Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2
3#
4# Light sensors
5#
6# When adding new entries keep the list in alphabetical order
7
8menu "Light sensors"
9
10config ACPI_ALS
11 tristate "ACPI Ambient Light Sensor"
12 depends on ACPI
13 select IIO_BUFFER
14 select IIO_TRIGGERED_BUFFER
15 select IIO_KFIFO_BUF
16 help
17 Say Y here if you want to build a driver for the ACPI0008
18 Ambient Light Sensor.
19
20 To compile this driver as a module, choose M here: the module will
21 be called acpi-als.
22
23config ADJD_S311
24 tristate "ADJD-S311-CR999 digital color sensor"
25 select IIO_BUFFER
26 select IIO_TRIGGERED_BUFFER
27 depends on I2C
28 help
29 If you say yes here you get support for the Avago ADJD-S311-CR999
30 digital color light sensor.
31
32 This driver can also be built as a module. If so, the module
33 will be called adjd_s311.
34
35config ADUX1020
36 tristate "ADUX1020 photometric sensor"
37 select REGMAP_I2C
38 depends on I2C
39 help
40 Say Y here if you want to build a driver for the Analog Devices
41 ADUX1020 photometric sensor.
42
43 To compile this driver as a module, choose M here: the
44 module will be called adux1020.
45
46config AL3010
47 tristate "AL3010 ambient light sensor"
48 depends on I2C
49 help
50 Say Y here if you want to build a driver for the Dyna Image AL3010
51 ambient light sensor.
52
53 To compile this driver as a module, choose M here: the
54 module will be called al3010.
55
56config AL3320A
57 tristate "AL3320A ambient light sensor"
58 depends on I2C
59 help
60 Say Y here if you want to build a driver for the Dyna Image AL3320A
61 ambient light sensor.
62
63 To compile this driver as a module, choose M here: the
64 module will be called al3320a.
65
66config APDS9300
67 tristate "APDS9300 ambient light sensor"
68 depends on I2C
69 help
70 Say Y here if you want to build a driver for the Avago APDS9300
71 ambient light sensor.
72
73 To compile this driver as a module, choose M here: the
74 module will be called apds9300.
75
76config APDS9960
77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
78 select REGMAP_I2C
79 select IIO_BUFFER
80 select IIO_KFIFO_BUF
81 depends on I2C
82 help
83 Say Y here to build I2C interface support for the Avago
84 APDS9960 gesture/RGB/ALS/proximity sensor.
85
86 To compile this driver as a module, choose M here: the
87 module will be called apds9960
88
89config AS73211
90 tristate "AMS AS73211 XYZ color sensor"
91 depends on I2C
92 select IIO_BUFFER
93 select IIO_TRIGGERED_BUFFER
94 help
95 If you say yes here you get support for the AMS AS73211
96 JENCOLOR(R) Digital XYZ Sensor.
97
98 For triggered measurements, you will need an additional trigger driver
99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
100
101 This driver can also be built as a module. If so, the module
102 will be called as73211.
103
104config BH1750
105 tristate "ROHM BH1750 ambient light sensor"
106 depends on I2C
107 help
108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
109 BH1750, BH1751 ambient light sensors.
110
111 To compile this driver as a module, choose M here: the module will
112 be called bh1750.
113
114config BH1780
115 tristate "ROHM BH1780 ambient light sensor"
116 depends on I2C
117 help
118 Say Y here to build support for the ROHM BH1780GLI ambient
119 light sensor.
120
121 To compile this driver as a module, choose M here: the module will
122 be called bh1780.
123
124config CM32181
125 depends on I2C
126 tristate "CM32181 driver"
127 help
128 Say Y here if you use cm32181.
129 This option enables ambient light sensor using
130 Capella cm32181 device driver.
131
132 To compile this driver as a module, choose M here:
133 the module will be called cm32181.
134
135config CM3232
136 depends on I2C
137 tristate "CM3232 ambient light sensor"
138 help
139 Say Y here if you use cm3232.
140 This option enables ambient light sensor using
141 Capella Microsystems cm3232 device driver.
142
143 To compile this driver as a module, choose M here:
144 the module will be called cm3232.
145
146config CM3323
147 depends on I2C
148 tristate "Capella CM3323 color light sensor"
149 help
150 Say Y here if you want to build a driver for Capella CM3323
151 color sensor.
152
153 To compile this driver as a module, choose M here: the module will
154 be called cm3323.
155
156config CM3605
157 tristate "Capella CM3605 ambient light and proximity sensor"
158 depends on OF
159 help
160 Say Y here if you want to build a driver for Capella CM3605
161 ambient light and short range proximity sensor.
