at v4.4 11 kB view raw
1/* 2 * Copyright 2010 Tilera Corporation. All Rights Reserved. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * as published by the Free Software Foundation, version 2. 7 * 8 * This program is distributed in the hope that it will be useful, but 9 * WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 11 * NON INFRINGEMENT. See the GNU General Public License for 12 * more details. 13 */ 14 15#ifndef _ASM_TILE_PROCESSOR_H 16#define _ASM_TILE_PROCESSOR_H 17 18#include <arch/chip.h> 19 20#ifndef __ASSEMBLY__ 21 22/* 23 * NOTE: we don't include <linux/ptrace.h> or <linux/percpu.h> as one 24 * normally would, due to #include dependencies. 25 */ 26#include <linux/types.h> 27#include <asm/ptrace.h> 28#include <asm/percpu.h> 29 30#include <arch/spr_def.h> 31 32struct task_struct; 33struct thread_struct; 34 35typedef struct { 36 unsigned long seg; 37} mm_segment_t; 38 39/* 40 * Default implementation of macro that returns current 41 * instruction pointer ("program counter"). 42 */ 43void *current_text_addr(void); 44 45#if CHIP_HAS_TILE_DMA() 46/* Capture the state of a suspended DMA. */ 47struct tile_dma_state { 48 int enabled; 49 unsigned long src; 50 unsigned long dest; 51 unsigned long strides; 52 unsigned long chunk_size; 53 unsigned long src_chunk; 54 unsigned long dest_chunk; 55 unsigned long byte; 56 unsigned long status; 57}; 58 59/* 60 * A mask of the DMA status register for selecting only the 'running' 61 * and 'done' bits. 62 */ 63#define DMA_STATUS_MASK \ 64 (SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK) 65#endif 66 67/* 68 * Track asynchronous TLB events (faults and access violations) 69 * that occur while we are in kernel mode from DMA or the SN processor. 70 */ 71struct async_tlb { 72 short fault_num; /* original fault number; 0 if none */ 73 char is_fault; /* was it a fault (vs an access violation) */ 74 char is_write; /* for fault: was it caused by a write? */ 75 unsigned long address; /* what address faulted? */ 76}; 77 78#ifdef CONFIG_HARDWALL 79struct hardwall_info; 80struct hardwall_task { 81 /* Which hardwall is this task tied to? (or NULL if none) */ 82 struct hardwall_info *info; 83 /* Chains this task into the list at info->task_head. */ 84 struct list_head list; 85}; 86#ifdef __tilepro__ 87#define HARDWALL_TYPES 1 /* udn */ 88#else 89#define HARDWALL_TYPES 3 /* udn, idn, and ipi */ 90#endif 91#endif 92 93struct thread_struct { 94 /* kernel stack pointer */ 95 unsigned long ksp; 96 /* kernel PC */ 97 unsigned long pc; 98 /* starting user stack pointer (for page migration) */ 99 unsigned long usp0; 100 /* pid of process that created this one */ 101 pid_t creator_pid; 102#if CHIP_HAS_TILE_DMA() 103 /* DMA info for suspended threads (byte == 0 means no DMA state) */ 104 struct tile_dma_state tile_dma_state; 105#endif 106 /* User EX_CONTEXT registers */ 107 unsigned long ex_context[2]; 108 /* User SYSTEM_SAVE registers */ 109 unsigned long system_save[4]; 110 /* User interrupt mask */ 111 unsigned long long interrupt_mask; 112 /* User interrupt-control 0 state */ 113 unsigned long intctrl_0; 114 /* Any other miscellaneous processor state bits */ 115 unsigned long proc_status; 116#if !CHIP_HAS_FIXED_INTVEC_BASE() 117 /* Interrupt base for PL0 interrupts */ 118 unsigned long interrupt_vector_base; 119#endif 120 /* Tile cache retry fifo high-water mark */ 121 unsigned long tile_rtf_hwm; 122#if CHIP_HAS_DSTREAM_PF() 123 /* Data stream prefetch control */ 124 unsigned long dstream_pf; 125#endif 126#ifdef CONFIG_HARDWALL 127 /* Hardwall information for various resources. */ 128 struct hardwall_task hardwall[HARDWALL_TYPES]; 129#endif 130#if CHIP_HAS_TILE_DMA() 131 /* Async DMA TLB fault information */ 132 struct async_tlb dma_async_tlb; 133#endif 134}; 135 136#endif /* !__ASSEMBLY__ */ 137 138/* 139 * Start with "sp" this many bytes below the top of the kernel stack. 