at v5.10 17 kB view raw
1/* SPDX-License-Identifier: GPL-2.0 */ 2#ifndef _LINUX_SCATTERLIST_H 3#define _LINUX_SCATTERLIST_H 4 5#include <linux/string.h> 6#include <linux/types.h> 7#include <linux/bug.h> 8#include <linux/mm.h> 9#include <asm/io.h> 10 11struct scatterlist { 12 unsigned long page_link; 13 unsigned int offset; 14 unsigned int length; 15 dma_addr_t dma_address; 16#ifdef CONFIG_NEED_SG_DMA_LENGTH 17 unsigned int dma_length; 18#endif 19}; 20 21/* 22 * Since the above length field is an unsigned int, below we define the maximum 23 * length in bytes that can be stored in one scatterlist entry. 24 */ 25#define SCATTERLIST_MAX_SEGMENT (UINT_MAX & PAGE_MASK) 26 27/* 28 * These macros should be used after a dma_map_sg call has been done 29 * to get bus addresses of each of the SG entries and their lengths. 30 * You should only work with the number of sg entries dma_map_sg 31 * returns, or alternatively stop on the first sg_dma_len(sg) which 32 * is 0. 33 */ 34#define sg_dma_address(sg) ((sg)->dma_address) 35 36#ifdef CONFIG_NEED_SG_DMA_LENGTH 37#define sg_dma_len(sg) ((sg)->dma_length) 38#else 39#define sg_dma_len(sg) ((sg)->length) 40#endif 41 42struct sg_table { 43 struct scatterlist *sgl; /* the list */ 44 unsigned int nents; /* number of mapped entries */ 45 unsigned int orig_nents; /* original size of list */ 46}; 47 48/* 49 * Notes on SG table design. 50 * 51 * We use the unsigned long page_link field in the scatterlist struct to place 52 * the page pointer AND encode information about the sg table as well. The two 53 * lower bits are reserved for this information. 54 * 55 * If bit 0 is set, then the page_link contains a pointer to the next sg 56 * table list. Otherwise the next entry is at sg + 1. 57 * 58 * If bit 1 is set, then this sg entry is the last element in a list. 59 * 60 * See sg_next(). 61 * 62 */ 63 64#define SG_CHAIN 0x01UL 65#define SG_END 0x02UL 66 67/* 68 * We overload the LSB of the page pointer to indicate whether it's 69 * a valid sg entry, or whether it points to the start of a new scatterlist. 70 * Those low bits are there for everyone! (thanks mason :-) 71 */ 72#define sg_is_chain(sg) ((sg)->page_link & SG_CHAIN) 73#define sg_is_last(sg) ((sg)->page_link & SG_END) 74#define sg_chain_ptr(sg) \ 75 ((struct scatterlist *) ((sg)->page_link & ~(SG_CHAIN | SG_END))) 76 77/** 78 * sg_assign_page - Assign a given page to an SG entry 79 * @sg: SG entry 80 * @page: The page 81 * 82 * Description: 83 * Assign page to sg entry. Also see sg_set_page(), the most commonly used 84 * variant. 85 * 86 **/ 87static inline void sg_assign_page(struct scatterlist *sg, struct page *page) 88{ 89 unsigned long page_link = sg->page_link & (SG_CHAIN | SG_END); 90 91 /* 92 * In order for the low bit stealing approach to work, pages 93 * must be aligned at a 32-bit boundary as a minimum. 94 */ 95 BUG_ON((unsigned long) page & (SG_CHAIN | SG_END)); 96#ifdef CONFIG_DEBUG_SG 97 BUG_ON(sg_is_chain(sg)); 98#endif 99 sg->page_link = page_link | (unsigned long) page; 100} 101 102/** 103 * sg_set_page - Set sg entry to point at given page 104 * @sg: SG entry 105 * @page: The page 106 * @len: Length of data 107 * @offset: Offset into page 108 * 109 * Description: 110 * Use this function to set an sg entry pointing at a page, never assign 111 * the page directly. We encode sg table information in the lower bits 112 * of the page pointer. See sg_page() for looking up the page belonging 113 * to an sg entry. 