Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/******************************************************************************
2 *
3 * Name: actypes.h - Common data types for the entire ACPI subsystem
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#ifndef __ACTYPES_H__
45#define __ACTYPES_H__
46
47/* acpisrc:struct_defs -- for acpisrc conversion */
48
49/*
50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
52 * 12/2006.
53 */
54#ifndef ACPI_MACHINE_WIDTH
55#error ACPI_MACHINE_WIDTH not defined
56#endif
57
58/*
59 * Data type ranges
60 * Note: These macros are designed to be compiler independent as well as
61 * working around problems that some 32-bit compilers have with 64-bit
62 * constants.
63 */
64#define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */
65#define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */
66#define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */
67#define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */
68#define ACPI_ASCII_MAX 0x7F
69
70/*
71 * Architecture-specific ACPICA Subsystem Data Types
72 *
73 * The goal of these types is to provide source code portability across
74 * 16-bit, 32-bit, and 64-bit targets.
75 *
76 * 1) The following types are of fixed size for all targets (16/32/64):
77 *
78 * u8 Logical boolean
79 *
80 * u8 8-bit (1 byte) unsigned value
81 * u16 16-bit (2 byte) unsigned value
82 * u32 32-bit (4 byte) unsigned value
83 * u64 64-bit (8 byte) unsigned value
84 *
85 * s16 16-bit (2 byte) signed value
86 * s32 32-bit (4 byte) signed value
87 * s64 64-bit (8 byte) signed value
88 *
89 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the
90 * compiler-dependent header(s) and were introduced because there is no common
91 * 64-bit integer type across the various compilation models, as shown in
92 * the table below.
93 *
94 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
95 * char 8 8 8 8 8 8
96 * short 16 16 16 16 16 16
97 * _int32 32
98 * int 32 64 32 32 16 16
99 * long 64 64 32 32 32 32
100 * long long 64 64
101 * pointer 64 64 64 32 32 32
102 *
103 * Note: ILP64 and LP32 are currently not supported.
104 *
105 *
106 * 2) These types represent the native word size of the target mode of the
107 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
108 * usually used for memory allocation, efficient loop counters, and array
109 * indexes. The types are similar to the size_t type in the C library and are
110 * required because there is no C type that consistently represents the native
111 * data width. acpi_size is needed because there is no guarantee that a
112 * kernel-level C library is present.
113 *
114 * acpi_size 16/32/64-bit unsigned value
115 * acpi_native_int 16/32/64-bit signed value
116 */
117
118/*******************************************************************************
119 *
120 * Common types for all compilers, all targets
121 *
122 ******************************************************************************/
123
124#ifndef ACPI_USE_SYSTEM_INTTYPES
125
126typedef unsigned char u8;
127typedef unsigned short u16;
128typedef short s16;
129typedef COMPILER_DEPENDENT_UINT64 u64;
130typedef COMPILER_DEPENDENT_INT64 s64;
131
132#endif /* ACPI_USE_SYSTEM_INTTYPES */
133
134/*
135 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
136 * across operating systems or even the various UNIX systems. Since ACPICA
137 * only needs the thread ID as a unique thread identifier, we use a u64
138 * as the only common data type - it will accommodate any type of pointer or
139 * any type of integer. It is up to the host-dependent OSL to cast the
140 * native thread ID type to a u64 (in acpi_os_get_thread_id).
141 */
142#define acpi_thread_id u64
143
144/*******************************************************************************
145 *
146 * Types specific to 64-bit targets
147 *
148 ******************************************************************************/
149
150#if ACPI_MACHINE_WIDTH == 64
151
152#ifndef ACPI_USE_SYSTEM_INTTYPES
153
154typedef unsigned int u32;
155typedef int s32;
156
157#endif /* ACPI_USE_SYSTEM_INTTYPES */
158
159typedef s64 acpi_native_int;
160
161typedef u64 acpi_size;
162typedef u64 acpi_io_address;
163typedef u64 acpi_physical_address;
164
165#define ACPI_MAX_PTR ACPI_UINT64_MAX
166#define ACPI_SIZE_MAX ACPI_UINT64_MAX
167
168#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
169
170/*
171 * In the case of the Itanium Processor Family (IPF), the hardware does not
172 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
173 * to indicate that special precautions must be taken to avoid alignment faults.
174 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
175 *
176 * Note: EM64T and other X86-64 processors support misaligned transfers,
177 * so there is no need to define this flag.
178 */
179#if defined (__IA64__) || defined (__ia64__)
180#define ACPI_MISALIGNMENT_NOT_SUPPORTED
181#endif
182
183/*******************************************************************************
184 *
185 * Types specific to 32-bit targets
186 *
187 ******************************************************************************/
188
189#elif ACPI_MACHINE_WIDTH == 32
190
191#ifndef ACPI_USE_SYSTEM_INTTYPES
192
193typedef unsigned int u32;
194typedef int s32;
195
196#endif /* ACPI_USE_SYSTEM_INTTYPES */
197
198typedef s32 acpi_native_int;
199
200typedef u32 acpi_size;
201
202#ifdef ACPI_32BIT_PHYSICAL_ADDRESS
203
204/*
205 * OSPMs can define this to shrink the size of the structures for 32-bit
206 * none PAE environment. ASL compiler may always define this to generate
207 * 32-bit OSPM compliant tables.
