Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * An RTC driver for Allwinner A31/A23
4 *
5 * Copyright (c) 2014, Chen-Yu Tsai <wens@csie.org>
6 *
7 * based on rtc-sunxi.c
8 *
9 * An RTC driver for Allwinner A10/A20
10 *
11 * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
12 */
13
14#include <linux/clk.h>
15#include <linux/clk-provider.h>
16#include <linux/clk/sunxi-ng.h>
17#include <linux/delay.h>
18#include <linux/err.h>
19#include <linux/fs.h>
20#include <linux/init.h>
21#include <linux/interrupt.h>
22#include <linux/io.h>
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/of.h>
26#include <linux/of_address.h>
27#include <linux/of_device.h>
28#include <linux/platform_device.h>
29#include <linux/rtc.h>
30#include <linux/slab.h>
31#include <linux/types.h>
32
33/* Control register */
34#define SUN6I_LOSC_CTRL 0x0000
35#define SUN6I_LOSC_CTRL_KEY (0x16aa << 16)
36#define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS BIT(15)
37#define SUN6I_LOSC_CTRL_ALM_DHMS_ACC BIT(9)
38#define SUN6I_LOSC_CTRL_RTC_HMS_ACC BIT(8)
39#define SUN6I_LOSC_CTRL_RTC_YMD_ACC BIT(7)
40#define SUN6I_LOSC_CTRL_EXT_LOSC_EN BIT(4)
41#define SUN6I_LOSC_CTRL_EXT_OSC BIT(0)
42#define SUN6I_LOSC_CTRL_ACC_MASK GENMASK(9, 7)
43
44#define SUN6I_LOSC_CLK_PRESCAL 0x0008
45
46/* RTC */
47#define SUN6I_RTC_YMD 0x0010
48#define SUN6I_RTC_HMS 0x0014
49
50/* Alarm 0 (counter) */
51#define SUN6I_ALRM_COUNTER 0x0020
52/* This holds the remaining alarm seconds on older SoCs (current value) */
53#define SUN6I_ALRM_COUNTER_HMS 0x0024
54#define SUN6I_ALRM_EN 0x0028
55#define SUN6I_ALRM_EN_CNT_EN BIT(0)
56#define SUN6I_ALRM_IRQ_EN 0x002c
57#define SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0)
58#define SUN6I_ALRM_IRQ_STA 0x0030
59#define SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0)
60
61/* Alarm 1 (wall clock) */
62#define SUN6I_ALRM1_EN 0x0044
63#define SUN6I_ALRM1_IRQ_EN 0x0048
64#define SUN6I_ALRM1_IRQ_STA 0x004c
65#define SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND BIT(0)
66
67/* Alarm config */
68#define SUN6I_ALARM_CONFIG 0x0050
69#define SUN6I_ALARM_CONFIG_WAKEUP BIT(0)
70
71#define SUN6I_LOSC_OUT_GATING 0x0060
72#define SUN6I_LOSC_OUT_GATING_EN_OFFSET 0
73
74/*
75 * Get date values
76 */
77#define SUN6I_DATE_GET_DAY_VALUE(x) ((x) & 0x0000001f)
78#define SUN6I_DATE_GET_MON_VALUE(x) (((x) & 0x00000f00) >> 8)
79#define SUN6I_DATE_GET_YEAR_VALUE(x) (((x) & 0x003f0000) >> 16)
80#define SUN6I_LEAP_GET_VALUE(x) (((x) & 0x00400000) >> 22)
81
82/*
83 * Get time values
84 */
85#define SUN6I_TIME_GET_SEC_VALUE(x) ((x) & 0x0000003f)
86#define SUN6I_TIME_GET_MIN_VALUE(x) (((x) & 0x00003f00) >> 8)
87#define SUN6I_TIME_GET_HOUR_VALUE(x) (((x) & 0x001f0000) >> 16)
88
89/*
90 * Set date values
91 */
92#define SUN6I_DATE_SET_DAY_VALUE(x) ((x) & 0x0000001f)
93#define SUN6I_DATE_SET_MON_VALUE(x) ((x) << 8 & 0x00000f00)
94#define SUN6I_DATE_SET_YEAR_VALUE(x) ((x) << 16 & 0x003f0000)
95#define SUN6I_LEAP_SET_VALUE(x) ((x) << 22 & 0x00400000)
96
97/*
98 * Set time values
99 */
100#define SUN6I_TIME_SET_SEC_VALUE(x) ((x) & 0x0000003f)
101#define SUN6I_TIME_SET_MIN_VALUE(x) ((x) << 8 & 0x00003f00)
102#define SUN6I_TIME_SET_HOUR_VALUE(x) ((x) << 16 & 0x001f0000)
103
104/*
105 * The year parameter passed to the driver is usually an offset relative to
106 * the year 1900. This macro is used to convert this offset to another one
107 * relative to the minimum year allowed by the hardware.
