at v5.2-rc3 5.3 kB view raw
1/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ 2/* 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * Copyright(c) 2018 Intel Corporation. All rights reserved. 7 */ 8 9#ifndef __INCLUDE_SOUND_SOF_HEADER_H__ 10#define __INCLUDE_SOUND_SOF_HEADER_H__ 11 12#include <uapi/sound/sof/abi.h> 13 14/** \addtogroup sof_uapi uAPI 15 * SOF uAPI specification. 16 * @{ 17 */ 18 19/* 20 * IPC messages have a prefixed 32 bit identifier made up as follows :- 21 * 22 * 0xGCCCNNNN where 23 * G is global cmd type (4 bits) 24 * C is command type (12 bits) 25 * I is the ID number (16 bits) - monotonic and overflows 26 * 27 * This is sent at the start of the IPM message in the mailbox. Messages should 28 * not be sent in the doorbell (special exceptions for firmware . 29 */ 30 31/* Global Message - Generic */ 32#define SOF_GLB_TYPE_SHIFT 28 33#define SOF_GLB_TYPE_MASK (0xf << SOF_GLB_TYPE_SHIFT) 34#define SOF_GLB_TYPE(x) ((x) << SOF_GLB_TYPE_SHIFT) 35 36/* Command Message - Generic */ 37#define SOF_CMD_TYPE_SHIFT 16 38#define SOF_CMD_TYPE_MASK (0xfff << SOF_CMD_TYPE_SHIFT) 39#define SOF_CMD_TYPE(x) ((x) << SOF_CMD_TYPE_SHIFT) 40 41/* Global Message Types */ 42#define SOF_IPC_GLB_REPLY SOF_GLB_TYPE(0x1U) 43#define SOF_IPC_GLB_COMPOUND SOF_GLB_TYPE(0x2U) 44#define SOF_IPC_GLB_TPLG_MSG SOF_GLB_TYPE(0x3U) 45#define SOF_IPC_GLB_PM_MSG SOF_GLB_TYPE(0x4U) 46#define SOF_IPC_GLB_COMP_MSG SOF_GLB_TYPE(0x5U) 47#define SOF_IPC_GLB_STREAM_MSG SOF_GLB_TYPE(0x6U) 48#define SOF_IPC_FW_READY SOF_GLB_TYPE(0x7U) 49#define SOF_IPC_GLB_DAI_MSG SOF_GLB_TYPE(0x8U) 50#define SOF_IPC_GLB_TRACE_MSG SOF_GLB_TYPE(0x9U) 51 52/* 53 * DSP Command Message Types 54 */ 55 56/* topology */ 57#define SOF_IPC_TPLG_COMP_NEW SOF_CMD_TYPE(0x001) 58#define SOF_IPC_TPLG_COMP_FREE SOF_CMD_TYPE(0x002) 59#define SOF_IPC_TPLG_COMP_CONNECT SOF_CMD_TYPE(0x003) 60#define SOF_IPC_TPLG_PIPE_NEW SOF_CMD_TYPE(0x010) 61#define SOF_IPC_TPLG_PIPE_FREE SOF_CMD_TYPE(0x011) 62#define SOF_IPC_TPLG_PIPE_CONNECT SOF_CMD_TYPE(0x012) 63#define SOF_IPC_TPLG_PIPE_COMPLETE SOF_CMD_TYPE(0x013) 64#define SOF_IPC_TPLG_BUFFER_NEW SOF_CMD_TYPE(0x020) 65#define SOF_IPC_TPLG_BUFFER_FREE SOF_CMD_TYPE(0x021) 66 67/* PM */ 68#define SOF_IPC_PM_CTX_SAVE SOF_CMD_TYPE(0x001) 69#define SOF_IPC_PM_CTX_RESTORE SOF_CMD_TYPE(0x002) 70#define SOF_IPC_PM_CTX_SIZE SOF_CMD_TYPE(0x003) 71#define SOF_IPC_PM_CLK_SET SOF_CMD_TYPE(0x004) 72#define SOF_IPC_PM_CLK_GET SOF_CMD_TYPE(0x005) 73#define SOF_IPC_PM_CLK_REQ SOF_CMD_TYPE(0x006) 74#define SOF_IPC_PM_CORE_ENABLE SOF_CMD_TYPE(0x007) 75 76/* component runtime config - multiple different types */ 77#define SOF_IPC_COMP_SET_VALUE SOF_CMD_TYPE(0x001) 78#define SOF_IPC_COMP_GET_VALUE SOF_CMD_TYPE(0x002) 79#define