tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2019, Linaro Limited
5 */
6
7#include <dt-bindings/iio/qcom,spmi-vadc.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/spmi/spmi.h>
10
11/ {
12 thermal-zones {
13 pm8150b-thermal {
14 polling-delay-passive = <100>;
15 polling-delay = <0>;
16
17 thermal-sensors = <&pm8150b_temp>;
18
19 trips {
20 trip0 {
21 temperature = <95000>;
22 hysteresis = <0>;
23 type = "passive";
24 };
25
26 trip1 {
27 temperature = <115000>;
28 hysteresis = <0>;
29 type = "hot";
30 };
31
32 trip2 {
33 temperature = <145000>;
34 hysteresis = <0>;
35 type = "critical";
36 };
37 };
38 };
39 };
40};
41
42&spmi_bus {
43 pmic@2 {
44 compatible = "qcom,pm8150b", "qcom,spmi-pmic";
45 reg = <0x2 SPMI_USID>;
46 #address-cells = <1>;
47 #size-cells = <0>;
48
49 power-on@800 {
50 compatible = "qcom,pm8916-pon";
51 reg = <0x0800>;
52
53 status = "disabled";
54 };
55
56 pm8150b_vbus: dcdc@1100 {
57 compatible = "qcom,pm8150b-vbus-reg";
58 status = "disabled";
59 reg = <0x1100>;
60 };
61
62 pm8150b_temp: temp-alarm@2400 {
63 compatible = "qcom,spmi-temp-alarm";
64 reg = <0x2400>;
65 interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
66 io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
67 io-channel-names = "thermal";
68 #thermal-sensor-cells = <0>;
69 };
70
71 pm8150b_adc: adc@3100 {
72 compatible = "qcom,spmi-adc5";
73 reg = <0x3100>;
74 #address-cells = <1>;
75 #size-cells = <0>;
76 #io-channel-cells = <1>;
77 interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
78
79 ref-gnd@0 {
80 reg = <ADC5_REF_GND>;
81 qcom,pre-scaling = <1 1>;
82 label = "ref_gnd";
83 };
84
85 vref-1p25@1 {
86 reg = <ADC5_1P25VREF>;
87 qcom,pre-scaling = <1 1>;
88 label = "vref_1p25";
89 };
90
91 die-temp@6 {
92 reg = <ADC5_DIE_TEMP>;
93 qcom,pre-scaling = <1 1>;
94 label = "die_temp";
95 };
96
97 chg-temp@9 {
98 reg = <ADC5_CHG_TEMP>;
99 qcom,pre-scaling = <1 1>;
100 label = "chg_temp";
101 };
102 };
103
104 pm8150b_adc_tm: adc-tm@3500 {
105 compatible = "qcom,spmi-adc-tm5";
106 reg = <0x3500>;
107 interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
108 #thermal-sensor-cells = <1>;
109 #address-cells = <1>;
110 #size-cells = <0>;
111 status = "disabled";
112 };
113
114 pm8150b_gpios: gpio@c000 {
115 compatible = "qcom,pm8150b-gpio";
116 reg = <0xc000>;
117 gpio-controller;
118 #gpio-cells = <2>;
119 interrupt-controller;
120 #interrupt-cells = <2>;
121 };
122 };
123
124 pmic@3 {
125 compatible = "qcom,pm8150b", "qcom,spmi-pmic";
126 reg = <0x3 SPMI_USID>;
127 #address-cells = <1>;
128 #size-cells = <0>;
129 };
130};