140 * This allows us to be cache-aware when handling the initial save 141 * of the pt_regs value to the stack. 142 */ 143#define STACK_TOP_DELTA 64 144 145/* 146 * When entering the kernel via a fault, start with the top of the 147 * pt_regs structure this many bytes below the top of the page. 148 * This aligns the pt_regs structure optimally for cache-line access. 149 */ 150#ifdef __tilegx__ 151#define KSTK_PTREGS_GAP 48 152#else 153#define KSTK_PTREGS_GAP 56 154#endif 155 156#ifndef __ASSEMBLY__ 157 158#ifdef __tilegx__ 159#define TASK_SIZE_MAX (_AC(1, UL) << (MAX_VA_WIDTH - 1)) 160#else 161#define TASK_SIZE_MAX PAGE_OFFSET 162#endif 163 164/* TASK_SIZE and related variables are always checked in "current" context. */ 165#ifdef CONFIG_COMPAT 166#define COMPAT_TASK_SIZE (1UL << 31) 167#define TASK_SIZE ((current_thread_info()->status & TS_COMPAT) ?\ 168 COMPAT_TASK_SIZE : TASK_SIZE_MAX) 169#else 170#define TASK_SIZE TASK_SIZE_MAX 171#endif 172 173#define VDSO_BASE ((unsigned long)current->active_mm->context.vdso_base) 174#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) 175 176#define STACK_TOP TASK_SIZE 177 178/* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */ 179#define STACK_TOP_MAX TASK_SIZE_MAX 180 181/* 182 * This decides where the kernel will search for a free chunk of vm 183 * space during mmap's, if it is using bottom-up mapping. 184 */ 185#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) 186 187#define HAVE_ARCH_PICK_MMAP_LAYOUT 188 189#define INIT_THREAD { \ 190 .ksp = (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA, \ 191 .interrupt_mask = -1ULL \ 192} 193 194/* Kernel stack top for the task that first boots on this cpu. */ 195DECLARE_PER_CPU(unsigned long, boot_sp); 196 197/* PC to boot from on this cpu. */ 198DECLARE_PER_CPU(unsigned long, boot_pc); 199 200/* Do necessary setup to start up a newly executed thread. */ 201static inline void start_thread(struct pt_regs *regs, 202 unsigned long pc, unsigned long usp) 203{ 204 regs->pc = pc; 205 regs->sp = usp; 206 single_step_execve(); 207} 208 209/* Free all resources held by a thread. */ 210static inline void release_thread(struct task_struct *dead_task) 211{ 212 /* Nothing for now */ 213} 214 215extern int do_work_pending(struct pt_regs *regs, u32 flags); 216 217 218/* 219 * Return saved (kernel) PC of a blocked thread. 220 * Only used in a printk() in kernel/sched/core.c, so don't work too hard. 221 */ 222#define thread_saved_pc(t) ((t)->thread.pc) 223 224unsigned long get_wchan(struct task_struct *p); 225 226/* Return initial ksp value for given task. */ 227#define task_ksp0(task) \ 228 ((unsigned long)(task)->stack + THREAD_SIZE - STACK_TOP_DELTA) 229 230/* Return some info about the user process TASK. */ 231#define task_pt_regs(task) \ 232 ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1) 233#define current_pt_regs() \ 234 ((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \ 235 STACK_TOP_DELTA - (KSTK_PTREGS_GAP - 1)) - 1) 236#define task_sp(task) (task_pt_regs(task)->sp) 237#define task_pc(task) (task_pt_regs(task)->pc) 238/* Aliases for pc and sp (used in fs/proc/array.c) */ 239#define KSTK_EIP(task) task_pc(task) 240#define KSTK_ESP(task) task_sp(task) 241 242/* Fine-grained unaligned JIT support */ 243#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) 244#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) 245 246extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); 247extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); 248 249/* Standard format for printing registers and other word-size data. */ 250#ifdef __tilegx__ 251# define REGFMT "0x%016lx" 252#else 253# define REGFMT "0x%08lx" 254#endif 255 256/* 257 * Do some slow action (e.g. read a slow SPR). 258 * Note that this must also have compiler-barrier semantics since 259 * it may be used in a busy loop reading memory. 