tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# Test that packets are sampled when tc-sample is used and that reported
5# metadata is correct. Two sets of hosts (with and without LAG) are used, since
6# metadata extraction in mlxsw is a bit different when LAG is involved.
7#
8# +---------------------------------+ +---------------------------------+
9# | H1 (vrf) | | H3 (vrf) |
10# | + $h1 | | + $h3_lag |
11# | | 192.0.2.1/28 | | | 192.0.2.17/28 |
12# | | | | | |
13# | | default via 192.0.2.2 | | | default via 192.0.2.18 |
14# +----|----------------------------+ +----|----------------------------+
15# | |
16# +----|-----------------------------------------|----------------------------+
17# | | 192.0.2.2/28 | 192.0.2.18/28 |
18# | + $rp1 + $rp3_lag |
19# | |
20# | + $rp2 + $rp4_lag |
21# | | 198.51.100.2/28 | 198.51.100.18/28 |
22# +----|-----------------------------------------|----------------------------+
23# | |
24# +----|----------------------------+ +----|----------------------------+
25# | | default via 198.51.100.2 | | | default via 198.51.100.18 |
26# | | | | | |
27# | | 198.51.100.1/28 | | | 198.51.100.17/28 |
28# | + $h2 | | + $h4_lag |
29# | H2 (vrf) | | H4 (vrf) |
30# +---------------------------------+ +---------------------------------+
31
32lib_dir=$(dirname $0)/../../../net/forwarding
33
34ALL_TESTS="
35 tc_sample_rate_test
36 tc_sample_max_rate_test
37 tc_sample_conflict_test
38 tc_sample_group_conflict_test
39 tc_sample_md_iif_test
40 tc_sample_md_lag_iif_test
41 tc_sample_md_oif_test
42 tc_sample_md_lag_oif_test
43 tc_sample_md_out_tc_test
44 tc_sample_md_out_tc_occ_test
45 tc_sample_md_latency_test
46 tc_sample_acl_group_conflict_test
47 tc_sample_acl_rate_test
48 tc_sample_acl_max_rate_test
49"
50NUM_NETIFS=8
51CAPTURE_FILE=$(mktemp)
52source $lib_dir/lib.sh
53source $lib_dir/devlink_lib.sh
54source mlxsw_lib.sh
55
56# Available at https://github.com/Mellanox/libpsample
57require_command psample
58
59h1_create()
60{
61 simple_if_init $h1 192.0.2.1/28
62
63 ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
64}
65
66h1_destroy()
67{
68 ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
69
70 simple_if_fini $h1 192.0.2.1/28
71}
72
73h2_create()
74{
75 simple_if_init $h2 198.51.100.1/28
76
77 ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
78}
79
80h2_destroy()
81{
82 ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
83
84 simple_if_fini $h2 198.51.100.1/28
85}
86
87h3_create()
88{
89 ip link set dev $h3 down
90 ip link add name ${h3}_bond type bond mode 802.3ad
91 ip link set dev $h3 master ${h3}_bond
92
93 simple_if_init ${h3}_bond 192.0.2.17/28
94
95 ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18
96}
97
98h3_destroy()
99{
100 ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18
101
102 simple_if_fini ${h3}_bond 192.0.2.17/28
103
104 ip link set dev $h3 nomaster
105 ip link del dev ${h3}_bond
106}
107
108h4_create()
109{
110 ip link set dev $h4 down
111 ip link add name ${h4}_bond type bond mode 802.3ad
112 ip link set dev $h4 master ${h4}_bond
113
114 simple_if_init ${h4}_bond 198.51.100.17/28
115
116 ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18
117}
118
119h4_destroy()
120{
121 ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18
122
123 simple_if_fini ${h4}_bond 198.51.100.17/28
124
125 ip link set dev $h4 nomaster
126 ip link del dev ${h4}_bond
127}
128
129router_create()
130{
131 ip link set dev $rp1 up
132 __addr_add_del $rp1 add 192.0.2.2/28
133 tc qdisc add dev $rp1 clsact
134
135 ip link set dev $rp2 up
136 __addr_add_del $rp2 add 198.51.100.2/28
137 tc qdisc add dev $rp2 clsact
138
139 ip link add name ${rp3}_bond type bond mode 802.3ad
140 ip link set dev $rp3 master ${rp3}_bond
