tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
4 */
5
6/dts-v1/;
7
8#include "sm6125.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/input/gpio-keys.h>
12
13/ {
14 /* required for bootloader to select correct board */
15 qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
16 qcom,board-id = <34 0>;
17
18 model = "Sony Xperia 10 II";
19 compatible = "sony,pdx201", "qcom,sm6125";
20 chassis-type = "handset";
21
22 chosen {
23 #address-cells = <2>;
24 #size-cells = <2>;
25 ranges;
26
27 framebuffer0: framebuffer@5c000000 {
28 compatible = "simple-framebuffer";
29 reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
30 width = <1080>;
31 height = <2520>;
32 stride = <(1080 * 4)>;
33 format = "a8r8g8b8";
34 };
35 };
36
37 extcon_usb: extcon-usb {
38 compatible = "linux,extcon-usb-gpio";
39 id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
40 };
41
42 gpio-keys {
43 status = "okay";
44 compatible = "gpio-keys";
45 #address-cells = <1>;
46 #size-cells = <0>;
47 autorepeat;
48
49 vol-dn {
50 label = "Volume Down";
51 gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
52 linux,input-type = <1>;
53 linux,code = <KEY_VOLUMEDOWN>;
54 gpio-key,wakeup;
55 debounce-interval = <15>;
56 };
57 };
58
59 reserved_memory {
60 #address-cells = <2>;
61 #size-cells = <2>;
62 debug_mem: memory@ffb00000 {
63 reg = <0x0 0xffb00000 0x0 0xc0000>;
64 no-map;
65 };
66
67 last_log_mem: memory@ffbc0000 {
68 reg = <0x0 0xffbc0000 0x0 0x80000>;
69 no-map;
70 };
71
72 pstore_mem: ramoops@ffc00000 {
73 compatible = "ramoops";
74 reg = <0x0 0xffc40000 0x0 0xc0000>;
75 record-size = <0x1000>;
76 console-size = <0x40000>;
77 msg-size = <0x20000 0x20000>;
78 };
79
80 cmdline_mem: memory@ffd00000 {
81 reg = <0x0 0xffd40000 0x0 0x1000>;
82 no-map;
83 };
84 };
85};
86
87&hsusb_phy1 {
88 status = "okay";
89};
90
91&sdc2_state_off {
92 sd-cd {
93 pins = "gpio98";
94 bias-disable;
95 drive-strength = <2>;
96 };
97};
98
99&sdhc_1 {
100 status = "okay";
101};
102
103&tlmm {
104 gpio-reserved-ranges = <22 2>, <28 6>;
105
106 sdc2_state_on: sdc2-on {
107 clk {
108 pins = "sdc2_clk";
109 bias-disable;
110 drive-strength = <16>;
111 };
112
113 cmd {
114 pins = "sdc2_cmd";
115 bias-pull-up;
116 drive-strength = <10>;
117 };
118
119 data {
120 pins = "sdc2_data";
121 bias-pull-up;
122 drive-strength = <10>;
123 };
124
125 sd-cd {
126 pins = "gpio98";
127 bias-pull-up;
128 drive-strength = <2>;
129 };
130 };
131};
132
133&usb3 {
134 status = "okay";
135};
136
137&usb3_dwc3 {
138 extcon = <&extcon_usb>;
139};