Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * AMD64 class Memory Controller kernel module
3 *
4 * Copyright (c) 2009 SoftwareBitMaker.
5 * Copyright (c) 2009-15 Advanced Micro Devices, Inc.
6 *
7 * This file may be distributed under the terms of the
8 * GNU General Public License.
9 */
10
11#include <linux/module.h>
12#include <linux/ctype.h>
13#include <linux/init.h>
14#include <linux/pci.h>
15#include <linux/pci_ids.h>
16#include <linux/slab.h>
17#include <linux/mmzone.h>
18#include <linux/edac.h>
19#include <asm/cpu_device_id.h>
20#include <asm/msr.h>
21#include "edac_module.h"
22#include "mce_amd.h"
23
24#define amd64_info(fmt, arg...) \
25 edac_printk(KERN_INFO, "amd64", fmt, ##arg)
26
27#define amd64_warn(fmt, arg...) \
28 edac_printk(KERN_WARNING, "amd64", "Warning: " fmt, ##arg)
29
30#define amd64_err(fmt, arg...) \
31 edac_printk(KERN_ERR, "amd64", "Error: " fmt, ##arg)
32
33#define amd64_mc_warn(mci, fmt, arg...) \
34 edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
35
36#define amd64_mc_err(mci, fmt, arg...) \
37 edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
38
39/*
40 * Throughout the comments in this code, the following terms are used:
41 *
42 * SysAddr, DramAddr, and InputAddr
43 *
44 * These terms come directly from the amd64 documentation
45 * (AMD publication #26094). They are defined as follows:
46 *
47 * SysAddr:
48 * This is a physical address generated by a CPU core or a device
49 * doing DMA. If generated by a CPU core, a SysAddr is the result of
50 * a virtual to physical address translation by the CPU core's address
51 * translation mechanism (MMU).
52 *
53 * DramAddr:
54 * A DramAddr is derived from a SysAddr by subtracting an offset that
55 * depends on which node the SysAddr maps to and whether the SysAddr
56 * is within a range affected by memory hoisting. The DRAM Base
57 * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
58 * determine which node a SysAddr maps to.
59 *
60 * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
61 * is within the range of addresses specified by this register, then
62 * a value x from the DHAR is subtracted from the SysAddr to produce a
63 * DramAddr. Here, x represents the base address for the node that
64 * the SysAddr maps to plus an offset due to memory hoisting. See
65 * section 3.4.8 and the comments in amd64_get_dram_hole_info() and
66 * sys_addr_to_dram_addr() below for more information.
67 *
68 * If the SysAddr is not affected by the DHAR then a value y is
69 * subtracted from the SysAddr to produce a DramAddr. Here, y is the
70 * base address for the node that the SysAddr maps to. See section
71 * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
72 * information.
73 *
74 * InputAddr:
75 * A DramAddr is translated to an InputAddr before being passed to the
76 * memory controller for the node that the DramAddr is associated
77 * with. The memory controller then maps the InputAddr to a csrow.
78 * If node interleaving is not in use, then the InputAddr has the same
79 * value as the DramAddr. Otherwise, the InputAddr is produced by
80 * discarding the bits used for node interleaving from the DramAddr.
81 * See section 3.4.4 for more information.
82 *
83 * The memory controller for a given node uses its DRAM CS Base and
84 * DRAM CS Mask registers to map an InputAddr to a csrow. See
85 * sections 3.5.4 and 3.5.5 for more information.