141 __addr_add_del ${rp3}_bond add 192.0.2.18/28
142 tc qdisc add dev $rp3 clsact
143 ip link set dev ${rp3}_bond up
144
145 ip link add name ${rp4}_bond type bond mode 802.3ad
146 ip link set dev $rp4 master ${rp4}_bond
147 __addr_add_del ${rp4}_bond add 198.51.100.18/28
148 tc qdisc add dev $rp4 clsact
149 ip link set dev ${rp4}_bond up
150}
151
152router_destroy()
153{
154 ip link set dev ${rp4}_bond down
155 tc qdisc del dev $rp4 clsact
156 __addr_add_del ${rp4}_bond del 198.51.100.18/28
157 ip link set dev $rp4 nomaster
158 ip link del dev ${rp4}_bond
159
160 ip link set dev ${rp3}_bond down
161 tc qdisc del dev $rp3 clsact
162 __addr_add_del ${rp3}_bond del 192.0.2.18/28
163 ip link set dev $rp3 nomaster
164 ip link del dev ${rp3}_bond
165
166 tc qdisc del dev $rp2 clsact
167 __addr_add_del $rp2 del 198.51.100.2/28
168 ip link set dev $rp2 down
169
170 tc qdisc del dev $rp1 clsact
171 __addr_add_del $rp1 del 192.0.2.2/28
172 ip link set dev $rp1 down
173}
174
175setup_prepare()
176{
177 h1=${NETIFS[p1]}
178 rp1=${NETIFS[p2]}
179 rp2=${NETIFS[p3]}
180 h2=${NETIFS[p4]}
181 h3=${NETIFS[p5]}
182 rp3=${NETIFS[p6]}
183 h4=${NETIFS[p7]}
184 rp4=${NETIFS[p8]}
185
186 vrf_prepare
187
188 h1_create
189 h2_create
190 h3_create
191 h4_create
192 router_create
193}
194
195cleanup()
196{
197 pre_cleanup
198
199 rm -f $CAPTURE_FILE
200
201 router_destroy
202 h4_destroy
203 h3_destroy
204 h2_destroy
205 h1_destroy
206
207 vrf_cleanup
208}
209
210psample_capture_start()
211{
212 rm -f $CAPTURE_FILE
213
214 psample &> $CAPTURE_FILE &
215
216 sleep 1
217}
218
219psample_capture_stop()
220{
221 { kill %% && wait %%; } 2>/dev/null
222}
223
224__tc_sample_rate_test()
225{
226 local desc=$1; shift
227 local dip=$1; shift
228 local pkts pct
229
230 RET=0
231
232 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
233 skip_sw action sample rate 32 group 1
234 check_err $? "Failed to configure sampling rule"
235
236 psample_capture_start
237
238 ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
239 -B $dip -t udp dp=52768,sp=42768 -q
240
241 psample_capture_stop
242
243 pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
244 pct=$((100 * (pkts - 10000) / 10000))
245 (( -25 <= pct && pct <= 25))
246 check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
247
248 log_test "tc sample rate ($desc)"
249
250 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
251}
252
253tc_sample_rate_test()
254{
255 __tc_sample_rate_test "forward" 198.51.100.1
256 __tc_sample_rate_test "local receive" 192.0.2.2
257}
258
259tc_sample_max_rate_test()
260{
261 RET=0
262
263 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
264 skip_sw action sample rate $((35 * 10 ** 8)) group 1
265 check_err $? "Failed to configure sampling rule with max rate"
266
267 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
268
269 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
270 skip_sw action sample rate $((35 * 10 ** 8 + 1)) \
271 group 1 &> /dev/null
272 check_fail $? "Managed to configure sampling rate above maximum"
273
274 log_test "tc sample maximum rate"
275}
276
277tc_sample_conflict_test()
278{
279 RET=0
280
281 # Test that two sampling rules cannot be configured on the same port,
282 # even when they share the same parameters.
283
284 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
285 skip_sw action sample rate 1024 group 1
286 check_err $? "Failed to configure sampling rule"
287
288 tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
289 skip_sw action sample rate 1024 group 1 &> /dev/null
290 check_fail $? "Managed to configure second sampling rule"
291
292 # Delete the first rule and make sure the second rule can now be
293 # configured.
