kernel / drivers / soc / qcom / smd.c

/*
 * Copyright (c) 2015, Sony Mobile Communications AB.
 * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
#include <linux/soc/qcom/smem.h>
#include <linux/wait.h>

/*
 * The Qualcomm Shared Memory communication solution provides point-to-point
 * channels for clients to send and receive streaming or packet based data.
 *
 * Each channel consists of a control item (channel info) and a ring buffer
 * pair. The channel info carry information related to channel state, flow
 * control and the offsets within the ring buffer.
 *
 * All allocated channels are listed in an allocation table, identifying the
 * pair of items by name, type and remote processor.
 *
 * Upon creating a new channel the remote processor allocates channel info and
 * ring buffer items from the smem heap and populate the allocation table. An
 * interrupt is sent to the other end of the channel and a scan for new
 * channels should be done. A channel never goes away, it will only change
 * state.
 *
 * The remote processor signals it intent for bring up the communication
 * channel by setting the state of its end of the channel to "opening" and
 * sends out an interrupt. We detect this change and register a smd device to
 * consume the channel. Upon finding a consumer we finish the handshake and the
 * channel is up.
 *
 * Upon closing a channel, the remote processor will update the state of its
 * end of the channel and signal us, we will then unregister any attached
 * device and close our end of the channel.
 *
 * Devices attached to a channel can use the qcom_smd_send function to push
 * data to the channel, this is done by copying the data into the tx ring
 * buffer, updating the pointers in the channel info and signaling the remote
 * processor.
 *
 * The remote processor does the equivalent when it transfer data and upon
 * receiving the interrupt we check the channel info for new data and delivers
 * this to the attached device. If the device is not ready to receive the data
 * we leave it in the ring buffer for now.
 */

struct smd_channel_info;
struct smd_channel_info_word;

#define SMD_ALLOC_TBL_COUNT	2
#define SMD_ALLOC_TBL_SIZE	64

/*
 * This lists the various smem heap items relevant for the allocation table and
 * smd channel entries.
 */
static const struct {
	unsigned alloc_tbl_id;
	unsigned info_base_id;
	unsigned fifo_base_id;
} smem_items[SMD_ALLOC_TBL_COUNT] = {
	{
		.alloc_tbl_id = 13,
		.info_base_id = 14,
		.fifo_base_id = 338
	},
	{
		.alloc_tbl_id = 14,
		.info_base_id = 266,
		.fifo_base_id = 202,
	},
};

/**
 * struct qcom_smd_edge - representing a remote processor
 * @smd:		handle to qcom_smd
 * @of_node:		of_node handle for information related to this edge
 * @edge_id:		identifier of this edge
 * @remote_pid:		identifier of remote processor
 * @irq:		interrupt for signals on this edge
 * @ipc_regmap:		regmap handle holding the outgoing ipc register
 * @ipc_offset:		offset within @ipc_regmap of the register for ipc
 * @ipc_bit:		bit in the register at @ipc_offset of @ipc_regmap
 * @channels:		list of all channels detected on this edge
 * @channels_lock:	guard for modifications of @channels
 * @allocated:		array of bitmaps representing already allocated channels
 * @need_rescan:	flag that the @work needs to scan smem for new channels
 * @smem_available:	last available amount of smem triggering a channel scan
 * @work:		work item for edge house keeping
 */
struct qcom_smd_edge {
	struct qcom_smd *smd;
	struct device_node *of_node;
	unsigned edge_id;
	unsigned remote_pid;

	int irq;

	struct regmap *ipc_regmap;
	int ipc_offset;
	int ipc_bit;

	struct list_head channels;
	spinlock_t channels_lock;

	DECLARE_BITMAP(allocated[SMD_ALLOC_TBL_COUNT], SMD_ALLOC_TBL_SIZE);

	bool need_rescan;
	unsigned smem_available;

	struct work_struct work;
};

/*
 * SMD channel states.
 */
enum smd_channel_state {
	SMD_CHANNEL_CLOSED,
	SMD_CHANNEL_OPENING,
	SMD_CHANNEL_OPENED,
	SMD_CHANNEL_FLUSHING,
	SMD_CHANNEL_CLOSING,
	SMD_CHANNEL_RESET,
	SMD_CHANNEL_RESET_OPENING
};