108 *
109 * The year range is 1970 - 2033. This range is selected to match Allwinner's
110 * driver, even though it is somewhat limited.
111 */
112#define SUN6I_YEAR_MIN 1970
113#define SUN6I_YEAR_OFF (SUN6I_YEAR_MIN - 1900)
114
115#define SECS_PER_DAY (24 * 3600ULL)
116
117/*
118 * There are other differences between models, including:
119 *
120 * - number of GPIO pins that can be configured to hold a certain level
121 * - crypto-key related registers (H5, H6)
122 * - boot process related (super standby, secondary processor entry address)
123 * registers (R40, H6)
124 * - SYS power domain controls (R40)
125 * - DCXO controls (H6)
126 * - RC oscillator calibration (H6)
127 *
128 * These functions are not covered by this driver.
129 */
130struct sun6i_rtc_clk_data {
131 unsigned long rc_osc_rate;
132 unsigned int fixed_prescaler : 16;
133 unsigned int has_prescaler : 1;
134 unsigned int has_out_clk : 1;
135 unsigned int export_iosc : 1;
136 unsigned int has_losc_en : 1;
137 unsigned int has_auto_swt : 1;
138};
139
140#define RTC_LINEAR_DAY BIT(0)
141
142struct sun6i_rtc_dev {
143 struct rtc_device *rtc;
144 const struct sun6i_rtc_clk_data *data;
145 void __iomem *base;
146 int irq;
147 time64_t alarm;
148 unsigned long flags;
149
150 struct clk_hw hw;
151 struct clk_hw *int_osc;
152 struct clk *losc;
153 struct clk *ext_losc;
154
155 spinlock_t lock;
156};
157
158static struct sun6i_rtc_dev *sun6i_rtc;
159
160static unsigned long sun6i_rtc_osc_recalc_rate(struct clk_hw *hw,
161 unsigned long parent_rate)
162{
163 struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
164 u32 val = 0;
165
166 val = readl(rtc->base + SUN6I_LOSC_CTRL);
167 if (val & SUN6I_LOSC_CTRL_EXT_OSC)
168 return parent_rate;
169
170 if (rtc->data->fixed_prescaler)
171 parent_rate /= rtc->data->fixed_prescaler;
172
173 if (rtc->data->has_prescaler) {
174 val = readl(rtc->base + SUN6I_LOSC_CLK_PRESCAL);
175 val &= GENMASK(4, 0);
176 }
177
178 return parent_rate / (val + 1);
179}
180
181static u8 sun6i_rtc_osc_get_parent(struct clk_hw *hw)
182{
183 struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
184
185 return readl(rtc->base + SUN6I_LOSC_CTRL) & SUN6I_LOSC_CTRL_EXT_OSC;
186}
187
188static int sun6i_rtc_osc_set_parent(struct clk_hw *hw, u8 index)
189{
190 struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
191 unsigned long flags;
192 u32 val;
193
194 if (index > 1)
195 return -EINVAL;
196
197 spin_lock_irqsave(&rtc->lock, flags);
198 val = readl(rtc->base + SUN6I_LOSC_CTRL);
199 val &= ~SUN6I_LOSC_CTRL_EXT_OSC;
200 val |= SUN6I_LOSC_CTRL_KEY;
201 val |= index ? SUN6I_LOSC_CTRL_EXT_OSC : 0;
202 if (rtc->data->has_losc_en) {
203 val &= ~SUN6I_LOSC_CTRL_EXT_LOSC_EN;
204 val |= index ? SUN6I_LOSC_CTRL_EXT_LOSC_EN : 0;
205 }
206 writel(val, rtc->base + SUN6I_LOSC_CTRL);
207 spin_unlock_irqrestore(&rtc->lock, flags);
208
209 return 0;
210}
211
212static const struct clk_ops sun6i_rtc_osc_ops = {
213 .recalc_rate = sun6i_rtc_osc_recalc_rate,
214
215 .get_parent = sun6i_rtc_osc_get_parent,
216 .set_parent = sun6i_rtc_osc_set_parent,
217};
218
219static void __init sun6i_rtc_clk_init(struct device_node *node,
220 const struct sun6i_rtc_clk_data *data)
221{
222 struct clk_hw_onecell_data *clk_data;
223 struct sun6i_rtc_dev *rtc;
224 struct clk_init_data init = {
225 .ops = &sun6i_rtc_osc_ops,
226 .name = "losc",
227 };
228 const char *iosc_name = "rtc-int-osc";
229 const char *clkout_name = "osc32k-out";
230 const char *parents[2];
231 u32 reg;
232
233 rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
234 if (!rtc)
