Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1#
2# PHY Layer Configuration
3#
4
5menuconfig PHYLIB
6 tristate "PHY Device support and infrastructure"
7 depends on NETDEVICES
8 help
9 Ethernet controllers are usually attached to PHY
10 devices. This option provides infrastructure for
11 managing PHY devices.
12
13if PHYLIB
14
15comment "MII PHY device drivers"
16
17config AQUANTIA_PHY
18 tristate "Drivers for the Aquantia PHYs"
19 ---help---
20 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
21
22config AT803X_PHY
23 tristate "Drivers for Atheros AT803X PHYs"
24 ---help---
25 Currently supports the AT8030 and AT8035 model
26
27config AMD_PHY
28 tristate "Drivers for the AMD PHYs"
29 ---help---
30 Currently supports the am79c874
31
32config MARVELL_PHY
33 tristate "Drivers for Marvell PHYs"
34 ---help---
35 Currently has a driver for the 88E1011S
36
37config DAVICOM_PHY
38 tristate "Drivers for Davicom PHYs"
39 ---help---
40 Currently supports dm9161e and dm9131
41
42config QSEMI_PHY
43 tristate "Drivers for Quality Semiconductor PHYs"
44 ---help---
45 Currently supports the qs6612
46
47config LXT_PHY
48 tristate "Drivers for the Intel LXT PHYs"
49 ---help---
50 Currently supports the lxt970, lxt971
51
52config CICADA_PHY
53 tristate "Drivers for the Cicada PHYs"
54 ---help---
55 Currently supports the cis8204
56
57config VITESSE_PHY
58 tristate "Drivers for the Vitesse PHYs"
59 ---help---
60 Currently supports the vsc8244
61
62config TERANETICS_PHY
63 tristate "Drivers for the Teranetics PHYs"
64 ---help---
65 Currently supports the Teranetics TN2020
66
67config SMSC_PHY
68 tristate "Drivers for SMSC PHYs"
69 ---help---
70 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
71
72config BCM_NET_PHYLIB
73 tristate
74
75config BROADCOM_PHY
76 tristate "Drivers for Broadcom PHYs"
77 select BCM_NET_PHYLIB
78 ---help---
79 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
80 BCM5481 and BCM5482 PHYs.
81
82config BCM_CYGNUS_PHY
83 tristate "Drivers for Broadcom Cygnus SoC internal PHY"
84 depends on ARCH_BCM_CYGNUS || COMPILE_TEST
85 depends on MDIO_BCM_IPROC
86 select BCM_NET_PHYLIB
87 ---help---
88 This PHY driver is for the 1G internal PHYs of the Broadcom
89 Cygnus Family SoC.
90
91 Currently supports internal PHY's used in the BCM11300,
92 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
93 BCM58303 & BCM58305 Broadcom Cygnus SoCs.
94
95config BCM63XX_PHY
96 tristate "Drivers for Broadcom 63xx SOCs internal PHY"
97 depends on BCM63XX
98 select BCM_NET_PHYLIB
99 ---help---
100 Currently supports the 6348 and 6358 PHYs.
101
102config BCM7XXX_PHY
103 tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
104 select BCM_NET_PHYLIB
105 ---help---
106 Currently supports the BCM7366, BCM7439, BCM7445, and
107 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
108
109config BCM87XX_PHY
110 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
111 help
112 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
113
114config ICPLUS_PHY
115 tristate "Drivers for ICPlus PHYs"
116 ---help---
117 Currently supports the IP175C and IP1001 PHYs.
118
119config REALTEK_PHY
120 tristate "Drivers for Realtek PHYs"
121 ---help---
122 Supports the Realtek 821x PHY.
123
124config NATIONAL_PHY
125 tristate "Drivers for National Semiconductor PHYs"
126 ---help---
127 Currently supports the DP83865 PHY.
128
129config STE10XP
130 tristate "Driver for STMicroelectronics STe10Xp PHYs"
131 ---help---
132 This is the driver for the STe100p and STe101p PHYs.
133
134config LSI_ET1011C_PHY
135 tristate "Driver for LSI ET1011C PHY"
136 ---help---
137 Supports the LSI ET1011C PHY.
138
139config MICREL_PHY
140 tristate "Driver for Micrel PHYs"