114 * 115 **/ 116static inline void sg_set_page(struct scatterlist *sg, struct page *page, 117 unsigned int len, unsigned int offset) 118{ 119 sg_assign_page(sg, page); 120 sg->offset = offset; 121 sg->length = len; 122} 123 124static inline struct page *sg_page(struct scatterlist *sg) 125{ 126#ifdef CONFIG_DEBUG_SG 127 BUG_ON(sg_is_chain(sg)); 128#endif 129 return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END)); 130} 131 132/** 133 * sg_set_buf - Set sg entry to point at given data 134 * @sg: SG entry 135 * @buf: Data 136 * @buflen: Data length 137 * 138 **/ 139static inline void sg_set_buf(struct scatterlist *sg, const void *buf, 140 unsigned int buflen) 141{ 142#ifdef CONFIG_DEBUG_SG 143 BUG_ON(!virt_addr_valid(buf)); 144#endif 145 sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); 146} 147 148/* 149 * Loop over each sg element, following the pointer to a new list if necessary 150 */ 151#define for_each_sg(sglist, sg, nr, __i) \ 152 for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg)) 153 154/* 155 * Loop over each sg element in the given sg_table object. 156 */ 157#define for_each_sgtable_sg(sgt, sg, i) \ 158 for_each_sg((sgt)->sgl, sg, (sgt)->orig_nents, i) 159 160/* 161 * Loop over each sg element in the given *DMA mapped* sg_table object. 162 * Please use sg_dma_address(sg) and sg_dma_len(sg) to extract DMA addresses 163 * of the each element. 164 */ 165#define for_each_sgtable_dma_sg(sgt, sg, i) \ 166 for_each_sg((sgt)->sgl, sg, (sgt)->nents, i) 167 168static inline void __sg_chain(struct scatterlist *chain_sg, 169 struct scatterlist *sgl) 170{ 171 /* 172 * offset and length are unused for chain entry. Clear them. 173 */ 174 chain_sg->offset = 0; 175 chain_sg->length = 0; 176 177 /* 178 * Set lowest bit to indicate a link pointer, and make sure to clear 179 * the termination bit if it happens to be set. 180 */ 181 chain_sg->page_link = ((unsigned long) sgl | SG_CHAIN) & ~SG_END; 182} 183 184/** 185 * sg_chain - Chain two sglists together 186 * @prv: First scatterlist 187 * @prv_nents: Number of entries in prv 188 * @sgl: Second scatterlist 189 * 190 * Description: 191 * Links @prv@ and @sgl@ together, to form a longer scatterlist. 192 * 193 **/ 194static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, 195 struct scatterlist *sgl) 196{ 197 __sg_chain(&prv[prv_nents - 1], sgl); 198} 199 200/** 201 * sg_mark_end - Mark the end of the scatterlist 202 * @sg: SG entryScatterlist 203 * 204 * Description: 205 * Marks the passed in sg entry as the termination point for the sg 206 * table. A call to sg_next() on this entry will return NULL. 207 * 208 **/ 209static inline void sg_mark_end(struct scatterlist *sg) 210{ 211 /* 212 * Set termination bit, clear potential chain bit 213 */ 214 sg->page_link |= SG_END; 215 sg->page_link &= ~SG_CHAIN; 216} 217 218/** 219 * sg_unmark_end - Undo setting the end of the scatterlist 220 * @sg: SG entryScatterlist 221 * 222 * Description: 223 * Removes the termination marker from the given entry of the scatterlist. 224 * 225 **/ 226static inline void sg_unmark_end(struct scatterlist *sg) 227{ 228 sg->page_link &= ~SG_END; 229} 230 231/** 232 * sg_phys - Return physical address of an sg entry 233 * @sg: SG entry 234 * 235 * Description: 236 * This calls page_to_phys() on the page in this sg entry, and adds the 237 * sg offset. The caller must know that it is legal to call page_to_phys() 238 * on the sg page. 239 * 240 **/ 241static inline dma_addr_t sg_phys(struct scatterlist *sg) 242{ 243 return page_to_phys(sg_page(sg)) + sg->offset; 244} 245 246/** 247 * sg_virt - Return virtual address of an sg entry 248 * @sg: SG entry 249 * 250 * Description: 251 * This calls page_address() on the page in this sg entry, and adds the 252 * sg offset. The caller must know that the sg page has a valid virtual 253 * mapping. 