at v5.13 152 lines 3.7 kB view raw
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * INET An implementation of the TCP/IP protocol suite for the LINUX 4 * operating system. INET is implemented using the BSD Socket 5 * interface as the means of communication with the user level. 6 * 7 * Holds initial configuration information for devices. 8 * 9 * Version: @(#)Space.c 1.0.7 08/12/93 10 * 11 * Authors: Ross Biro 12 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> 13 * Donald J. Becker, <becker@scyld.com> 14 * 15 * Changelog: 16 * Stephen Hemminger (09/2003) 17 * - get rid of pre-linked dev list, dynamic device allocation 18 * Paul Gortmaker (03/2002) 19 * - struct init cleanup, enable multiple ISA autoprobes. 20 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999 21 * - fix sbni: s/device/net_device/ 22 * Paul Gortmaker (06/98): 23 * - sort probes in a sane way, make sure all (safe) probes 24 * get run once & failed autoprobes don't autoprobe again. 25 */ 26#include <linux/netdevice.h> 27#include <linux/etherdevice.h> 28#include <linux/errno.h> 29#include <linux/init.h> 30#include <linux/netlink.h> 31#include <net/Space.h> 32 33/* A unified ethernet device probe. This is the easiest way to have every 34 * ethernet adaptor have the name "eth[0123...]". 35 */ 36 37struct devprobe2 { 38 struct net_device *(*probe)(int unit); 39 int status; /* non-zero if autoprobe has failed */ 40}; 41 42static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe) 43{ 44 struct net_device *dev; 45 46 for (; p->probe; p++) { 47 if (autoprobe && p->status) 48 continue; 49 dev = p->probe(unit); 50 if (!IS_ERR(dev)) 51 return 0; 52 if (autoprobe) 53 p->status = PTR_ERR(dev); 54 } 55 return -ENODEV; 56} 57 58/* ISA probes that touch addresses < 0x400 (including those that also 59 * look for EISA/PCI cards in addition to ISA cards). 60 */ 61static struct devprobe2 isa_probes[] __initdata = { 62#ifdef CONFIG_3C515 63 {tc515_probe, 0}, 64#endif 65#ifdef CONFIG_ULTRA 66 {ultra_probe, 0}, 67#endif 68#ifdef CONFIG_WD80x3 69 {wd_probe, 0}, 70#endif 71#if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */ 72 {ne_probe, 0}, 73#endif 74#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */ 75 {lance_probe, 0}, 76#endif 77#ifdef CONFIG_SMC9194 78 {smc_init, 0}, 79#endif 80#ifdef CONFIG_CS89x0 81#ifndef CONFIG_CS89x0_PLATFORM 82 {cs89x0_probe, 0}, 83#endif 84#endif 85#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel */ 86 {i82596_probe, 0}, /* I82596 */ 87#endif 88#ifdef CONFIG_NI65 89 {ni65_probe, 0}, 90#endif 91 {NULL, 0}, 92}; 93 94static struct devprobe2 m68k_probes[] __initdata = { 95#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */ 96 {atarilance_probe, 0}, 97#endif 98#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */ 99 {sun3lance_probe, 0}, 100#endif 101#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */ 102 {sun3_82586_probe, 0}, 103#endif 104#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */ 105 {apne_probe, 0}, 106#endif 107#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */ 108 {mvme147lance_probe, 0}, 109#endif 110 {NULL, 0}, 111}; 112 113/* Unified ethernet device probe, segmented per architecture and 114 * per bus interface. This drives the legacy devices only for now. 115 */ 116 117static void __init ethif_probe2(int unit) 118{ 119 unsigned long base_addr = netdev_boot_base("eth", unit); 120 121 if (base_addr == 1) 122 return; 123 124 (void)(probe_list2(unit, m68k_probes, base_addr == 0) && 125 probe_list2(unit, isa_probes, base_addr == 0)); 126} 127 128/* Statically configured drivers -- order matters here. */ 129static int __init net_olddevs_init(void) 130{ 131 int num; 132 133#ifdef CONFIG_SBNI 134 for (num = 0; num < 8; ++num) 135 sbni_probe(num); 136#endif 137 for (num = 0; num < 8; ++num) 138 ethif_probe2(num); 139 140#ifdef CONFIG_COPS 141 cops_probe(0); 142 cops_probe(1); 143 cops_probe(2); 144#endif 145#ifdef CONFIG_LTPC 146 ltpc_probe(); 147#endif 148 149 return 0; 150} 151 152device_initcall(net_olddevs_init);