Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
at v5.2 1276 lines 34 kB view raw
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Xilinx SystemACE device driver 4 * 5 * Copyright 2007 Secret Lab Technologies Ltd. 6 */ 7 8/* 9 * The SystemACE chip is designed to configure FPGAs by loading an FPGA 10 * bitstream from a file on a CF card and squirting it into FPGAs connected 11 * to the SystemACE JTAG chain. It also has the advantage of providing an 12 * MPU interface which can be used to control the FPGA configuration process 13 * and to use the attached CF card for general purpose storage. 14 * 15 * This driver is a block device driver for the SystemACE. 16 * 17 * Initialization: 18 * The driver registers itself as a platform_device driver at module 19 * load time. The platform bus will take care of calling the 20 * ace_probe() method for all SystemACE instances in the system. Any 21 * number of SystemACE instances are supported. ace_probe() calls 22 * ace_setup() which initialized all data structures, reads the CF 23 * id structure and registers the device. 24 * 25 * Processing: 26 * Just about all of the heavy lifting in this driver is performed by 27 * a Finite State Machine (FSM). The driver needs to wait on a number 28 * of events; some raised by interrupts, some which need to be polled 29 * for. Describing all of the behaviour in a FSM seems to be the 30 * easiest way to keep the complexity low and make it easy to 31 * understand what the driver is doing. If the block ops or the 32 * request function need to interact with the hardware, then they 33 * simply need to flag the request and kick of FSM processing. 34 * 35 * The FSM itself is atomic-safe code which can be run from any 36 * context. The general process flow is: 37 * 1. obtain the ace->lock spinlock. 38 * 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is 39 * cleared. 40 * 3. release the lock. 41 * 42 * Individual states do not sleep in any way. If a condition needs to 43 * be waited for then the state much clear the fsm_continue flag and 44 * either schedule the FSM to be run again at a later time, or expect 45 * an interrupt to call the FSM when the desired condition is met. 46 * 47 * In normal operation, the FSM is processed at interrupt context 48 * either when the driver's tasklet is scheduled, or when an irq is 49 * raised by the hardware. The tasklet can be scheduled at any time. 50 * The request method in particular schedules the tasklet when a new 51 * request has been indicated by the block layer. Once started, the 52 * FSM proceeds as far as it can processing the request until it 53 * needs on a hardware event. At this point, it must yield execution. 54 * 55 * A state has two options when yielding execution: 56 * 1. ace_fsm_yield() 57 * - Call if need to poll for event. 58 * - clears the fsm_continue flag to exit the processing loop 59 * - reschedules the tasklet to run again as soon as possible 60 * 2. ace_fsm_yieldirq() 61 * - Call if an irq is expected from the HW 62 * - clears the fsm_continue flag to exit the processing loop 63 * - does not reschedule the tasklet so the FSM will not be processed 64 * again until an irq is received. 65 * After calling a yield function, the state must return control back 66 * to the FSM main loop. 67 * 68 * Additionally, the driver maintains a kernel timer which can process 69 * the FSM. If the FSM gets stalled, typically due to a missed 70 * interrupt, then the kernel timer will expire and the driver can 71 * continue where it left off. 72 * 73 * To Do: 74 * - Add FPGA configuration control interface. 75 * - Request major number from lanana 76 */ 77 78#undef DEBUG 79 80#include <linux/module.h> 81#include <linux/ctype.h> 82#include <linux/init.h> 83#include <linux/interrupt.h> 84#include <linux/errno.h> 85#include <linux/kernel.h> 86#include <linux/delay.h> 87#include <linux/slab.h> 88#include <linux/blk-mq.h> 89#include <linux/mutex.h> 90#include <linux/ata.h> 91#include <linux/hdreg.h> 92#include <linux/platform_device.h> 93#if defined(CONFIG_OF) 94#include <linux/of_address.h> 95#include <linux/of_device.h> 96#include <linux/of_platform.h> 97#endif 98 99MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); 100MODULE_DESCRIPTION("Xilinx SystemACE device driver"); 101MODULE_LICENSE("GPL"); 102 103/* SystemACE register definitions */ 104#define ACE_BUSMODE (0x00) 105 106#define ACE_STATUS (0x04) 107#define ACE_STATUS_CFGLOCK (0x00000001) 108#define ACE_STATUS_MPULOCK (0x00000002) 109#define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */ 110#define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */ 111#define ACE_STATUS_CFDETECT (0x00000010) 112#define