/**
 * struct qcom_smd_channel - smd channel struct
 * @edge:		qcom_smd_edge this channel is living on
 * @qsdev:		reference to a associated smd client device
 * @name:		name of the channel
 * @state:		local state of the channel
 * @remote_state:	remote state of the channel
 * @tx_info:		byte aligned outgoing channel info
 * @rx_info:		byte aligned incoming channel info
 * @tx_info_word:	word aligned outgoing channel info
 * @rx_info_word:	word aligned incoming channel info
 * @tx_lock:		lock to make writes to the channel mutually exclusive
 * @fblockread_event:	wakeup event tied to tx fBLOCKREADINTR
 * @tx_fifo:		pointer to the outgoing ring buffer
 * @rx_fifo:		pointer to the incoming ring buffer
 * @fifo_size:		size of each ring buffer
 * @bounce_buffer:	bounce buffer for reading wrapped packets
 * @cb:			callback function registered for this channel
 * @recv_lock:		guard for rx info modifications and cb pointer
 * @pkt_size:		size of the currently handled packet
 * @list:		lite entry for @channels in qcom_smd_edge
 */
struct qcom_smd_channel {
	struct qcom_smd_edge *edge;

	struct qcom_smd_device *qsdev;

	char *name;
	enum smd_channel_state state;
	enum smd_channel_state remote_state;

	struct smd_channel_info *tx_info;
	struct smd_channel_info *rx_info;

	struct smd_channel_info_word *tx_info_word;
	struct smd_channel_info_word *rx_info_word;

	struct mutex tx_lock;
	wait_queue_head_t fblockread_event;

	void *tx_fifo;
	void *rx_fifo;
	int fifo_size;

	void *bounce_buffer;
	int (*cb)(struct qcom_smd_device *, const void *, size_t);

	spinlock_t recv_lock;

	int pkt_size;

	struct list_head list;
};

/**
 * struct qcom_smd - smd struct
 * @dev:	device struct
 * @num_edges:	number of entries in @edges
 * @edges:	array of edges to be handled
 */
struct qcom_smd {
	struct device *dev;

	unsigned num_edges;
	struct qcom_smd_edge edges[0];
};

/*
 * Format of the smd_info smem items, for byte aligned channels.
 */
struct smd_channel_info {
	u32 state;
	u8  fDSR;
	u8  fCTS;
	u8  fCD;
	u8  fRI;
	u8  fHEAD;
	u8  fTAIL;
	u8  fSTATE;
	u8  fBLOCKREADINTR;
	u32 tail;
	u32 head;
};

/*
 * Format of the smd_info smem items, for word aligned channels.
 */
struct smd_channel_info_word {
	u32 state;
	u32 fDSR;
	u32 fCTS;
	u32 fCD;
	u32 fRI;
	u32 fHEAD;
	u32 fTAIL;
	u32 fSTATE;
	u32 fBLOCKREADINTR;
	u32 tail;
	u32 head;
};

#define GET_RX_CHANNEL_INFO(channel, param) \
	(channel->rx_info_word ? \
		channel->rx_info_word->param : \
		channel->rx_info->param)

#define SET_RX_CHANNEL_INFO(channel, param, value) \
	(channel->rx_info_word ? \
		(channel->rx_info_word->param = value) : \
		(channel->rx_info->param = value))

#define GET_TX_CHANNEL_INFO(channel, param) \
	(channel->tx_info_word ? \
		channel->tx_info_word->param : \
		channel->tx_info->param)

#define SET_TX_CHANNEL_INFO(channel, param, value) \
	(channel->tx_info_word ? \
		(channel->tx_info_word->param = value) : \
		(channel->tx_info->param = value))

/**
 * struct qcom_smd_alloc_entry - channel allocation entry
 * @name:	channel name
 * @cid:	channel index
 * @flags:	channel flags and edge id
 * @ref_count:	reference count of the channel
 */
struct qcom_smd_alloc_entry {
	u8 name[20];
	u32 cid;
	u32 flags;
	u32 ref_count;
} __packed;

#define SMD_CHANNEL_FLAGS_EDGE_MASK	0xff
#define SMD_CHANNEL_FLAGS_STREAM	BIT(8)
#define SMD_CHANNEL_FLAGS_PACKET	BIT(9)

/*
 * Each smd packet contains a 20 byte header, with the first 4 being the length
 * of the packet.
 */
#define SMD_PACKET_HEADER_LEN	20

/*
 * Signal the remote processor associated with 'channel'.
 */
static void qcom_smd_signal_channel(struct qcom_smd_channel *channel)
{
	struct qcom_smd_edge *edge = channel->edge;

	regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit));
}

/*
 * Initialize the tx channel info
 */
static void qcom_smd_channel_reset(struct qcom_smd_channel *channel)
{
	SET_TX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
	SET_TX_CHANNEL_INFO(channel, fDSR, 0);
	SET_TX_CHANNEL_INFO(channel, fCTS, 0);
	SET_TX_CHANNEL_INFO(channel, fCD, 0);
	SET_TX_CHANNEL_INFO(channel, fRI, 0);
	SET_TX_CHANNEL_INFO(channel, fHEAD, 0);
	SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
	SET_TX_CHANNEL_INFO(channel, fSTATE, 1);
	SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
	SET_TX_CHANNEL_INFO(channel, head, 0);
	SET_TX_CHANNEL_INFO(channel, tail, 0);