235 return;
236
237 rtc->data = data;
238 clk_data = kzalloc(struct_size(clk_data, hws, 3), GFP_KERNEL);
239 if (!clk_data) {
240 kfree(rtc);
241 return;
242 }
243
244 spin_lock_init(&rtc->lock);
245
246 rtc->base = of_io_request_and_map(node, 0, of_node_full_name(node));
247 if (IS_ERR(rtc->base)) {
248 pr_crit("Can't map RTC registers");
249 goto err;
250 }
251
252 reg = SUN6I_LOSC_CTRL_KEY;
253 if (rtc->data->has_auto_swt) {
254 /* Bypass auto-switch to int osc, on ext losc failure */
255 reg |= SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS;
256 writel(reg, rtc->base + SUN6I_LOSC_CTRL);
257 }
258
259 /* Switch to the external, more precise, oscillator, if present */
260 if (of_get_property(node, "clocks", NULL)) {
261 reg |= SUN6I_LOSC_CTRL_EXT_OSC;
262 if (rtc->data->has_losc_en)
263 reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN;
264 }
265 writel(reg, rtc->base + SUN6I_LOSC_CTRL);
266
267 /* Yes, I know, this is ugly. */
268 sun6i_rtc = rtc;
269
270 /* Only read IOSC name from device tree if it is exported */
271 if (rtc->data->export_iosc)
272 of_property_read_string_index(node, "clock-output-names", 2,
273 &iosc_name);
274
275 rtc->int_osc = clk_hw_register_fixed_rate_with_accuracy(NULL,
276 iosc_name,
277 NULL, 0,
278 rtc->data->rc_osc_rate,
279 300000000);
280 if (IS_ERR(rtc->int_osc)) {
281 pr_crit("Couldn't register the internal oscillator\n");
282 goto err;
283 }
284
285 parents[0] = clk_hw_get_name(rtc->int_osc);
286 /* If there is no external oscillator, this will be NULL and ... */
287 parents[1] = of_clk_get_parent_name(node, 0);
288
289 rtc->hw.init = &init;
290
291 init.parent_names = parents;
292 /* ... number of clock parents will be 1. */
293 init.num_parents = of_clk_get_parent_count(node) + 1;
294 of_property_read_string_index(node, "clock-output-names", 0,
295 &init.name);
296
297 rtc->losc = clk_register(NULL, &rtc->hw);
298 if (IS_ERR(rtc->losc)) {
299 pr_crit("Couldn't register the LOSC clock\n");
300 goto err_register;
301 }
302
303 of_property_read_string_index(node, "clock-output-names", 1,
304 &clkout_name);
305 rtc->ext_losc = clk_register_gate(NULL, clkout_name, init.name,
306 0, rtc->base + SUN6I_LOSC_OUT_GATING,
307 SUN6I_LOSC_OUT_GATING_EN_OFFSET, 0,
308 &rtc->lock);
309 if (IS_ERR(rtc->ext_losc)) {
310 pr_crit("Couldn't register the LOSC external gate\n");
311 goto err_register;
312 }
313
314 clk_data->num = 2;
315 clk_data->hws[0] = &rtc->hw;
316 clk_data->hws[1] = __clk_get_hw(rtc->ext_losc);
317 if (rtc->data->export_iosc) {
318 clk_data->hws[2] = rtc->int_osc;
319 clk_data->num = 3;
320 }
321 of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
322 return;
323
324err_register:
325 clk_hw_unregister_fixed_rate(rtc->int_osc);
326err:
327 kfree(clk_data);
328}
329
330static const struct sun6i_rtc_clk_data sun6i_a31_rtc_data = {
331 .rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
332 .has_prescaler = 1,
333};
334
335static void __init sun6i_a31_rtc_clk_init(struct device_node *node)
336{
337 sun6i_rtc_clk_init(node, &sun6i_a31_rtc_data);
338}
339CLK_OF_DECLARE_DRIVER(sun6i_a31_rtc_clk, "allwinner,sun6i-a31-rtc",
340 sun6i_a31_rtc_clk_init);
341
342static const struct sun6i_rtc_clk_data sun8i_a23_rtc_data = {
343 .rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
344 .has_prescaler = 1,
345 .has_out_clk = 1,
346};
347
348static void __init sun8i_a23_rtc_clk_init(struct device_node *node)
349{
350 sun6i_rtc_clk_init(node, &sun8i_a23_rtc_data);
351}
352CLK_OF_DECLARE_DRIVER(sun8i_a23_rtc_clk, "allwinner,sun8i-a23-rtc",