ACE_STATUS_DATABUFRDY (0x00000020) 113#define ACE_STATUS_DATABUFMODE (0x00000040) 114#define ACE_STATUS_CFGDONE (0x00000080) 115#define ACE_STATUS_RDYFORCFCMD (0x00000100) 116#define ACE_STATUS_CFGMODEPIN (0x00000200) 117#define ACE_STATUS_CFGADDR_MASK (0x0000e000) 118#define ACE_STATUS_CFBSY (0x00020000) 119#define ACE_STATUS_CFRDY (0x00040000) 120#define ACE_STATUS_CFDWF (0x00080000) 121#define ACE_STATUS_CFDSC (0x00100000) 122#define ACE_STATUS_CFDRQ (0x00200000) 123#define ACE_STATUS_CFCORR (0x00400000) 124#define ACE_STATUS_CFERR (0x00800000) 125 126#define ACE_ERROR (0x08) 127#define ACE_CFGLBA (0x0c) 128#define ACE_MPULBA (0x10) 129 130#define ACE_SECCNTCMD (0x14) 131#define ACE_SECCNTCMD_RESET (0x0100) 132#define ACE_SECCNTCMD_IDENTIFY (0x0200) 133#define ACE_SECCNTCMD_READ_DATA (0x0300) 134#define ACE_SECCNTCMD_WRITE_DATA (0x0400) 135#define ACE_SECCNTCMD_ABORT (0x0600) 136 137#define ACE_VERSION (0x16) 138#define ACE_VERSION_REVISION_MASK (0x00FF) 139#define ACE_VERSION_MINOR_MASK (0x0F00) 140#define ACE_VERSION_MAJOR_MASK (0xF000) 141 142#define ACE_CTRL (0x18) 143#define ACE_CTRL_FORCELOCKREQ (0x0001) 144#define ACE_CTRL_LOCKREQ (0x0002) 145#define ACE_CTRL_FORCECFGADDR (0x0004) 146#define ACE_CTRL_FORCECFGMODE (0x0008) 147#define ACE_CTRL_CFGMODE (0x0010) 148#define ACE_CTRL_CFGSTART (0x0020) 149#define ACE_CTRL_CFGSEL (0x0040) 150#define ACE_CTRL_CFGRESET (0x0080) 151#define ACE_CTRL_DATABUFRDYIRQ (0x0100) 152#define ACE_CTRL_ERRORIRQ (0x0200) 153#define ACE_CTRL_CFGDONEIRQ (0x0400) 154#define ACE_CTRL_RESETIRQ (0x0800) 155#define ACE_CTRL_CFGPROG (0x1000) 156#define ACE_CTRL_CFGADDR_MASK (0xe000) 157 158#define ACE_FATSTAT (0x1c) 159 160#define ACE_NUM_MINORS 16 161#define ACE_SECTOR_SIZE (512) 162#define ACE_FIFO_SIZE (32) 163#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE) 164 165#define ACE_BUS_WIDTH_8 0 166#define ACE_BUS_WIDTH_16 1 167 168struct ace_reg_ops; 169 170struct ace_device { 171 /* driver state data */ 172 int id; 173 int media_change; 174 int users; 175 struct list_head list; 176 177 /* finite state machine data */ 178 struct tasklet_struct fsm_tasklet; 179 uint fsm_task; /* Current activity (ACE_TASK_*) */ 180 uint fsm_state; /* Current state (ACE_FSM_STATE_*) */ 181 uint fsm_continue_flag; /* cleared to exit FSM mainloop */ 182 uint fsm_iter_num; 183 struct timer_list stall_timer; 184 185 /* Transfer state/result, use for both id and block request */ 186 struct request *req; /* request being processed */ 187 void *data_ptr; /* pointer to I/O buffer */ 188 int data_count; /* number of buffers remaining */ 189 int data_result; /* Result of transfer; 0 := success */ 190 191 int id_req_count; /* count of id requests */ 192 int id_result; 193 struct completion id_completion; /* used when id req finishes */ 194 int in_irq; 195 196 /* Details of hardware device */ 197 resource_size_t physaddr; 198 void __iomem *baseaddr; 199 int irq; 200 int bus_width; /* 0 := 8 bit; 1 := 16 bit */ 201 struct ace_reg_ops *reg_ops; 202 int lock_count; 203 204 /* Block device data structures */ 205 spinlock_t lock; 206 struct device *dev; 207 struct request_queue *queue; 208 struct gendisk *gd; 209 struct blk_mq_tag_set tag_set; 210 struct list_head rq_list; 211 212 /* Inserted CF card parameters */ 213 u16 cf_id[ATA_ID_WORDS]; 214}; 215 216static DEFINE_MUTEX(xsysace_mutex); 217static int ace_major; 218 219/* --------------------------------------------------------------------- 220 * Low level register access 221 */ 222 223struct ace_reg_ops { 224 u16(*in) (struct ace_device * ace, int reg); 225 void (*out) (struct ace_device * ace, int reg, u16 val); 226 void (*datain) (struct ace_device * ace); 227 void (*dataout) (struct ace_device * ace); 228}; 229 230/* 8 Bit bus width */ 231static u16 ace_in_8(struct ace_device *ace, int reg) 232{ 233 void __iomem *r = ace->baseaddr + reg; 234 return in_8(r) | (in_8(r + 1) << 8); 235} 236 237static void ace_out_8(struct ace_device *ace, int reg, u16 val) 238{ 239 void __iomem *r = ace->baseaddr + reg; 240 out_8(r, val); 241 out_8(r + 1, val >> 8); 242} 243 244static void ace_datain_8(struct ace_device *ace) 245{ 246 void __iomem *r = ace->baseaddr + 0x40; 247 u8 *dst = ace->data_ptr; 248 int i = ACE_FIFO_SIZE; 249 while (i--) 250 *dst++ = in_8(r++); 251 ace->data_ptr = dst; 252} 253 254static void ace_dataout_8(struct ace_device *ace) 255{ 256 void __iomem *r = ace->baseaddr + 0x40; 257 u8 *src = ace->data_ptr; 258 int i = ACE_FIFO_SIZE; 259 while (i--) 260 out_8(r++, *src++); 261 ace->data_ptr = src; 262} 263 264static struct ace_reg_ops ace_reg_8_ops = { 265 .in = ace_in_8, 266 .out = ace_out_8, 267 .datain = ace_datain_8, 268 .dataout = ace_dataout_8, 