SOF_IPC_COMP_SET_DATA SOF_CMD_TYPE(0x003) 80#define SOF_IPC_COMP_GET_DATA SOF_CMD_TYPE(0x004) 81 82/* DAI messages */ 83#define SOF_IPC_DAI_CONFIG SOF_CMD_TYPE(0x001) 84#define SOF_IPC_DAI_LOOPBACK SOF_CMD_TYPE(0x002) 85 86/* stream */ 87#define SOF_IPC_STREAM_PCM_PARAMS SOF_CMD_TYPE(0x001) 88#define SOF_IPC_STREAM_PCM_PARAMS_REPLY SOF_CMD_TYPE(0x002) 89#define SOF_IPC_STREAM_PCM_FREE SOF_CMD_TYPE(0x003) 90#define SOF_IPC_STREAM_TRIG_START SOF_CMD_TYPE(0x004) 91#define SOF_IPC_STREAM_TRIG_STOP SOF_CMD_TYPE(0x005) 92#define SOF_IPC_STREAM_TRIG_PAUSE SOF_CMD_TYPE(0x006) 93#define SOF_IPC_STREAM_TRIG_RELEASE SOF_CMD_TYPE(0x007) 94#define SOF_IPC_STREAM_TRIG_DRAIN SOF_CMD_TYPE(0x008) 95#define SOF_IPC_STREAM_TRIG_XRUN SOF_CMD_TYPE(0x009) 96#define SOF_IPC_STREAM_POSITION SOF_CMD_TYPE(0x00a) 97#define SOF_IPC_STREAM_VORBIS_PARAMS SOF_CMD_TYPE(0x010) 98#define SOF_IPC_STREAM_VORBIS_FREE SOF_CMD_TYPE(0x011) 99 100/* trace and debug */ 101#define SOF_IPC_TRACE_DMA_PARAMS SOF_CMD_TYPE(0x001) 102#define SOF_IPC_TRACE_DMA_POSITION SOF_CMD_TYPE(0x002) 103 104/* Get message component id */ 105#define SOF_IPC_MESSAGE_ID(x) ((x) & 0xffff) 106 107/* maximum message size for mailbox Tx/Rx */ 108#define SOF_IPC_MSG_MAX_SIZE 384 109 110/* 111 * Structure Header - Header for all IPC structures except command structs. 112 * The size can be greater than the structure size and that means there is 113 * extended bespoke data beyond the end of the structure including variable 114 * arrays. 115 */ 116 117struct sof_ipc_hdr { 118 uint32_t size; /**< size of structure */ 119} __packed; 120 121/* 122 * Command Header - Header for all IPC commands. Identifies IPC message. 123 * The size can be greater than the structure size and that means there is 124 * extended bespoke data beyond the end of the structure including variable 125 * arrays. 126 */ 127 128struct sof_ipc_cmd_hdr { 129 uint32_t size; /**< size of structure */ 130 uint32_t cmd; /**< SOF_IPC_GLB_ + cmd */ 131} __packed; 132 133/* 134 * Generic reply message. Some commands override this with their own reply 135 * types that must include this at start. 136 */ 137struct sof_ipc_reply { 138 struct sof_ipc_cmd_hdr hdr; 139 int32_t error; /**< negative error numbers */ 140} __packed; 141 142/* 143 * Compound commands - SOF_IPC_GLB_COMPOUND. 144 * 145 * Compound commands are sent to the DSP as a single IPC operation. The 146 * commands are split into blocks and each block has a header. This header 147 * identifies the command type and the number of commands before the next 148 * header. 149 */ 150 151struct sof_ipc_compound_hdr { 152 struct sof_ipc_cmd_hdr hdr; 153 uint32_t count; /**< count of 0 means end of compound sequence */ 154} __packed; 155 156/** @}*/ 157 158#endif