353 sun8i_a23_rtc_clk_init);
354
355static const struct sun6i_rtc_clk_data sun8i_h3_rtc_data = {
356 .rc_osc_rate = 16000000,
357 .fixed_prescaler = 32,
358 .has_prescaler = 1,
359 .has_out_clk = 1,
360 .export_iosc = 1,
361};
362
363static void __init sun8i_h3_rtc_clk_init(struct device_node *node)
364{
365 sun6i_rtc_clk_init(node, &sun8i_h3_rtc_data);
366}
367CLK_OF_DECLARE_DRIVER(sun8i_h3_rtc_clk, "allwinner,sun8i-h3-rtc",
368 sun8i_h3_rtc_clk_init);
369/* As far as we are concerned, clocks for H5 are the same as H3 */
370CLK_OF_DECLARE_DRIVER(sun50i_h5_rtc_clk, "allwinner,sun50i-h5-rtc",
371 sun8i_h3_rtc_clk_init);
372
373/*
374 * The R40 user manual is self-conflicting on whether the prescaler is
375 * fixed or configurable. The clock diagram shows it as fixed, but there
376 * is also a configurable divider in the RTC block.
377 */
378static const struct sun6i_rtc_clk_data sun8i_r40_rtc_data = {
379 .rc_osc_rate = 16000000,
380 .fixed_prescaler = 512,
381};
382static void __init sun8i_r40_rtc_clk_init(struct device_node *node)
383{
384 sun6i_rtc_clk_init(node, &sun8i_r40_rtc_data);
385}
386CLK_OF_DECLARE_DRIVER(sun8i_r40_rtc_clk, "allwinner,sun8i-r40-rtc",
387 sun8i_r40_rtc_clk_init);
388
389static const struct sun6i_rtc_clk_data sun8i_v3_rtc_data = {
390 .rc_osc_rate = 32000,
391 .has_out_clk = 1,
392};
393
394static void __init sun8i_v3_rtc_clk_init(struct device_node *node)
395{
396 sun6i_rtc_clk_init(node, &sun8i_v3_rtc_data);
397}
398CLK_OF_DECLARE_DRIVER(sun8i_v3_rtc_clk, "allwinner,sun8i-v3-rtc",
399 sun8i_v3_rtc_clk_init);
400
401static irqreturn_t sun6i_rtc_alarmirq(int irq, void *id)
402{
403 struct sun6i_rtc_dev *chip = (struct sun6i_rtc_dev *) id;
404 irqreturn_t ret = IRQ_NONE;
405 u32 val;
406
407 spin_lock(&chip->lock);
408 val = readl(chip->base + SUN6I_ALRM_IRQ_STA);
409
410 if (val & SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND) {
411 val |= SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND;
412 writel(val, chip->base + SUN6I_ALRM_IRQ_STA);
413
414 rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
415
416 ret = IRQ_HANDLED;
417 }
418 spin_unlock(&chip->lock);
419
420 return ret;
421}
422
423static void sun6i_rtc_setaie(int to, struct sun6i_rtc_dev *chip)
424{
425 u32 alrm_val = 0;
426 u32 alrm_irq_val = 0;
427 u32 alrm_wake_val = 0;
428 unsigned long flags;
429
430 if (to) {
431 alrm_val = SUN6I_ALRM_EN_CNT_EN;
432 alrm_irq_val = SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN;
433 alrm_wake_val = SUN6I_ALARM_CONFIG_WAKEUP;
434 } else {
435 writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
436 chip->base + SUN6I_ALRM_IRQ_STA);
437 }
438
439 spin_lock_irqsave(&chip->lock, flags);
440 writel(alrm_val, chip->base + SUN6I_ALRM_EN);
441 writel(alrm_irq_val, chip->base + SUN6I_ALRM_IRQ_EN);
442 writel(alrm_wake_val, chip->base + SUN6I_ALARM_CONFIG);
443 spin_unlock_irqrestore(&chip->lock, flags);
444}
445
446static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
447{
448 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
449 u32 date, time;
450
451 /*
452 * read again in case it changes
453 */
454 do {
455 date = readl(chip->base + SUN6I_RTC_YMD);
456 time = readl(chip->base + SUN6I_RTC_HMS);
457 } while ((date != readl(chip->base + SUN6I_RTC_YMD)) ||
458 (time != readl(chip->base + SUN6I_RTC_HMS)));
459
460 if (chip->flags & RTC_LINEAR_DAY) {
461 /*
462 * Newer chips store a linear day number, the manual
463 * does not mandate any epoch base. The BSP driver uses
464 * the UNIX epoch, let's just copy that, as it's the
465 * easiest anyway.