141 ---help---
142 Supports the KSZ9021, VSC8201, KS8001 PHYs.
143
144config DP83848_PHY
145 tristate "Driver for Texas Instruments DP83848 PHY"
146 ---help---
147 Supports the DP83848 PHY.
148
149config DP83867_PHY
150 tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
151 ---help---
152 Currently supports the DP83867 PHY.
153
154config MICROCHIP_PHY
155 tristate "Drivers for Microchip PHYs"
156 help
157 Supports the LAN88XX PHYs.
158
159config FIXED_PHY
160 tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
161 depends on PHYLIB
162 ---help---
163 Adds the platform "fixed" MDIO Bus to cover the boards that use
164 PHYs that are not connected to the real MDIO bus.
165
166 Currently tested with mpc866ads and mpc8349e-mitx.
167
168config MDIO_BITBANG
169 tristate "Support for bitbanged MDIO buses"
170 help
171 This module implements the MDIO bus protocol in software,
172 for use by low level drivers that export the ability to
173 drive the relevant pins.
174
175 If in doubt, say N.
176
177config MDIO_GPIO
178 tristate "Support for GPIO lib-based bitbanged MDIO buses"
179 depends on MDIO_BITBANG && GPIOLIB
180 ---help---
181 Supports GPIO lib-based MDIO busses.
182
183 To compile this driver as a module, choose M here: the module
184 will be called mdio-gpio.
185
186config MDIO_OCTEON
187 tristate "Support for MDIO buses on Octeon and ThunderX SOCs"
188 depends on 64BIT
189 help
190
191 This module provides a driver for the Octeon and ThunderX MDIO
192 busses. It is required by the Octeon and ThunderX ethernet device
193 drivers.
194
195config MDIO_SUN4I
196 tristate "Allwinner sun4i MDIO interface support"
197 depends on ARCH_SUNXI
198 help
199 This driver supports the MDIO interface found in the network
200 interface units of the Allwinner SoC that have an EMAC (A10,
201 A12, A10s, etc.)
202
203config MDIO_MOXART
204 tristate "MOXA ART MDIO interface support"
205 depends on ARCH_MOXART
206 help
207 This driver supports the MDIO interface found in the network
208 interface units of the MOXA ART SoC
209
210config MDIO_BUS_MUX
211 tristate
212 depends on OF_MDIO
213 help
214 This module provides a driver framework for MDIO bus
215 multiplexers which connect one of several child MDIO busses
216 to a parent bus. Switching between child busses is done by
217 device specific drivers.
218
219config MDIO_BUS_MUX_GPIO
220 tristate "Support for GPIO controlled MDIO bus multiplexers"
221 depends on OF_GPIO && OF_MDIO
222 select MDIO_BUS_MUX
223 help
224 This module provides a driver for MDIO bus multiplexers that
225 are controlled via GPIO lines. The multiplexer connects one of
226 several child MDIO busses to a parent bus. Child bus
227 selection is under the control of GPIO lines.
228
229config MDIO_BUS_MUX_MMIOREG
230 tristate "Support for MMIO device-controlled MDIO bus multiplexers"
231 depends on OF_MDIO && HAS_IOMEM
232 select MDIO_BUS_MUX
233 help
234 This module provides a driver for MDIO bus multiplexers that
235 are controlled via a simple memory-mapped device, like an FPGA.
236 The multiplexer connects one of several child MDIO busses to a
237 parent bus. Child bus selection is under the control of one of
238 the FPGA's registers.
239
240 Currently, only 8-bit registers are supported.
241
242config MDIO_BCM_UNIMAC
243 tristate "Broadcom UniMAC MDIO bus controller"
244 depends on HAS_IOMEM
245 help
246 This module provides a driver for the Broadcom UniMAC MDIO busses.
247 This hardware can be found in the Broadcom GENET Ethernet MAC
248 controllers as well as some Broadcom Ethernet switches such as the
249 Starfighter 2 switches.
250
251config MDIO_BCM_IPROC
252 tristate "Broadcom iProc MDIO bus controller"
253 depends on ARCH_BCM_IPROC || COMPILE_TEST
254 depends on HAS_IOMEM && OF_MDIO
255 help
256 This module provides a driver for the MDIO busses found in the
257 Broadcom iProc SoC's.
258
259endif # PHYLIB
260
261config MICREL_KS8995MA
262 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
263 depends on SPI