269}; 270 271/* 16 bit big endian bus attachment */ 272static u16 ace_in_be16(struct ace_device *ace, int reg) 273{ 274 return in_be16(ace->baseaddr + reg); 275} 276 277static void ace_out_be16(struct ace_device *ace, int reg, u16 val) 278{ 279 out_be16(ace->baseaddr + reg, val); 280} 281 282static void ace_datain_be16(struct ace_device *ace) 283{ 284 int i = ACE_FIFO_SIZE / 2; 285 u16 *dst = ace->data_ptr; 286 while (i--) 287 *dst++ = in_le16(ace->baseaddr + 0x40); 288 ace->data_ptr = dst; 289} 290 291static void ace_dataout_be16(struct ace_device *ace) 292{ 293 int i = ACE_FIFO_SIZE / 2; 294 u16 *src = ace->data_ptr; 295 while (i--) 296 out_le16(ace->baseaddr + 0x40, *src++); 297 ace->data_ptr = src; 298} 299 300/* 16 bit little endian bus attachment */ 301static u16 ace_in_le16(struct ace_device *ace, int reg) 302{ 303 return in_le16(ace->baseaddr + reg); 304} 305 306static void ace_out_le16(struct ace_device *ace, int reg, u16 val) 307{ 308 out_le16(ace->baseaddr + reg, val); 309} 310 311static void ace_datain_le16(struct ace_device *ace) 312{ 313 int i = ACE_FIFO_SIZE / 2; 314 u16 *dst = ace->data_ptr; 315 while (i--) 316 *dst++ = in_be16(ace->baseaddr + 0x40); 317 ace->data_ptr = dst; 318} 319 320static void ace_dataout_le16(struct ace_device *ace) 321{ 322 int i = ACE_FIFO_SIZE / 2; 323 u16 *src = ace->data_ptr; 324 while (i--) 325 out_be16(ace->baseaddr + 0x40, *src++); 326 ace->data_ptr = src; 327} 328 329static struct ace_reg_ops ace_reg_be16_ops = { 330 .in = ace_in_be16, 331 .out = ace_out_be16, 332 .datain = ace_datain_be16, 333 .dataout = ace_dataout_be16, 334}; 335 336static struct ace_reg_ops ace_reg_le16_ops = { 337 .in = ace_in_le16, 338 .out = ace_out_le16, 339 .datain = ace_datain_le16, 340 .dataout = ace_dataout_le16, 341}; 342 343static inline u16 ace_in(struct ace_device *ace, int reg) 344{ 345 return ace->reg_ops->in(ace, reg); 346} 347 348static inline u32 ace_in32(struct ace_device *ace, int reg) 349{ 350 return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16); 351} 352 353static inline void ace_out(struct ace_device *ace, int reg, u16 val) 354{ 355 ace->reg_ops->out(ace, reg, val); 356} 357 358static inline void ace_out32(struct ace_device *ace, int reg, u32 val) 359{ 360 ace_out(ace, reg, val); 361 ace_out(ace, reg + 2, val >> 16); 362} 363 364/* --------------------------------------------------------------------- 365 * Debug support functions 366 */ 367 368#if defined(DEBUG) 369static void ace_dump_mem(void *base, int len) 370{ 371 const char *ptr = base; 372 int i, j; 373 374 for (i = 0; i < len; i += 16) { 375 printk(KERN_INFO "%.8x:", i); 376 for (j = 0; j < 16; j++) { 377 if (!(j % 4)) 378 printk(" "); 379 printk("%.2x", ptr[i + j]); 380 } 381 printk(" "); 382 for (j = 0; j < 16; j++) 383 printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.'); 384 printk("\n"); 385 } 386} 387#else 388static inline void ace_dump_mem(void *base, int len) 389{ 390} 391#endif 392 393static void ace_dump_regs(struct ace_device *ace) 394{ 395 dev_info(ace->dev, 396 " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" 397 " status:%.8x mpu_lba:%.8x busmode:%4x\n" 398 " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", 399 ace_in32(ace, ACE_CTRL), 400 ace_in(ace, ACE_SECCNTCMD), 401 ace_in(ace, ACE_VERSION), 402 ace_in32(ace, ACE_STATUS), 403 ace_in32(ace, ACE_MPULBA), 404 ace_in(ace, ACE_BUSMODE), 405 ace_in32(ace, ACE_ERROR), 406 ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT)); 407} 408 409static void ace_fix_driveid(u16 *id) 410{ 411#if defined(__BIG_ENDIAN) 412 int i; 413 414 /* All half words have wrong byte order; swap the bytes */ 415 for (i = 0; i < ATA_ID_WORDS; i++, id++) 416 *id = le16_to_cpu(*id); 417#endif 418} 419 420/* --------------------------------------------------------------------- 421 * Finite State Machine (FSM) implementation 422 */ 423 424/* FSM tasks; used to direct state transitions */ 425#define ACE_TASK_IDLE 0 426#define ACE_TASK_IDENTIFY 1 427#define ACE_TASK_READ 2 428#define ACE_TASK_WRITE 3 429#define ACE_FSM_NUM_TASKS 4 430 431/* FSM state definitions */ 432#define ACE_FSM_STATE_IDLE 0 433#define ACE_FSM_STATE_REQ_LOCK 1 434#define ACE_FSM_STATE_WAIT_LOCK 2 435#define ACE_FSM_STATE_WAIT_CFREADY 3 436#define ACE_FSM_STATE_IDENTIFY_PREPARE 4 437#define ACE_FSM_STATE_IDENTIFY_TRANSFER 5 438#define ACE_FSM_STATE_IDENTIFY_COMPLETE 6 439#define ACE_FSM_STATE_REQ_PREPARE 7 440#define ACE_FSM_STATE_REQ_TRANSFER 8 441#define ACE_FSM_STATE_REQ_COMPLETE 9 442#define ACE_FSM_STATE_ERROR 10 443#define ACE_FSM_NUM_STATES 11 444 445/* Set flag to exit FSM loop and reschedule tasklet */ 446static inline void ace_fsm_yield(struct ace_device *ace) 447{ 448 dev_dbg(ace->dev, "ace_fsm_yield()\n"); 449 tasklet_schedule(&ace->fsm_tasklet); 450 ace->fsm_continue_flag = 0; 451} 452 453/* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */ 454static inline void ace_fsm_yieldirq(struct ace_device *ace) 455{ 456 dev_dbg(ace->dev, "ace_fsm_yieldirq()\n"); 457 458 if (!ace->irq) 459 /* No IRQ assigned, so need to poll */ 460 tasklet_schedule(&ace->fsm_tasklet); 461 ace->fsm_continue_flag = 0; 462} 463 464static bool ace_has_next_request(struct request_queue *q) 465{ 466 struct ace_device *ace = q->queuedata; 467 468 return !list_empty(&ace->rq_list); 469} 470 471/* Get the next read/write request; ending requests that we don't handle */ 472static struct request *ace_get_next_request(struct request_queue *q) 473{ 474 struct ace_device *ace = q->queuedata; 475 struct request *rq; 476 477 rq = list_first_entry_or_null(&ace->rq_list, struct request, queuelist); 478 if (rq) { 479 list_del_init(&rq->queuelist); 480 blk_mq_start_request(rq); 481 } 482 483 return NULL; 484} 485 486static void ace_fsm_dostate(struct ace_device *ace) 487{ 488 struct request *req; 489 u32 status; 490 u16 val; 491 int count; 492 493#if defined(DEBUG) 494 dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n", 495 ace->fsm_state, ace->id_req_count); 496#endif 497 498 /* Verify that there is actually a CF in the slot. If not, then 499 * bail out back to the idle state and wake up all the waiters */ 500 status = ace_in32(ace, ACE_STATUS); 501 if ((status & ACE_STATUS_CFDETECT) == 0) { 502 ace->fsm_state = ACE_FSM_STATE_IDLE; 503 ace->media_change = 1; 504 set_capacity(ace->gd, 0); 505 dev_info(ace->dev, "No CF in slot\n"); 506 507 /* Drop all in-flight and pending requests */ 508 if (ace->req) { 509 blk_mq_end_request(ace->req, BLK_STS_IOERR); 510 ace->req = NULL; 511 } 512 while ((req = ace_get_next_request(ace->queue)) != NULL) 513 blk_mq_end_request(req, BLK_STS_IOERR); 514 515 /* Drop back to IDLE state and notify waiters */ 516 ace->fsm_state = ACE_FSM_STATE_IDLE; 517 ace->id_result = -EIO; 518 while (ace->id_req_count) { 519 complete(&ace->id_completion); 520 ace->id_req_count--; 521 } 522 } 523 524 switch (ace->fsm_state) { 525 case ACE_FSM_STATE_IDLE: 526 /* See if there is anything to do */ 527 if (ace->id_req_count || ace_has_next_request(ace->queue)) { 528 ace->fsm_iter_num++; 529 ace->fsm_state = ACE_FSM_STATE_REQ_LOCK; 530 mod_timer(&ace->stall_timer, jiffies + HZ); 531 if (!timer_pending(&ace->stall_timer)) 532 add_timer(&ace->stall_timer); 533 break; 534 } 535 del_timer(&ace->stall_timer); 536 ace->fsm_continue_flag = 0; 537 break; 538 539 case ACE_FSM_STATE_REQ_LOCK: 540 if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { 541 /* Already have the lock, jump to next state */ 542 ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; 543 break; 544 } 545 546 /* Request the lock */ 547 val = ace_in(ace, ACE_CTRL); 548 ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ); 549 ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK; 550 break; 551 552 case ACE_FSM_STATE_WAIT_LOCK: 553 if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { 554 /* got the lock; move to next state */ 555 ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; 556 break; 557 } 558 559 /* wait a bit for the lock */ 560 ace_fsm_yield(ace); 561 break; 562 563 case ACE_FSM_STATE_WAIT_CFREADY: 564 status = ace_in32(ace, ACE_STATUS); 565 if (!(status & ACE_STATUS_RDYFORCFCMD) || 566 (status & ACE_STATUS_CFBSY)) { 567 /* CF card isn't ready; it needs to be polled */ 568 ace_fsm_yield(ace); 569 break; 570 } 571 572 /* Device is ready for command; determine what to do next */ 573 if (ace->id_req_count) 574 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE; 575 else 576 ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE; 577 break; 578 579 case ACE_FSM_STATE_IDENTIFY_PREPARE: 580 /* Send identify command */ 581 ace->fsm_task = ACE_TASK_IDENTIFY; 582 ace->data_ptr = ace->cf_id; 583 ace->data_count = ACE_BUF_PER_SECTOR; 584 ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY); 585 586 /* As per datasheet, put config controller in reset */ 587 val = ace_in(ace, ACE_CTRL); 588 ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); 589 590 /* irq handler takes over from this point; wait for the 591 * transfer to complete */ 592 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER; 593 ace_fsm_yieldirq(ace); 594 break; 595 596 case ACE_FSM_STATE_IDENTIFY_TRANSFER: 597 /* Check that the sysace is ready to receive data */ 598 status = ace_in32(ace, ACE_STATUS); 599 if (status & ACE_STATUS_CFBSY) { 600 dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n", 601 ace->fsm_task, ace->fsm_iter_num, 602 ace->data_count); 603 ace_fsm_yield(ace); 604 break; 605 } 606 if (!