	qcom_smd_signal_channel(channel);

	channel->state = SMD_CHANNEL_CLOSED;
	channel->pkt_size = 0;
}

/*
 * Calculate the amount of data available in the rx fifo
 */
static size_t qcom_smd_channel_get_rx_avail(struct qcom_smd_channel *channel)
{
	unsigned head;
	unsigned tail;

	head = GET_RX_CHANNEL_INFO(channel, head);
	tail = GET_RX_CHANNEL_INFO(channel, tail);

	return (head - tail) & (channel->fifo_size - 1);
}

/*
 * Set tx channel state and inform the remote processor
 */
static void qcom_smd_channel_set_state(struct qcom_smd_channel *channel,
				       int state)
{
	struct qcom_smd_edge *edge = channel->edge;
	bool is_open = state == SMD_CHANNEL_OPENED;

	if (channel->state == state)
		return;

	dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state);

	SET_TX_CHANNEL_INFO(channel, fDSR, is_open);
	SET_TX_CHANNEL_INFO(channel, fCTS, is_open);
	SET_TX_CHANNEL_INFO(channel, fCD, is_open);

	SET_TX_CHANNEL_INFO(channel, state, state);
	SET_TX_CHANNEL_INFO(channel, fSTATE, 1);

	channel->state = state;
	qcom_smd_signal_channel(channel);
}

/*
 * Copy count bytes of data using 32bit accesses, if that's required.
 */
static void smd_copy_to_fifo(void __iomem *_dst,
			     const void *_src,
			     size_t count,
			     bool word_aligned)
{
	u32 *dst = (u32 *)_dst;
	u32 *src = (u32 *)_src;

	if (word_aligned) {
		count /= sizeof(u32);
		while (count--)
			writel_relaxed(*src++, dst++);
	} else {
		memcpy_toio(_dst, _src, count);
	}
}

/*
 * Copy count bytes of data using 32bit accesses, if that is required.
 */
static void smd_copy_from_fifo(void *_dst,
			       const void __iomem *_src,
			       size_t count,
			       bool word_aligned)
{
	u32 *dst = (u32 *)_dst;
	u32 *src = (u32 *)_src;

	if (word_aligned) {
		count /= sizeof(u32);
		while (count--)
			*dst++ = readl_relaxed(src++);
	} else {
		memcpy_fromio(_dst, _src, count);
	}
}

/*
 * Read count bytes of data from the rx fifo into buf, but don't advance the
 * tail.
 */
static size_t qcom_smd_channel_peek(struct qcom_smd_channel *channel,
				    void *buf, size_t count)
{
	bool word_aligned;
	unsigned tail;
	size_t len;

	word_aligned = channel->rx_info_word != NULL;
	tail = GET_RX_CHANNEL_INFO(channel, tail);

	len = min_t(size_t, count, channel->fifo_size - tail);
	if (len) {
		smd_copy_from_fifo(buf,
				   channel->rx_fifo + tail,
				   len,
				   word_aligned);
	}

	if (len != count) {
		smd_copy_from_fifo(buf + len,
				   channel->rx_fifo,
				   count - len,
				   word_aligned);
	}

	return count;
}

/*
 * Advance the rx tail by count bytes.
 */
static void qcom_smd_channel_advance(struct qcom_smd_channel *channel,
				     size_t count)
{
	unsigned tail;

	tail = GET_RX_CHANNEL_INFO(channel, tail);
	tail += count;
	tail &= (channel->fifo_size - 1);
	SET_RX_CHANNEL_INFO(channel, tail, tail);
}

/*
 * Read out a single packet from the rx fifo and deliver it to the device
 */
static int qcom_smd_channel_recv_single(struct qcom_smd_channel *channel)
{
	struct qcom_smd_device *qsdev = channel->qsdev;
	unsigned tail;
	size_t len;
	void *ptr;
	int ret;

	if (!channel->cb)
		return 0;

	tail = GET_RX_CHANNEL_INFO(channel, tail);

	/* Use bounce buffer if the data wraps */
	if (tail + channel->pkt_size >= channel->fifo_size) {
		ptr = channel->bounce_buffer;
		len = qcom_smd_channel_peek(channel, ptr, channel->pkt_size);
	} else {
		ptr = channel->rx_fifo + tail;
		len = channel->pkt_size;
	}

	ret = channel->cb(qsdev, ptr, len);
	if (ret < 0)
		return ret;

	/* Only forward the tail if the client consumed the data */
	qcom_smd_channel_advance(channel, len);

	channel->pkt_size = 0;

	return 0;
}

/*
 * Per channel interrupt handling
 */
static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel)
{
	bool need_state_scan = false;
	int remote_state;
	u32 pktlen;
	int avail;
	int ret;

