at v4.7 13 kB view raw
1#ifndef _LINUX_SCATTERLIST_H 2#define _LINUX_SCATTERLIST_H 3 4#include <linux/string.h> 5#include <linux/types.h> 6#include <linux/bug.h> 7#include <linux/mm.h> 8#include <asm/io.h> 9 10struct scatterlist { 11#ifdef CONFIG_DEBUG_SG 12 unsigned long sg_magic; 13#endif 14 unsigned long page_link; 15 unsigned int offset; 16 unsigned int length; 17 dma_addr_t dma_address; 18#ifdef CONFIG_NEED_SG_DMA_LENGTH 19 unsigned int dma_length; 20#endif 21}; 22 23/* 24 * These macros should be used after a dma_map_sg call has been done 25 * to get bus addresses of each of the SG entries and their lengths. 26 * You should only work with the number of sg entries dma_map_sg 27 * returns, or alternatively stop on the first sg_dma_len(sg) which 28 * is 0. 29 */ 30#define sg_dma_address(sg) ((sg)->dma_address) 31 32#ifdef CONFIG_NEED_SG_DMA_LENGTH 33#define sg_dma_len(sg) ((sg)->dma_length) 34#else 35#define sg_dma_len(sg) ((sg)->length) 36#endif 37 38struct sg_table { 39 struct scatterlist *sgl; /* the list */ 40 unsigned int nents; /* number of mapped entries */ 41 unsigned int orig_nents; /* original size of list */ 42}; 43 44/* 45 * Notes on SG table design. 46 * 47 * We use the unsigned long page_link field in the scatterlist struct to place 48 * the page pointer AND encode information about the sg table as well. The two 49 * lower bits are reserved for this information. 50 * 51 * If bit 0 is set, then the page_link contains a pointer to the next sg 52 * table list. Otherwise the next entry is at sg + 1. 53 * 54 * If bit 1 is set, then this sg entry is the last element in a list. 55 * 56 * See sg_next(). 57 * 58 */ 59 60#define SG_MAGIC 0x87654321 61 62/* 63 * We overload the LSB of the page pointer to indicate whether it's 64 * a valid sg entry, or whether it points to the start of a new scatterlist. 65 * Those low bits are there for everyone! (thanks mason :-) 66 */ 67#define sg_is_chain(sg) ((sg)->page_link & 0x01) 68#define sg_is_last(sg) ((sg)->page_link & 0x02) 69#define sg_chain_ptr(sg) \ 70 ((struct scatterlist *) ((sg)->page_link & ~0x03)) 71 72/** 73 * sg_assign_page - Assign a given page to an SG entry 74 * @sg: SG entry 75 * @page: The page 76 * 77 * Description: 78 * Assign page to sg entry. Also see sg_set_page(), the most commonly used 79 * variant. 80 * 81 **/ 82static inline void sg_assign_page(struct scatterlist *sg, struct page *page) 83{ 84 unsigned long page_link = sg->page_link & 0x3; 85 86 /* 87 * In order for the low bit stealing approach to work, pages 88 * must be aligned at a 32-bit boundary as a minimum. 89 */ 90 BUG_ON((unsigned long) page & 0x03); 91#ifdef CONFIG_DEBUG_SG 92 BUG_ON(sg->sg_magic != SG_MAGIC); 93 BUG_ON(sg_is_chain(sg)); 94#endif 95 sg->page_link = page_link | (unsigned long) page; 96} 97 98/** 99 * sg_set_page - Set sg entry to point at given page 100 * @sg: SG entry 101 * @page: The page 102 * @len: Length of data 103 * @offset: Offset into page 104 * 105 * Description: 106 * Use this function to set an sg entry pointing at a page, never assign 107 * the page directly. We encode sg table information in the lower bits 108 * of the page pointer. See sg_page() for looking up the page belonging 109 * to an sg entry. 110 * 111 **/ 112static inline void sg_set_page(struct scatterlist *sg, struct page *page, 113 unsigned int len, unsigned int offset) 114{ 115 sg_assign_page(sg, page); 116 sg->offset = offset; 117 sg->length = len; 118} 119 120static inline struct page *sg_page(struct scatterlist *sg) 121{ 122#ifdef CONFIG_DEBUG_SG 123 BUG_ON(sg->sg_magic != SG_MAGIC); 124 BUG_ON(sg_is_chain(sg)); 125#endif 126 return (struct page *)((sg)->page_link & ~0x3); 127} 128 129/** 130 * sg_set_buf - Set sg entry to point at given data 131 * @sg: SG entry 132 * @buf: Data 133 * @buflen: Data length 134 * 135 **/ 136static inline void sg_set_buf(struct scatterlist *sg, const void *buf, 137 unsigned int buflen) 138{ 139#ifdef CONFIG_DEBUG_SG 140 BUG_ON(!virt_addr_valid(buf)); 141#endif 142 sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); 143} 144 145/* 146 * Loop over each sg element, following the pointer to a new list if necessary 147 */ 148#define for_each_sg(sglist, sg, nr, __i) \ 149 for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg)) 150 151/** 152 * sg_chain - Chain two sglists together 153 * @prv: First scatterlist 154 * @prv_nents: Number of entries in prv 155 * @sgl: Second scatterlist 156 * 157 * Description: 158 * Links @prv@ and @sgl@ together, to form a longer scatterlist. 