466 */
467 rtc_time64_to_tm((date & 0xffff) * SECS_PER_DAY, rtc_tm);
468 } else {
469 rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
470 rtc_tm->tm_mon = SUN6I_DATE_GET_MON_VALUE(date) - 1;
471 rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
472
473 /*
474 * switch from (data_year->min)-relative offset to
475 * a (1900)-relative one
476 */
477 rtc_tm->tm_year += SUN6I_YEAR_OFF;
478 }
479
480 rtc_tm->tm_sec = SUN6I_TIME_GET_SEC_VALUE(time);
481 rtc_tm->tm_min = SUN6I_TIME_GET_MIN_VALUE(time);
482 rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time);
483
484 return 0;
485}
486
487static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
488{
489 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
490 unsigned long flags;
491 u32 alrm_st;
492 u32 alrm_en;
493
494 spin_lock_irqsave(&chip->lock, flags);
495 alrm_en = readl(chip->base + SUN6I_ALRM_IRQ_EN);
496 alrm_st = readl(chip->base + SUN6I_ALRM_IRQ_STA);
497 spin_unlock_irqrestore(&chip->lock, flags);
498
499 wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN);
500 wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN);
501 rtc_time64_to_tm(chip->alarm, &wkalrm->time);
502
503 return 0;
504}
505
506static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
507{
508 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
509 struct rtc_time *alrm_tm = &wkalrm->time;
510 struct rtc_time tm_now;
511 time64_t time_set;
512 u32 counter_val, counter_val_hms;
513 int ret;
514
515 time_set = rtc_tm_to_time64(alrm_tm);
516
517 if (chip->flags & RTC_LINEAR_DAY) {
518 /*
519 * The alarm registers hold the actual alarm time, encoded
520 * in the same way (linear day + HMS) as the current time.
521 */
522 counter_val_hms = SUN6I_TIME_SET_SEC_VALUE(alrm_tm->tm_sec) |
523 SUN6I_TIME_SET_MIN_VALUE(alrm_tm->tm_min) |
524 SUN6I_TIME_SET_HOUR_VALUE(alrm_tm->tm_hour);
525 /* The division will cut off the H:M:S part of alrm_tm. */
526 counter_val = div_u64(rtc_tm_to_time64(alrm_tm), SECS_PER_DAY);
527 } else {
528 /* The alarm register holds the number of seconds left. */
529 time64_t time_now;
530
531 ret = sun6i_rtc_gettime(dev, &tm_now);
532 if (ret < 0) {
533 dev_err(dev, "Error in getting time\n");
534 return -EINVAL;
535 }
536
537 time_now = rtc_tm_to_time64(&tm_now);
538 if (time_set <= time_now) {
539 dev_err(dev, "Date to set in the past\n");
540 return -EINVAL;
541 }
542 if ((time_set - time_now) > U32_MAX) {
543 dev_err(dev, "Date too far in the future\n");
544 return -EINVAL;
545 }
546
547 counter_val = time_set - time_now;
548 }
549
550 sun6i_rtc_setaie(0, chip);
551 writel(0, chip->base + SUN6I_ALRM_COUNTER);
552 if (chip->flags & RTC_LINEAR_DAY)
553 writel(0, chip->base + SUN6I_ALRM_COUNTER_HMS);
554 usleep_range(100, 300);
555
556 writel(counter_val, chip->base + SUN6I_ALRM_COUNTER);
557 if (chip->flags & RTC_LINEAR_DAY)
558 writel(counter_val_hms, chip->base + SUN6I_ALRM_COUNTER_HMS);
559 chip->alarm = time_set;
560
561 sun6i_rtc_setaie(wkalrm->enabled, chip);
562
563 return 0;
564}
565
566static int sun6i_rtc_wait(struct sun6i_rtc_dev *chip, int offset,
567 unsigned int mask, unsigned int ms_timeout)
568{
569 const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
570 u32 reg;
571
572 do {
573 reg = readl(chip->base + offset);
574 reg &= mask;
575
576 if (!reg)
577 return 0;
578
579 } while (time_before(jiffies, timeout));
580
581 return -ETIMEDOUT;
582}
583
584static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
585{
586 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
