kernel / drivers / leds / leds-aat1290.c

/*
 *	LED Flash class driver for the AAT1290
 *	1.5A Step-Up Current Regulator for Flash LEDs
 *
 *	Copyright (C) 2015, Samsung Electronics Co., Ltd.
 *	Author: Jacek Anaszewski <[e-mail]>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/led-class-flash.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <media/v4l2-flash-led-class.h>

#define AAT1290_MOVIE_MODE_CURRENT_ADDR	17
#define AAT1290_MAX_MM_CURR_PERCENT_0	16
#define AAT1290_MAX_MM_CURR_PERCENT_100	1

#define AAT1290_FLASH_SAFETY_TIMER_ADDR	18

#define AAT1290_MOVIE_MODE_CONFIG_ADDR	19
#define AAT1290_MOVIE_MODE_OFF		1
#define AAT1290_MOVIE_MODE_ON		3

#define AAT1290_MM_CURRENT_RATIO_ADDR	20
#define AAT1290_MM_TO_FL_1_92		1

#define AAT1290_MM_TO_FL_RATIO		1000 / 1920
#define AAT1290_MAX_MM_CURRENT(fl_max)	(fl_max * AAT1290_MM_TO_FL_RATIO)

#define AAT1290_LATCH_TIME_MIN_US	500
#define AAT1290_LATCH_TIME_MAX_US	1000
#define AAT1290_EN_SET_TICK_TIME_US	1
#define AAT1290_FLEN_OFF_DELAY_TIME_US	10
#define AAT1290_FLASH_TM_NUM_LEVELS	16
#define AAT1290_MM_CURRENT_SCALE_SIZE	15


struct aat1290_led_config_data {
	/* maximum LED current in movie mode */
	u32 max_mm_current;
	/* maximum LED current in flash mode */
	u32 max_flash_current;
	/* maximum flash timeout */
	u32 max_flash_tm;
	/* external strobe capability */
	bool has_external_strobe;
	/* max LED brightness level */
	enum led_brightness max_brightness;
};

struct aat1290_led {
	/* platform device data */
	struct platform_device *pdev;
	/* secures access to the device */
	struct mutex lock;

	/* corresponding LED Flash class device */
	struct led_classdev_flash fled_cdev;
	/* V4L2 Flash device */
	struct v4l2_flash *v4l2_flash;

	/* FLEN pin */
	struct gpio_desc *gpio_fl_en;
	/* EN|SET pin  */
	struct gpio_desc *gpio_en_set;
	/* movie mode current scale */
	int *mm_current_scale;
	/* device mode */
	bool movie_mode;

	/* brightness cache */
	unsigned int torch_brightness;
};

static struct aat1290_led *fled_cdev_to_led(
				struct led_classdev_flash *fled_cdev)
{
	return container_of(fled_cdev, struct aat1290_led, fled_cdev);
}

static struct led_classdev_flash *led_cdev_to_fled_cdev(
				struct led_classdev *led_cdev)
{
	return container_of(led_cdev, struct led_classdev_flash, led_cdev);
}

static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value)
{
	int i;

	gpiod_direction_output(led->gpio_fl_en, 0);
	gpiod_direction_output(led->gpio_en_set, 0);

	udelay(AAT1290_FLEN_OFF_DELAY_TIME_US);

	/* write address */
	for (i = 0; i < addr; ++i) {
		udelay(AAT1290_EN_SET_TICK_TIME_US);
		gpiod_direction_output(led->gpio_en_set, 0);
		udelay(AAT1290_EN_SET_TICK_TIME_US);
		gpiod_direction_output(led->gpio_en_set, 1);
	}

	usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);

	/* write data */
	for (i = 0; i < value; ++i) {
		udelay(AAT1290_EN_SET_TICK_TIME_US);
		gpiod_direction_output(led->gpio_en_set, 0);
		udelay(AAT1290_EN_SET_TICK_TIME_US);
		gpiod_direction_output(led->gpio_en_set, 1);
	}

	usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
}

static void aat1290_set_flash_safety_timer(struct aat1290_led *led,
					unsigned int micro_sec)
{
	struct led_classdev_flash *fled_cdev = &led->fled_cdev;
	struct led_flash_setting *flash_tm = &fled_cdev->timeout;
	int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS -
				(micro_sec / flash_tm->step) + 1;

	aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR,
							flash_tm_reg);
}

/* LED subsystem callbacks */

static int aat1290_led_brightness_set(struct led_classdev *led_cdev,
					enum led_brightness brightness)
{
	struct led_classdev_flash *fled_cdev = led_cdev_to_fled_cdev(led_cdev);
	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);

	mutex_lock(&led->lock);

	if (brightness == 0) {
		gpiod_direction_output(led->gpio_fl_en, 0);
		gpiod_direction_output(led->gpio_en_set, 0);
		led->movie_mode = false;
	} else {
		if (!led->movie_mode) {
			aat1290_as2cwire_write(led,
				AAT1290_MM_CURRENT_RATIO_ADDR,
				AAT1290_MM_TO_FL_1_92);
			led->movie_mode = true;
		}

		aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR,
				AAT1290_MAX_MM_CURR_PERCENT_0 - brightness);
		aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR,
				AAT1290_MOVIE_MODE_ON);
	}

	mutex_unlock(&led->lock);

	return 0;
}

static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
					 bool state)

{
	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
	struct led_classdev *led_cdev = &fled_cdev->led_cdev;
	struct led_flash_setting *timeout = &fled_cdev->timeout;

	mutex_lock(&led->lock);

	if (state) {
		aat1290_set_flash_safety_timer(led, timeout->val);
		gpiod_direction_output(led->gpio_fl_en, 1);
	} else {
		gpiod_direction_output(led->gpio_fl_en, 0);
		gpiod_direction_output(led->gpio_en_set, 0);
	}

	/*
	 * To reenter movie mode after a flash event the part must be cycled
	 * off and back on to reset the movie mode and reprogrammed via the
	 * AS2Cwire. Therefore the brightness and movie_mode properties needs
	 * to be updated here to reflect the actual state.
	 */
	led_cdev->brightness = 0;
	led->movie_mode = false;

	mutex_unlock(&led->lock);

	return 0;
}

static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
						u32 timeout)
{
	/*
	 * Don't do anything - flash timeout is cached in the led-class-flash
	 * core and will be applied in the strobe_set op, as writing the
	 * safety timer register spuriously turns the torch mode on.
	 */

	return 0;
}

static int aat1290_led_parse_dt(struct aat1290_led *led,
			struct aat1290_led_config_data *cfg,
			struct device_node **sub_node)
{
	struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
	struct device *dev = &led->pdev->dev;
	struct device_node *child_node;
#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
	struct pinctrl *pinctrl;
#endif
	int ret = 0;

	led->gpio_fl_en = devm_gpiod_get(dev, "flen", GPIOD_ASIS);
	if (IS_ERR(led->gpio_fl_en)) {
		ret = PTR_ERR(led->gpio_fl_en);
		dev_err(dev, "Unable to claim gpio \"flen\".\n");
		return ret;
	}

	led->gpio_en_set = devm_gpiod_get(dev, "enset", GPIOD_ASIS);
	if (IS_ERR(led->gpio_en_set)) {
		ret = PTR_ERR(led->gpio_en_set);
		dev_err(dev, "Unable to claim gpio \"enset\".\n");
		return ret;
	}

#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
	pinctrl = devm_pinctrl_get_select_default(&led->pdev->dev);
	if (IS_ERR(pinctrl)) {
		cfg->has_external_strobe = false;
		dev_info(dev,
			 "No support for external strobe detected.\n");
	} else {
		cfg->has_external_strobe = true;
	}
#endif

	child_node = of_get_next_available_child(dev->of_node, NULL);
	if (!child_node) {
		dev_err(dev, "No DT child node found for connected LED.\n");
		return -EINVAL;
	}

	led_cdev->name = of_get_property(child_node, "label", NULL) ? :
						child_node->name;

	ret = of_property_read_u32(child_node, "led-max-microamp",
				&cfg->max_mm_current);
	/*
	 * led-max-microamp will default to 1/20 of flash-max-microamp
	 * in case it is missing.
	 */
	if (ret < 0)
		dev_warn(dev,
			"led-max-microamp DT property missing\n");

	ret = of_property_read_u32(child_node, "flash-max-microamp",
				&cfg->max_flash_current);
	if (ret < 0) {
		dev_err(dev,
			"flash-max-microamp DT property missing\n");
		goto err_parse_dt;
	}

	ret = of_property_read_u32(child_node, "flash-max-timeout-us",
				&cfg->max_flash_tm);
	if (ret < 0) {
		dev_err(dev,
			"flash-max-timeout-us DT property missing\n");
		goto err_parse_dt;
	}

