at v5.11 12 kB view raw
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * linux/mdio.h: definitions for MDIO (clause 45) transceivers 4 * Copyright 2006-2009 Solarflare Communications Inc. 5 */ 6#ifndef __LINUX_MDIO_H__ 7#define __LINUX_MDIO_H__ 8 9#include <uapi/linux/mdio.h> 10#include <linux/mod_devicetable.h> 11 12/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit 13 * IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. 14 */ 15#define MII_ADDR_C45 (1<<30) 16#define MII_DEVADDR_C45_SHIFT 16 17#define MII_REGADDR_C45_MASK GENMASK(15, 0) 18 19struct gpio_desc; 20struct mii_bus; 21struct reset_control; 22 23/* Multiple levels of nesting are possible. However typically this is 24 * limited to nested DSA like layer, a MUX layer, and the normal 25 * user. Instead of trying to handle the general case, just define 26 * these cases. 27 */ 28enum mdio_mutex_lock_class { 29 MDIO_MUTEX_NORMAL, 30 MDIO_MUTEX_MUX, 31 MDIO_MUTEX_NESTED, 32}; 33 34struct mdio_device { 35 struct device dev; 36 37 struct mii_bus *bus; 38 char modalias[MDIO_NAME_SIZE]; 39 40 int (*bus_match)(struct device *dev, struct device_driver *drv); 41 void (*device_free)(struct mdio_device *mdiodev); 42 void (*device_remove)(struct mdio_device *mdiodev); 43 44 /* Bus address of the MDIO device (0-31) */ 45 int addr; 46 int flags; 47 struct gpio_desc *reset_gpio; 48 struct reset_control *reset_ctrl; 49 unsigned int reset_assert_delay; 50 unsigned int reset_deassert_delay; 51}; 52#define to_mdio_device(d) container_of(d, struct mdio_device, dev) 53 54/* struct mdio_driver_common: Common to all MDIO drivers */ 55struct mdio_driver_common { 56 struct device_driver driver; 57 int flags; 58}; 59#define MDIO_DEVICE_FLAG_PHY 1 60#define to_mdio_common_driver(d) \ 61 container_of(d, struct mdio_driver_common, driver) 62 63/* struct mdio_driver: Generic MDIO driver */ 64struct mdio_driver { 65 struct mdio_driver_common mdiodrv; 66 67 /* 68 * Called during discovery. Used to set 69 * up device-specific structures, if any 70 */ 71 int (*probe)(struct mdio_device *mdiodev); 72 73 /* Clears up any memory if needed */ 74 void (*remove)(struct mdio_device *mdiodev); 75}; 76#define to_mdio_driver(d) \ 77 container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv) 78 79/* device driver data */ 80static inline void mdiodev_set_drvdata(struct mdio_device *mdio, void *data) 81{ 82 dev_set_drvdata(&mdio->dev, data); 83} 84 85static inline void *mdiodev_get_drvdata(struct mdio_device *mdio) 86{ 87 return dev_get_drvdata(&mdio->dev); 88} 89 90void mdio_device_free(struct mdio_device *mdiodev); 91struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr); 92int mdio_device_register(struct mdio_device *mdiodev); 93void mdio_device_remove(struct mdio_device *mdiodev); 94void mdio_device_reset(struct mdio_device *mdiodev, int value); 95int mdio_driver_register(struct mdio_driver *drv); 96void mdio_driver_unregister(struct mdio_driver *drv); 97int mdio_device_bus_match(struct device *dev, struct device_driver *drv); 98 99static inline bool mdio_phy_id_is_c45(int phy_id) 100{ 101 return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK); 102} 103 104static inline __u16 mdio_phy_id_prtad(int phy_id) 105{ 106 return (phy_id & MDIO_PHY_ID_PRTAD) >> 5; 107} 108 109static inline __u16 mdio_phy_id_devad(int phy_id) 110{ 111 return phy_id & MDIO_PHY_ID_DEVAD; 112} 113 114/** 115 * struct mdio_if_info - Ethernet controller MDIO interface 116 * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown) 117 * @mmds: Mask of MMDs expected to be present in the PHY. This must be 118 * non-zero unless @prtad = %MDIO_PRTAD_NONE. 119 * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then 120 * MII register access will be passed through with @devad = 121 * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to 122 * commonly used clause 22 registers will be translated into 123 * clause 45 registers. 