587 u32 date = 0;
588 u32 time = 0;
589
590 time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) |
591 SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min) |
592 SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
593
594 if (chip->flags & RTC_LINEAR_DAY) {
595 /* The division will cut off the H:M:S part of rtc_tm. */
596 date = div_u64(rtc_tm_to_time64(rtc_tm), SECS_PER_DAY);
597 } else {
598 rtc_tm->tm_year -= SUN6I_YEAR_OFF;
599 rtc_tm->tm_mon += 1;
600
601 date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
602 SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon) |
603 SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
604
605 if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
606 date |= SUN6I_LEAP_SET_VALUE(1);
607 }
608
609 /* Check whether registers are writable */
610 if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
611 SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
612 dev_err(dev, "rtc is still busy.\n");
613 return -EBUSY;
614 }
615
616 writel(time, chip->base + SUN6I_RTC_HMS);
617
618 /*
619 * After writing the RTC HH-MM-SS register, the
620 * SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
621 * be cleared until the real writing operation is finished
622 */
623
624 if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
625 SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) {
626 dev_err(dev, "Failed to set rtc time.\n");
627 return -ETIMEDOUT;
628 }
629
630 writel(date, chip->base + SUN6I_RTC_YMD);
631
632 /*
633 * After writing the RTC YY-MM-DD register, the
634 * SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
635 * be cleared until the real writing operation is finished
636 */
637
638 if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
639 SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) {
640 dev_err(dev, "Failed to set rtc time.\n");
641 return -ETIMEDOUT;
642 }
643
644 return 0;
645}
646
647static int sun6i_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
648{
649 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
650
651 if (!enabled)
652 sun6i_rtc_setaie(enabled, chip);
653
654 return 0;
655}
656
657static const struct rtc_class_ops sun6i_rtc_ops = {
658 .read_time = sun6i_rtc_gettime,
659 .set_time = sun6i_rtc_settime,
660 .read_alarm = sun6i_rtc_getalarm,
661 .set_alarm = sun6i_rtc_setalarm,
662 .alarm_irq_enable = sun6i_rtc_alarm_irq_enable
663};
664
665#ifdef CONFIG_PM_SLEEP
666/* Enable IRQ wake on suspend, to wake up from RTC. */
667static int sun6i_rtc_suspend(struct device *dev)
668{
669 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
670
671 if (device_may_wakeup(dev))
672 enable_irq_wake(chip->irq);
673
674 return 0;
675}
676
677/* Disable IRQ wake on resume. */
678static int sun6i_rtc_resume(struct device *dev)
679{
680 struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
681
682 if (device_may_wakeup(dev))
683 disable_irq_wake(chip->irq);
684
685 return 0;
686}
687#endif
688
689static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops,
690 sun6i_rtc_suspend, sun6i_rtc_resume);
691
692static void sun6i_rtc_bus_clk_cleanup(void *data)
693{
694 struct clk *bus_clk = data;
695
696 clk_disable_unprepare(bus_clk);
697}
698
699static int sun6i_rtc_probe(struct platform_device *pdev)
700{
701 struct sun6i_rtc_dev *chip = sun6i_rtc;
702 struct device *dev = &pdev->dev;
703 struct clk *bus_clk;
704 int ret;
705
706 bus_clk = devm_clk_get_optional(dev, "bus");
707 if (IS_ERR(bus_clk))
708 return PTR_ERR(bus_clk);
709