162
163 To compile this driver as a module, choose M here: the module will
164 be called cm3605.
165
166config CM36651
167 depends on I2C
168 tristate "CM36651 driver"
169 help
170 Say Y here if you use cm36651.
171 This option enables proximity & RGB sensor using
172 Capella cm36651 device driver.
173
174 To compile this driver as a module, choose M here:
175 the module will be called cm36651.
176
177config IIO_CROS_EC_LIGHT_PROX
178 tristate "ChromeOS EC Light and Proximity Sensors"
179 depends on IIO_CROS_EC_SENSORS_CORE
180 help
181 Say Y here if you use the light and proximity sensors
182 presented by the ChromeOS EC Sensor hub.
183
184 To compile this driver as a module, choose M here:
185 the module will be called cros_ec_light_prox.
186
187config GP2AP002
188 tristate "Sharp GP2AP002 Proximity/ALS sensor"
189 depends on I2C
190 select REGMAP
191 help
192 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip
193 hooked to an I2C bus.
194
195 To compile this driver as a module, choose M here: the
196 module will be called gp2ap002.
197
198config GP2AP020A00F
199 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
200 depends on I2C
201 select REGMAP_I2C
202 select IIO_BUFFER
203 select IIO_TRIGGERED_BUFFER
204 select IRQ_WORK
205 help
206 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
207 hooked to an I2C bus.
208
209 To compile this driver as a module, choose M here: the
210 module will be called gp2ap020a00f.
211
212config IQS621_ALS
213 tristate "Azoteq IQS621/622 ambient light sensors"
214 depends on MFD_IQS62X || COMPILE_TEST
215 help
216 Say Y here if you want to build support for the Azoteq IQS621
217 and IQS622 ambient light sensors.
218
219 To compile this driver as a module, choose M here: the module
220 will be called iqs621-als.
221
222config SENSORS_ISL29018
223 tristate "Intersil 29018 light and proximity sensor"
224 depends on I2C
225 select REGMAP_I2C
226 default n
227 help
228 If you say yes here you get support for ambient light sensing and
229 proximity infrared sensing from Intersil ISL29018.
230 This driver will provide the measurements of ambient light intensity
231 in lux, proximity infrared sensing and normal infrared sensing.
232 Data from sensor is accessible via sysfs.
233
234config SENSORS_ISL29028
235 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
236 depends on I2C
237 select REGMAP_I2C
238 help
239 Provides driver for the Intersil's ISL29028 device.
240 This driver supports the sysfs interface to get the ALS, IR intensity,
241 Proximity value via iio. The ISL29028 provides the concurrent sensing
242 of ambient light and proximity.
243
244config ISL29125
245 tristate "Intersil ISL29125 digital color light sensor"
246 depends on I2C
247 select IIO_BUFFER
248 select IIO_TRIGGERED_BUFFER
249 help
250 Say Y here if you want to build a driver for the Intersil ISL29125
251 RGB light sensor for I2C.
252
253 To compile this driver as a module, choose M here: the module will be
254 called isl29125.
255
256config HID_SENSOR_ALS
257 depends on HID_SENSOR_HUB
258 select IIO_BUFFER
259 select HID_SENSOR_IIO_COMMON
260 select HID_SENSOR_IIO_TRIGGER
261 tristate "HID ALS"
262 help
263 Say yes here to build support for the HID SENSOR
264 Ambient light sensor.
265
266 To compile this driver as a module, choose M here: the
267 module will be called hid-sensor-als.
268
269config HID_SENSOR_PROX
270 depends on HID_SENSOR_HUB
271 select IIO_BUFFER
272 select HID_SENSOR_IIO_COMMON
273 select HID_SENSOR_IIO_TRIGGER
274 tristate "HID PROX"
275 help
276 Say yes here to build support for the HID SENSOR
277 Proximity sensor.
278
279 To compile this driver as a module, choose M here: the
280 module will be called hid-sensor-prox.
281
282config JSA1212
283 tristate "JSA1212 ALS and proximity sensor driver"
284 depends on I2C
285 select REGMAP_I2C
286 help
287 Say Y here if you want to build a IIO driver for JSA1212
288 proximity & ALS sensor device.
289
290 To compile this driver as a module, choose M here:
291 the module will be called jsa1212.
292
293config RPR0521
294 tristate "ROHM RPR0521 ALS and proximity sensor driver"
295 depends on I2C
296 select REGMAP_I2C
297 help
298 Say Y here if you want to build support for ROHM's RPR0521
299 ambient light and proximity sensor device.
300
301 To compile this driver as a module, choose M here:
302 the module will be called rpr0521.