86 */
87
88#define EDAC_AMD64_VERSION "3.5.0"
89#define EDAC_MOD_STR "amd64_edac"
90
91/* Extended Model from CPUID, for CPU Revision numbers */
92#define K8_REV_D 1
93#define K8_REV_E 2
94#define K8_REV_F 4
95
96/* Hardware limit on ChipSelect rows per MC and processors per system */
97#define NUM_CHIPSELECTS 8
98#define DRAM_RANGES 8
99
100#define ON true
101#define OFF false
102
103/*
104 * PCI-defined configuration space registers
105 */
106#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
107#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
108#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
109#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
110#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
111#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
112#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
113#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
114#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
115#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
116#define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
117#define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
118#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 0x15e8
119#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 0x15ee
120#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 0x1490
121#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 0x1496
122
123/*
124 * Function 1 - Address Map
125 */
126#define DRAM_BASE_LO 0x40
127#define DRAM_LIMIT_LO 0x44
128
129/*
130 * F15 M30h D18F1x2[1C:00]
131 */
132#define DRAM_CONT_BASE 0x200
133#define DRAM_CONT_LIMIT 0x204
134
135/*
136 * F15 M30h D18F1x2[4C:40]
137 */
138#define DRAM_CONT_HIGH_OFF 0x240
139
140#define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3))
141#define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
142#define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7))
143
144#define DHAR 0xf0
145#define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1))
146#define dhar_base(pvt) ((pvt)->dhar & 0xff000000)
147#define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16)
148
149 /* NOTE: Extra mask bit vs K8 */
150#define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16)
151
152#define DCT_CFG_SEL 0x10C
153
154#define DRAM_LOCAL_NODE_BASE 0x120
155#define DRAM_LOCAL_NODE_LIM 0x124
156
157#define DRAM_BASE_HI 0x140
158#define DRAM_LIMIT_HI 0x144
159
160
161/*
162 * Function 2 - DRAM controller
163 */
164#define DCSB0 0x40
165#define DCSB1 0x140
166#define DCSB_CS_ENABLE BIT(0)
167
168#define DCSM0 0x60
169#define DCSM1 0x160
170
171#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
172
173#define DRAM_CONTROL 0x78
174
175#define DBAM0 0x80
176#define DBAM1 0x180
177
178/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
179#define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF)
180
181#define DBAM_MAX_VALUE 11
182
183#define DCLR0 0x90
184#define DCLR1 0x190
185#define REVE_WIDTH_128 BIT(16)
186#define WIDTH_128 BIT(11)
187
188#define DCHR0 0x94
189#define DCHR1 0x194
190#define DDR3_MODE BIT(8)
191
192#define DCT_SEL_LO 0x110
193#define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0))
194#define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2))
195
196#define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
197
198#define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5))
199#define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10))
200
201#define SWAP_INTLV_REG 0x10c
202
203#define DCT_SEL_HI 0x114
204
205#define F15H_M60H_SCRCTRL 0x1C8
206#define F17H_SCR_BASE_ADDR 0x48
207#define F17H_SCR_LIMIT_ADDR 0x4C
208
209/*
210 * Function 3 - Misc Control
211 */
212#define NBCTL 0x40
213
214#define NBCFG 0x44
215#define NBCFG_CHIPKILL BIT(23)
216#define NBCFG_ECC_ENABLE BIT(22)
217
218/* F3x48: NBSL */
219#define F10_NBSL_EXT_ERR_ECC 0x8
220#define NBSL_PP_OBS 0x2
221
222#define SCRCTRL 0x58
223
224#define F10_ONLINE_SPARE 0xB0
225#define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