254 * 255 **/ 256static inline void *sg_virt(struct scatterlist *sg) 257{ 258 return page_address(sg_page(sg)) + sg->offset; 259} 260 261/** 262 * sg_init_marker - Initialize markers in sg table 263 * @sgl: The SG table 264 * @nents: Number of entries in table 265 * 266 **/ 267static inline void sg_init_marker(struct scatterlist *sgl, 268 unsigned int nents) 269{ 270 sg_mark_end(&sgl[nents - 1]); 271} 272 273int sg_nents(struct scatterlist *sg); 274int sg_nents_for_len(struct scatterlist *sg, u64 len); 275struct scatterlist *sg_next(struct scatterlist *); 276struct scatterlist *sg_last(struct scatterlist *s, unsigned int); 277void sg_init_table(struct scatterlist *, unsigned int); 278void sg_init_one(struct scatterlist *, const void *, unsigned int); 279int sg_split(struct scatterlist *in, const int in_mapped_nents, 280 const off_t skip, const int nb_splits, 281 const size_t *split_sizes, 282 struct scatterlist **out, int *out_mapped_nents, 283 gfp_t gfp_mask); 284 285typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t); 286typedef void (sg_free_fn)(struct scatterlist *, unsigned int); 287 288void __sg_free_table(struct sg_table *, unsigned int, unsigned int, 289 sg_free_fn *); 290void sg_free_table(struct sg_table *); 291int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, 292 struct scatterlist *, unsigned int, gfp_t, sg_alloc_fn *); 293int sg_alloc_table(struct sg_table *, unsigned int, gfp_t); 294struct scatterlist *__sg_alloc_table_from_pages(struct sg_table *sgt, 295 struct page **pages, unsigned int n_pages, unsigned int offset, 296 unsigned long size, unsigned int max_segment, 297 struct scatterlist *prv, unsigned int left_pages, 298 gfp_t gfp_mask); 299int sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, 300 unsigned int n_pages, unsigned int offset, 301 unsigned long size, gfp_t gfp_mask); 302 303#ifdef CONFIG_SGL_ALLOC 304struct scatterlist *sgl_alloc_order(unsigned long long length, 305 unsigned int order, bool chainable, 306 gfp_t gfp, unsigned int *nent_p); 307struct scatterlist *sgl_alloc(unsigned long long length, gfp_t gfp, 308 unsigned int *nent_p); 309void sgl_free_n_order(struct scatterlist *sgl, int nents, int order); 310void sgl_free_order(struct scatterlist *sgl, int order); 311void sgl_free(struct scatterlist *sgl); 312#endif /* CONFIG_SGL_ALLOC */ 313 314size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf, 315 size_t buflen, off_t skip, bool to_buffer); 316 317size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents, 318 const void *buf, size_t buflen); 319size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, 320 void *buf, size_t buflen); 321 322size_t sg_pcopy_from_buffer(struct scatterlist *sgl, unsigned int nents, 323 const void *buf, size_t buflen, off_t skip); 324size_t sg_pcopy_to_buffer(struct scatterlist *sgl, unsigned int nents, 325 void *buf, size_t buflen, off_t skip); 326size_t sg_zero_buffer(struct scatterlist *sgl, unsigned int nents, 327 size_t buflen, off_t skip); 328 329/* 330 * Maximum number of entries that will be allocated in one piece, if 331 * a list larger than this is required then chaining will be utilized. 