303
304config SENSORS_LM3533
305 tristate "LM3533 ambient light sensor"
306 depends on MFD_LM3533
307 help
308 If you say yes here you get support for the ambient light sensor
309 interface on National Semiconductor / TI LM3533 Lighting Power
310 chips.
311
312 The sensor interface can be used to control the LEDs and backlights
313 of the chip through defining five light zones and three sets of
314 corresponding output-current values.
315
316 The driver provides raw and mean adc readings along with the current
317 light zone through sysfs. A threshold event can be generated on zone
318 changes. The ALS-control output values can be set per zone for the
319 three current output channels.
320
321config LTR501
322 tristate "LTR-501ALS-01 light sensor"
323 depends on I2C
324 select REGMAP_I2C
325 select IIO_BUFFER
326 select IIO_TRIGGERED_BUFFER
327 help
328 If you say yes here you get support for the Lite-On LTR-501ALS-01
329 ambient light and proximity sensor. This driver also supports LTR-559
330 ALS/PS or LTR-301 ALS sensors.
331
332 This driver can also be built as a module. If so, the module
333 will be called ltr501.
334
335config LV0104CS
336 tristate "LV0104CS Ambient Light Sensor"
337 depends on I2C
338 help
339 Say Y here if you want to build support for the On Semiconductor
340 LV0104CS ambient light sensor.
341
342 To compile this driver as a module, choose M here:
343 the module will be called lv0104cs.
344
345config MAX44000
346 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
347 depends on I2C
348 select REGMAP_I2C
349 select IIO_BUFFER
350 select IIO_TRIGGERED_BUFFER
351 help
352 Say Y here if you want to build support for Maxim Integrated's
353 MAX44000 ambient and infrared proximity sensor device.
354
355 To compile this driver as a module, choose M here:
356 the module will be called max44000.
357
358config MAX44009
359 tristate "MAX44009 Ambient Light Sensor"
360 depends on I2C
361 select REGMAP_I2C
362 help
363 Say Y here if you want to build support for Maxim Integrated's
364 MAX44009 ambient light sensor device.
365
366 To compile this driver as a module, choose M here:
367 the module will be called max44009.
368
369config NOA1305
370 tristate "ON Semiconductor NOA1305 ambient light sensor"
371 depends on I2C
372 select REGMAP_I2C
373 help
374 Say Y here if you want to build support for the ON Semiconductor
375 NOA1305 ambient light sensor.
376
377 To compile this driver as a module, choose M here:
378 The module will be called noa1305.
379
380config OPT3001
381 tristate "Texas Instruments OPT3001 Light Sensor"
382 depends on I2C
383 help
384 If you say Y or M here, you get support for Texas Instruments
385 OPT3001 Ambient Light Sensor.
386
387 If built as a dynamically linked module, it will be called
388 opt3001.
389
390config PA12203001
391 tristate "TXC PA12203001 light and proximity sensor"
392 depends on I2C
393 select REGMAP_I2C
394 help
395 If you say yes here you get support for the TXC PA12203001
396 ambient light and proximity sensor.
397
398 This driver can also be built as a module. If so, the module
399 will be called pa12203001.
400
401config SI1133
402 tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
403 depends on I2C
404 select REGMAP_I2C
405 help
406 Say Y here if you want to build a driver for the Silicon Labs SI1133
407 UV Index Sensor and Ambient Light Sensor chip.
408
409 To compile this driver as a module, choose M here: the module will be
410 called si1133.
411
412config SI1145
413 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
414 depends on I2C
415 select IIO_BUFFER
416 select IIO_TRIGGERED_BUFFER
417 help
418 Say Y here if you want to build a driver for the Silicon Labs SI1132 or
419 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
420 chips.
421
422 To compile this driver as a module, choose M here: the module will be
423 called si1145.
424
425config STK3310
426 tristate "STK3310 ALS and proximity sensor"
427 depends on I2C
428 select REGMAP_I2C
429 help
430 Say yes here to get support for the Sensortek STK3310 ambient light
431 and proximity sensor. The STK3311 model is also supported by this
432 driver.
433
434 Choosing M will build the driver as a module. If so, the module
435 will be called stk3310.
436
437config ST_UVIS25
438 tristate "STMicroelectronics UVIS25 sensor driver"
439 depends on (I2C || SPI)
440 select IIO_BUFFER
441 select IIO_TRIGGERED_BUFFER
442 select ST_UVIS25_I2C if (I2C)
443 select ST_UVIS25_SPI if (SPI_MASTER)
444 help
445 Say yes here to build support for STMicroelectronics UVIS25
446 uv sensor
447
448 To compile this driver as a module, choose M here: the module
449 will be called st_uvis25.