159 * 160 **/ 161static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, 162 struct scatterlist *sgl) 163{ 164 /* 165 * offset and length are unused for chain entry. Clear them. 166 */ 167 prv[prv_nents - 1].offset = 0; 168 prv[prv_nents - 1].length = 0; 169 170 /* 171 * Set lowest bit to indicate a link pointer, and make sure to clear 172 * the termination bit if it happens to be set. 173 */ 174 prv[prv_nents - 1].page_link = ((unsigned long) sgl | 0x01) & ~0x02; 175} 176 177/** 178 * sg_mark_end - Mark the end of the scatterlist 179 * @sg: SG entryScatterlist 180 * 181 * Description: 182 * Marks the passed in sg entry as the termination point for the sg 183 * table. A call to sg_next() on this entry will return NULL. 184 * 185 **/ 186static inline void sg_mark_end(struct scatterlist *sg) 187{ 188#ifdef CONFIG_DEBUG_SG 189 BUG_ON(sg->sg_magic != SG_MAGIC); 190#endif 191 /* 192 * Set termination bit, clear potential chain bit 193 */ 194 sg->page_link |= 0x02; 195 sg->page_link &= ~0x01; 196} 197 198/** 199 * sg_unmark_end - Undo setting the end of the scatterlist 200 * @sg: SG entryScatterlist 201 * 202 * Description: 203 * Removes the termination marker from the given entry of the scatterlist. 204 * 205 **/ 206static inline void sg_unmark_end(struct scatterlist *sg) 207{ 208#ifdef CONFIG_DEBUG_SG 209 BUG_ON(sg->sg_magic != SG_MAGIC); 210#endif 211 sg->page_link &= ~0x02; 212} 213 214/** 215 * sg_phys - Return physical address of an sg entry 216 * @sg: SG entry 217 * 218 * Description: 219 * This calls page_to_phys() on the page in this sg entry, and adds the 220 * sg offset. The caller must know that it is legal to call page_to_phys() 221 * on the sg page. 222 * 223 **/ 224static inline dma_addr_t sg_phys(struct scatterlist *sg) 225{ 226 return page_to_phys(sg_page(sg)) + sg->offset; 227} 228 229/** 230 * sg_virt - Return virtual address of an sg entry 231 * @sg: SG entry 232 * 233 * Description: 234 * This calls page_address() on the page in this sg entry, and adds the 235 * sg offset. The caller must know that the sg page has a valid virtual 236 * mapping. 237 * 238 **/ 239static inline void *sg_virt(struct scatterlist *sg) 240{ 241 return page_address(sg_page(sg)) + sg->offset; 242} 243 244int sg_nents(struct scatterlist *sg); 245int sg_nents_for_len(struct scatterlist *sg, u64 len); 246struct scatterlist *sg_next(struct scatterlist *); 247struct scatterlist *sg_last(struct scatterlist *s, unsigned int); 248void sg_init_table(struct scatterlist *, unsigned int); 249void sg_init_one(struct scatterlist *, const void *, unsigned int); 250int sg_split(struct scatterlist *in, const int in_mapped_nents, 251 const off_t skip, const int nb_splits, 252 const size_t *split_sizes, 253 struct scatterlist **out, int *out_mapped_nents, 254 gfp_t gfp_mask); 255 256typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t); 257typedef void (sg_free_fn)(struct scatterlist *, unsigned int); 258 259void __sg_free_table(struct sg_table *, unsigned int, bool, sg_free_fn *); 260void sg_free_table(struct sg_table *); 261int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, 262 struct scatterlist *, gfp_t, sg_alloc_fn *); 263int sg_alloc_table(struct sg_table *, unsigned int, gfp_t); 264int sg_alloc_table_from_pages(struct sg_table *sgt, 265 struct page **pages, unsigned int n_pages, 266 unsigned long offset, unsigned long size, 267 gfp_t gfp_mask); 268 269size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf, 270 size_t buflen, off_t skip, bool to_buffer); 271 272size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents, 273 const void *buf, size_t buflen); 274size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, 275 void *buf, size_t buflen); 276 277size_t sg_pcopy_from_buffer(struct scatterlist *sgl, unsigned int nents, 278 const void *buf, size_t buflen, off_t skip); 279size_t sg_pcopy_to_buffer(struct scatterlist *sgl, unsigned int nents, 280 void *buf, size_t buflen, off_t skip); 281 282/* 283 * Maximum number of entries that will be allocated in one piece, if 284 * a list larger than this is required then chaining will be utilized. 