tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
3 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
9#include <dt-bindings/clock/stih407-clks.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/media/c8sectpfe.h>
12/ {
13 soc {
14 sbc_serial0: serial@9530000 {
15 status = "okay";
16 };
17
18 leds {
19 compatible = "gpio-leds";
20 red {
21 #gpio-cells = <2>;
22 label = "Front Panel LED";
23 gpios = <&pio4 1 0>;
24 linux,default-trigger = "heartbeat";
25 };
26 green {
27 #gpio-cells = <2>;
28 gpios = <&pio1 3 0>;
29 default-state = "off";
30 };
31 };
32
33 pwm0: pwm@9810000 {
34 status = "okay";
35 };
36
37 pwm1: pwm@9510000 {
38 status = "okay";
39 };
40
41 ssc2: i2c@9842000 {
42 status = "okay";
43 clock-frequency = <100000>;
44 st,i2c-min-scl-pulse-width-us = <0>;
45 st,i2c-min-sda-pulse-width-us = <5>;
46 };
47
48 ssc3: i2c@9843000 {
49 status = "okay";
50 clock-frequency = <100000>;
51 st,i2c-min-scl-pulse-width-us = <0>;
52 st,i2c-min-sda-pulse-width-us = <5>;
53 };
54
55 i2c@9844000 {
56 status = "okay";
57 };
58
59 i2c@9845000 {
60 status = "okay";
61 };
62
63 i2c@9540000 {
64 status = "okay";
65 };
66
67 mmc0: sdhci@09060000 {
68 status = "okay";
69 };
70
71 mmc1: sdhci@09080000 {
72 status = "okay";
73 };
74
75 /* SSC11 to HDMI */
76 hdmiddc: i2c@9541000 {
77 status = "okay";
78 /* HDMI V1.3a supports Standard mode only */
79 clock-frequency = <100000>;
80 st,i2c-min-scl-pulse-width-us = <0>;
81 st,i2c-min-sda-pulse-width-us = <5>;
82 };
83
84 miphy28lp_phy: miphy28lp@9b22000 {
85
86 phy_port0: port@9b22000 {
87 st,osc-rdy;
88 };
89
90 phy_port1: port@9b2a000 {
91 st,osc-force-ext;
92 };
93 };
94
95 st_dwc3: dwc3@8f94000 {
96 status = "okay";
97 };
98
99 ethernet0: dwmac@9630000 {
100 st,tx-retime-src = "clkgen";
101 status = "okay";
102 phy-mode = "rgmii";
103 fixed-link = <0 1 1000 0 0>;
104 };
105
106 demux@08a20000 {
107 compatible = "st,stih407-c8sectpfe";
108 status = "okay";
109 reg = <0x08a20000 0x10000>,
110 <0x08a00000 0x4000>;
111 reg-names = "c8sectpfe", "c8sectpfe-ram";
112 interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>,
113 <GIC_SPI 35 IRQ_TYPE_NONE>;
114 interrupt-names = "c8sectpfe-error-irq",
115 "c8sectpfe-idle-irq";
116 pinctrl-0 = <&pinctrl_tsin0_serial>;
117 pinctrl-1 = <&pinctrl_tsin0_parallel>;
118 pinctrl-2 = <&pinctrl_tsin3_serial>;
119 pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
120 pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
121 pinctrl-names = "tsin0-serial",
122 "tsin0-parallel",
123 "tsin3-serial",
124 "tsin4-serial",
125 "tsin5-serial";
126 clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
127 clock-names = "c8sectpfe";
128
129 /* tsin0 is TSA on NIMA */
130 tsin0: port@0 {
131 tsin-num = <0>;
132 serial-not-parallel;
133 i2c-bus = <&ssc2>;
134 reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
135 dvb-card = <STV0367_TDA18212_NIMA_1>;
136 };
137 };
138 };
139};