294
295 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
296
297 tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
298 skip_sw action sample rate 1024 group 1
299 check_err $? "Failed to configure sampling rule after deletion"
300
301 log_test "tc sample conflict test"
302
303 tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall
304}
305
306tc_sample_group_conflict_test()
307{
308 RET=0
309
310 # Test that two sampling rules cannot be configured on the same port
311 # with different groups.
312
313 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
314 skip_sw action sample rate 1024 group 1
315 check_err $? "Failed to configure sampling rule"
316
317 tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
318 skip_sw action sample rate 1024 group 2 &> /dev/null
319 check_fail $? "Managed to configure sampling rule with conflicting group"
320
321 log_test "tc sample group conflict test"
322
323 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
324}
325
326tc_sample_md_iif_test()
327{
328 local rp1_ifindex
329
330 RET=0
331
332 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
333 skip_sw action sample rate 5 group 1
334 check_err $? "Failed to configure sampling rule"
335
336 psample_capture_start
337
338 ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
339 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
340
341 psample_capture_stop
342
343 rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]')
344 grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE
345 check_err $? "Sampled packets do not have expected in-ifindex"
346
347 log_test "tc sample iif"
348
349 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
350}
351
352tc_sample_md_lag_iif_test()
353{
354 local rp3_ifindex
355
356 RET=0
357
358 tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
359 skip_sw action sample rate 5 group 1
360 check_err $? "Failed to configure sampling rule"
361
362 psample_capture_start
363
364 ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
365 -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
366
367 psample_capture_stop
368
369 rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]')
370 grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE
371 check_err $? "Sampled packets do not have expected in-ifindex"
372
373 log_test "tc sample lag iif"
374
375 tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
376}
377
378tc_sample_md_oif_test()
379{
380 local rp2_ifindex
381
382 RET=0
383
384 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
385 skip_sw action sample rate 5 group 1
386 check_err $? "Failed to configure sampling rule"
387
388 psample_capture_start
389
390 ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
391 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
392
393 psample_capture_stop
394
395 rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]')
396 grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE
397 check_err $? "Sampled packets do not have expected out-ifindex"
398
399 log_test "tc sample oif"
400
401 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
402}
403
404tc_sample_md_lag_oif_test()
405{
406 local rp4_ifindex
407
408 RET=0
409
410 tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
411 skip_sw action sample rate 5 group 1
412 check_err $? "Failed to configure sampling rule"
413
414 psample_capture_start
415
416 ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
417 -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
418
419 psample_capture_stop
420
421 rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]')
422 grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE
423 check_err $? "Sampled packets do not have expected out-ifindex"
424
425 log_test "tc sample lag oif"
426
427 tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
428}
429
430tc_sample_md_out_tc_test()
431{
432 RET=0
433
434 # Output traffic class is not supported on Spectrum-1.
435 mlxsw_only_on_spectrum 2+ || return
436
437 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
438 skip_sw action sample rate 5 group 1
439 check_err $? "Failed to configure sampling rule"
440
441 # By default, all the packets should go to the same traffic class (0).
442
443 psample_capture_start
444
445 ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
446 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
447
448 psample_capture_stop
449
450 grep -q -e "out-tc 0 " $CAPTURE_FILE
451 check_err $? "Sampled packets do not have expected out-tc (0)"
452
453 # Map all priorities to highest traffic class (7) and check reported
454 # out-tc.
455 tc qdisc replace dev $rp2 root handle 1: \
456 prio bands 3 priomap 0 0 0 0 0 0 0 0
457
458 psample_capture_start
459
460 ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
461 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
462
463 psample_capture_stop
464
465 grep -q -e "out-tc 7 " $CAPTURE_FILE
466 check_err $? "Sampled packets do not have expected out-tc (7)"
467
468 log_test "tc sample out-tc"
469
470 tc qdisc del dev $rp2 root handle 1:
471 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
472}
473
474tc_sample_md_out_tc_occ_test()
475{
476 local backlog pct occ
477
478 RET=0
479
480 # Output traffic class occupancy is not supported on Spectrum-1.
481 mlxsw_only_on_spectrum 2+ || return
482
483 tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
484 skip_sw action sample rate 1024 group 1
485 check_err $? "Failed to configure sampling rule"
486
487 # Configure a shaper on egress to create congestion.
