tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#include "qcom-apq8064-v2.0.dtsi"
2#include <dt-bindings/gpio/gpio.h>
3#include <dt-bindings/input/input.h>
4#include <dt-bindings/mfd/qcom-rpm.h>
5#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
6
7/ {
8 model = "Sony Xperia Z";
9 compatible = "sony,xperia-yuga", "qcom,apq8064";
10
11 aliases {
12 serial0 = &gsbi5_serial;
13 };
14
15 chosen {
16 stdout-path = "serial0:115200n8";
17 };
18
19 gpio-keys {
20 compatible = "gpio-keys";
21 input-name = "gpio-keys";
22
23 pinctrl-names = "default";
24 pinctrl-0 = <&gpio_keys_pin_a>;
25
26 camera-focus {
27 label = "camera_focus";
28 gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
29 linux,input-type = <1>;
30 linux,code = <KEY_CAMERA_FOCUS>;
31 };
32
33 camera-snapshot {
34 label = "camera_snapshot";
35 gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
36 linux,input-type = <1>;
37 linux,code = <KEY_CAMERA>;
38 };
39
40 volume-down {
41 label = "volume_down";
42 gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
43 linux,input-type = <1>;
44 linux,code = <KEY_VOLUMEDOWN>;
45 };
46
47 volume-up {
48 label = "volume_up";
49 gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
50 linux,input-type = <1>;
51 linux,code = <KEY_VOLUMEUP>;
52 };
53 };
54
55 soc {
56 pinctrl@800000 {
57 gsbi5_uart_pin_a: gsbi5-uart-pin-active {
58 rx {
59 pins = "gpio52";
60 function = "gsbi5";
61 drive-strength = <2>;
62 bias-pull-up;
63 };
64
65 tx {
66 pins = "gpio51";
67 function = "gsbi5";
68 drive-strength = <4>;
69 bias-disable;
70 };
71 };
72
73 sdcc1_pin_a: sdcc1-pin-active {
74 clk {
75 pins = "sdc1_clk";
76 drive-strengh = <16>;
77 bias-disable;
78 };
79
80 cmd {
81 pins = "sdc1_cmd";
82 drive-strengh = <10>;
83 bias-pull-up;
84 };
85
86 data {
87 pins = "sdc1_data";
88 drive-strengh = <10>;
89 bias-pull-up;
90 };
91 };
92
93 sdcc3_pin_a: sdcc3-pin-active {
94 clk {
95 pins = "sdc3_clk";
96 drive-strengh = <8>;
97 bias-disable;
98 };
99
100 cmd {
101 pins = "sdc3_cmd";
102 drive-strengh = <8>;
103 bias-pull-up;
104 };
105
106 data {
107 pins = "sdc3_data";
108 drive-strengh = <8>;
109 bias-pull-up;
110 };
111 };
112
113 sdcc3_cd_pin_a: sdcc3-cd-pin-active {
114 pins = "gpio26";
115 function = "gpio";
116
117 drive-strength = <2>;
118 bias-disable;
119 };
120 };
121
122
123 rpm@108000 {
124 regulators {
125 vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
126 vin_lvs_1_3_6-supply = <&pm8921_s4>;
127 vin_lvs_4_5_7-supply = <&pm8921_s4>;
128 vin_ncp-supply = <&pm8921_l6>;
129 vin_lvs2-supply = <&pm8921_s4>;
130 vin_l24-supply = <&pm8921_s1>;
131 vin_l25-supply = <&pm8921_s1>;
132 vin_l27-supply = <&pm8921_s7>;
133 vin_l28-supply = <&pm8921_s7>;
134
135 /* Buck SMPS */
136 s1 {
137 regulator-always-on;
138 regulator-min-microvolt = <1225000>;
139 regulator-max-microvolt = <1225000>;
140 qcom,switch-mode-frequency = <3200000>;
141 bias-pull-down;
142 };
143
144 s2 {
145 regulator-min-microvolt = <1300000>;
146 regulator-max-microvolt = <1300000>;
147 qcom,switch-mode-frequency = <1600000>;
148 bias-pull-down;
149 };
150
151 s3 {
152 regulator-min-microvolt = <500000>;
153 regulator-max-microvolt = <1150000>;
154 qcom,switch-mode-frequency = <4800000>;
155 bias-pull-down;
156 };
157
158 s4 {
159 regulator-always-on;
160 regulator-min-microvolt = <1800000>;
161 regulator-max-microvolt = <1800000>;
162 qcom,switch-mode-frequency = <1600000>;
163 bias-pull-down;
164 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
165 };
166
167 s7 {
168 regulator-min-microvolt = <1300000>;
169 regulator-max-microvolt = <1300000>;
170 qcom,switch-mode-frequency = <3200000>;
171 };
172
173 s8 {
174 regulator-min-microvolt = <2200000>;
175 regulator-max-microvolt = <2200000>;
176 qcom,switch-mode-frequency = <1600000>;
177 };
178
179 /* PMOS LDO */
180 l1 {
181 regulator-always-on;
182 regulator-min-microvolt = <1100000>;
183 regulator-max-microvolt = <1100000>;
184 bias-pull-down;
185 };
186
187 l2 {
188 regulator-min-microvolt = <1200000>;
189 regulator-max-microvolt = <1200000>;
190 bias-pull-down;
191 };
192
193 l3 {
194 regulator-min-microvolt = <3075000>;
195 regulator-max-microvolt = <3075000>;
196 bias-pull-down;
197 };
198
199 l4 {
200 regulator-always-on;
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <1800000>;
203 bias-pull-down;
204 };