208 */
209typedef u32 acpi_io_address;
210typedef u32 acpi_physical_address;
211
212#else /* ACPI_32BIT_PHYSICAL_ADDRESS */
213
214/*
215 * It is reported that, after some calculations, the physical addresses can
216 * wrap over the 32-bit boundary on 32-bit PAE environment.
217 * https://bugzilla.kernel.org/show_bug.cgi?id=87971
218 */
219typedef u64 acpi_io_address;
220typedef u64 acpi_physical_address;
221
222#endif /* ACPI_32BIT_PHYSICAL_ADDRESS */
223
224#define ACPI_MAX_PTR ACPI_UINT32_MAX
225#define ACPI_SIZE_MAX ACPI_UINT32_MAX
226
227#else
228
229/* ACPI_MACHINE_WIDTH must be either 64 or 32 */
230
231#error unknown ACPI_MACHINE_WIDTH
232#endif
233
234/*******************************************************************************
235 *
236 * OS-dependent types
237 *
238 * If the defaults below are not appropriate for the host system, they can
239 * be defined in the OS-specific header, and this will take precedence.
240 *
241 ******************************************************************************/
242
243/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
244
245#ifndef acpi_cpu_flags
246#define acpi_cpu_flags acpi_size
247#endif
248
249/* Object returned from acpi_os_create_cache */
250
251#ifndef acpi_cache_t
252#ifdef ACPI_USE_LOCAL_CACHE
253#define acpi_cache_t struct acpi_memory_list
254#else
255#define acpi_cache_t void *
256#endif
257#endif
258
259/*
260 * Synchronization objects - Mutexes, Semaphores, and spin_locks
261 */
262#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
263/*
264 * These macros are used if the host OS does not support a mutex object.
265 * Map the OSL Mutex interfaces to binary semaphores.
266 */
267#define acpi_mutex acpi_semaphore
268#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
269#define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle)
270#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
271#define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1)
272#endif
273
274/* Configurable types for synchronization objects */
275
276#ifndef acpi_spinlock
277#define acpi_spinlock void *
278#endif
279
280#ifndef acpi_semaphore
281#define acpi_semaphore void *
282#endif
283
284#ifndef acpi_mutex
285#define acpi_mutex void *
286#endif
287
288/*******************************************************************************
289 *
290 * Compiler-dependent types
291 *
292 * If the defaults below are not appropriate for the host compiler, they can
293 * be defined in the compiler-specific header, and this will take precedence.
294 *
295 ******************************************************************************/
296
297/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
298
299#ifndef acpi_uintptr_t
300#define acpi_uintptr_t void *
301#endif
302
303/*
304 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
305 * some compilers can catch printf format string problems
306 */
307#ifndef ACPI_PRINTF_LIKE
308#define ACPI_PRINTF_LIKE(c)
309#endif
310
311/*
312 * Some compilers complain about unused variables. Sometimes we don't want to
313 * use all the variables (for example, _acpi_module_name). This allows us
314 * to tell the compiler in a per-variable manner that a variable
315 * is unused
316 */
317#ifndef ACPI_UNUSED_VAR
318#define ACPI_UNUSED_VAR
319#endif
320
321/*
322 * All ACPICA external functions that are available to the rest of the kernel
323 * are tagged with thes macros which can be defined as appropriate for the host.
324 *
325 * Notes:
326 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination
327 * interfaces that may need special processing.
328 * ACPI_EXPORT_SYMBOL is used for all other public external functions.
329 */
330#ifndef ACPI_EXPORT_SYMBOL_INIT
331#define ACPI_EXPORT_SYMBOL_INIT(symbol)
332#endif
333
334#ifndef ACPI_EXPORT_SYMBOL
335#define ACPI_EXPORT_SYMBOL(symbol)
336#endif
337
338/*
339 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA
340 * utilities only.