	/* Handle state changes */
	remote_state = GET_RX_CHANNEL_INFO(channel, state);
	if (remote_state != channel->remote_state) {
		channel->remote_state = remote_state;
		need_state_scan = true;
	}
	/* Indicate that we have seen any state change */
	SET_RX_CHANNEL_INFO(channel, fSTATE, 0);

	/* Signal waiting qcom_smd_send() about the interrupt */
	if (!GET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR))
		wake_up_interruptible(&channel->fblockread_event);

	/* Don't consume any data until we've opened the channel */
	if (channel->state != SMD_CHANNEL_OPENED)
		goto out;

	/* Indicate that we've seen the new data */
	SET_RX_CHANNEL_INFO(channel, fHEAD, 0);

	/* Consume data */
	for (;;) {
		avail = qcom_smd_channel_get_rx_avail(channel);

		if (!channel->pkt_size && avail >= SMD_PACKET_HEADER_LEN) {
			qcom_smd_channel_peek(channel, &pktlen, sizeof(pktlen));
			qcom_smd_channel_advance(channel, SMD_PACKET_HEADER_LEN);
			channel->pkt_size = pktlen;
		} else if (channel->pkt_size && avail >= channel->pkt_size) {
			ret = qcom_smd_channel_recv_single(channel);
			if (ret)
				break;
		} else {
			break;
		}
	}

	/* Indicate that we have seen and updated tail */
	SET_RX_CHANNEL_INFO(channel, fTAIL, 1);

	/* Signal the remote that we've consumed the data (if requested) */
	if (!GET_RX_CHANNEL_INFO(channel, fBLOCKREADINTR)) {
		/* Ensure ordering of channel info updates */
		wmb();

		qcom_smd_signal_channel(channel);
	}

out:
	return need_state_scan;
}

/*
 * The edge interrupts are triggered by the remote processor on state changes,
 * channel info updates or when new channels are created.
 */
static irqreturn_t qcom_smd_edge_intr(int irq, void *data)
{
	struct qcom_smd_edge *edge = data;
	struct qcom_smd_channel *channel;
	unsigned available;
	bool kick_worker = false;

	/*
	 * Handle state changes or data on each of the channels on this edge
	 */
	spin_lock(&edge->channels_lock);
	list_for_each_entry(channel, &edge->channels, list) {
		spin_lock(&channel->recv_lock);
		kick_worker |= qcom_smd_channel_intr(channel);
		spin_unlock(&channel->recv_lock);
	}
	spin_unlock(&edge->channels_lock);

	/*
	 * Creating a new channel requires allocating an smem entry, so we only
	 * have to scan if the amount of available space in smem have changed
	 * since last scan.
	 */
	available = qcom_smem_get_free_space(edge->remote_pid);
	if (available != edge->smem_available) {
		edge->smem_available = available;
		edge->need_rescan = true;
		kick_worker = true;
	}

	if (kick_worker)
		schedule_work(&edge->work);

	return IRQ_HANDLED;
}

/*
 * Delivers any outstanding packets in the rx fifo, can be used after probe of
 * the clients to deliver any packets that wasn't delivered before the client
 * was setup.
 */
static void qcom_smd_channel_resume(struct qcom_smd_channel *channel)
{
	unsigned long flags;

	spin_lock_irqsave(&channel->recv_lock, flags);
	qcom_smd_channel_intr(channel);
	spin_unlock_irqrestore(&channel->recv_lock, flags);
}

/*
 * Calculate how much space is available in the tx fifo.
 */
static size_t qcom_smd_get_tx_avail(struct qcom_smd_channel *channel)
{
	unsigned head;
	unsigned tail;
	unsigned mask = channel->fifo_size - 1;

	head = GET_TX_CHANNEL_INFO(channel, head);
	tail = GET_TX_CHANNEL_INFO(channel, tail);

	return mask - ((head - tail) & mask);
}

/*
 * Write count bytes of data into channel, possibly wrapping in the ring buffer
 */
static int qcom_smd_write_fifo(struct qcom_smd_channel *channel,
			       const void *data,
			       size_t count)
{
	bool word_aligned;
	unsigned head;
	size_t len;

	word_aligned = channel->tx_info_word != NULL;
	head = GET_TX_CHANNEL_INFO(channel, head);

	len = min_t(size_t, count, channel->fifo_size - head);
	if (len) {
		smd_copy_to_fifo(channel->tx_fifo + head,
				 data,
				 len,
				 word_aligned);
	}

	if (len != count) {
		smd_copy_to_fifo(channel->tx_fifo,
				 data + len,
				 count - len,
				 word_aligned);
	}

	head += count;
	head &= (channel->fifo_size - 1);
	SET_TX_CHANNEL_INFO(channel, head, head);

	return count;
}

/**
 * qcom_smd_send - write data to smd channel
 * @channel:	channel handle
 * @data:	buffer of data to write
 * @len:	number of bytes to write
 *
 * This is a blocking write of len bytes into the channel's tx ring buffer and
 * signal the remote end. It will sleep until there is enough space available
 * in the tx buffer, utilizing the fBLOCKREADINTR signaling mechanism to avoid
 * polling.
 */
int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len)
{
	u32 hdr[5] = {len,};
	int tlen = sizeof(hdr) + len;
	int ret;