	*sub_node = child_node;

err_parse_dt:
	of_node_put(child_node);

	return ret;
}

static void aat1290_led_validate_mm_current(struct aat1290_led *led,
					struct aat1290_led_config_data *cfg)
{
	int i, b = 0, e = AAT1290_MM_CURRENT_SCALE_SIZE;

	while (e - b > 1) {
		i = b + (e - b) / 2;
		if (cfg->max_mm_current < led->mm_current_scale[i])
			e = i;
		else
			b = i;
	}

	cfg->max_mm_current = led->mm_current_scale[b];
	cfg->max_brightness = b + 1;
}

static int init_mm_current_scale(struct aat1290_led *led,
			struct aat1290_led_config_data *cfg)
{
	int max_mm_current_percent[] = { 20, 22, 25, 28, 32, 36, 40, 45, 50, 56,
						63, 71, 79, 89, 100 };
	int i, max_mm_current =
			AAT1290_MAX_MM_CURRENT(cfg->max_flash_current);

	led->mm_current_scale = devm_kzalloc(&led->pdev->dev,
					sizeof(max_mm_current_percent),
					GFP_KERNEL);
	if (!led->mm_current_scale)
		return -ENOMEM;

	for (i = 0; i < AAT1290_MM_CURRENT_SCALE_SIZE; ++i)
		led->mm_current_scale[i] = max_mm_current *
					  max_mm_current_percent[i] / 100;

	return 0;
}

static int aat1290_led_get_configuration(struct aat1290_led *led,
					struct aat1290_led_config_data *cfg,
					struct device_node **sub_node)
{
	int ret;

	ret = aat1290_led_parse_dt(led, cfg, sub_node);
	if (ret < 0)
		return ret;
	/*
	 * Init non-linear movie mode current scale basing
	 * on the max flash current from led configuration.
	 */
	ret = init_mm_current_scale(led, cfg);
	if (ret < 0)
		return ret;

	aat1290_led_validate_mm_current(led, cfg);

#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
#else
	devm_kfree(&led->pdev->dev, led->mm_current_scale);
#endif

	return 0;
}

static void aat1290_init_flash_timeout(struct aat1290_led *led,
				struct aat1290_led_config_data *cfg)
{
	struct led_classdev_flash *fled_cdev = &led->fled_cdev;
	struct led_flash_setting *setting;

	/* Init flash timeout setting */
	setting = &fled_cdev->timeout;
	setting->min = cfg->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS;
	setting->max = cfg->max_flash_tm;
	setting->step = setting->min;
	setting->val = setting->max;
}

#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
static enum led_brightness aat1290_intensity_to_brightness(
					struct v4l2_flash *v4l2_flash,
					s32 intensity)
{
	struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
	int i;

	for (i = AAT1290_MM_CURRENT_SCALE_SIZE - 1; i >= 0; --i)
		if (intensity >= led->mm_current_scale[i])
			return i + 1;

	return 1;
}

static s32 aat1290_brightness_to_intensity(struct v4l2_flash *v4l2_flash,
					enum led_brightness brightness)
{
	struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);

	return led->mm_current_scale[brightness - 1];
}

static int aat1290_led_external_strobe_set(struct v4l2_flash *v4l2_flash,
						bool enable)
{
	struct aat1290_led *led = fled_cdev_to_led(v4l2_flash->fled_cdev);
	struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
	struct led_classdev *led_cdev = &fled_cdev->led_cdev;
	struct pinctrl *pinctrl;

	gpiod_direction_output(led->gpio_fl_en, 0);
	gpiod_direction_output(led->gpio_en_set, 0);

	led->movie_mode = false;
	led_cdev->brightness = 0;

	pinctrl = devm_pinctrl_get_select(&led->pdev->dev,
						enable ? "isp" : "host");
	if (IS_ERR(pinctrl)) {
		dev_warn(&led->pdev->dev, "Unable to switch strobe source.\n");
		return PTR_ERR(pinctrl);
	}