341 */
342#ifndef ACPI_DEBUG_INITIALIZE
343#define ACPI_DEBUG_INITIALIZE()
344#endif
345
346/*******************************************************************************
347 *
348 * Configuration
349 *
350 ******************************************************************************/
351
352#ifdef ACPI_NO_MEM_ALLOCATIONS
353
354#define ACPI_ALLOCATE(a) NULL
355#define ACPI_ALLOCATE_ZEROED(a) NULL
356#define ACPI_FREE(a)
357#define ACPI_MEM_TRACKING(a)
358
359#else /* ACPI_NO_MEM_ALLOCATIONS */
360
361#ifdef ACPI_DBG_TRACK_ALLOCATIONS
362/*
363 * Memory allocation tracking (used by acpi_exec to detect memory leaks)
364 */
365#define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__
366#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
367#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
368#define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS)
369#define ACPI_MEM_TRACKING(a) a
370
371#else
372/*
373 * Normal memory allocation directly via the OS services layer
374 */
375#define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a))
376#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a))
377#define ACPI_FREE(a) acpi_os_free (a)
378#define ACPI_MEM_TRACKING(a)
379
380#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
381
382#endif /* ACPI_NO_MEM_ALLOCATIONS */
383
384/******************************************************************************
385 *
386 * ACPI Specification constants (Do not change unless the specification changes)
387 *
388 *****************************************************************************/
389
390/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
391
392#define ACPI_MAX_GPE_BLOCKS 2
393
394/* Default ACPI register widths */
395
396#define ACPI_GPE_REGISTER_WIDTH 8
397#define ACPI_PM1_REGISTER_WIDTH 16
398#define ACPI_PM2_REGISTER_WIDTH 8
399#define ACPI_PM_TIMER_WIDTH 32
400#define ACPI_RESET_REGISTER_WIDTH 8
401
402/* Names within the namespace are 4 bytes long */
403
404#define ACPI_NAME_SIZE 4
405#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
406#define ACPI_PATH_SEPARATOR '.'
407
408/* Sizes for ACPI table headers */
409
410#define ACPI_OEM_ID_SIZE 6
411#define ACPI_OEM_TABLE_ID_SIZE 8
412
413/* ACPI/PNP hardware IDs */
414
415#define PCI_ROOT_HID_STRING "PNP0A03"
416#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08"
417
418/* PM Timer ticks per second (HZ) */
419
420#define ACPI_PM_TIMER_FREQUENCY 3579545
421
422/*******************************************************************************
423 *
424 * Independent types
425 *
426 ******************************************************************************/
427
428/* Logical defines and NULL */
429
430#ifdef FALSE
431#undef FALSE
432#endif
433#define FALSE (1 == 0)
434
435#ifdef TRUE
436#undef TRUE
437#endif
438#define TRUE (1 == 1)
439
440#ifndef NULL
441#define NULL (void *) 0
442#endif
443
444/*
445 * Miscellaneous types
446 */
447typedef u32 acpi_status; /* All ACPI Exceptions */
448typedef u32 acpi_name; /* 4-byte ACPI name */
449typedef char *acpi_string; /* Null terminated ASCII string */
450typedef void *acpi_handle; /* Actually a ptr to a NS Node */
451
452/* Time constants for timer calculations */
453
454#define ACPI_MSEC_PER_SEC 1000L
455
456#define ACPI_USEC_PER_MSEC 1000L
457#define ACPI_USEC_PER_SEC 1000000L
458
459#define ACPI_100NSEC_PER_USEC 10L
460#define ACPI_100NSEC_PER_MSEC 10000L
461#define ACPI_100NSEC_PER_SEC 10000000L
462
463#define ACPI_NSEC_PER_USEC 1000L
464#define ACPI_NSEC_PER_MSEC 1000000L
465#define ACPI_NSEC_PER_SEC 1000000000L
466
467/* Owner IDs are used to track namespace nodes for selective deletion */
468
469typedef u8 acpi_owner_id;
470#define ACPI_OWNER_ID_MAX 0xFF
471
472#define ACPI_INTEGER_BIT_SIZE 64
473#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
474#define ACPI_MAX64_DECIMAL_DIGITS 20
475#define ACPI_MAX32_DECIMAL_DIGITS 10
476#define ACPI_MAX16_DECIMAL_DIGITS 5
477#define ACPI_MAX8_DECIMAL_DIGITS 3
478
479/*
480 * Constants with special meanings
481 */
482#define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
483#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
484#define ACPI_DO_NOT_WAIT 0
485
486/*
487 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
488 * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
489 * pertains to the ACPI integer type only, not to other integers used in the
490 * implementation of the ACPICA subsystem.
491 *
492 * 01/2010: This type is obsolete and has been removed from the entire ACPICA
493 * code base. It remains here for compatibility with device drivers that use
494 * the type. However, it will be removed in the future.