(status & ACE_STATUS_DATABUFRDY)) { 607 ace_fsm_yield(ace); 608 break; 609 } 610 611 /* Transfer the next buffer */ 612 ace->reg_ops->datain(ace); 613 ace->data_count--; 614 615 /* If there are still buffers to be transfers; jump out here */ 616 if (ace->data_count != 0) { 617 ace_fsm_yieldirq(ace); 618 break; 619 } 620 621 /* transfer finished; kick state machine */ 622 dev_dbg(ace->dev, "identify finished\n"); 623 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE; 624 break; 625 626 case ACE_FSM_STATE_IDENTIFY_COMPLETE: 627 ace_fix_driveid(ace->cf_id); 628 ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */ 629 630 if (ace->data_result) { 631 /* Error occurred, disable the disk */ 632 ace->media_change = 1; 633 set_capacity(ace->gd, 0); 634 dev_err(ace->dev, "error fetching CF id (%i)\n", 635 ace->data_result); 636 } else { 637 ace->media_change = 0; 638 639 /* Record disk parameters */ 640 set_capacity(ace->gd, 641 ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); 642 dev_info(ace->dev, "capacity: %i sectors\n", 643 ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); 644 } 645 646 /* We're done, drop to IDLE state and notify waiters */ 647 ace->fsm_state = ACE_FSM_STATE_IDLE; 648 ace->id_result = ace->data_result; 649 while (ace->id_req_count) { 650 complete(&ace->id_completion); 651 ace->id_req_count--; 652 } 653 break; 654 655 case ACE_FSM_STATE_REQ_PREPARE: 656 req = ace_get_next_request(ace->queue); 657 if (!req) { 658 ace->fsm_state = ACE_FSM_STATE_IDLE; 659 break; 660 } 661 662 /* Okay, it's a data request, set it up for transfer */ 663 dev_dbg(ace->dev, 664 "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n", 665 (unsigned long long)blk_rq_pos(req), 666 blk_rq_sectors(req), blk_rq_cur_sectors(req), 667 rq_data_dir(req)); 668 669 ace->req = req; 670 ace->data_ptr = bio_data(req->bio); 671 ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR; 672 ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF); 673 674 count = blk_rq_sectors(req); 675 if (rq_data_dir(req)) { 676 /* Kick off write request */ 677 dev_dbg(ace->dev, "write data\n"); 678 ace->fsm_task = ACE_TASK_WRITE; 679 ace_out(ace, ACE_SECCNTCMD, 680 count | ACE_SECCNTCMD_WRITE_DATA); 681 } else { 682 /* Kick off read request */ 683 dev_dbg(ace->dev, "read data\n"); 684 ace->fsm_task = ACE_TASK_READ; 685 ace_out(ace, ACE_SECCNTCMD, 686 count | ACE_SECCNTCMD_READ_DATA); 687 } 688 689 /* As per datasheet, put config controller in reset */ 690 val = ace_in(ace, ACE_CTRL); 691 ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); 692 693 /* Move to the transfer state. The systemace will raise 694 * an interrupt once there is something to do 695 */ 696 ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER; 697 if (ace->fsm_task == ACE_TASK_READ) 698 ace_fsm_yieldirq(ace); /* wait for data ready */ 699 break; 700 701 case ACE_FSM_STATE_REQ_TRANSFER: 702 /* Check that the sysace is ready to receive data */ 703 status = ace_in32(ace, ACE_STATUS); 704 if (status & ACE_STATUS_CFBSY) { 705 dev_dbg(ace->dev, 706 "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n", 707 ace->fsm_task, ace->fsm_iter_num, 708 blk_rq_cur_sectors(ace->req) * 16, 709 ace->data_count, ace->in_irq); 710 ace_fsm_yield(ace); /* need to poll CFBSY bit */ 711 break; 712 } 713 if (!(status & ACE_STATUS_DATABUFRDY)) { 714 dev_dbg(ace->dev, 715 "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n", 716 ace->fsm_task, ace->fsm_iter_num, 717 blk_rq_cur_sectors(ace->req) * 16, 718 ace->data_count, ace->in_irq); 719 ace_fsm_yieldirq(ace); 720 break; 721 } 722 723 /* Transfer the next buffer */ 724 if (ace->fsm_task == ACE_TASK_WRITE) 725 ace->reg_ops->dataout(ace); 726 else 727 ace->reg_ops->datain(ace); 728 ace->data_count--; 729 730 /* If there are still buffers to be transfers; jump out here */ 731 if (ace->data_count != 0) { 732 ace_fsm_yieldirq(ace); 733 break; 734 } 735 736 /* bio finished; is there another one? */ 737 if (blk_update_request(ace->req, BLK_STS_OK, 738 blk_rq_cur_bytes(ace->req))) { 739 /* dev_dbg(ace->dev, "next block; h=%u c=%u\n", 740 * blk_rq_sectors(ace->req), 741 * blk_rq_cur_sectors(ace->req)); 742 */ 743 ace->data_ptr = bio_data(ace->req->bio); 744 ace->data_count = blk_rq_cur_sectors(ace->req) * 16; 745 ace_fsm_yieldirq(ace); 746 break; 747 } 748 749 ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE; 750 break; 751 752 case ACE_FSM_STATE_REQ_COMPLETE: 753 ace->req = NULL; 754 755 /* Finished request; go to idle state */ 756 ace->fsm_state = ACE_FSM_STATE_IDLE; 757 break; 758 759 default: 760 ace->fsm_state = ACE_FSM_STATE_IDLE; 