124 * @dev: Net device structure 125 * @mdio_read: Register read function; returns value or negative error code 126 * @mdio_write: Register write function; returns 0 or negative error code 127 */ 128struct mdio_if_info { 129 int prtad; 130 u32 mmds; 131 unsigned mode_support; 132 133 struct net_device *dev; 134 int (*mdio_read)(struct net_device *dev, int prtad, int devad, 135 u16 addr); 136 int (*mdio_write)(struct net_device *dev, int prtad, int devad, 137 u16 addr, u16 val); 138}; 139 140#define MDIO_PRTAD_NONE (-1) 141#define MDIO_DEVAD_NONE (-1) 142#define MDIO_SUPPORTS_C22 1 143#define MDIO_SUPPORTS_C45 2 144#define MDIO_EMULATE_C22 4 145 146struct ethtool_cmd; 147struct ethtool_pauseparam; 148extern int mdio45_probe(struct mdio_if_info *mdio, int prtad); 149extern int mdio_set_flag(const struct mdio_if_info *mdio, 150 int prtad, int devad, u16 addr, int mask, 151 bool sense); 152extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds); 153extern int mdio45_nway_restart(const struct mdio_if_info *mdio); 154extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, 155 struct ethtool_cmd *ecmd, 156 u32 npage_adv, u32 npage_lpa); 157extern void 158mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio, 159 struct ethtool_link_ksettings *cmd, 160 u32 npage_adv, u32 npage_lpa); 161 162/** 163 * mdio45_ethtool_gset - get settings for ETHTOOL_GSET 164 * @mdio: MDIO interface 165 * @ecmd: Ethtool request structure 166 * 167 * Since the CSRs for auto-negotiation using next pages are not fully 168 * standardised, this function does not attempt to decode them. Use 169 * mdio45_ethtool_gset_npage() to specify advertisement bits from next 170 * pages. 171 */ 172static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio, 173 struct ethtool_cmd *ecmd) 174{ 175 mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0); 176} 177 178/** 179 * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS 180 * @mdio: MDIO interface 181 * @cmd: Ethtool request structure 182 * 183 * Since the CSRs for auto-negotiation using next pages are not fully 184 * standardised, this function does not attempt to decode them. Use 185 * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits 186 * from next pages. 187 */ 188static inline void 189mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio, 190 struct ethtool_link_ksettings *cmd) 191{ 192 mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0); 193} 194 195extern int mdio_mii_ioctl(const struct mdio_if_info *mdio, 196 struct mii_ioctl_data *mii_data, int cmd); 197 198/** 199 * mmd_eee_cap_to_ethtool_sup_t 200 * @eee_cap: value of the MMD EEE Capability register 201 * 202 * A small helper function that translates MMD EEE Capability (3.20) bits 203 * to ethtool supported settings. 204 */ 205static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap) 206{ 207 u32 supported = 0; 208 209 if (eee_cap & MDIO_EEE_100TX) 210 supported |= SUPPORTED_100baseT_Full; 211 if (eee_cap & MDIO_EEE_1000T) 212 supported |= SUPPORTED_1000baseT_Full; 213 if (eee_cap & MDIO_EEE_10GT) 214 supported |= SUPPORTED_10000baseT_Full; 215 if (eee_cap & MDIO_EEE_1000KX) 216 supported |= SUPPORTED_1000baseKX_Full; 217 if (eee_cap & MDIO_EEE_10GKX4) 218 supported |= SUPPORTED_10000baseKX4_Full; 219 if (eee_cap & MDIO_EEE_10GKR) 220 supported |= SUPPORTED_10000baseKR_Full; 221 222 return supported; 223} 224 225/** 226 * mmd_eee_adv_to_ethtool_adv_t 227 * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers 228 * 229 * A small helper function that translates the MMD EEE Advertisment (7.60) 230 * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement 231 * settings. 232 */ 233static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv) 234{ 235 u32 adv = 0; 236 237 if (eee_adv & MDIO_EEE_100TX) 238 adv |= ADVERTISED_100baseT_Full; 239 if (eee_adv & MDIO_EEE_1000T) 240 adv |= ADVERTISED_1000baseT_Full; 241 if (eee_adv & MDIO_EEE_10GT) 242 adv |= ADVERTISED_10000baseT_Full; 243 if (eee_adv & MDIO_EEE_1000KX) 244 adv |= ADVERTISED_1000baseKX_Full; 245 if (eee_adv & MDIO_EEE_10GKX4) 246 adv |= ADVERTISED_10000baseKX4_Full; 247 if (eee_adv & MDIO_EEE_10GKR) 248 adv |= ADVERTISED_10000baseKR_Full; 249 250 return adv; 251} 252 253/** 254 * ethtool_adv_to_mmd_eee_adv_t 255 * @adv: the ethtool advertisement settings 256 * 257 * A small helper function that translates ethtool advertisement settings 258 * to EEE advertisements for the MMD EEE Advertisement (7.60) and 259 * MMD EEE Link Partner Ability (7.61) registers. 