495 */
496typedef u64 acpi_integer;
497#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
498
499/*******************************************************************************
500 *
501 * Commonly used macros
502 *
503 ******************************************************************************/
504
505/* Data manipulation */
506
507#define ACPI_LOBYTE(integer) ((u8) (u16)(integer))
508#define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8))
509#define ACPI_LOWORD(integer) ((u16) (u32)(integer))
510#define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16))
511#define ACPI_LODWORD(integer64) ((u32) (u64)(integer64))
512#define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32))
513
514#define ACPI_SET_BIT(target,bit) ((target) |= (bit))
515#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
516#define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
517#define ACPI_MAX(a,b) (((a)>(b))?(a):(b))
518
519/* Size calculation */
520
521#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
522
523/* Pointer manipulation */
524
525#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
526#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
527#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
528#define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b)))
529#define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
530
531/* Pointer/Integer type conversions */
532
533#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
534#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL)
535#define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL)
536#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
537#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
538
539/* Optimizations for 4-character (32-bit) acpi_name manipulation */
540
541#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
542#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
543#define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
544#else
545#define ACPI_COMPARE_NAME(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
546#define ACPI_MOVE_NAME(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
547#endif
548
549/* Support for the special RSDP signature (8 characters) */
550
551#define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8))
552#define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8))
553
554/*******************************************************************************
555 *
556 * Miscellaneous constants
557 *
558 ******************************************************************************/
559
560/*
561 * Initialization sequence
562 */
563#define ACPI_FULL_INITIALIZATION 0x00
564#define ACPI_NO_ADDRESS_SPACE_INIT 0x01
565#define ACPI_NO_HARDWARE_INIT 0x02
566#define ACPI_NO_EVENT_INIT 0x04
567#define ACPI_NO_HANDLER_INIT 0x08
568#define ACPI_NO_ACPI_ENABLE 0x10
569#define ACPI_NO_DEVICE_INIT 0x20
570#define ACPI_NO_OBJECT_INIT 0x40
571#define ACPI_NO_FACS_INIT 0x80
572
573/*
574 * Initialization state
575 */
576#define ACPI_SUBSYSTEM_INITIALIZE 0x01
577#define ACPI_INITIALIZED_OK 0x02
578
579/*
580 * Power state values
581 */
582#define ACPI_STATE_UNKNOWN (u8) 0xFF
583
584#define ACPI_STATE_S0 (u8) 0
585#define ACPI_STATE_S1 (u8) 1
586#define ACPI_STATE_S2 (u8) 2
587#define ACPI_STATE_S3 (u8) 3
588#define ACPI_STATE_S4 (u8) 4
589#define ACPI_STATE_S5 (u8) 5
590#define ACPI_S_STATES_MAX ACPI_STATE_S5
591#define ACPI_S_STATE_COUNT 6
592
593#define ACPI_STATE_D0 (u8) 0
594#define ACPI_STATE_D1 (u8) 1
595#define ACPI_STATE_D2 (u8) 2
596#define ACPI_STATE_D3_HOT (u8) 3
597#define ACPI_STATE_D3 (u8) 4
598#define ACPI_STATE_D3_COLD ACPI_STATE_D3
599#define ACPI_D_STATES_MAX ACPI_STATE_D3
600#define ACPI_D_STATE_COUNT 5
601
602#define ACPI_STATE_C0 (u8) 0
603#define ACPI_STATE_C1 (u8) 1
604#define ACPI_STATE_C2 (u8) 2
605#define ACPI_STATE_C3 (u8) 3
606#define ACPI_C_STATES_MAX ACPI_STATE_C3
607#define ACPI_C_STATE_COUNT 4
608
609/*
610 * Sleep type invalid value
611 */
612#define ACPI_SLEEP_TYPE_MAX 0x7
613#define ACPI_SLEEP_TYPE_INVALID 0xFF
614
615/*
616 * Standard notify values
617 */
618#define ACPI_NOTIFY_BUS_CHECK (u8) 0x00
619#define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01
620#define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02
621#define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03
622#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04
623#define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05
624#define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06
625#define ACPI_NOTIFY_POWER_FAULT (u8) 0x07
626#define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08
627#define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09
628#define ACPI_NOTIFY_RESERVED (u8) 0x0A
629#define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B
630#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C
631#define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D
632
633#define ACPI_GENERIC_NOTIFY_MAX 0x0D
634#define ACPI_SPECIFIC_NOTIFY_MAX 0x84
635
636/*
637 * Types associated with ACPI names and objects. The first group of
638 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
639 * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
640 * only add to the first group if the spec changes.
641 *
642 * NOTE: Types must be kept in sync with the global acpi_ns_properties
643 * and acpi_ns_type_names arrays.
644 */
645typedef u32 acpi_object_type;
646
647#define ACPI_TYPE_ANY 0x00
648#define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */
649#define ACPI_TYPE_STRING 0x02
650#define ACPI_TYPE_BUFFER 0x03
651#define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */
652#define ACPI_TYPE_FIELD_UNIT 0x05
653#define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */
654#define ACPI_TYPE_EVENT 0x07
655#define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */
656#define ACPI_TYPE_MUTEX 0x09
657#define ACPI_TYPE_REGION 0x0A
658#define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */
659#define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */
660#define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */
661#define ACPI_TYPE_BUFFER_FIELD 0x0E
662#define ACPI_TYPE_DDB_HANDLE 0x0F
663#define ACPI_TYPE_DEBUG_OBJECT 0x10
664
665#define ACPI_TYPE_EXTERNAL_MAX 0x10
666#define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1)
667
668/*
669 * These are object types that do not map directly to the ACPI
670 * object_type() operator. They are used for various internal purposes only.