226#define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
227
228#define F10_NB_ARRAY_ADDR 0xB8
229#define F10_NB_ARRAY_DRAM BIT(31)
230
231/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */
232#define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1)
233
234#define F10_NB_ARRAY_DATA 0xBC
235#define F10_NB_ARR_ECC_WR_REQ BIT(17)
236#define SET_NB_DRAM_INJECTION_WRITE(inj) \
237 (BIT(((inj.word) & 0xF) + 20) | \
238 F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
239#define SET_NB_DRAM_INJECTION_READ(inj) \
240 (BIT(((inj.word) & 0xF) + 20) | \
241 BIT(16) | inj.bit_map)
242
243
244#define NBCAP 0xE8
245#define NBCAP_CHIPKILL BIT(4)
246#define NBCAP_SECDED BIT(3)
247#define NBCAP_DCT_DUAL BIT(0)
248
249#define EXT_NB_MCA_CFG 0x180
250
251/* MSRs */
252#define MSR_MCGCTL_NBE BIT(4)
253
254/* F17h */
255
256/* F0: */
257#define DF_DHAR 0x104
258
259/* UMC CH register offsets */
260#define UMCCH_BASE_ADDR 0x0
261#define UMCCH_ADDR_MASK 0x20
262#define UMCCH_ADDR_CFG 0x30
263#define UMCCH_DIMM_CFG 0x80
264#define UMCCH_UMC_CFG 0x100
265#define UMCCH_SDP_CTRL 0x104
266#define UMCCH_ECC_CTRL 0x14C
267#define UMCCH_ECC_BAD_SYMBOL 0xD90
268#define UMCCH_UMC_CAP 0xDF0
269#define UMCCH_UMC_CAP_HI 0xDF4
270
271/* UMC CH bitfields */
272#define UMC_ECC_CHIPKILL_CAP BIT(31)
273#define UMC_ECC_ENABLED BIT(30)
274
275#define UMC_SDP_INIT BIT(31)
276
277enum amd_families {
278 K8_CPUS = 0,
279 F10_CPUS,
280 F15_CPUS,
281 F15_M30H_CPUS,
282 F15_M60H_CPUS,
283 F16_CPUS,
284 F16_M30H_CPUS,
285 F17_CPUS,
286 F17_M10H_CPUS,
287 F17_M30H_CPUS,
288 NUM_FAMILIES,
289};
290
291/* Error injection control structure */
292struct error_injection {
293 u32 section;
294 u32 word;
295 u32 bit_map;
296};
297
298/* low and high part of PCI config space regs */
299struct reg_pair {
300 u32 lo, hi;
301};
302
303/*
304 * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
305 */
306struct dram_range {
307 struct reg_pair base;
308 struct reg_pair lim;
309};
310
311/* A DCT chip selects collection */
312struct chip_select {
313 u32 csbases[NUM_CHIPSELECTS];
314 u8 b_cnt;
315
316 u32 csmasks[NUM_CHIPSELECTS];
317 u8 m_cnt;
318};
319
320struct amd64_umc {
321 u32 dimm_cfg; /* DIMM Configuration reg */
322 u32 umc_cfg; /* Configuration reg */
323 u32 sdp_ctrl; /* SDP Control reg */
324 u32 ecc_ctrl; /* DRAM ECC Control reg */
325 u32 umc_cap_hi; /* Capabilities High reg */
326};
327
328struct amd64_pvt {
329 struct low_ops *ops;
330
331 /* pci_device handles which we utilize */
332 struct pci_dev *F0, *F1, *F2, *F3, *F6;
333
334 u16 mc_node_id; /* MC index of this MC node */
335 u8 fam; /* CPU family */
336 u8 model; /* ... model */
337 u8 stepping; /* ... stepping */
338
339 int ext_model; /* extended model value of this node */
340 int channel_count;
341
342 /* Raw registers */
343 u32 dclr0; /* DRAM Configuration Low DCT0 reg */
344 u32 dclr1; /* DRAM Configuration Low DCT1 reg */
345 u32 dchr0; /* DRAM Configuration High DCT0 reg */
346 u32 dchr1; /* DRAM Configuration High DCT1 reg */
347 u32 nbcap; /* North Bridge Capabilities */
348 u32 nbcfg; /* F10 North Bridge Configuration */
349 u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */
350 u32 dhar; /* DRAM Hoist reg */
351 u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */
352 u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
353
354 /* one for each DCT */
355 struct chip_select csels[2];
356
357 /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
358 struct dram_range ranges[DRAM_RANGES];
359
360 u64 top_mem; /* top of memory below 4GB */
361 u64 top_mem2; /* top of memory above 4GB */
362
363 u32 dct_sel_lo; /* DRAM Controller Select Low */
364 u32 dct_sel_hi; /* DRAM Controller Select High */
365 u32 online_spare; /* On-Line spare Reg */
366
367 /* x4, x8, or x16 syndromes in use */
368 u8 ecc_sym_sz;
369
370 /* place to store error injection parameters prior to issue */
371 struct error_injection injection;
372
373 /* cache the dram_type */
374 enum mem_type dram_type;
375
376 struct amd64_umc *umc; /* UMC registers */
377};
378