	/* Word aligned channels only accept word size aligned data */
	if (channel->rx_info_word != NULL && len % 4)
		return -EINVAL;

	ret = mutex_lock_interruptible(&channel->tx_lock);
	if (ret)
		return ret;

	while (qcom_smd_get_tx_avail(channel) < tlen) {
		if (channel->state != SMD_CHANNEL_OPENED) {
			ret = -EPIPE;
			goto out;
		}

		SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0);

		ret = wait_event_interruptible(channel->fblockread_event,
				       qcom_smd_get_tx_avail(channel) >= tlen ||
				       channel->state != SMD_CHANNEL_OPENED);
		if (ret)
			goto out;

		SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
	}

	SET_TX_CHANNEL_INFO(channel, fTAIL, 0);

	qcom_smd_write_fifo(channel, hdr, sizeof(hdr));
	qcom_smd_write_fifo(channel, data, len);

	SET_TX_CHANNEL_INFO(channel, fHEAD, 1);

	/* Ensure ordering of channel info updates */
	wmb();

	qcom_smd_signal_channel(channel);

out:
	mutex_unlock(&channel->tx_lock);

	return ret;
}
EXPORT_SYMBOL(qcom_smd_send);

static struct qcom_smd_device *to_smd_device(struct device *dev)
{
	return container_of(dev, struct qcom_smd_device, dev);
}

static struct qcom_smd_driver *to_smd_driver(struct device *dev)
{
	struct qcom_smd_device *qsdev = to_smd_device(dev);

	return container_of(qsdev->dev.driver, struct qcom_smd_driver, driver);
}

static int qcom_smd_dev_match(struct device *dev, struct device_driver *drv)
{
	return of_driver_match_device(dev, drv);
}

/*
 * Probe the smd client.
 *
 * The remote side have indicated that it want the channel to be opened, so
 * complete the state handshake and probe our client driver.
 */
static int qcom_smd_dev_probe(struct device *dev)
{
	struct qcom_smd_device *qsdev = to_smd_device(dev);
	struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
	struct qcom_smd_channel *channel = qsdev->channel;
	size_t bb_size;
	int ret;

	/*
	 * Packets are maximum 4k, but reduce if the fifo is smaller
	 */
	bb_size = min(channel->fifo_size, SZ_4K);
	channel->bounce_buffer = kmalloc(bb_size, GFP_KERNEL);
	if (!channel->bounce_buffer)
		return -ENOMEM;

	channel->cb = qsdrv->callback;

	qcom_smd_channel_set_state(channel, SMD_CHANNEL_OPENING);

	qcom_smd_channel_set_state(channel, SMD_CHANNEL_OPENED);

	ret = qsdrv->probe(qsdev);
	if (ret)
		goto err;

	qcom_smd_channel_resume(channel);

	return 0;

err:
	dev_err(&qsdev->dev, "probe failed\n");

	channel->cb = NULL;
	kfree(channel->bounce_buffer);
	channel->bounce_buffer = NULL;

	qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSED);
	return ret;
}

/*
 * Remove the smd client.
 *
 * The channel is going away, for some reason, so remove the smd client and
 * reset the channel state.
 */
static int qcom_smd_dev_remove(struct device *dev)
{
	struct qcom_smd_device *qsdev = to_smd_device(dev);
	struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
	struct qcom_smd_channel *channel = qsdev->channel;
	unsigned long flags;

	qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSING);

	/*
	 * Make sure we don't race with the code receiving data.
	 */
	spin_lock_irqsave(&channel->recv_lock, flags);
	channel->cb = NULL;
	spin_unlock_irqrestore(&channel->recv_lock, flags);

	/* Wake up any sleepers in qcom_smd_send() */
	wake_up_interruptible(&channel->fblockread_event);

	/*
	 * We expect that the client might block in remove() waiting for any
	 * outstanding calls to qcom_smd_send() to wake up and finish.
	 */
	if (qsdrv->remove)
		qsdrv->remove(qsdev);

	/*
	 * The client is now gone, cleanup and reset the channel state.
	 */
	channel->qsdev = NULL;
	kfree(channel->bounce_buffer);
	channel->bounce_buffer = NULL;

	qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSED);

	qcom_smd_channel_reset(channel);

	return 0;
}

static struct bus_type qcom_smd_bus = {
	.name = "qcom_smd",
	.match = qcom_smd_dev_match,
	.probe = qcom_smd_dev_probe,
	.remove = qcom_smd_dev_remove,
};

