Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2/*
3 * lirc.h - linux infrared remote control header file
4 */
5
6#ifndef _LINUX_LIRC_H
7#define _LINUX_LIRC_H
8
9#include <linux/types.h>
10#include <linux/ioctl.h>
11
12#define PULSE_BIT 0x01000000
13#define PULSE_MASK 0x00FFFFFF
14
15#define LIRC_MODE2_SPACE 0x00000000
16#define LIRC_MODE2_PULSE 0x01000000
17#define LIRC_MODE2_FREQUENCY 0x02000000
18#define LIRC_MODE2_TIMEOUT 0x03000000
19#define LIRC_MODE2_OVERFLOW 0x04000000
20
21#define LIRC_VALUE_MASK 0x00FFFFFF
22#define LIRC_MODE2_MASK 0xFF000000
23
24#define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
25#define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
26#define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
27#define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
28#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW)
29
30#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
31#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
32
33#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
34#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
35#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
36#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
37#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW)
38
39/* used heavily by lirc userspace */
40#define lirc_t int
41
42/*** lirc compatible hardware features ***/
43
44#define LIRC_MODE2SEND(x) (x)
45#define LIRC_SEND2MODE(x) (x)
46#define LIRC_MODE2REC(x) ((x) << 16)
47#define LIRC_REC2MODE(x) ((x) >> 16)
48
49#define LIRC_MODE_RAW 0x00000001
50#define LIRC_MODE_PULSE 0x00000002
51#define LIRC_MODE_MODE2 0x00000004
52#define LIRC_MODE_SCANCODE 0x00000008
53#define LIRC_MODE_LIRCCODE 0x00000010
54
55
56#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW)
57#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE)
58#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2)
59#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
60
61#define LIRC_CAN_SEND_MASK 0x0000003f
62
63#define LIRC_CAN_SET_SEND_CARRIER 0x00000100
64#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200
65#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400
66
67#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW)
68#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE)
69#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2)
70#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE)
71#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
72
73#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
74
75#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
76
77#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
78#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
79#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
80
81#define LIRC_CAN_MEASURE_CARRIER 0x02000000
82#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
83
84#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
85#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
86
87/*** IOCTL commands for lirc driver ***/
88
89#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
90
91#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
92#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
93#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32)
94
95#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32)
96#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32)
97
98/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
99#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32)
100
101#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32)
102#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32)
103/* Note: these can reset the according pulse_width */
104#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32)
105#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32)
106#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32)
107#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32)
108
109/*
110 * when a timeout != 0 is set the driver will send a
111 * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
112 * never sent, timeout is disabled by default
113 */
114#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32)
115
116/* 1 enables, 0 disables timeout reports in MODE2 */
117#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32)
118
119/*
120 * if enabled from the next key press on the driver will send
121 * LIRC_MODE2_FREQUENCY packets
122 */
123#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
124
125/*
126 * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
127 * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
128 */
129#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32)
130
131#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
132
133/*
134 * Return the recording timeout, which is either set by
135 * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
136 */
137#define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32)
138
139/**
140 * struct lirc_scancode - decoded scancode with protocol for use with
141 * LIRC_MODE_SCANCODE
142 *
143 * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
144 * was decoded.
145 * @flags: should be 0 for transmit. When receiving scancodes,
146 * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
147 * depending on the protocol
148 * @rc_proto: see enum rc_proto
149 * @keycode: the translated keycode. Set to 0 for transmit.
150 * @scancode: the scancode received or to be sent
151 */
152struct lirc_scancode {
153 __u64 timestamp;
154 __u16 flags;
155 __u16 rc_proto;
156 __u32 keycode;
157 __u64 scancode;
158};
159
160/* Set if the toggle bit of rc-5 or rc-6 is enabled */
161#define LIRC_SCANCODE_FLAG_TOGGLE 1
162/* Set if this is a nec or sanyo repeat */
163#define LIRC_SCANCODE_FLAG_REPEAT 2
164
165/**
166 * enum rc_proto - the Remote Controller protocol
167 *
168 * @RC_PROTO_UNKNOWN: Protocol not known
169 * @RC_PROTO_OTHER: Protocol known but proprietary
170 * @RC_PROTO_RC5: Philips RC5 protocol
171 * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
172 * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
173 * @RC_PROTO_JVC: JVC protocol
174 * @RC_PROTO_SONY12: Sony 12 bit protocol
175 * @RC_PROTO_SONY15: Sony 15 bit protocol
176 * @RC_PROTO_SONY20: Sony 20 bit protocol
177 * @RC_PROTO_NEC: NEC protocol
178 * @RC_PROTO_NECX: Extended NEC protocol
179 * @RC_PROTO_NEC32: NEC 32 bit protocol
180 * @RC_PROTO_SANYO: Sanyo protocol
181 * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
182 * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
183 * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
184 * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
185 * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
186 * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
187 * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
188 * @RC_PROTO_SHARP: Sharp protocol
189 * @RC_PROTO_XMP: XMP protocol
190 * @RC_PROTO_CEC: CEC protocol
191 * @RC_PROTO_IMON: iMon Pad protocol
192 * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
193 * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
194 * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
195 * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol
196 * @RC_PROTO_MAX: Maximum value of enum rc_proto
197 */
198enum rc_proto {
199 RC_PROTO_UNKNOWN = 0,
200 RC_PROTO_OTHER = 1,
201 RC_PROTO_RC5 = 2,
202 RC_PROTO_RC5X_20 = 3,
203 RC_PROTO_RC5_SZ = 4,
204 RC_PROTO_JVC = 5,
205 RC_PROTO_SONY12 = 6,
206 RC_PROTO_SONY15 = 7,
207 RC_PROTO_SONY20 = 8,
208 RC_PROTO_NEC = 9,
209 RC_PROTO_NECX = 10,
210 RC_PROTO_NEC32 = 11,
211 RC_PROTO_SANYO = 12,
212 RC_PROTO_MCIR2_KBD = 13,
213 RC_PROTO_MCIR2_MSE = 14,
214 RC_PROTO_RC6_0 = 15,
215 RC_PROTO_RC6_6A_20 = 16,
216 RC_PROTO_RC6_6A_24 = 17,
217 RC_PROTO_RC6_6A_32 = 18,
218 RC_PROTO_RC6_MCE = 19,
219 RC_PROTO_SHARP = 20,
220 RC_PROTO_XMP = 21,
221 RC_PROTO_CEC = 22,
222 RC_PROTO_IMON = 23,
223 RC_PROTO_RCMM12 = 24,
224 RC_PROTO_RCMM24 = 25,
225 RC_PROTO_RCMM32 = 26,
226 RC_PROTO_XBOX_DVD = 27,
227 RC_PROTO_MAX = RC_PROTO_XBOX_DVD,
228};
229
230#endif