at v4.8 5.8 kB view raw
1/* 2 * linux/include/linux/serial_8250.h 3 * 4 * Copyright (C) 2004 Russell King 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 */ 11#ifndef _LINUX_SERIAL_8250_H 12#define _LINUX_SERIAL_8250_H 13 14#include <linux/serial_core.h> 15#include <linux/serial_reg.h> 16#include <linux/platform_device.h> 17 18/* 19 * This is the platform device platform_data structure 20 */ 21struct plat_serial8250_port { 22 unsigned long iobase; /* io base address */ 23 void __iomem *membase; /* ioremap cookie or NULL */ 24 resource_size_t mapbase; /* resource base */ 25 unsigned int irq; /* interrupt number */ 26 unsigned long irqflags; /* request_irq flags */ 27 unsigned int uartclk; /* UART clock rate */ 28 void *private_data; 29 unsigned char regshift; /* register shift */ 30 unsigned char iotype; /* UPIO_* */ 31 unsigned char hub6; 32 upf_t flags; /* UPF_* flags */ 33 unsigned int type; /* If UPF_FIXED_TYPE */ 34 unsigned int (*serial_in)(struct uart_port *, int); 35 void (*serial_out)(struct uart_port *, int, int); 36 void (*set_termios)(struct uart_port *, 37 struct ktermios *new, 38 struct ktermios *old); 39 unsigned int (*get_mctrl)(struct uart_port *); 40 int (*handle_irq)(struct uart_port *); 41 void (*pm)(struct uart_port *, unsigned int state, 42 unsigned old); 43 void (*handle_break)(struct uart_port *); 44}; 45 46/* 47 * Allocate 8250 platform device IDs. Nothing is implied by 48 * the numbering here, except for the legacy entry being -1. 49 */ 50enum { 51 PLAT8250_DEV_LEGACY = -1, 52 PLAT8250_DEV_PLATFORM, 53 PLAT8250_DEV_PLATFORM1, 54 PLAT8250_DEV_PLATFORM2, 55 PLAT8250_DEV_FOURPORT, 56 PLAT8250_DEV_ACCENT, 57 PLAT8250_DEV_BOCA, 58 PLAT8250_DEV_EXAR_ST16C554, 59 PLAT8250_DEV_HUB6, 60 PLAT8250_DEV_AU1X00, 61 PLAT8250_DEV_SM501, 62}; 63 64struct uart_8250_dma; 65struct uart_8250_port; 66 67/** 68 * 8250 core driver operations 69 * 70 * @setup_irq() Setup irq handling. The universal 8250 driver links this 71 * port to the irq chain. Other drivers may @request_irq(). 72 * @release_irq() Undo irq handling. The universal 8250 driver unlinks 73 * the port from the irq chain. 74 */ 75struct uart_8250_ops { 76 int (*setup_irq)(struct uart_8250_port *); 77 void (*release_irq)(struct uart_8250_port *); 78}; 79 80struct uart_8250_em485 { 81 struct timer_list start_tx_timer; /* "rs485 start tx" timer */ 82 struct timer_list stop_tx_timer; /* "rs485 stop tx" timer */ 83 struct timer_list *active_timer; /* pointer to active timer */ 84}; 85 86/* 87 * This should be used by drivers which want to register 88 * their own 8250 ports without registering their own 89 * platform device. Using these will make your driver 90 * dependent on the 8250 driver. 91 */ 92 93struct uart_8250_port { 94 struct uart_port port; 95 struct timer_list timer; /* "no irq" timer */ 96 struct list_head list; /* ports on this IRQ */ 97 unsigned short capabilities; /* port capabilities */ 98 unsigned short bugs; /* port bugs */ 99 bool fifo_bug; /* min RX trigger if enabled */ 100 unsigned int tx_loadsz; /* transmit fifo load size */ 101 unsigned char acr; 102 unsigned char fcr; 103 unsigned char ier; 104 unsigned char lcr; 105 unsigned char mcr; 106 unsigned char mcr_mask; /* mask of user bits */ 107 unsigned char mcr_force; /* mask of forced bits */ 108 unsigned char cur_iotype; /* Running I/O type */ 109 unsigned int rpm_tx_active; 110 unsigned char canary; /* non-zero during system sleep 111 * if no_console_suspend 112 */ 113 unsigned char probe; 114#define UART_PROBE_RSA (1 << 0) 115 116 /* 117 * Some bits in registers are cleared on a read, so they must 118 * be saved whenever the register is read but the bits will not 119 * be immediately processed. 120 */ 121#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS 122 unsigned char lsr_saved_flags; 123#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA 124 unsigned char msr_saved_flags; 125 126 struct uart_8250_dma *dma; 127 const struct uart_8250_ops *ops; 128 129 /* 8250 specific callbacks */ 130 int (*dl_read)(struct uart_8250_port *); 131 void (*dl_write)(struct uart_8250_port *, int); 132 133 struct uart_8250_em485 *em485; 134}; 135 136static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up) 137{ 138 return container_of(up, struct uart_8250_port, port); 139} 140 141int serial8250_register_8250_port(struct uart_8250_port *); 142void serial8250_unregister_port(int line); 143void serial8250_suspend_port(int line); 144void serial8250_resume_port(int line); 145 146extern int early_serial_setup(struct uart_port *port); 147 148extern int early_serial8250_setup(struct earlycon_device *device, 149 const char *options); 150extern void serial8250_do_set_termios(struct uart_port *port, 151 struct ktermios *termios, struct ktermios *old); 152extern unsigned int serial8250_do_get_mctrl(struct uart_port *port); 153extern int serial8250_do_startup(struct uart_port *port); 154extern void serial8250_do_shutdown(struct uart_port *port); 155extern void serial8250_do_pm(struct uart_port *port, unsigned int state, 156 unsigned int oldstate); 157extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); 158extern int fsl8250_handle_irq(struct uart_port *port); 159int serial8250_handle_irq(struct uart_port *port, unsigned int iir); 160unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); 161void serial8250_tx_chars(struct uart_8250_port *up); 162unsigned int serial8250_modem_status(struct uart_8250_port *up); 163void serial8250_init_port(struct uart_8250_port *up); 164void serial8250_set_defaults(struct uart_8250_port *up); 165void serial8250_console_write(struct uart_8250_port *up, const char *s, 166 unsigned int count); 167int serial8250_console_setup(struct uart_port *port, char *options, bool probe); 168 169extern void serial8250_set_isa_configurator(void (*v) 170 (int port, struct uart_port *up, 171 unsigned short *capabilities)); 172 173#endif