/*
 * Release function for the qcom_smd_device object.
 */
static void qcom_smd_release_device(struct device *dev)
{
	struct qcom_smd_device *qsdev = to_smd_device(dev);

	kfree(qsdev);
}

/*
 * Finds the device_node for the smd child interested in this channel.
 */
static struct device_node *qcom_smd_match_channel(struct device_node *edge_node,
						  const char *channel)
{
	struct device_node *child;
	const char *name;
	const char *key;
	int ret;

	for_each_available_child_of_node(edge_node, child) {
		key = "qcom,smd-channels";
		ret = of_property_read_string(child, key, &name);
		if (ret) {
			of_node_put(child);
			continue;
		}

		if (strcmp(name, channel) == 0)
			return child;
	}

	return NULL;
}

/*
 * Create a smd client device for channel that is being opened.
 */
static int qcom_smd_create_device(struct qcom_smd_channel *channel)
{
	struct qcom_smd_device *qsdev;
	struct qcom_smd_edge *edge = channel->edge;
	struct device_node *node;
	struct qcom_smd *smd = edge->smd;
	int ret;

	if (channel->qsdev)
		return -EEXIST;

	node = qcom_smd_match_channel(edge->of_node, channel->name);
	if (!node) {
		dev_dbg(smd->dev, "no match for '%s'\n", channel->name);
		return -ENXIO;
	}

	dev_dbg(smd->dev, "registering '%s'\n", channel->name);

	qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL);
	if (!qsdev)
		return -ENOMEM;

	dev_set_name(&qsdev->dev, "%s.%s", edge->of_node->name, node->name);
	qsdev->dev.parent = smd->dev;
	qsdev->dev.bus = &qcom_smd_bus;
	qsdev->dev.release = qcom_smd_release_device;
	qsdev->dev.of_node = node;

	qsdev->channel = channel;

	channel->qsdev = qsdev;

	ret = device_register(&qsdev->dev);
	if (ret) {
		dev_err(smd->dev, "device_register failed: %d\n", ret);
		put_device(&qsdev->dev);
	}

	return ret;
}

/*
 * Destroy a smd client device for a channel that's going away.
 */
static void qcom_smd_destroy_device(struct qcom_smd_channel *channel)
{
	struct device *dev;

	BUG_ON(!channel->qsdev);

	dev = &channel->qsdev->dev;

	device_unregister(dev);
	of_node_put(dev->of_node);
	put_device(dev);
}

/**
 * qcom_smd_driver_register - register a smd driver
 * @qsdrv:	qcom_smd_driver struct
 */
int qcom_smd_driver_register(struct qcom_smd_driver *qsdrv)
{
	qsdrv->driver.bus = &qcom_smd_bus;
	return driver_register(&qsdrv->driver);
}
EXPORT_SYMBOL(qcom_smd_driver_register);

/**
 * qcom_smd_driver_unregister - unregister a smd driver
 * @qsdrv:	qcom_smd_driver struct
 */
void qcom_smd_driver_unregister(struct qcom_smd_driver *qsdrv)
{
	driver_unregister(&qsdrv->driver);
}
EXPORT_SYMBOL(qcom_smd_driver_unregister);

/*
 * Allocate the qcom_smd_channel object for a newly found smd channel,
 * retrieving and validating the smem items involved.
 */
static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *edge,
							unsigned smem_info_item,
							unsigned smem_fifo_item,
							char *name)
{
	struct qcom_smd_channel *channel;
	struct qcom_smd *smd = edge->smd;
	size_t fifo_size;
	size_t info_size;
	void *fifo_base;
	void *info;
	int ret;

	channel = devm_kzalloc(smd->dev, sizeof(*channel), GFP_KERNEL);
	if (!channel)
		return ERR_PTR(-ENOMEM);

	channel->edge = edge;
	channel->name = devm_kstrdup(smd->dev, name, GFP_KERNEL);
	if (!channel->name)
		return ERR_PTR(-ENOMEM);

	mutex_init(&channel->tx_lock);
	spin_lock_init(&channel->recv_lock);
	init_waitqueue_head(&channel->fblockread_event);

	ret = qcom_smem_get(edge->remote_pid, smem_info_item, (void **)&info,
			    &info_size);
	if (ret)
		goto free_name_and_channel;

	/*
	 * Use the size of the item to figure out which channel info struct to
	 * use.
	 */
	if (info_size == 2 * sizeof(struct smd_channel_info_word)) {
		channel->tx_info_word = info;
		channel->rx_info_word = info + sizeof(struct smd_channel_info_word);
	} else if (info_size == 2 * sizeof(struct smd_channel_info)) {
		channel->tx_info = info;
		channel->rx_info = info + sizeof(struct smd_channel_info);
	} else {
		dev_err(smd->dev,
			"channel info of size %zu not supported\n", info_size);
		ret = -EINVAL;
		goto free_name_and_channel;
	}

	ret = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_base,
			    &fifo_size);
	if (ret)
		goto free_name_and_channel;

