tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Elantech Touchpad driver (v6)
3 *
4 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 *
10 * Trademarks are the property of their respective owners.
11 */
12
13#ifndef _ELANTECH_H
14#define _ELANTECH_H
15
16/*
17 * Command values for Synaptics style queries
18 */
19#define ETP_FW_ID_QUERY 0x00
20#define ETP_FW_VERSION_QUERY 0x01
21#define ETP_CAPABILITIES_QUERY 0x02
22#define ETP_SAMPLE_QUERY 0x03
23#define ETP_RESOLUTION_QUERY 0x04
24
25/*
26 * Command values for register reading or writing
27 */
28#define ETP_REGISTER_READ 0x10
29#define ETP_REGISTER_WRITE 0x11
30#define ETP_REGISTER_READWRITE 0x00
31
32/*
33 * Hardware version 2 custom PS/2 command value
34 */
35#define ETP_PS2_CUSTOM_COMMAND 0xf8
36
37/*
38 * Times to retry a ps2_command and millisecond delay between tries
39 */
40#define ETP_PS2_COMMAND_TRIES 3
41#define ETP_PS2_COMMAND_DELAY 500
42
43/*
44 * Times to try to read back a register and millisecond delay between tries
45 */
46#define ETP_READ_BACK_TRIES 5
47#define ETP_READ_BACK_DELAY 2000
48
49/*
50 * Register bitmasks for hardware version 1
51 */
52#define ETP_R10_ABSOLUTE_MODE 0x04
53#define ETP_R11_4_BYTE_MODE 0x02
54
55/*
56 * Capability bitmasks
57 */
58#define ETP_CAP_HAS_ROCKER 0x04
59
60/*
61 * One hard to find application note states that X axis range is 0 to 576
62 * and Y axis range is 0 to 384 for harware version 1.
63 * Edge fuzz might be necessary because of bezel around the touchpad
64 */
65#define ETP_EDGE_FUZZ_V1 32
66
67#define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1)
68#define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1)
69#define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1)
70#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1)
71
72/*
73 * The resolution for older v2 hardware doubled.
74 * (newer v2's firmware provides command so we can query)
75 */
76#define ETP_XMIN_V2 0
77#define ETP_XMAX_V2 1152
78#define ETP_YMIN_V2 0
79#define ETP_YMAX_V2 768
80
81#define ETP_PMIN_V2 0
82#define ETP_PMAX_V2 255
83#define ETP_WMIN_V2 0
84#define ETP_WMAX_V2 15
85
86/*
87 * v3 hardware has 2 kinds of packet types,
88 * v4 hardware has 3.
89 */
90#define PACKET_UNKNOWN 0x01
91#define PACKET_DEBOUNCE 0x02
92#define PACKET_V3_HEAD 0x03
93#define PACKET_V3_TAIL 0x04
94#define PACKET_V4_HEAD 0x05
95#define PACKET_V4_MOTION 0x06
96#define PACKET_V4_STATUS 0x07
97#define PACKET_TRACKPOINT 0x08
98
99/*
100 * track up to 5 fingers for v4 hardware
101 */
102#define ETP_MAX_FINGERS 5
103
104/*
105 * weight value for v4 hardware
106 */
107#define ETP_WEIGHT_VALUE 5
108
109/*
110 * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04)
111 */
112#define ETP_BUS_PS2_ONLY 0
113#define ETP_BUS_SMB_ALERT_ONLY 1
114#define ETP_BUS_SMB_HST_NTFY_ONLY 2
115#define ETP_BUS_PS2_SMB_ALERT 3
116#define ETP_BUS_PS2_SMB_HST_NTFY 4
117
118/*
119 * New ICs are either using SMBus Host Notify or just plain PS2.
120 *
121 * ETP_FW_VERSION_QUERY is:
122 * Byte 1:
123 * - bit 0..3: IC BODY
124 * Byte 2:
125 * - bit 4: HiddenButton
126 * - bit 5: PS2_SMBUS_NOTIFY
127 * - bit 6: PS2CRCCheck
128 */
129#define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version) \
130 ((((fw_version) & 0x0f2000) == 0x0f2000) && \
131 ((fw_version) & 0x0000ff) > 0)
132
133/*
134 * The base position for one finger, v4 hardware
135 */
136struct finger_pos {
137 unsigned int x;
138 unsigned int y;
139};
140
141struct elantech_device_info {
142 unsigned char capabilities[3];
143 unsigned char samples[3];
144 unsigned char debug;
145 unsigned char hw_version;
146 unsigned int fw_version;
147 unsigned int x_res;
148 unsigned int y_res;
149 unsigned int bus;
150 bool paritycheck;
151 bool jumpy_cursor;
152 bool reports_pressure;
153 bool crc_enabled;
154 bool set_hw_resolution;
155 bool has_trackpoint;
156 int (*send_cmd)(struct psmouse *psmouse, unsigned char c,
157 unsigned char *param);
158};
159
160struct elantech_data {
161 struct input_dev *tp_dev; /* Relative device for trackpoint */
162 char tp_phys[32];
163 unsigned char reg_07;
164 unsigned char reg_10;
165 unsigned char reg_11;
166 unsigned char reg_20;
167 unsigned char reg_21;
168 unsigned char reg_22;
169 unsigned char reg_23;
170 unsigned char reg_24;
171 unsigned char reg_25;
172 unsigned char reg_26;
173 unsigned int single_finger_reports;
174 unsigned int y_max;
175 unsigned int width;
176 struct finger_pos mt[ETP_MAX_FINGERS];
177 unsigned char parity[256];
178 struct elantech_device_info info;
179 void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
180};
181
182#ifdef CONFIG_MOUSE_PS2_ELANTECH
183int elantech_detect(struct psmouse *psmouse, bool set_properties);
184int elantech_init_ps2(struct psmouse *psmouse);
185int elantech_init(struct psmouse *psmouse);
186#else
187static inline int elantech_detect(struct psmouse *psmouse, bool set_properties)
188{
189 return -ENOSYS;
190}
191static inline int elantech_init(struct psmouse *psmouse)
192{
193 return -ENOSYS;
194}
195static inline int elantech_init_ps2(struct psmouse *psmouse)
196{
197 return -ENOSYS;
198}
199#endif /* CONFIG_MOUSE_PS2_ELANTECH */
200
201#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
202int elantech_init_smbus(struct psmouse *psmouse);
203#else
204static inline int elantech_init_smbus(struct psmouse *psmouse)
205{
206 return -ENOSYS;
207}
208#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
209
210#endif