488 tc qdisc replace dev $rp2 root handle 1: \
489 tbf rate 1Mbit burst 256k limit 1M
490
491 psample_capture_start
492
493 ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \
494 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q &
495
496 # Allow congestion to reach steady state.
497 sleep 10
498
499 backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]')
500
501 # Kill mausezahn.
502 { kill %% && wait %%; } 2>/dev/null
503
504 psample_capture_stop
505
506 # Record last congestion sample.
507 occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \
508 cut -d ' ' -f 16)
509
510 pct=$((100 * (occ - backlog) / backlog))
511 (( -1 <= pct && pct <= 1))
512 check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%"
513
514 log_test "tc sample out-tc-occ"
515
516 tc qdisc del dev $rp2 root handle 1:
517 tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
518}
519
520tc_sample_md_latency_test()
521{
522 RET=0
523
524 # Egress sampling not supported on Spectrum-1.
525 mlxsw_only_on_spectrum 2+ || return
526
527 tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \
528 skip_sw action sample rate 5 group 1
529 check_err $? "Failed to configure sampling rule"
530
531 psample_capture_start
532
533 ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
534 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
535
536 psample_capture_stop
537
538 grep -q -e "latency " $CAPTURE_FILE
539 check_err $? "Sampled packets do not have latency attribute"
540
541 log_test "tc sample latency"
542
543 tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall
544}
545
546tc_sample_acl_group_conflict_test()
547{
548 RET=0
549
550 # Test that two flower sampling rules cannot be configured on the same
551 # port with different groups.
552
553 # Policy-based sampling is not supported on Spectrum-1.
554 mlxsw_only_on_spectrum 2+ || return
555
556 tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
557 skip_sw action sample rate 1024 group 1
558 check_err $? "Failed to configure sampling rule"
559
560 tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \
561 skip_sw action sample rate 1024 group 1
562 check_err $? "Failed to configure sampling rule with same group"
563
564 tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \
565 skip_sw action sample rate 1024 group 2 &> /dev/null
566 check_fail $? "Managed to configure sampling rule with conflicting group"
567
568 log_test "tc sample (w/ flower) group conflict test"
569
570 tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower
571 tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
572}
573
574__tc_sample_acl_rate_test()
575{
576 local bind=$1; shift
577 local port=$1; shift
578 local pkts pct
579
580 RET=0
581
582 # Policy-based sampling is not supported on Spectrum-1.
583 mlxsw_only_on_spectrum 2+ || return
584
585 tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \
586 skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1
587 check_err $? "Failed to configure sampling rule"
588
589 psample_capture_start
590
591 ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
592 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
593
594 psample_capture_stop
595
596 pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
597 pct=$((100 * (pkts - 10000) / 10000))
598 (( -25 <= pct && pct <= 25))
599 check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
600
601 # Setup a filter that should not match any packet and make sure packets
602 # are not sampled.
603 tc filter del dev $port $bind protocol ip pref 1 handle 101 flower
604
605 tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \
606 skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1
607 check_err $? "Failed to configure sampling rule"
608
609 psample_capture_start
610
611 ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
612 -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
613
614 psample_capture_stop
615
616 grep -q -e "group 1 " $CAPTURE_FILE
617 check_fail $? "Sampled packets when should not"
618
619 log_test "tc sample (w/ flower) rate ($bind)"
620
621 tc filter del dev $port $bind protocol ip pref 1 handle 101 flower
622}
623
624tc_sample_acl_rate_test()
625{
626 __tc_sample_acl_rate_test ingress $rp1
627 __tc_sample_acl_rate_test egress $rp2
628}
629
630tc_sample_acl_max_rate_test()
631{
632 RET=0
633
634 # Policy-based sampling is not supported on Spectrum-1.
635 mlxsw_only_on_spectrum 2+ || return
636
637 tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
638 skip_sw action sample rate $((2 ** 24 - 1)) group 1
639 check_err $? "Failed to configure sampling rule with max rate"
640
641 tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
642
643 tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
644 skip_sw action sample rate $((2 ** 24)) \
645 group 1 &> /dev/null
646 check_fail $? "Managed to configure sampling rate above maximum"
647
648 log_test "tc sample (w/ flower) maximum rate"
649}
650
651trap cleanup EXIT
652
653setup_prepare
654setup_wait
655
656tests_run
657
658exit $EXIT_STATUS