761 break; 762 } 763} 764 765static void ace_fsm_tasklet(unsigned long data) 766{ 767 struct ace_device *ace = (void *)data; 768 unsigned long flags; 769 770 spin_lock_irqsave(&ace->lock, flags); 771 772 /* Loop over state machine until told to stop */ 773 ace->fsm_continue_flag = 1; 774 while (ace->fsm_continue_flag) 775 ace_fsm_dostate(ace); 776 777 spin_unlock_irqrestore(&ace->lock, flags); 778} 779 780static void ace_stall_timer(struct timer_list *t) 781{ 782 struct ace_device *ace = from_timer(ace, t, stall_timer); 783 unsigned long flags; 784 785 dev_warn(ace->dev, 786 "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n", 787 ace->fsm_state, ace->fsm_task, ace->fsm_iter_num, 788 ace->data_count); 789 spin_lock_irqsave(&ace->lock, flags); 790 791 /* Rearm the stall timer *before* entering FSM (which may then 792 * delete the timer) */ 793 mod_timer(&ace->stall_timer, jiffies + HZ); 794 795 /* Loop over state machine until told to stop */ 796 ace->fsm_continue_flag = 1; 797 while (ace->fsm_continue_flag) 798 ace_fsm_dostate(ace); 799 800 spin_unlock_irqrestore(&ace->lock, flags); 801} 802 803/* --------------------------------------------------------------------- 804 * Interrupt handling routines 805 */ 806static int ace_interrupt_checkstate(struct ace_device *ace) 807{ 808 u32 sreg = ace_in32(ace, ACE_STATUS); 809 u16 creg = ace_in(ace, ACE_CTRL); 810 811 /* Check for error occurrence */ 812 if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) && 813 (creg & ACE_CTRL_ERRORIRQ)) { 814 dev_err(ace->dev, "transfer failure\n"); 815 ace_dump_regs(ace); 816 return -EIO; 817 } 818 819 return 0; 820} 821 822static irqreturn_t ace_interrupt(int irq, void *dev_id) 823{ 824 u16 creg; 825 struct ace_device *ace = dev_id; 826 827 /* be safe and get the lock */ 828 spin_lock(&ace->lock); 829 ace->in_irq = 1; 830 831 /* clear the interrupt */ 832 creg = ace_in(ace, ACE_CTRL); 833 ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ); 834 ace_out(ace, ACE_CTRL, creg); 835 836 /* check for IO failures */ 837 if (ace_interrupt_checkstate(ace)) 838 ace->data_result = -EIO; 839 840 if (ace->fsm_task == 0) { 841 dev_err(ace->dev, 842 "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n", 843 ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL), 844 ace_in(ace, ACE_SECCNTCMD)); 845 dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n", 846 ace->fsm_task, ace->fsm_state, ace->data_count); 847 } 848 849 /* Loop over state machine until told to stop */ 850 ace->fsm_continue_flag = 1; 851 while (ace->fsm_continue_flag) 852 ace_fsm_dostate(ace); 853 854 /* done with interrupt; drop the lock */ 855 ace->in_irq = 0; 856 spin_unlock(&ace->lock); 857 858 return IRQ_HANDLED; 859} 860 861/* --------------------------------------------------------------------- 862 * Block ops 863 */ 864static blk_status_t ace_queue_rq(struct blk_mq_hw_ctx *hctx, 865 const struct blk_mq_queue_data *bd) 866{ 867 struct ace_device *ace = hctx->queue->queuedata; 868 struct request *req = bd->rq; 869 870 if (blk_rq_is_passthrough(req)) { 871 blk_mq_start_request(req); 872 return BLK_STS_IOERR; 873 } 874 875 spin_lock_irq(&ace->lock); 876 list_add_tail(&req->queuelist, &ace->rq_list); 877 spin_unlock_irq(&ace->lock); 878 879 tasklet_schedule(&ace->fsm_tasklet); 880 return BLK_STS_OK; 881} 882 883static unsigned int ace_check_events(struct gendisk *gd, unsigned int clearing) 884{ 885 struct ace_device *ace = gd->private_data; 886 dev_dbg(ace->dev, "ace_check_events(): %i\n", ace->media_change); 887 888 return ace->media_change ? DISK_EVENT_MEDIA_CHANGE : 0; 889} 890 891static int ace_revalidate_disk(struct gendisk *gd) 892{ 893 struct ace_device *ace = gd->private_data; 894 unsigned long flags; 895 896 dev_dbg(ace->dev, "ace_revalidate_disk()\n"); 897 898 if (ace->media_change) { 899 dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n"); 900 901 spin_lock_irqsave(&ace->lock, flags); 902 ace->id_req_count++; 903 spin_unlock_irqrestore(&ace->lock, flags); 904 905 tasklet_schedule(&ace->fsm_tasklet); 906 wait_for_completion(&ace->id_completion); 907 } 908 909 dev_dbg(ace->dev, "revalidate complete\n"); 910 return ace->id_result; 911} 912 913static int ace_open(struct block_device *bdev, fmode_t mode) 914{ 915 struct ace_device *ace = bdev->bd_disk->private_data; 916 unsigned long flags; 917 918 dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1); 919 920 mutex_lock(&xsysace_mutex); 921 spin_lock_irqsave(&ace->lock, flags); 922 ace->users++; 923 spin_unlock_irqrestore(&ace->lock, flags); 924 925 check_disk_change(bdev); 926 mutex_unlock(&xsysace_mutex); 927 928 return 0; 929} 930 931static void ace_release(struct gendisk *disk, fmode_t mode) 932{ 933 struct ace_device *ace = disk->private_data; 934 unsigned long flags; 935 u16 val; 936 937 dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1); 938 939 mutex_lock(&xsysace_mutex); 940 spin_lock_irqsave(&ace->lock, flags); 941 ace->users--; 942 if (ace->users == 0) { 943 val = ace_in(ace, ACE_CTRL); 944 ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ); 945 } 946 spin_unlock_irqrestore(&ace->lock, flags); 947 mutex_unlock(&xsysace_mutex); 948} 949 950static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo) 951{ 952 struct ace_device *ace = bdev->bd_disk->private_data; 953 u16 *cf_id = ace->cf_id; 954 955 dev_dbg(ace->dev, "ace_getgeo()\n"); 956 957 geo->heads = cf_id[ATA_ID_HEADS]; 958 geo->sectors = cf_id[ATA_ID_SECTORS]; 959 geo->cylinders = cf_id[ATA_ID_CYLS]; 960 961 return 0; 962} 963 964static const struct block_device_operations ace_fops = { 965 .owner = THIS_MODULE, 966 .open = ace_open, 967 .release = ace_release, 968 .check_events = ace_check_events, 969 .revalidate_disk = ace_revalidate_disk, 970 .getgeo = ace_getgeo, 971}; 972 973static const struct blk_mq_ops ace_mq_ops = { 974 .queue_rq = ace_queue_rq, 975}; 976 977/* -------------------------------------------------------------------- 978 * SystemACE device setup/teardown code 979 */ 980static int ace_setup(struct ace_device *ace) 981{ 982 u16 version; 983 u16 val; 984 int rc; 985 986 dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); 987 dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n", 988 (unsigned long long)ace->physaddr, ace->irq); 989 990 spin_lock_init(&ace->lock); 991 init_completion(&ace->id_completion); 992 INIT_LIST_HEAD(&ace->rq_list); 993 994 /* 995 * Map the device 996 */ 997 ace->baseaddr = ioremap(ace->physaddr, 0x80); 998 if (!ace->baseaddr) 999 goto err_ioremap; 1000 1001 /* 1002 * Initialize the state machine tasklet and stall timer 1003 */ 1004 tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace); 1005 timer_setup(&ace->stall_timer, ace_stall_timer, 0); 1006 1007 /* 1008 * Initialize the request queue 1009 */ 1010 ace->queue = blk_mq_init_sq_queue(&ace->tag_set, &ace_mq_ops, 2, 1011 BLK_MQ_F_SHOULD_MERGE); 1012 if (IS_ERR(ace->queue)) { 1013 rc = PTR_ERR(ace->queue); 1014 ace->queue = NULL; 1015 goto err_blk_initq; 1016 } 1017 ace->queue->queuedata = ace; 1018 1019 blk_queue_logical_block_size(ace->queue, 512); 1020 blk_queue_bounce_limit(ace->queue, BLK_BOUNCE_HIGH); 1021 1022 /* 1023 * Allocate and initialize GD structure 1024 */ 1025 ace->gd = alloc_disk(ACE_NUM_MINORS); 1026 if (!ace->gd) 1027 goto err_alloc_disk; 1028 1029 ace->gd->major = ace_major; 1030 ace->gd->first_minor = ace->id * ACE_NUM_MINORS; 1031 ace->gd->fops = &ace_fops; 1032 ace->gd->events = DISK_EVENT_MEDIA_CHANGE; 1033 ace->gd->queue = ace->queue; 1034 ace->gd->private_data = ace; 1035 snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a'); 1036 1037 /* set bus width */ 1038 if (ace->bus_width == ACE_BUS_WIDTH_16) { 1039 /* 0x0101 should work regardless of endianess */ 1040 ace_out_le16(ace, ACE_BUSMODE, 0x0101); 1041 1042 /* read it back to determine endianess */ 1043 if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001) 1044 ace->reg_ops = &ace_reg_le16_ops; 1045 else 1046 ace->reg_ops = &ace_reg_be16_ops; 1047 } else { 1048 ace_out_8(ace, ACE_BUSMODE, 0x00); 1049 ace->reg_ops = &ace_reg_8_ops; 1050 } 1051 1052 /* Make sure version register is sane */ 1053 version = ace_in(ace, ACE_VERSION); 1054 if ((version == 0) || (version == 0xFFFF)) 1055 goto err_read; 1056 1057 /* Put sysace in a sane state by clearing most control reg bits */ 1058 ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE | 1059 ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ); 1060 1061 /* Now we can hook up the irq handler */ 1062 if (ace->irq) { 1063 rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace); 1064 if (rc) { 1065 /* Failure - fall back to polled mode */ 1066 dev_err(ace->dev, "request_irq failed\n"); 1067 ace->irq = 0; 1068 } 1069 } 1070 1071 /* Enable interrupts */ 1072 val = ace_in(ace, ACE_CTRL); 1073 val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ; 1074 ace_out(ace, ACE_CTRL, val); 1075 1076 /* Print the identification */ 1077 dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", 1078 (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); 1079 dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n", 1080 (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq); 1081 1082 ace->media_change = 1; 1083 ace_revalidate_disk(ace->gd); 1084 1085 /* Make the sysace device 'live' */ 1086 add_disk(ace->gd); 1087 1088 return 0; 1089 1090err_read: 1091 /* prevent double