671 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
672 * internal types must move upwards. (There is code that depends on these
673 * values being contiguous with the external types above.)
674 */
675#define ACPI_TYPE_LOCAL_REGION_FIELD 0x11
676#define ACPI_TYPE_LOCAL_BANK_FIELD 0x12
677#define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13
678#define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */
679#define ACPI_TYPE_LOCAL_ALIAS 0x15
680#define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16
681#define ACPI_TYPE_LOCAL_NOTIFY 0x17
682#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
683#define ACPI_TYPE_LOCAL_RESOURCE 0x19
684#define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A
685#define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */
686
687#define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */
688#define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1)
689
690/*
691 * These are special object types that never appear in
692 * a Namespace node, only in an object of union acpi_operand_object
693 */
694#define ACPI_TYPE_LOCAL_EXTRA 0x1C
695#define ACPI_TYPE_LOCAL_DATA 0x1D
696
697#define ACPI_TYPE_LOCAL_MAX 0x1D
698
699/* All types above here are invalid */
700
701#define ACPI_TYPE_INVALID 0x1E
702#define ACPI_TYPE_NOT_FOUND 0xFF
703
704#define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1)
705
706/*
707 * All I/O
708 */
709#define ACPI_READ 0
710#define ACPI_WRITE 1
711#define ACPI_IO_MASK 1
712
713/*
714 * Event Types: Fixed & General Purpose
715 */
716typedef u32 acpi_event_type;
717
718/*
719 * Fixed events
720 */
721#define ACPI_EVENT_PMTIMER 0
722#define ACPI_EVENT_GLOBAL 1
723#define ACPI_EVENT_POWER_BUTTON 2
724#define ACPI_EVENT_SLEEP_BUTTON 3
725#define ACPI_EVENT_RTC 4
726#define ACPI_EVENT_MAX 4
727#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
728
729/*
730 * Event status - Per event
731 * -------------
732 * The encoding of acpi_event_status is illustrated below.
733 * Note that a set bit (1) indicates the property is TRUE
734 * (e.g. if bit 0 is set then the event is enabled).
735 * +-------------+-+-+-+-+-+
736 * | Bits 31:5 |4|3|2|1|0|
737 * +-------------+-+-+-+-+-+
738 * | | | | | |
739 * | | | | | +- Enabled?
740 * | | | | +--- Enabled for wake?
741 * | | | +----- Status bit set?
742 * | | +------- Enable bit set?
743 * | +--------- Has a handler?
744 * +--------------- <Reserved>
745 */
746typedef u32 acpi_event_status;
747
748#define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00
749#define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
750#define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
751#define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04
752#define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08
753#define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10
754#define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET
755
756/* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
757
758#define ACPI_GPE_ENABLE 0
759#define ACPI_GPE_DISABLE 1
760#define ACPI_GPE_CONDITIONAL_ENABLE 2
761
762/*
763 * GPE info flags - Per GPE
764 * +-------+-+-+---+
765 * | 7:5 |4|3|2:0|
766 * +-------+-+-+---+
767 * | | | |
768 * | | | +-- Type of dispatch:to method, handler, notify, or none
769 * | | +----- Interrupt type: edge or level triggered
770 * | +------- Is a Wake GPE
771 * +------------ <Reserved>
772 */
773#define ACPI_GPE_DISPATCH_NONE (u8) 0x00
774#define ACPI_GPE_DISPATCH_METHOD (u8) 0x01
775#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02
776#define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03
777#define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04
778#define ACPI_GPE_DISPATCH_MASK (u8) 0x07
779#define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK))
780
781#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08
782#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
783#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08
784
785#define ACPI_GPE_CAN_WAKE (u8) 0x10
786
787/*
788 * Flags for GPE and Lock interfaces
789 */
790#define ACPI_NOT_ISR 0x1
791#define ACPI_ISR 0x0
792
793/* Notify types */
794
795#define ACPI_SYSTEM_NOTIFY 0x1
796#define ACPI_DEVICE_NOTIFY 0x2
797#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
798#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
799#define ACPI_NUM_NOTIFY_TYPES 2
800
801#define ACPI_MAX_SYS_NOTIFY 0x7F
802#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
803
804#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
805#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
806
807/* Address Space (Operation Region) Types */
808
809typedef u8 acpi_adr_space_type;
810
811#define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0
812#define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1
813#define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2
814#define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3
815#define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
816#define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
817#define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
818#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
819#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
820#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
821#define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
822
823#define ACPI_NUM_PREDEFINED_REGIONS 11
824
825/*
826 * Special Address Spaces
827 *
828 * Note: A Data Table region is a special type of operation region
829 * that has its own AML opcode. However, internally, the AML
830 * interpreter simply creates an operation region with an an address
831 * space type of ACPI_ADR_SPACE_DATA_TABLE.