379enum err_codes {
380 DECODE_OK = 0,
381 ERR_NODE = -1,
382 ERR_CSROW = -2,
383 ERR_CHANNEL = -3,
384 ERR_SYND = -4,
385 ERR_NORM_ADDR = -5,
386};
387
388struct err_info {
389 int err_code;
390 struct mem_ctl_info *src_mci;
391 int csrow;
392 int channel;
393 u16 syndrome;
394 u32 page;
395 u32 offset;
396};
397
398static inline u32 get_umc_base(u8 channel)
399{
400 /* chY: 0xY50000 */
401 return 0x50000 + (channel << 20);
402}
403
404static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
405{
406 u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
407
408 if (boot_cpu_data.x86 == 0xf)
409 return addr;
410
411 return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
412}
413
414static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
415{
416 u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
417
418 if (boot_cpu_data.x86 == 0xf)
419 return lim;
420
421 return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
422}
423
424static inline u16 extract_syndrome(u64 status)
425{
426 return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
427}
428
429static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
430{
431 if (pvt->fam == 0x15 && pvt->model >= 0x30)
432 return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
433 ((pvt->dct_sel_lo >> 6) & 0x3);
434
435 return ((pvt)->dct_sel_lo >> 6) & 0x3;
436}
437/*
438 * per-node ECC settings descriptor
439 */
440struct ecc_settings {
441 u32 old_nbctl;
442 bool nbctl_valid;
443
444 struct flags {
445 unsigned long nb_mce_enable:1;
446 unsigned long nb_ecc_prev:1;
447 } flags;
448};
449
450#ifdef CONFIG_EDAC_DEBUG
451extern const struct attribute_group amd64_edac_dbg_group;
452#endif
453
454#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
455extern const struct attribute_group amd64_edac_inj_group;
456#endif
457
458/*
459 * Each of the PCI Device IDs types have their own set of hardware accessor
460 * functions and per device encoding/decoding logic.
461 */
462struct low_ops {
463 int (*early_channel_count) (struct amd64_pvt *pvt);
464 void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
465 struct err_info *);
466 int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
467 unsigned cs_mode, int cs_mask_nr);
468};
469
470struct amd64_family_type {
471 const char *ctl_name;
472 u16 f0_id, f1_id, f2_id, f6_id;
473 struct low_ops ops;
474};
475
476int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
477 u32 *val, const char *func);
478int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
479 u32 val, const char *func);
480
481#define amd64_read_pci_cfg(pdev, offset, val) \
482 __amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
483
484#define amd64_write_pci_cfg(pdev, offset, val) \
485 __amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
486
487int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
488 u64 *hole_offset, u64 *hole_size);
489
490#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
491
492/* Injection helpers */
493static inline void disable_caches(void *dummy)
494{
495 write_cr0(read_cr0() | X86_CR0_CD);
496 wbinvd();
497}
498
499static inline void enable_caches(void *dummy)
500{
501 write_cr0(read_cr0() & ~X86_CR0_CD);
502}
503
504static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
505{
506 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
507 u32 tmp;
508 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
509 return (u8) tmp & 0xF;
510 }
511 return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
512}
513
514static inline u8 dhar_valid(struct amd64_pvt *pvt)
515{
516 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
517 u32 tmp;
518 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
519 return (tmp >> 1) & BIT(0);
520 }
521 return (pvt)->dhar & BIT(0);
522}
523
524static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
525{
526 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
527 u32 tmp;
528 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
529 return (tmp >> 11) & 0x1FFF;
530 }
531 return (pvt)->dct_sel_lo & 0xFFFFF800;
532}