	return 0;
}

static void aat1290_init_v4l2_flash_config(struct aat1290_led *led,
					struct aat1290_led_config_data *led_cfg,
					struct v4l2_flash_config *v4l2_sd_cfg)
{
	struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
	struct led_flash_setting *s;

	strlcpy(v4l2_sd_cfg->dev_name, led_cdev->name,
		sizeof(v4l2_sd_cfg->dev_name));

	s = &v4l2_sd_cfg->torch_intensity;
	s->min = led->mm_current_scale[0];
	s->max = led_cfg->max_mm_current;
	s->step = 1;
	s->val = s->max;

	v4l2_sd_cfg->has_external_strobe = led_cfg->has_external_strobe;
}

static const struct v4l2_flash_ops v4l2_flash_ops = {
	.external_strobe_set = aat1290_led_external_strobe_set,
	.intensity_to_led_brightness = aat1290_intensity_to_brightness,
	.led_brightness_to_intensity = aat1290_brightness_to_intensity,
};
#else
static inline void aat1290_init_v4l2_flash_config(struct aat1290_led *led,
				struct aat1290_led_config_data *led_cfg,
				struct v4l2_flash_config *v4l2_sd_cfg)
{
}
static const struct v4l2_flash_ops v4l2_flash_ops;
#endif

static const struct led_flash_ops flash_ops = {
	.strobe_set = aat1290_led_flash_strobe_set,
	.timeout_set = aat1290_led_flash_timeout_set,
};

static int aat1290_led_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct device_node *sub_node = NULL;
	struct aat1290_led *led;
	struct led_classdev *led_cdev;
	struct led_classdev_flash *fled_cdev;
	struct aat1290_led_config_data led_cfg = {};
	struct v4l2_flash_config v4l2_sd_cfg = {};
	int ret;

	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
	if (!led)
		return -ENOMEM;

	led->pdev = pdev;
	platform_set_drvdata(pdev, led);

	fled_cdev = &led->fled_cdev;
	fled_cdev->ops = &flash_ops;
	led_cdev = &fled_cdev->led_cdev;

	ret = aat1290_led_get_configuration(led, &led_cfg, &sub_node);
	if (ret < 0)
		return ret;

	mutex_init(&led->lock);

	/* Initialize LED Flash class device */
	led_cdev->brightness_set_blocking = aat1290_led_brightness_set;
	led_cdev->max_brightness = led_cfg.max_brightness;
	led_cdev->flags |= LED_DEV_CAP_FLASH;

	aat1290_init_flash_timeout(led, &led_cfg);

	/* Register LED Flash class device */
	ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
	if (ret < 0)
		goto err_flash_register;

	aat1290_init_v4l2_flash_config(led, &led_cfg, &v4l2_sd_cfg);

	/* Create V4L2 Flash subdev. */
	led->v4l2_flash = v4l2_flash_init(dev, sub_node, fled_cdev, NULL,
					  &v4l2_flash_ops, &v4l2_sd_cfg);
	if (IS_ERR(led->v4l2_flash)) {
		ret = PTR_ERR(led->v4l2_flash);
		goto error_v4l2_flash_init;
	}

	return 0;

error_v4l2_flash_init:
	led_classdev_flash_unregister(fled_cdev);
err_flash_register:
	mutex_destroy(&led->lock);

	return ret;
}

static int aat1290_led_remove(struct platform_device *pdev)
{
	struct aat1290_led *led = platform_get_drvdata(pdev);

	v4l2_flash_release(led->v4l2_flash);
	led_classdev_flash_unregister(&led->fled_cdev);

	mutex_destroy(&led->lock);

	return 0;
}

static const struct of_device_id aat1290_led_dt_match[] = {
	{ .compatible = "skyworks,aat1290" },
	{},
};
MODULE_DEVICE_TABLE(of, aat1290_led_dt_match);

static struct platform_driver aat1290_led_driver = {
	.probe		= aat1290_led_probe,
	.remove		= aat1290_led_remove,
	.driver		= {
		.name	= "aat1290",
		.of_match_table = aat1290_led_dt_match,
	},
};

module_platform_driver(aat1290_led_driver);

MODULE_AUTHOR("Jacek Anaszewski <[e-mail]>");
MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs");
MODULE_LICENSE("GPL v2");