832 */
833#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */
834#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F
835
836/* Values for _REG connection code */
837
838#define ACPI_REG_DISCONNECT 0
839#define ACPI_REG_CONNECT 1
840
841/*
842 * bit_register IDs
843 *
844 * These values are intended to be used by the hardware interfaces
845 * and are mapped to individual bitfields defined within the ACPI
846 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
847 * for this mapping.
848 */
849
850/* PM1 Status register */
851
852#define ACPI_BITREG_TIMER_STATUS 0x00
853#define ACPI_BITREG_BUS_MASTER_STATUS 0x01
854#define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02
855#define ACPI_BITREG_POWER_BUTTON_STATUS 0x03
856#define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04
857#define ACPI_BITREG_RT_CLOCK_STATUS 0x05
858#define ACPI_BITREG_WAKE_STATUS 0x06
859#define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07
860
861/* PM1 Enable register */
862
863#define ACPI_BITREG_TIMER_ENABLE 0x08
864#define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09
865#define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A
866#define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B
867#define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C
868#define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D
869
870/* PM1 Control register */
871
872#define ACPI_BITREG_SCI_ENABLE 0x0E
873#define ACPI_BITREG_BUS_MASTER_RLD 0x0F
874#define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10
875#define ACPI_BITREG_SLEEP_TYPE 0x11
876#define ACPI_BITREG_SLEEP_ENABLE 0x12
877
878/* PM2 Control register */
879
880#define ACPI_BITREG_ARB_DISABLE 0x13
881
882#define ACPI_BITREG_MAX 0x13
883#define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1
884
885/* Status register values. A 1 clears a status bit. 0 = no effect */
886
887#define ACPI_CLEAR_STATUS 1
888
889/* Enable and Control register values */
890
891#define ACPI_ENABLE_EVENT 1
892#define ACPI_DISABLE_EVENT 0
893
894/* Sleep function dispatch */
895
896typedef acpi_status (*acpi_sleep_function) (u8 sleep_state);
897
898struct acpi_sleep_functions {
899 acpi_sleep_function legacy_function;
900 acpi_sleep_function extended_function;
901};
902
903/*
904 * External ACPI object definition
905 */
906
907/*
908 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element
909 * or an unresolved named reference.
910 */
911union acpi_object {
912 acpi_object_type type; /* See definition of acpi_ns_type for values */
913 struct {
914 acpi_object_type type; /* ACPI_TYPE_INTEGER */
915 u64 value; /* The actual number */
916 } integer;
917
918 struct {
919 acpi_object_type type; /* ACPI_TYPE_STRING */
920 u32 length; /* # of bytes in string, excluding trailing null */
921 char *pointer; /* points to the string value */
922 } string;
923
924 struct {
925 acpi_object_type type; /* ACPI_TYPE_BUFFER */
926 u32 length; /* # of bytes in buffer */
927 u8 *pointer; /* points to the buffer */
928 } buffer;
929
930 struct {
931 acpi_object_type type; /* ACPI_TYPE_PACKAGE */
932 u32 count; /* # of elements in package */
933 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */
934 } package;
935
936 struct {
937 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */
938 acpi_object_type actual_type; /* Type associated with the Handle */
939 acpi_handle handle; /* object reference */
940 } reference;
941
942 struct {
943 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */
944 u32 proc_id;
945 acpi_io_address pblk_address;
946 u32 pblk_length;
947 } processor;
948
949 struct {
950 acpi_object_type type; /* ACPI_TYPE_POWER */
951 u32 system_level;
952 u32 resource_order;
953 } power_resource;
954};
955
956/*
957 * List of objects, used as a parameter list for control method evaluation
958 */
959struct acpi_object_list {
960 u32 count;
961 union acpi_object *pointer;
962};
963
964/*
965 * Miscellaneous common Data Structures used by the interfaces
966 */
967#define ACPI_NO_BUFFER 0
968
969#ifdef ACPI_NO_MEM_ALLOCATIONS
970
971#define ACPI_ALLOCATE_BUFFER (acpi_size) (0)
972#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0)
973
974#else /* ACPI_NO_MEM_ALLOCATIONS */
975
976#define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */
977#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */
978
979#endif /* ACPI_NO_MEM_ALLOCATIONS */
980
981struct acpi_buffer {
982 acpi_size length; /* Length in bytes of the buffer */
983 void *pointer; /* pointer to buffer */
984};
985
986/*
987 * name_type for acpi_get_name