queue cleanup */ 1092 ace->gd->queue = NULL; 1093 put_disk(ace->gd); 1094err_alloc_disk: 1095 blk_cleanup_queue(ace->queue); 1096 blk_mq_free_tag_set(&ace->tag_set); 1097err_blk_initq: 1098 iounmap(ace->baseaddr); 1099err_ioremap: 1100 dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n", 1101 (unsigned long long) ace->physaddr); 1102 return -ENOMEM; 1103} 1104 1105static void ace_teardown(struct ace_device *ace) 1106{ 1107 if (ace->gd) { 1108 del_gendisk(ace->gd); 1109 put_disk(ace->gd); 1110 } 1111 1112 if (ace->queue) { 1113 blk_cleanup_queue(ace->queue); 1114 blk_mq_free_tag_set(&ace->tag_set); 1115 } 1116 1117 tasklet_kill(&ace->fsm_tasklet); 1118 1119 if (ace->irq) 1120 free_irq(ace->irq, ace); 1121 1122 iounmap(ace->baseaddr); 1123} 1124 1125static int ace_alloc(struct device *dev, int id, resource_size_t physaddr, 1126 int irq, int bus_width) 1127{ 1128 struct ace_device *ace; 1129 int rc; 1130 dev_dbg(dev, "ace_alloc(%p)\n", dev); 1131 1132 if (!physaddr) { 1133 rc = -ENODEV; 1134 goto err_noreg; 1135 } 1136 1137 /* Allocate and initialize the ace device structure */ 1138 ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL); 1139 if (!ace) { 1140 rc = -ENOMEM; 1141 goto err_alloc; 1142 } 1143 1144 ace->dev = dev; 1145 ace->id = id; 1146 ace->physaddr = physaddr; 1147 ace->irq = irq; 1148 ace->bus_width = bus_width; 1149 1150 /* Call the setup code */ 1151 rc = ace_setup(ace); 1152 if (rc) 1153 goto err_setup; 1154 1155 dev_set_drvdata(dev, ace); 1156 return 0; 1157 1158err_setup: 1159 dev_set_drvdata(dev, NULL); 1160 kfree(ace); 1161err_alloc: 1162err_noreg: 1163 dev_err(dev, "could not initialize device, err=%i\n", rc); 1164 return rc; 1165} 1166 1167static void ace_free(struct device *dev) 1168{ 1169 struct ace_device *ace = dev_get_drvdata(dev); 1170 dev_dbg(dev, "ace_free(%p)\n", dev); 1171 1172 if (ace) { 1173 ace_teardown(ace); 1174 dev_set_drvdata(dev, NULL); 1175 kfree(ace); 1176 } 1177} 1178 1179/* --------------------------------------------------------------------- 1180 * Platform Bus Support 1181 */ 1182 1183static int ace_probe(struct platform_device *dev) 1184{ 1185 resource_size_t physaddr = 0; 1186 int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ 1187 u32 id = dev->id; 1188 int irq = 0; 1189 int i; 1190 1191 dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); 1192 1193 /* device id and bus width */ 1194 if (of_property_read_u32(dev->dev.of_node, "port-number", &id)) 1195 id = 0; 1196 if (of_find_property(dev->dev.of_node, "8-bit", NULL)) 1197 bus_width = ACE_BUS_WIDTH_8; 1198 1199 for (i = 0; i < dev->num_resources; i++) { 1200 if (dev->resource[i].flags & IORESOURCE_MEM) 1201 physaddr = dev->resource[i].start; 1202 if (dev->resource[i].flags & IORESOURCE_IRQ) 1203 irq = dev->resource[i].start; 1204 } 1205 1206 /* Call the bus-independent setup code */ 1207 return ace_alloc(&dev->dev, id, physaddr, irq, bus_width); 1208} 1209 1210/* 1211 * Platform bus remove() method 1212 */ 1213static int ace_remove(struct platform_device *dev) 1214{ 1215 ace_free(&dev->dev); 1216 return 0; 1217} 1218 1219#if defined(CONFIG_OF) 1220/* Match table for of_platform binding */ 1221static const struct of_device_id ace_of_match[] = { 1222 { .compatible = "xlnx,opb-sysace-1.00.b", }, 1223 { .compatible = "xlnx,opb-sysace-1.00.c", }, 1224 { .compatible = "xlnx,xps-sysace-1.00.a", }, 1225 { .compatible = "xlnx,sysace", }, 1226 {}, 1227}; 1228MODULE_DEVICE_TABLE(of, ace_of_match); 1229#else /* CONFIG_OF */ 1230#define ace_of_match NULL 1231#endif /* CONFIG_OF */ 1232 1233static struct platform_driver ace_platform_driver = { 1234 .probe = ace_probe, 1235 .remove = ace_remove, 1236 .driver = { 1237 .name = "xsysace", 1238 .of_match_table = ace_of_match, 1239 }, 1240}; 1241 1242/* --------------------------------------------------------------------- 1243 * Module init/exit routines 1244 */ 1245static int __init ace_init(void) 1246{ 1247 int rc; 1248 1249 ace_major = register_blkdev(ace_major, "xsysace"); 1250 if (ace_major <= 0) { 1251 rc = -ENOMEM; 1252 goto err_blk; 1253 } 1254 1255 rc = platform_driver_register(&ace_platform_driver); 1256 if (rc) 1257 goto err_plat; 1258 1259 pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major); 1260 return 0; 1261 1262err_plat: 1263 unregister_blkdev(ace_major, "xsysace"); 1264err_blk: 1265 printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc); 1266 return rc; 1267} 1268module_init(ace_init); 1269 1270static void __exit ace_exit(void) 1271{ 1272 pr_debug("Unregistering Xilinx SystemACE driver\n"); 1273 platform_driver_unregister(&ace_platform_driver); 1274 unregister_blkdev(ace_major, "xsysace"); 1275} 1276module_exit(ace_exit);