	/* The channel consist of a rx and tx fifo of equal size */
	fifo_size /= 2;

	dev_dbg(smd->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n",
			  name, info_size, fifo_size);

	channel->tx_fifo = fifo_base;
	channel->rx_fifo = fifo_base + fifo_size;
	channel->fifo_size = fifo_size;

	qcom_smd_channel_reset(channel);

	return channel;

free_name_and_channel:
	devm_kfree(smd->dev, channel->name);
	devm_kfree(smd->dev, channel);

	return ERR_PTR(ret);
}

/*
 * Scans the allocation table for any newly allocated channels, calls
 * qcom_smd_create_channel() to create representations of these and add
 * them to the edge's list of channels.
 */
static void qcom_discover_channels(struct qcom_smd_edge *edge)
{
	struct qcom_smd_alloc_entry *alloc_tbl;
	struct qcom_smd_alloc_entry *entry;
	struct qcom_smd_channel *channel;
	struct qcom_smd *smd = edge->smd;
	unsigned long flags;
	unsigned fifo_id;
	unsigned info_id;
	int ret;
	int tbl;
	int i;

	for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) {
		ret = qcom_smem_get(edge->remote_pid,
				    smem_items[tbl].alloc_tbl_id,
				    (void **)&alloc_tbl,
				    NULL);
		if (ret < 0)
			continue;

		for (i = 0; i < SMD_ALLOC_TBL_SIZE; i++) {
			entry = &alloc_tbl[i];
			if (test_bit(i, edge->allocated[tbl]))
				continue;

			if (entry->ref_count == 0)
				continue;

			if (!entry->name[0])
				continue;

			if (!(entry->flags & SMD_CHANNEL_FLAGS_PACKET))
				continue;

			if ((entry->flags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id)
				continue;

			info_id = smem_items[tbl].info_base_id + entry->cid;
			fifo_id = smem_items[tbl].fifo_base_id + entry->cid;

			channel = qcom_smd_create_channel(edge, info_id, fifo_id, entry->name);
			if (IS_ERR(channel))
				continue;

			spin_lock_irqsave(&edge->channels_lock, flags);
			list_add(&channel->list, &edge->channels);
			spin_unlock_irqrestore(&edge->channels_lock, flags);

			dev_dbg(smd->dev, "new channel found: '%s'\n", channel->name);
			set_bit(i, edge->allocated[tbl]);
		}
	}

	schedule_work(&edge->work);
}

/*
 * This per edge worker scans smem for any new channels and register these. It
 * then scans all registered channels for state changes that should be handled
 * by creating or destroying smd client devices for the registered channels.
 *
 * LOCKING: edge->channels_lock is not needed to be held during the traversal
 * of the channels list as it's done synchronously with the only writer.
 */
static void qcom_channel_state_worker(struct work_struct *work)
{
	struct qcom_smd_channel *channel;
	struct qcom_smd_edge *edge = container_of(work,
						  struct qcom_smd_edge,
						  work);
	unsigned remote_state;

	/*
	 * Rescan smem if we have reason to belive that there are new channels.
	 */
	if (edge->need_rescan) {
		edge->need_rescan = false;
		qcom_discover_channels(edge);
	}

	/*
	 * Register a device for any closed channel where the remote processor
	 * is showing interest in opening the channel.
	 */
	list_for_each_entry(channel, &edge->channels, list) {
		if (channel->state != SMD_CHANNEL_CLOSED)
			continue;

		remote_state = GET_RX_CHANNEL_INFO(channel, state);
		if (remote_state != SMD_CHANNEL_OPENING &&
		    remote_state != SMD_CHANNEL_OPENED)
			continue;

		qcom_smd_create_device(channel);
	}

	/*
	 * Unregister the device for any channel that is opened where the
	 * remote processor is closing the channel.
	 */
	list_for_each_entry(channel, &edge->channels, list) {
		if (channel->state != SMD_CHANNEL_OPENING &&
		    channel->state != SMD_CHANNEL_OPENED)
			continue;

		remote_state = GET_RX_CHANNEL_INFO(channel, state);
		if (remote_state == SMD_CHANNEL_OPENING ||
		    remote_state == SMD_CHANNEL_OPENED)
			continue;

		qcom_smd_destroy_device(channel);
	}
}

/*
 * Parses an of_node describing an edge.
 */
static int qcom_smd_parse_edge(struct device *dev,
			       struct device_node *node,
			       struct qcom_smd_edge *edge)
{
	struct device_node *syscon_np;
	const char *key;
	int irq;
	int ret;