988 */
989#define ACPI_FULL_PATHNAME 0
990#define ACPI_SINGLE_NAME 1
991#define ACPI_FULL_PATHNAME_NO_TRAILING 2
992#define ACPI_NAME_TYPE_MAX 2
993
994/*
995 * Predefined Namespace items
996 */
997struct acpi_predefined_names {
998 const char *name;
999 u8 type;
1000 char *val;
1001};
1002
1003/*
1004 * Structure and flags for acpi_get_system_info
1005 */
1006#define ACPI_SYS_MODE_UNKNOWN 0x0000
1007#define ACPI_SYS_MODE_ACPI 0x0001
1008#define ACPI_SYS_MODE_LEGACY 0x0002
1009#define ACPI_SYS_MODES_MASK 0x0003
1010
1011/*
1012 * System info returned by acpi_get_system_info()
1013 */
1014struct acpi_system_info {
1015 u32 acpi_ca_version;
1016 u32 flags;
1017 u32 timer_resolution;
1018 u32 reserved1;
1019 u32 reserved2;
1020 u32 debug_level;
1021 u32 debug_layer;
1022};
1023
1024/*
1025 * System statistics returned by acpi_get_statistics()
1026 */
1027struct acpi_statistics {
1028 u32 sci_count;
1029 u32 gpe_count;
1030 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS];
1031 u32 method_count;
1032};
1033
1034/* Table Event Types */
1035
1036#define ACPI_TABLE_EVENT_LOAD 0x0
1037#define ACPI_TABLE_EVENT_UNLOAD 0x1
1038#define ACPI_NUM_TABLE_EVENTS 2
1039
1040/*
1041 * Types specific to the OS service interfaces
1042 */
1043typedef u32
1044 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
1045
1046typedef void
1047 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
1048
1049/*
1050 * Various handlers and callback procedures
1051 */
1052typedef
1053u32 (*acpi_sci_handler) (void *context);
1054
1055typedef
1056void (*acpi_gbl_event_handler) (u32 event_type,
1057 acpi_handle device,
1058 u32 event_number, void *context);
1059
1060#define ACPI_EVENT_TYPE_GPE 0
1061#define ACPI_EVENT_TYPE_FIXED 1
1062
1063typedef
1064u32(*acpi_event_handler) (void *context);
1065
1066typedef
1067u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
1068
1069typedef
1070void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
1071
1072typedef
1073void (*acpi_object_handler) (acpi_handle object, void *data);
1074
1075typedef
1076acpi_status (*acpi_init_handler) (acpi_handle object, u32 function);
1077
1078#define ACPI_INIT_DEVICE_INI 1
1079
1080typedef
1081acpi_status (*acpi_exception_handler) (acpi_status aml_status,
1082 acpi_name name,
1083 u16 opcode,
1084 u32 aml_offset, void *context);
1085
1086/* Table Event handler (Load, load_table, etc.) and types */
1087
1088typedef
1089acpi_status (*acpi_table_handler) (u32 event, void *table, void *context);
1090
1091#define ACPI_TABLE_LOAD 0x0
1092#define ACPI_TABLE_UNLOAD 0x1
1093#define ACPI_NUM_TABLE_EVENTS 2
1094
1095/* Address Spaces (For Operation Regions) */
1096
1097typedef
1098acpi_status (*acpi_adr_space_handler) (u32 function,
1099 acpi_physical_address address,
1100 u32 bit_width,
1101 u64 *value,
1102 void *handler_context,
1103 void *region_context);
1104
1105#define ACPI_DEFAULT_HANDLER NULL
1106
1107/* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
1108
1109struct acpi_connection_info {
1110 u8 *connection;
1111 u16 length;
1112 u8 access_length;
1113};
1114
1115typedef
1116acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle,
1117 u32 function,
1118 void *handler_context,
1119 void **region_context);
1120
1121#define ACPI_REGION_ACTIVATE 0
1122#define ACPI_REGION_DEACTIVATE 1
1123
1124typedef
1125acpi_status (*acpi_walk_callback) (acpi_handle object,
1126 u32 nesting_level,
1127 void *context, void **return_value);
1128
1129typedef
1130u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
1131
1132/* Interrupt handler return values */
1133
1134#define ACPI_INTERRUPT_NOT_HANDLED 0x00
1135#define ACPI_INTERRUPT_HANDLED 0x01
1136
1137/* GPE handler return values */
1138
1139#define ACPI_REENABLE_GPE 0x80
1140
1141/* Length of 32-bit EISAID values when converted back to a string */
1142
1143#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */
1144
1145/* Length of UUID (string) values */
1146
1147#define ACPI_UUID_LENGTH 16
1148
1149/* Length of 3-byte PCI class code values when converted back to a string */
1150
1151#define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */
1152
1153/* Structures used for device/processor HID, UID, CID */
1154
1155struct acpi_pnp_device_id {
1156 u32 length; /* Length of string + null */
1157 char *string;
1158};
1159
1160struct acpi_pnp_device_id_list {
1161 u32 count; /* Number of IDs in Ids array */
1162 u32 list_size; /* Size of list, including ID strings */
1163 struct acpi_pnp_device_id ids[1]; /* ID array */
1164};
1165
1166/*
1167 * Structure returned from acpi_get_object_info.