450
451config ST_UVIS25_I2C
452 tristate
453 depends on ST_UVIS25
454 select REGMAP_I2C
455
456config ST_UVIS25_SPI
457 tristate
458 depends on ST_UVIS25
459 select REGMAP_SPI
460
461config TCS3414
462 tristate "TAOS TCS3414 digital color sensor"
463 depends on I2C
464 select IIO_BUFFER
465 select IIO_TRIGGERED_BUFFER
466 help
467 If you say yes here you get support for the TAOS TCS3414
468 family of digital color sensors.
469
470 This driver can also be built as a module. If so, the module
471 will be called tcs3414.
472
473config TCS3472
474 tristate "TAOS TCS3472 color light-to-digital converter"
475 depends on I2C
476 select IIO_BUFFER
477 select IIO_TRIGGERED_BUFFER
478 help
479 If you say yes here you get support for the TAOS TCS3472
480 family of color light-to-digital converters with IR filter.
481
482 This driver can also be built as a module. If so, the module
483 will be called tcs3472.
484
485config SENSORS_TSL2563
486 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
487 depends on I2C
488 help
489 If you say yes here you get support for the Taos TSL2560,
490 TSL2561, TSL2562 and TSL2563 ambient light sensors.
491
492 This driver can also be built as a module. If so, the module
493 will be called tsl2563.
494
495config TSL2583
496 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
497 depends on I2C
498 help
499 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
500 Access ALS data via iio, sysfs.
501
502config TSL2591
503 tristate "TAOS TSL2591 ambient light sensor"
504 depends on I2C
505 help
506 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
507 featuring channels for combined visible + IR intensity and lux illuminance.
508 Access data via iio and sysfs. Supports iio_events.
509
510 To compile this driver as a module, select M: the
511 module will be called tsl2591.
512
513config TSL2772
514 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
515 depends on I2C
516 help
517 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
518 tmd2672, tsl2772, tmd2772 devices.
519 Provides iio_events and direct access via sysfs.
520
521config TSL4531
522 tristate "TAOS TSL4531 ambient light sensors"
523 depends on I2C
524 help
525 Say Y here if you want to build a driver for the TAOS TSL4531 family
526 of ambient light sensors with direct lux output.
527
528 To compile this driver as a module, choose M here: the
529 module will be called tsl4531.
530
531config US5182D
532 tristate "UPISEMI light and proximity sensor"
533 depends on I2C
534 help
535 If you say yes here you get support for the UPISEMI US5182D
536 ambient light and proximity sensor.
537
538 This driver can also be built as a module. If so, the module
539 will be called us5182d.
540
541config VCNL4000
542 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
543 select IIO_BUFFER
544 select IIO_TRIGGERED_BUFFER
545 depends on I2C
546 help
547 Say Y here if you want to build a driver for the Vishay VCNL4000,
548 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
549 sensor.
550
551 To compile this driver as a module, choose M here: the
552 module will be called vcnl4000.
553
554config VCNL4035
555 tristate "VCNL4035 combined ALS and proximity sensor"
556 select IIO_BUFFER
557 select IIO_TRIGGERED_BUFFER
558 select REGMAP_I2C
559 depends on I2C
560 help
561 Say Y here if you want to build a driver for the Vishay VCNL4035,
562 combined ambient light (ALS) and proximity sensor. Currently only ALS
563 function is available.
564
565 To compile this driver as a module, choose M here: the
566 module will be called vcnl4035.
567
568config VEML6030
569 tristate "VEML6030 ambient light sensor"
570 select REGMAP_I2C
571 depends on I2C
572 help
573 Say Y here if you want to build a driver for the Vishay VEML6030
574 ambient light sensor (ALS).
575
576 To compile this driver as a module, choose M here: the
577 module will be called veml6030.
578
579config VEML6070
580 tristate "VEML6070 UV A light sensor"
581 depends on I2C
582 help
583 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
584 light sensor.
585
586 To compile this driver as a module, choose M here: the
587 module will be called veml6070.
588
589config VL6180
590 tristate "VL6180 ALS, range and proximity sensor"
591 depends on I2C
592 help
593 Say Y here if you want to build a driver for the STMicroelectronics
594 VL6180 combined ambient light, range and proximity sensor.
595
596 To compile this driver as a module, choose M here: the
597 module will be called vl6180.
598
599config ZOPT2201
600 tristate "ZOPT2201 ALS and UV B sensor"
601 depends on I2C
602 help
603 Say Y here if you want to build a driver for the IDT
604 ZOPT2201 ambient light and UV B sensor.
605
606 To compile this driver as a module, choose M here: the
607 module will be called zopt2201.
608
609endmenu