710 if (bus_clk) {
711 ret = clk_prepare_enable(bus_clk);
712 if (ret)
713 return ret;
714
715 ret = devm_add_action_or_reset(dev, sun6i_rtc_bus_clk_cleanup,
716 bus_clk);
717 if (ret)
718 return ret;
719 }
720
721 if (!chip) {
722 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
723 if (!chip)
724 return -ENOMEM;
725
726 spin_lock_init(&chip->lock);
727
728 chip->base = devm_platform_ioremap_resource(pdev, 0);
729 if (IS_ERR(chip->base))
730 return PTR_ERR(chip->base);
731
732 if (IS_REACHABLE(CONFIG_SUN6I_RTC_CCU)) {
733 ret = sun6i_rtc_ccu_probe(dev, chip->base);
734 if (ret)
735 return ret;
736 }
737 }
738
739 platform_set_drvdata(pdev, chip);
740
741 chip->flags = (unsigned long)of_device_get_match_data(&pdev->dev);
742
743 chip->irq = platform_get_irq(pdev, 0);
744 if (chip->irq < 0)
745 return chip->irq;
746
747 ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
748 0, dev_name(&pdev->dev), chip);
749 if (ret) {
750 dev_err(&pdev->dev, "Could not request IRQ\n");
751 return ret;
752 }
753
754 /* clear the alarm counter value */
755 writel(0, chip->base + SUN6I_ALRM_COUNTER);
756
757 /* disable counter alarm */
758 writel(0, chip->base + SUN6I_ALRM_EN);
759
760 /* disable counter alarm interrupt */
761 writel(0, chip->base + SUN6I_ALRM_IRQ_EN);
762
763 /* disable week alarm */
764 writel(0, chip->base + SUN6I_ALRM1_EN);
765
766 /* disable week alarm interrupt */
767 writel(0, chip->base + SUN6I_ALRM1_IRQ_EN);
768
769 /* clear counter alarm pending interrupts */
770 writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
771 chip->base + SUN6I_ALRM_IRQ_STA);
772
773 /* clear week alarm pending interrupts */
774 writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND,
775 chip->base + SUN6I_ALRM1_IRQ_STA);
776
777 /* disable alarm wakeup */
778 writel(0, chip->base + SUN6I_ALARM_CONFIG);
779
780 clk_prepare_enable(chip->losc);
781
782 device_init_wakeup(&pdev->dev, 1);
783
784 chip->rtc = devm_rtc_allocate_device(&pdev->dev);
785 if (IS_ERR(chip->rtc))
786 return PTR_ERR(chip->rtc);
787
788 chip->rtc->ops = &sun6i_rtc_ops;
789 if (chip->flags & RTC_LINEAR_DAY)
790 chip->rtc->range_max = (65536 * SECS_PER_DAY) - 1;
791 else
792 chip->rtc->range_max = 2019686399LL; /* 2033-12-31 23:59:59 */
793
794 ret = devm_rtc_register_device(chip->rtc);
795 if (ret)
796 return ret;
797
798 dev_info(&pdev->dev, "RTC enabled\n");
799
800 return 0;
801}
802
803/*
804 * As far as RTC functionality goes, all models are the same. The
805 * datasheets claim that different models have different number of
806 * registers available for non-volatile storage, but experiments show
807 * that all SoCs have 16 registers available for this purpose.
808 */
809static const struct of_device_id sun6i_rtc_dt_ids[] = {
810 { .compatible = "allwinner,sun6i-a31-rtc" },
811 { .compatible = "allwinner,sun8i-a23-rtc" },
812 { .compatible = "allwinner,sun8i-h3-rtc" },
813 { .compatible = "allwinner,sun8i-r40-rtc" },
814 { .compatible = "allwinner,sun8i-v3-rtc" },
815 { .compatible = "allwinner,sun50i-h5-rtc" },
816 { .compatible = "allwinner,sun50i-h6-rtc" },
817 { .compatible = "allwinner,sun50i-h616-rtc",
818 .data = (void *)RTC_LINEAR_DAY },
819 { /* sentinel */ },
820};
821MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
822
823static struct platform_driver sun6i_rtc_driver = {
824 .probe = sun6i_rtc_probe,
825 .driver = {
826 .name = "sun6i-rtc",
827 .of_match_table = sun6i_rtc_dt_ids,
828 .pm = &sun6i_rtc_pm_ops,
829 },
830};
831builtin_platform_driver(sun6i_rtc_driver);