260 */ 261static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv) 262{ 263 u16 reg = 0; 264 265 if (adv & ADVERTISED_100baseT_Full) 266 reg |= MDIO_EEE_100TX; 267 if (adv & ADVERTISED_1000baseT_Full) 268 reg |= MDIO_EEE_1000T; 269 if (adv & ADVERTISED_10000baseT_Full) 270 reg |= MDIO_EEE_10GT; 271 if (adv & ADVERTISED_1000baseKX_Full) 272 reg |= MDIO_EEE_1000KX; 273 if (adv & ADVERTISED_10000baseKX4_Full) 274 reg |= MDIO_EEE_10GKX4; 275 if (adv & ADVERTISED_10000baseKR_Full) 276 reg |= MDIO_EEE_10GKR; 277 278 return reg; 279} 280 281/** 282 * linkmode_adv_to_mii_10gbt_adv_t 283 * @advertising: the linkmode advertisement settings 284 * 285 * A small helper function that translates linkmode advertisement 286 * settings to phy autonegotiation advertisements for the C45 287 * 10GBASE-T AN CONTROL (7.32) register. 288 */ 289static inline u32 linkmode_adv_to_mii_10gbt_adv_t(unsigned long *advertising) 290{ 291 u32 result = 0; 292 293 if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, 294 advertising)) 295 result |= MDIO_AN_10GBT_CTRL_ADV2_5G; 296 if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, 297 advertising)) 298 result |= MDIO_AN_10GBT_CTRL_ADV5G; 299 if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, 300 advertising)) 301 result |= MDIO_AN_10GBT_CTRL_ADV10G; 302 303 return result; 304} 305 306/** 307 * mii_10gbt_stat_mod_linkmode_lpa_t 308 * @advertising: target the linkmode advertisement settings 309 * @lpa: value of the C45 10GBASE-T AN STATUS register 310 * 311 * A small helper function that translates C45 10GBASE-T AN STATUS register bits 312 * to linkmode advertisement settings. Other bits in advertising aren't changed. 313 */ 314static inline void mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long *advertising, 315 u32 lpa) 316{ 317 linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, 318 advertising, lpa & MDIO_AN_10GBT_STAT_LP2_5G); 319 linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, 320 advertising, lpa & MDIO_AN_10GBT_STAT_LP5G); 321 linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, 322 advertising, lpa & MDIO_AN_10GBT_STAT_LP10G); 323} 324 325int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); 326int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); 327int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum, 328 u16 mask, u16 set); 329 330int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); 331int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum); 332int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); 333int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val); 334int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask, 335 u16 set); 336 337static inline u32 mdiobus_c45_addr(int devad, u16 regnum) 338{ 339 return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum; 340} 341 342static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad, 343 u16 regnum) 344{ 345 return __mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum)); 346} 347 348static inline int __mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad, 349 u16 regnum, u16 val) 350{ 351 return __mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), 352 val); 353} 354 355static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad, 356 u16 regnum) 357{ 358 return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum)); 359} 360 361static inline int mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad, 362 u16 regnum, u16 val) 363{ 364 return mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), val); 365} 366 367int mdiobus_register_device(struct mdio_device *mdiodev); 368int mdiobus_unregister_device(struct mdio_device *mdiodev); 369bool mdiobus_is_registered_device(struct mii_bus *bus, int addr); 370struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr); 371 372/** 373 * mdio_module_driver() - Helper macro for registering mdio drivers 374 * @_mdio_driver: driver to register 375 * 376 * Helper macro for MDIO drivers which do not do anything special in module 377 * init/exit. Each module may only use this macro once, and calling it 378 * replaces module_init() and module_exit(). 379 */ 380#define mdio_module_driver(_mdio_driver) \ 381static int __init mdio_module_init(void) \ 382{ \ 383 return mdio_driver_register(&_mdio_driver); \ 384} \ 385module_init(mdio_module_init); \ 386static void __exit mdio_module_exit(void) \ 387{ \ 388 mdio_driver_unregister(&_mdio_driver); \ 389} \ 390module_exit(mdio_module_exit) 391 392#endif /* __LINUX_MDIO_H__ */