285 */ 286#define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist)) 287 288/* 289 * The maximum number of SG segments that we will put inside a 290 * scatterlist (unless chaining is used). Should ideally fit inside a 291 * single page, to avoid a higher order allocation. We could define this 292 * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The 293 * minimum value is 32 294 */ 295#define SG_CHUNK_SIZE 128 296 297/* 298 * Like SG_CHUNK_SIZE, but for archs that have sg chaining. This limit 299 * is totally arbitrary, a setting of 2048 will get you at least 8mb ios. 300 */ 301#ifdef CONFIG_ARCH_HAS_SG_CHAIN 302#define SG_MAX_SEGMENTS 2048 303#else 304#define SG_MAX_SEGMENTS SG_CHUNK_SIZE 305#endif 306 307#ifdef CONFIG_SG_POOL 308void sg_free_table_chained(struct sg_table *table, bool first_chunk); 309int sg_alloc_table_chained(struct sg_table *table, int nents, 310 struct scatterlist *first_chunk); 311#endif 312 313/* 314 * sg page iterator 315 * 316 * Iterates over sg entries page-by-page. On each successful iteration, 317 * you can call sg_page_iter_page(@piter) and sg_page_iter_dma_address(@piter) 318 * to get the current page and its dma address. @piter->sg will point to the 319 * sg holding this page and @piter->sg_pgoffset to the page's page offset 320 * within the sg. The iteration will stop either when a maximum number of sg 321 * entries was reached or a terminating sg (sg_last(sg) == true) was reached. 322 */ 323struct sg_page_iter { 324 struct scatterlist *sg; /* sg holding the page */ 325 unsigned int sg_pgoffset; /* page offset within the sg */ 326 327 /* these are internal states, keep away */ 328 unsigned int __nents; /* remaining sg entries */ 329 int __pg_advance; /* nr pages to advance at the 330 * next step */ 331}; 332 333bool __sg_page_iter_next(struct sg_page_iter *piter); 334void __sg_page_iter_start(struct sg_page_iter *piter, 335 struct scatterlist *sglist, unsigned int nents, 336 unsigned long pgoffset); 337/** 338 * sg_page_iter_page - get the current page held by the page iterator 339 * @piter: page iterator holding the page 340 */ 341static inline struct page *sg_page_iter_page(struct sg_page_iter *piter) 342{ 343 return nth_page(sg_page(piter->sg), piter->sg_pgoffset); 344} 345 346/** 347 * sg_page_iter_dma_address - get the dma address of the current page held by 348 * the page iterator. 349 * @piter: page iterator holding the page 350 */ 351static inline dma_addr_t sg_page_iter_dma_address(struct sg_page_iter *piter) 352{ 353 return sg_dma_address(piter->sg) + (piter->sg_pgoffset << PAGE_SHIFT); 354} 355 356/** 357 * for_each_sg_page - iterate over the pages of the given sg list 358 * @sglist: sglist to iterate over 359 * @piter: page iterator to hold current page, sg, sg_pgoffset 360 * @nents: maximum number of sg entries to iterate over 361 * @pgoffset: starting page offset 362 */ 363#define for_each_sg_page(sglist, piter, nents, pgoffset) \ 364 for (__sg_page_iter_start((piter), (sglist), (nents), (pgoffset)); \ 365 __sg_page_iter_next(piter);) 366 367/* 368 * Mapping sg iterator 369 * 370 * Iterates over sg entries mapping page-by-page. On each successful 371 * iteration, @miter->page points to the mapped page and 372 * @miter->length bytes of data can be accessed at @miter->addr. As 373 * long as an interation is enclosed between start and stop, the user 374 * is free to choose control structure and when to stop. 375 * 376 * @miter->consumed is set to @miter->length on each iteration. It 377 * can be adjusted if the user can't consume all the bytes in one go. 378 * Also, a stopped iteration can be resumed by calling next on it. 379 * This is useful when iteration needs to release all resources and 380 * continue later (e.g. at the next interrupt). 381 */ 382 383#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */ 384#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */ 385#define SG_MITER_FROM_SG (1 << 2) /* nop */ 386 387struct sg_mapping_iter { 388 /* the following three fields can be accessed directly */ 389 struct page *page; /* currently mapped page */ 390 void *addr; /* pointer to the mapped area */ 391 size_t length; /* length of the mapped area */ 392 size_t consumed; /* number of consumed bytes */ 393 struct sg_page_iter piter; /* page iterator */ 394 395 /* these are internal states, keep away */ 396 unsigned int __offset; /* offset within page */ 397 unsigned int __remaining; /* remaining bytes on page */ 398 unsigned int __flags; 399}; 400 401void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl, 402 unsigned int nents, unsigned int flags); 403bool sg_miter_skip(struct sg_mapping_iter *miter, off_t offset); 404bool sg_miter_next(struct sg_mapping_iter *miter); 405void sg_miter_stop(struct sg_mapping_iter *miter); 406 407#endif /* _LINUX_SCATTERLIST_H */