	INIT_LIST_HEAD(&edge->channels);
	spin_lock_init(&edge->channels_lock);

	INIT_WORK(&edge->work, qcom_channel_state_worker);

	edge->of_node = of_node_get(node);

	irq = irq_of_parse_and_map(node, 0);
	if (irq < 0) {
		dev_err(dev, "required smd interrupt missing\n");
		return -EINVAL;
	}

	ret = devm_request_irq(dev, irq,
			       qcom_smd_edge_intr, IRQF_TRIGGER_RISING,
			       node->name, edge);
	if (ret) {
		dev_err(dev, "failed to request smd irq\n");
		return ret;
	}

	edge->irq = irq;

	key = "qcom,smd-edge";
	ret = of_property_read_u32(node, key, &edge->edge_id);
	if (ret) {
		dev_err(dev, "edge missing %s property\n", key);
		return -EINVAL;
	}

	edge->remote_pid = QCOM_SMEM_HOST_ANY;
	key = "qcom,remote-pid";
	of_property_read_u32(node, key, &edge->remote_pid);

	syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
	if (!syscon_np) {
		dev_err(dev, "no qcom,ipc node\n");
		return -ENODEV;
	}

	edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
	if (IS_ERR(edge->ipc_regmap))
		return PTR_ERR(edge->ipc_regmap);

	key = "qcom,ipc";
	ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
	if (ret < 0) {
		dev_err(dev, "no offset in %s\n", key);
		return -EINVAL;
	}

	ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
	if (ret < 0) {
		dev_err(dev, "no bit in %s\n", key);
		return -EINVAL;
	}

	return 0;
}

static int qcom_smd_probe(struct platform_device *pdev)
{
	struct qcom_smd_edge *edge;
	struct device_node *node;
	struct qcom_smd *smd;
	size_t array_size;
	int num_edges;
	int ret;
	int i = 0;

	/* Wait for smem */
	ret = qcom_smem_get(QCOM_SMEM_HOST_ANY, smem_items[0].alloc_tbl_id, NULL, NULL);
	if (ret == -EPROBE_DEFER)
		return ret;

	num_edges = of_get_available_child_count(pdev->dev.of_node);
	array_size = sizeof(*smd) + num_edges * sizeof(struct qcom_smd_edge);
	smd = devm_kzalloc(&pdev->dev, array_size, GFP_KERNEL);
	if (!smd)
		return -ENOMEM;
	smd->dev = &pdev->dev;

	smd->num_edges = num_edges;
	for_each_available_child_of_node(pdev->dev.of_node, node) {
		edge = &smd->edges[i++];
		edge->smd = smd;

		ret = qcom_smd_parse_edge(&pdev->dev, node, edge);
		if (ret)
			continue;

		edge->need_rescan = true;
		schedule_work(&edge->work);
	}

	platform_set_drvdata(pdev, smd);

	return 0;
}

/*
 * Shut down all smd clients by making sure that each edge stops processing
 * events and scanning for new channels, then call destroy on the devices.
 */
static int qcom_smd_remove(struct platform_device *pdev)
{
	struct qcom_smd_channel *channel;
	struct qcom_smd_edge *edge;
	struct qcom_smd *smd = platform_get_drvdata(pdev);
	int i;

	for (i = 0; i < smd->num_edges; i++) {
		edge = &smd->edges[i];

		disable_irq(edge->irq);
		cancel_work_sync(&edge->work);

		list_for_each_entry(channel, &edge->channels, list) {
			if (!channel->qsdev)
				continue;

			qcom_smd_destroy_device(channel);
		}
	}

	return 0;
}

static const struct of_device_id qcom_smd_of_match[] = {
	{ .compatible = "qcom,smd" },
	{}
};
MODULE_DEVICE_TABLE(of, qcom_smd_of_match);

static struct platform_driver qcom_smd_driver = {
	.probe = qcom_smd_probe,
	.remove = qcom_smd_remove,
	.driver = {
		.name = "qcom-smd",
		.of_match_table = qcom_smd_of_match,
	},
};

static int __init qcom_smd_init(void)
{
	int ret;

	ret = bus_register(&qcom_smd_bus);
	if (ret) {
		pr_err("failed to register smd bus: %d\n", ret);
		return ret;
	}

	return platform_driver_register(&qcom_smd_driver);
}
postcore_initcall(qcom_smd_init);

static void __exit qcom_smd_exit(void)
{
	platform_driver_unregister(&qcom_smd_driver);
	bus_unregister(&qcom_smd_bus);
}
module_exit(qcom_smd_exit);

MODULE_AUTHOR("Bjorn Andersson <[e-mail]>");
MODULE_DESCRIPTION("Qualcomm Shared Memory Driver");
MODULE_LICENSE("GPL v2");