tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#
2# FDDI network device configuration
3#
4
5config FDDI
6 tristate "FDDI driver support"
7 depends on PCI || EISA || TC
8 ---help---
9 Fiber Distributed Data Interface is a high speed local area network
10 design; essentially a replacement for high speed Ethernet. FDDI can
11 run over copper or fiber. If you are connected to such a network and
12 want a driver for the FDDI card in your computer, say Y here (and
13 then also Y to the driver for your FDDI card, below). Most people
14 will say N.
15
16if FDDI
17
18config DEFZA
19 tristate "DEC FDDIcontroller 700/700-C (DEFZA-xx) support"
20 depends on FDDI && TC
21 help
22 This is support for the DEC FDDIcontroller 700 (DEFZA-AA, fiber)
23 and 700-C (DEFZA-CA, copper) TURBOchannel network cards which
24 can connect you to a local FDDI network.
25
26 To compile this driver as a module, choose M here: the module
27 will be called defza. If unsure, say N.
28
29config DEFXX
30 tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
31 depends on FDDI && (PCI || EISA || TC)
32 ---help---
33 This is support for the DIGITAL series of TURBOchannel (DEFTA),
34 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
35 to a local FDDI network.
36
37 To compile this driver as a module, choose M here: the module
38 will be called defxx. If unsure, say N.
39
40config DEFXX_MMIO
41 bool
42 prompt "Use MMIO instead of PIO" if PCI || EISA
43 depends on DEFXX
44 default n if PCI || EISA
45 default y
46 ---help---
47 This instructs the driver to use EISA or PCI memory-mapped I/O
48 (MMIO) as appropriate instead of programmed I/O ports (PIO).
49 Enabling this gives an improvement in processing time in parts
50 of the driver, but it may cause problems with EISA (DEFEA)
51 adapters. TURBOchannel does not have the concept of I/O ports,
52 so MMIO is always used for these (DEFTA) adapters.
53
54 If unsure, say N.
55
56config SKFP
57 tristate "SysKonnect FDDI PCI support"
58 depends on FDDI && PCI
59 select BITREVERSE
60 ---help---
61 Say Y here if you have a SysKonnect FDDI PCI adapter.
62 The following adapters are supported by this driver:
63 - SK-5521 (SK-NET FDDI-UP)
64 - SK-5522 (SK-NET FDDI-UP DAS)
65 - SK-5541 (SK-NET FDDI-FP)
66 - SK-5543 (SK-NET FDDI-LP)
67 - SK-5544 (SK-NET FDDI-LP DAS)
68 - SK-5821 (SK-NET FDDI-UP64)
69 - SK-5822 (SK-NET FDDI-UP64 DAS)
70 - SK-5841 (SK-NET FDDI-FP64)
71 - SK-5843 (SK-NET FDDI-LP64)
72 - SK-5844 (SK-NET FDDI-LP64 DAS)
73 - Netelligent 100 FDDI DAS Fibre SC
74 - Netelligent 100 FDDI SAS Fibre SC
75 - Netelligent 100 FDDI DAS UTP
76 - Netelligent 100 FDDI SAS UTP
77 - Netelligent 100 FDDI SAS Fibre MIC
78
79 Read <file:Documentation/networking/skfp.txt> for information about
80 the driver.
81
82 Questions concerning this driver can be addressed to:
83 <linux@syskonnect.de>
84
85 To compile this driver as a module, choose M here: the module
86 will be called skfp. This is recommended.
87
88endif # FDDI