260 */ 261static inline void cpu_relax(void) 262{ 263 __insn_mfspr(SPR_PASS); 264 barrier(); 265} 266 267#define cpu_relax_lowlatency() cpu_relax() 268 269/* Info on this processor (see fs/proc/cpuinfo.c) */ 270struct seq_operations; 271extern const struct seq_operations cpuinfo_op; 272 273/* Provide information about the chip model. */ 274extern char chip_model[64]; 275 276/* Data on which physical memory controller corresponds to which NUMA node. */ 277extern int node_controller[]; 278 279/* Does the heap allocator return hash-for-home pages by default? */ 280extern int hash_default; 281 282/* Should kernel stack pages be hash-for-home? */ 283extern int kstack_hash; 284 285/* Does MAP_ANONYMOUS return hash-for-home pages by default? */ 286#define uheap_hash hash_default 287 288 289/* Are we using huge pages in the TLB for kernel data? */ 290extern int kdata_huge; 291 292/* Support standard Linux prefetching. */ 293#define ARCH_HAS_PREFETCH 294#define prefetch(x) __builtin_prefetch(x) 295#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE() 296 297/* Bring a value into the L1D, faulting the TLB if necessary. */ 298#ifdef __tilegx__ 299#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x)) 300#else 301#define prefetch_L1(x) __insn_prefetch_L1((void *)(x)) 302#endif 303 304#else /* __ASSEMBLY__ */ 305 306/* Do some slow action (e.g. read a slow SPR). */ 307#define CPU_RELAX mfspr zero, SPR_PASS 308 309#endif /* !__ASSEMBLY__ */ 310 311/* Assembly code assumes that the PL is in the low bits. */ 312#if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0 313# error Fix assembly assumptions about PL 314#endif 315 316/* We sometimes use these macros for EX_CONTEXT_0_1 as well. */ 317#if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \ 318 SPR_EX_CONTEXT_1_1__PL_RMASK != SPR_EX_CONTEXT_0_1__PL_RMASK || \ 319 SPR_EX_CONTEXT_1_1__ICS_SHIFT != SPR_EX_CONTEXT_0_1__ICS_SHIFT || \ 320 SPR_EX_CONTEXT_1_1__ICS_RMASK != SPR_EX_CONTEXT_0_1__ICS_RMASK 321# error Fix assumptions that EX1 macros work for both PL0 and PL1 322#endif 323 324/* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */ 325#define EX1_PL(ex1) \ 326 (((ex1) >> SPR_EX_CONTEXT_1_1__PL_SHIFT) & SPR_EX_CONTEXT_1_1__PL_RMASK) 327#define EX1_ICS(ex1) \ 328 (((ex1) >> SPR_EX_CONTEXT_1_1__ICS_SHIFT) & SPR_EX_CONTEXT_1_1__ICS_RMASK) 329#define PL_ICS_EX1(pl, ics) \ 330 (((pl) << SPR_EX_CONTEXT_1_1__PL_SHIFT) | \ 331 ((ics) << SPR_EX_CONTEXT_1_1__ICS_SHIFT)) 332 333/* 334 * Provide symbolic constants for PLs. 335 */ 336#define USER_PL 0 337#if CONFIG_KERNEL_PL == 2 338#define GUEST_PL 1 339#endif 340#define KERNEL_PL CONFIG_KERNEL_PL 341 342/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */ 343#ifdef __tilegx__ 344#define CPU_SHIFT 48 345#if CHIP_VA_WIDTH() > CPU_SHIFT 346# error Too many VA bits! 347#endif 348#define MAX_CPU_ID ((1 << (64 - CPU_SHIFT)) - 1) 349#define raw_smp_processor_id() \ 350 ((int)(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) >> CPU_SHIFT)) 351#define get_current_ksp0() \ 352 ((unsigned long)(((long)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) << \ 353 (64 - CPU_SHIFT)) >> (64 - CPU_SHIFT))) 354#define next_current_ksp0(task) ({ \ 355 unsigned long __ksp0 = task_ksp0(task) & ((1UL << CPU_SHIFT) - 1); \ 356 unsigned long __cpu = (long)raw_smp_processor_id() << CPU_SHIFT; \ 357 __ksp0 | __cpu; \ 358}) 359#else 360#define LOG2_NR_CPU_IDS 6 361#define MAX_CPU_ID ((1 << LOG2_NR_CPU_IDS) - 1) 362#define raw_smp_processor_id() \ 363 ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & MAX_CPU_ID) 364#define get_current_ksp0() \ 365 (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~MAX_CPU_ID) 366#define next_current_ksp0(task) ({ \ 367 unsigned long __ksp0 = task_ksp0(task); \ 368 int __cpu = raw_smp_processor_id(); \ 369 BUG_ON(__ksp0 & MAX_CPU_ID); \ 370 __ksp0 | __cpu; \ 371}) 372#endif 373#if CONFIG_NR_CPUS > (MAX_CPU_ID + 1) 374# error Too many cpus! 375#endif 376 377#endif /* _ASM_TILE_PROCESSOR_H */