205
206 l5 {
207 regulator-min-microvolt = <2950000>;
208 regulator-max-microvolt = <2950000>;
209 bias-pull-down;
210 };
211
212 l6 {
213 regulator-min-microvolt = <2950000>;
214 regulator-max-microvolt = <2950000>;
215 bias-pull-down;
216 };
217
218 l7 {
219 regulator-min-microvolt = <1850000>;
220 regulator-max-microvolt = <2950000>;
221 bias-pull-down;
222 };
223
224 l8 {
225 regulator-min-microvolt = <2800000>;
226 regulator-max-microvolt = <2800000>;
227 bias-pull-down;
228 };
229
230 l9 {
231 regulator-min-microvolt = <3000000>;
232 regulator-max-microvolt = <3000000>;
233 bias-pull-down;
234 };
235
236 l10 {
237 regulator-min-microvolt = <2900000>;
238 regulator-max-microvolt = <2900000>;
239 bias-pull-down;
240 };
241
242 l11 {
243 regulator-min-microvolt = <3000000>;
244 regulator-max-microvolt = <3000000>;
245 bias-pull-down;
246 };
247
248 l12 {
249 regulator-min-microvolt = <1200000>;
250 regulator-max-microvolt = <1200000>;
251 bias-pull-down;
252 };
253
254 l14 {
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <1800000>;
257 bias-pull-down;
258 };
259
260 l15 {
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <2950000>;
263 bias-pull-down;
264 };
265
266 l16 {
267 regulator-min-microvolt = <2800000>;
268 regulator-max-microvolt = <2800000>;
269 bias-pull-down;
270 };
271
272 l17 {
273 regulator-min-microvolt = <2000000>;
274 regulator-max-microvolt = <2000000>;
275 bias-pull-down;
276 };
277
278 l18 {
279 regulator-min-microvolt = <1200000>;
280 regulator-max-microvolt = <1200000>;
281 bias-pull-down;
282 };
283
284 l21 {
285 regulator-min-microvolt = <1050000>;
286 regulator-max-microvolt = <1050000>;
287 bias-pull-down;
288 };
289
290 l22 {
291 regulator-min-microvolt = <2600000>;
292 regulator-max-microvolt = <2600000>;
293 bias-pull-down;
294 };
295
296 l23 {
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <1800000>;
299 bias-pull-down;
300 };
301
302 l24 {
303 regulator-min-microvolt = <750000>;
304 regulator-max-microvolt = <1150000>;
305 bias-pull-down;
306 };
307
308 l25 {
309 regulator-always-on;
310 regulator-min-microvolt = <1250000>;
311 regulator-max-microvolt = <1250000>;
312 bias-pull-down;
313 };
314
315 l27 {
316 regulator-min-microvolt = <1100000>;
317 regulator-max-microvolt = <1100000>;
318 };
319
320 l28 {
321 regulator-min-microvolt = <1050000>;
322 regulator-max-microvolt = <1050000>;
323 bias-pull-down;
324 };
325
326 l29 {
327 regulator-min-microvolt = <2000000>;
328 regulator-max-microvolt = <2000000>;
329 bias-pull-down;
330 };
331
332 /* Low Voltage Switch */
333 lvs1 {
334 bias-pull-down;
335 };
336
337 lvs2 {
338 bias-pull-down;
339 };
340
341 lvs3 {
342 bias-pull-down;
343 };
344
345 lvs4 {
346 bias-pull-down;
347 };
348
349 lvs5 {
350 bias-pull-down;
351 };
352
353 lvs6 {
354 bias-pull-down;
355 };
356
357 lvs7 {
358 bias-pull-down;
359 };
360
361 usb-switch {};
362
363 hdmi-switch {};
364
365 ncp {
366 regulator-min-microvolt = <1800000>;
367 regulator-max-microvolt = <1800000>;
368 qcom,switch-mode-frequency = <1600000>;
369 };
370 };
371 };
372
373 qcom,ssbi@500000 {
374 pmic@0 {
375 gpio@150 {
376 gpio_keys_pin_a: gpio-keys-pin-active {
377 pins = "gpio3", "gpio4", "gpio29", "gpio35";
378 function = "normal";
379
380 bias-pull-up;
381 drive-push-pull;
382 input-enable;
383 power-source = <2>;
384 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
385 qcom,pull-up-strength = <0>;
386 };
387 };
388 };
389 };
390
391 phy@12500000 {
392 status = "okay";
393 vddcx-supply = <&pm8921_s3>;
394 v3p3-supply = <&pm8921_l3>;
395 v1p8-supply = <&pm8921_l4>;
396 };
397
398 gadget@12500000 {
399 status = "okay";
400 };
401
402 gsbi@1a200000 {
403 status = "ok"
404 qcom,mode = <GSBI_PROT_I2C_UART>;
405
406 serial@1a240000 {
407 status = "ok"
408
409 pinctrl-names = "default";
410 pinctrl-0 = <&gsbi5_uart_pin_a>;
411 };
412 };
413
414 amba {
415 sdcc1: sdcc@12400000 {
416 status = "okay";
417
418 vmmc-supply = <&pm8921_l5>;
419 vqmmc-supply = <&pm8921_s4>;
420
421 pinctrl-names = "default";
422 pinctrl-0 = <&sdcc1_pin_a>;
423 };
424
425 sdcc3: sdcc@12180000 {
426 status = "okay";
427
428 vmmc-supply = <&pm8921_l6>;
429 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
430
431 pinctrl-names = "default";
432 pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
433 };
434 };
435 };
436};