1168 * Optimized for both 32- and 64-bit builds
1169 */
1170struct acpi_device_info {
1171 u32 info_size; /* Size of info, including ID strings */
1172 u32 name; /* ACPI object Name */
1173 acpi_object_type type; /* ACPI object Type */
1174 u8 param_count; /* If a method, required parameter count */
1175 u16 valid; /* Indicates which optional fields are valid */
1176 u8 flags; /* Miscellaneous info */
1177 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
1178 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
1179 u32 current_status; /* _STA value */
1180 u64 address; /* _ADR value */
1181 struct acpi_pnp_device_id hardware_id; /* _HID value */
1182 struct acpi_pnp_device_id unique_id; /* _UID value */
1183 struct acpi_pnp_device_id class_code; /* _CLS value */
1184 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
1185};
1186
1187/* Values for Flags field above (acpi_get_object_info) */
1188
1189#define ACPI_PCI_ROOT_BRIDGE 0x01
1190
1191/* Flags for Valid field above (acpi_get_object_info) */
1192
1193#define ACPI_VALID_STA 0x0001
1194#define ACPI_VALID_ADR 0x0002
1195#define ACPI_VALID_HID 0x0004
1196#define ACPI_VALID_UID 0x0008
1197#define ACPI_VALID_CID 0x0020
1198#define ACPI_VALID_CLS 0x0040
1199#define ACPI_VALID_SXDS 0x0100
1200#define ACPI_VALID_SXWS 0x0200
1201
1202/* Flags for _STA method */
1203
1204#define ACPI_STA_DEVICE_PRESENT 0x01
1205#define ACPI_STA_DEVICE_ENABLED 0x02
1206#define ACPI_STA_DEVICE_UI 0x04
1207#define ACPI_STA_DEVICE_FUNCTIONING 0x08
1208#define ACPI_STA_DEVICE_OK 0x08 /* Synonym */
1209#define ACPI_STA_BATTERY_PRESENT 0x10
1210
1211/* Context structs for address space handlers */
1212
1213struct acpi_pci_id {
1214 u16 segment;
1215 u16 bus;
1216 u16 device;
1217 u16 function;
1218};
1219
1220struct acpi_mem_space_context {
1221 u32 length;
1222 acpi_physical_address address;
1223 acpi_physical_address mapped_physical_address;
1224 u8 *mapped_logical_address;
1225 acpi_size mapped_length;
1226};
1227
1228/*
1229 * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1230 */
1231struct acpi_memory_list {
1232 const char *list_name;
1233 void *list_head;
1234 u16 object_size;
1235 u16 max_depth;
1236 u16 current_depth;
1237
1238#ifdef ACPI_DBG_TRACK_ALLOCATIONS
1239
1240 /* Statistics for debug memory tracking only */
1241
1242 u32 total_allocated;
1243 u32 total_freed;
1244 u32 max_occupied;
1245 u32 total_size;
1246 u32 current_total_size;
1247 u32 requests;
1248 u32 hits;
1249#endif
1250};
1251
1252/* Definitions of trace event types */
1253
1254typedef enum {
1255 ACPI_TRACE_AML_METHOD,
1256 ACPI_TRACE_AML_OPCODE,
1257 ACPI_TRACE_AML_REGION
1258} acpi_trace_event_type;
1259
1260/* Definitions of _OSI support */
1261
1262#define ACPI_VENDOR_STRINGS 0x01
1263#define ACPI_FEATURE_STRINGS 0x02
1264#define ACPI_ENABLE_INTERFACES 0x00
1265#define ACPI_DISABLE_INTERFACES 0x04
1266
1267#define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1268#define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1269#define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1270#define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1271#define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1272#define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1273
1274#define ACPI_OSI_WIN_2000 0x01
1275#define ACPI_OSI_WIN_XP 0x02
1276#define ACPI_OSI_WIN_XP_SP1 0x03
1277#define ACPI_OSI_WINSRV_2003 0x04
1278#define ACPI_OSI_WIN_XP_SP2 0x05
1279#define ACPI_OSI_WINSRV_2003_SP1 0x06
1280#define ACPI_OSI_WIN_VISTA 0x07
1281#define ACPI_OSI_WINSRV_2008 0x08
1282#define ACPI_OSI_WIN_VISTA_SP1 0x09
1283#define ACPI_OSI_WIN_VISTA_SP2 0x0A
1284#define ACPI_OSI_WIN_7 0x0B
1285#define ACPI_OSI_WIN_8 0x0C
1286#define ACPI_OSI_WIN_10 0x0D
1287
1288/* Definitions of file IO */
1289
1290#define ACPI_FILE_READING 0x01
1291#define ACPI_FILE_WRITING 0x02
1292#define ACPI_FILE_BINARY 0x04
1293
1294#define ACPI_FILE_BEGIN 0x01
1295#define ACPI_FILE_END 0x02
1296
1297/* Definitions of getopt */
1298
1299#define ACPI_OPT_END -1
1300
1301#endif /* __ACTYPES_H__ */