tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#
2# Accelerometer drivers
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Accelerometers"
7
8config BMA180
9 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
10 depends on I2C
11 select IIO_BUFFER
12 select IIO_TRIGGERED_BUFFER
13 help
14 Say Y here if you want to build a driver for the Bosch BMA180 or
15 BMA250 triaxial acceleration sensor.
16
17 To compile this driver as a module, choose M here: the
18 module will be called bma180.
19
20config BMC150_ACCEL
21 tristate "Bosch BMC150 Accelerometer Driver"
22 depends on I2C
23 select IIO_BUFFER
24 select IIO_TRIGGERED_BUFFER
25 help
26 Say yes here to build support for the following Bosch accelerometers:
27 BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
28
29 Currently this only supports the device via an i2c interface.
30
31 This is a combo module with both accelerometer and magnetometer.
32 This driver is only implementing accelerometer part, which has
33 its own address and register map.
34
35config HID_SENSOR_ACCEL_3D
36 depends on HID_SENSOR_HUB
37 select IIO_BUFFER
38 select IIO_TRIGGERED_BUFFER
39 select HID_SENSOR_IIO_COMMON
40 select HID_SENSOR_IIO_TRIGGER
41 tristate "HID Accelerometers 3D"
42 help
43 Say yes here to build support for the HID SENSOR
44 accelerometers 3D.
45
46 To compile this driver as a module, choose M here: the
47 module will be called hid-sensor-accel-3d.
48
49config IIO_ST_ACCEL_3AXIS
50 tristate "STMicroelectronics accelerometers 3-Axis Driver"
51 depends on (I2C || SPI_MASTER) && SYSFS
52 select IIO_ST_SENSORS_CORE
53 select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
54 select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
55 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
56 help
57 Say yes here to build support for STMicroelectronics accelerometers:
58 LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
59 LIS331DLH, LSM303DL, LSM303DLM, LSM330.
60
61 This driver can also be built as a module. If so, these modules
62 will be created:
63 - st_accel (core functions for the driver [it is mandatory]);
64 - st_accel_i2c (necessary for the I2C devices [optional*]);
65 - st_accel_spi (necessary for the SPI devices [optional*]);
66
67 (*) one of these is necessary to do something.
68
69config IIO_ST_ACCEL_I2C_3AXIS
70 tristate
71 depends on IIO_ST_ACCEL_3AXIS
72 depends on IIO_ST_SENSORS_I2C
73
74config IIO_ST_ACCEL_SPI_3AXIS
75 tristate
76 depends on IIO_ST_ACCEL_3AXIS
77 depends on IIO_ST_SENSORS_SPI
78
79config KXSD9
80 tristate "Kionix KXSD9 Accelerometer Driver"
81 depends on SPI
82 help
83 Say yes here to build support for the Kionix KXSD9 accelerometer.
84 Currently this only supports the device via an SPI interface.
85
86 To compile this driver as a module, choose M here: the module
87 will be called kxsd9.
88
89config KXCJK1013
90 tristate "Kionix 3-Axis Accelerometer Driver"
91 depends on I2C
92 select IIO_BUFFER
93 select IIO_TRIGGERED_BUFFER
94 help
95 Say Y here if you want to build a driver for the Kionix KXCJK-1013
96 triaxial acceleration sensor. This driver also supports KXCJ9-1008
97 and KXTJ2-1009.
98
99 To compile this driver as a module, choose M here: the module will
100 be called kxcjk-1013.
101
102config MMA8452
103 tristate "Freescale MMA8452Q Accelerometer Driver"
104 depends on I2C
105 select IIO_BUFFER
106 select IIO_TRIGGERED_BUFFER
107 help
108 Say yes here to build support for the Freescale MMA8452Q 3-axis
109 accelerometer.
110
111 To compile this driver as a module, choose M here: the module
112 will be called mma8452.
113
114config MMA9551_CORE
115 tristate
116
117config MMA9551
118 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
119 depends on I2C
120 select MMA9551_CORE
121
122 help
123 Say yes here to build support for the Freescale MMA9551L
124 Intelligent Motion-Sensing Platform Driver.
125
126 To compile this driver as a module, choose M here: the module
127 will be called mma9551.
128
129config MMA9553
130 tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
131 depends on I2C
132 select MMA9551_CORE
133 help
134 Say yes here to build support for the Freescale MMA9553L
135 Intelligent Pedometer Platform Driver.
136
137 To compile this driver as a module, choose M here: the module
138 will be called mma9553.
139
140config STK8312
141 tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
142 depends on I2C
143 select IIO_BUFFER
144 select IIO_TRIGGERED_BUFFER
145 help
146 Say yes here to get support for the Sensortek STK8312 3-axis
147 accelerometer.
148
149 Choosing M will build the driver as a module. If so, the module
150 will be called stk8312.
151
152config STK8BA50
153 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
154 depends on I2C
155 help
156 Say yes here to get support for the Sensortek STK8BA50 3-axis
157 accelerometer.
158
159 Choosing M will build the driver as a module. If so, the module
160 will be called stk8ba50.
161
162endmenu