332 */ 333#define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist)) 334 335/* 336 * The maximum number of SG segments that we will put inside a 337 * scatterlist (unless chaining is used). Should ideally fit inside a 338 * single page, to avoid a higher order allocation. We could define this 339 * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The 340 * minimum value is 32 341 */ 342#define SG_CHUNK_SIZE 128 343 344/* 345 * Like SG_CHUNK_SIZE, but for archs that have sg chaining. This limit 346 * is totally arbitrary, a setting of 2048 will get you at least 8mb ios. 347 */ 348#ifdef CONFIG_ARCH_NO_SG_CHAIN 349#define SG_MAX_SEGMENTS SG_CHUNK_SIZE 350#else 351#define SG_MAX_SEGMENTS 2048 352#endif 353 354#ifdef CONFIG_SG_POOL 355void sg_free_table_chained(struct sg_table *table, 356 unsigned nents_first_chunk); 357int sg_alloc_table_chained(struct sg_table *table, int nents, 358 struct scatterlist *first_chunk, 359 unsigned nents_first_chunk); 360#endif 361 362/* 363 * sg page iterator 364 * 365 * Iterates over sg entries page-by-page. On each successful iteration, you 366 * can call sg_page_iter_page(@piter) to get the current page. 367 * @piter->sg will point to the sg holding this page and @piter->sg_pgoffset to 368 * the page's page offset within the sg. The iteration will stop either when a 369 * maximum number of sg entries was reached or a terminating sg 370 * (sg_last(sg) == true) was reached. 371 */ 372struct sg_page_iter { 373 struct scatterlist *sg; /* sg holding the page */ 374 unsigned int sg_pgoffset; /* page offset within the sg */ 375 376 /* these are internal states, keep away */ 377 unsigned int __nents; /* remaining sg entries */ 378 int __pg_advance; /* nr pages to advance at the 379 * next step */ 380}; 381 382/* 383 * sg page iterator for DMA addresses 384 * 385 * This is the same as sg_page_iter however you can call 386 * sg_page_iter_dma_address(@dma_iter) to get the page's DMA 387 * address. sg_page_iter_page() cannot be called on this iterator. 388 */ 389struct sg_dma_page_iter { 390 struct sg_page_iter base; 391}; 392 393bool __sg_page_iter_next(struct sg_page_iter *piter); 394bool __sg_page_iter_dma_next(struct sg_dma_page_iter *dma_iter); 395void __sg_page_iter_start(struct sg_page_iter *piter, 396 struct scatterlist *sglist, unsigned int nents, 397 unsigned long pgoffset); 398/** 399 * sg_page_iter_page - get the current page held by the page iterator 400 * @piter: page iterator holding the page 401 */ 402static inline struct page *sg_page_iter_page(struct sg_page_iter *piter) 403{ 404 return nth_page(sg_page(piter->sg), piter->sg_pgoffset); 405} 406 407/** 408 * sg_page_iter_dma_address - get the dma address of the current page held by 409 * the page iterator. 410 * @dma_iter: page iterator holding the page 411 */ 412static inline dma_addr_t 413sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter) 414{ 415 return sg_dma_address(dma_iter->base.sg) + 416 (dma_iter->base.sg_pgoffset << PAGE_SHIFT); 417} 418 419/** 420 * for_each_sg_page - iterate over the pages of the given sg list 421 * @sglist: sglist to iterate over 422 * @piter: page iterator to hold current page, sg, sg_pgoffset 423 * @nents: maximum number of sg entries to iterate over 424 * @pgoffset: starting page offset (in pages) 425 * 426 * Callers may use sg_page_iter_page() to get each page pointer. 