pci_probe(struct pci_dev *dev,
472 const struct pci_device_id *id);
473extern void usb_hcd_pci_remove(struct pci_dev *dev);
474extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
475
476extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
477
478#ifdef CONFIG_PM
479extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
480#endif
481#endif /* CONFIG_USB_PCI */
482
483/* pci-ish (pdev null is ok) buffer alloc/mapping support */
484void usb_init_pool_max(void);
485int hcd_buffer_create(struct usb_hcd *hcd);
486void hcd_buffer_destroy(struct usb_hcd *hcd);
487
488void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
489 gfp_t mem_flags, dma_addr_t *dma);
490void hcd_buffer_free(struct usb_bus *bus, size_t size,
491 void *addr, dma_addr_t dma);
492
493/* generic bus glue, needed for host controllers that don't use PCI */
494extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
495
496extern void usb_hc_died(struct usb_hcd *hcd);
497extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
498extern void usb_wakeup_notification(struct usb_device *hdev,
499 unsigned int portnum);
500
501extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
502extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
503
504/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
505#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
506#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
507#define usb_settoggle(dev, ep, out, bit) \
508 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
509 ((bit) << (ep)))
510
511/* -------------------------------------------------------------------------- */
512
513/* Enumeration is only for the hub driver, or HCD virtual root hubs */
514extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
515 struct usb_bus *, unsigned port);
516extern int usb_new_device(struct usb_device *dev);
517extern void usb_disconnect(struct usb_device **);
518
519extern int usb_get_configuration(struct usb_device *dev);
520extern void usb_destroy_configuration(struct usb_device *dev);
521
522/*-------------------------------------------------------------------------*/
523
524/*
525 * HCD Root Hub support
526 */
527
528#include <linux/usb/ch11.h>
529
530/*
531 * As of USB 2.0, full/low speed devices are segregated into trees.
532 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
533 * The other type grows from high speed hubs when they connect to
534 * full/low speed devices using "Transaction Translators" (TTs).
535 *
536 * TTs should only be known to the hub driver, and high speed bus
537 * drivers (only EHCI for now). They affect periodic scheduling and
538 * sometimes control/bulk error recovery.
539 */
540
541struct usb_device;
542
543struct usb_tt {
544 struct usb_device *hub; /* upstream highspeed hub */
545 int multi; /* true means one TT per port */
546 unsigned think_time; /* think time in ns */
547 void *hcpriv; /* HCD private data */
548
549 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
550 spinlock_t lock;
551 struct list_head clear_list; /* of usb_tt_clear */
552 struct work_struct clear_work;
553};
554
555struct usb_tt_clear {
556 struct list_head clear_list;
557 unsigned tt;
558 u16 devinfo;
559 struct usb_hcd *hcd;
560 struct usb_host_endpoint *ep;
561};
562
563extern int usb_hub_clear_tt_buffer(struct urb *urb);
564extern void usb_ep0_reinit(struct usb_device *);
565
566/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
567#define DeviceRequest \
568 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
569#define DeviceOutRequest \
570 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
571
572#define InterfaceRequest \
573 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
574
575#define EndpointRequest \
576 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
577#define EndpointOutRequest \
578 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
579
580/* class requests from the USB 2.0 hub spec, table 11-15 */
581#define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
582/* GetBusState and SetHubDescriptor are optional, omitted */
583#define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE)
584#define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE)
585#define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR)
586#define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS)
587#define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS)
588#define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE)
589#define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE)
590
591
592/*-------------------------------------------------------------------------*/
593
594/* class requests from USB 3.1 hub spec, table 10-7 */
595#define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH)
596#define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT)
597
598/*
599 * Generic bandwidth allocation constants/support
600 */
601#define FRAME_TIME_USECS 1000L
602#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
603 /* Trying not to use worst-case bit-stuffing
604 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
605 /* bytecount = data payload byte count */
606
607#define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
608 /* convert nanoseconds to microseconds, rounding up */
609
610/*
611 * Full/low speed bandwidth allocation constants/support.
612 */
613#define BW_HOST_DELAY 1000L /* nanoseconds */
614#define BW_HUB_LS_SETUP 333L /* nanoseconds */
615 /* 4 full-speed bit times (est.) */
616
617#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
618#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
619#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
620
621/*
622 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
623 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
624 * to preallocate bandwidth)
625 */
626#define USB2_HOST_DELAY 5 /* nsec, guess */
627#define HS_NSECS(bytes) (((55 * 8 * 2083) \
628 + (2083UL * (3 + BitTime(bytes))))/1000 \
629 + USB2_HOST_DELAY)
630#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
631 + (2083UL * (3 + BitTime(bytes))))/1000 \
632 + USB2_HOST_DELAY)
633#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
634#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
635
636extern long usb_calc_bus_time(int speed, int is_input,
637 int isoc, int bytecount);
638
639/*-------------------------------------------------------------------------*/
640
641extern void usb_set_device_state(struct usb_device *udev,
642 enum usb_device_state new_state);
643
644/*-------------------------------------------------------------------------*/
645
646/* exported only within usbcore */
647
648extern struct idr usb_bus_idr;
649extern struct mutex usb_bus_idr_lock;
650extern wait_queue_head_t usb_kill_urb_queue;
651
652
653#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
654
655#ifdef CONFIG_PM
656extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev);
657extern void usb_root_hub_lost_power(struct usb_device *rhdev);
658extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
659extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
660extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
661#else
662static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
663{
664 return 0;
665}
666static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
667{
668 return;
669}
670#endif /* CONFIG_PM */
671
672/*-------------------------------------------------------------------------*/
673
674#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
675
676struct usb_mon_operations {
677 void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
678 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
679 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
680 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
681};
682
683extern const struct usb_mon_operations *mon_ops;
684
685static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
686{
687 if (bus->monitored)
688 (*mon_ops->urb_submit)(bus, urb);
689}
690
691static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
692 int error)
693{
694 if (bus->monitored)
695 (*mon_ops->urb_submit_error)(bus, urb, error);
696}
697
698static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
699 int status)
700{
701 if (bus->monitored)
702 (*mon_ops->urb_complete)(bus, urb, status);
703}
704
705int usb_mon_register(const struct usb_mon_operations *ops);
706void usb_mon_deregister(void);
707
708#else
709
710static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
711static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
712 int error) {}
713static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
714 int status) {}
715
716#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
717
718/*-------------------------------------------------------------------------*/
719
720/* random stuff */
721
722#define RUN_CONTEXT (in_irq() ? "in_irq" \
723 : (in_interrupt() ? "in_interrupt" : "can sleep"))
724
725
726/* This rwsem is for use only by the hub driver and ehci-hcd.
727 * Nobody else should touch it.
728 */
729extern struct rw_semaphore ehci_cf_port_reset_rwsem;
730
731/* Keep track of which host controller drivers are loaded */
732#define USB_UHCI_LOADED 0
733#define USB_OHCI_LOADED 1
734#define USB_EHCI_LOADED 2
735extern unsigned long usb_hcds_loaded;
736
737#endif /* __KERNEL__ */
738
739#endif /* __USB_CORE_HCD_H */