427 * In each loop it operates on PAGE_SIZE unit. 428 */ 429#define for_each_sg_page(sglist, piter, nents, pgoffset) \ 430 for (__sg_page_iter_start((piter), (sglist), (nents), (pgoffset)); \ 431 __sg_page_iter_next(piter);) 432 433/** 434 * for_each_sg_dma_page - iterate over the pages of the given sg list 435 * @sglist: sglist to iterate over 436 * @dma_iter: DMA page iterator to hold current page 437 * @dma_nents: maximum number of sg entries to iterate over, this is the value 438 * returned from dma_map_sg 439 * @pgoffset: starting page offset (in pages) 440 * 441 * Callers may use sg_page_iter_dma_address() to get each page's DMA address. 442 * In each loop it operates on PAGE_SIZE unit. 443 */ 444#define for_each_sg_dma_page(sglist, dma_iter, dma_nents, pgoffset) \ 445 for (__sg_page_iter_start(&(dma_iter)->base, sglist, dma_nents, \ 446 pgoffset); \ 447 __sg_page_iter_dma_next(dma_iter);) 448 449/** 450 * for_each_sgtable_page - iterate over all pages in the sg_table object 451 * @sgt: sg_table object to iterate over 452 * @piter: page iterator to hold current page 453 * @pgoffset: starting page offset (in pages) 454 * 455 * Iterates over the all memory pages in the buffer described by 456 * a scatterlist stored in the given sg_table object. 457 * See also for_each_sg_page(). In each loop it operates on PAGE_SIZE unit. 458 */ 459#define for_each_sgtable_page(sgt, piter, pgoffset) \ 460 for_each_sg_page((sgt)->sgl, piter, (sgt)->orig_nents, pgoffset) 461 462/** 463 * for_each_sgtable_dma_page - iterate over the DMA mapped sg_table object 464 * @sgt: sg_table object to iterate over 465 * @dma_iter: DMA page iterator to hold current page 466 * @pgoffset: starting page offset (in pages) 467 * 468 * Iterates over the all DMA mapped pages in the buffer described by 469 * a scatterlist stored in the given sg_table object. 470 * See also for_each_sg_dma_page(). In each loop it operates on PAGE_SIZE 471 * unit. 472 */ 473#define for_each_sgtable_dma_page(sgt, dma_iter, pgoffset) \ 474 for_each_sg_dma_page((sgt)->sgl, dma_iter, (sgt)->nents, pgoffset) 475 476 477/* 478 * Mapping sg iterator 479 * 480 * Iterates over sg entries mapping page-by-page. On each successful 481 * iteration, @miter->page points to the mapped page and 482 * @miter->length bytes of data can be accessed at @miter->addr. As 483 * long as an interation is enclosed between start and stop, the user 484 * is free to choose control structure and when to stop. 485 * 486 * @miter->consumed is set to @miter->length on each iteration. It 487 * can be adjusted if the user can't consume all the bytes in one go. 488 * Also, a stopped iteration can be resumed by calling next on it. 489 * This is useful when iteration needs to release all resources and 490 * continue later (e.g. at the next interrupt). 491 */ 492 493#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */ 494#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */ 495#define SG_MITER_FROM_SG (1 << 2) /* nop */ 496 497struct sg_mapping_iter { 498 /* the following three fields can be accessed directly */ 499 struct page *page; /* currently mapped page */ 500 void *addr; /* pointer to the mapped area */ 501 size_t length; /* length of the mapped area */ 502 size_t consumed; /* number of consumed bytes */ 503 struct sg_page_iter piter; /* page iterator */ 504 505 /* these are internal states, keep away */ 506 unsigned int __offset; /* offset within page */ 507 unsigned int __remaining; /* remaining bytes on page */ 508 unsigned int __flags; 509}; 510 511void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl, 512 unsigned int nents, unsigned int flags); 513bool sg_miter_skip(struct sg_mapping_iter *miter, off_t offset); 514bool sg_miter_next(struct sg_mapping_iter *miter); 515void sg_miter_stop(struct sg_mapping_iter *miter); 516 517#endif /* _LINUX_SCATTERLIST_H */