tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
9
10#include "vf610-pinfunc.h"
11#include <dt-bindings/clock/vf610-clock.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13#include <dt-bindings/gpio/gpio.h>
14
15/ {
16 aliases {
17 can0 = &can0;
18 can1 = &can1;
19 serial0 = &uart0;
20 serial1 = &uart1;
21 serial2 = &uart2;
22 serial3 = &uart3;
23 serial4 = &uart4;
24 serial5 = &uart5;
25 gpio0 = &gpio0;
26 gpio1 = &gpio1;
27 gpio2 = &gpio2;
28 gpio3 = &gpio3;
29 gpio4 = &gpio4;
30 usbphy0 = &usbphy0;
31 usbphy1 = &usbphy1;
32 };
33
34 fxosc: fxosc {
35 compatible = "fixed-clock";
36 #clock-cells = <0>;
37 clock-frequency = <24000000>;
38 };
39
40 sxosc: sxosc {
41 compatible = "fixed-clock";
42 #clock-cells = <0>;
43 clock-frequency = <32768>;
44 };
45
46 reboot: syscon-reboot {
47 compatible = "syscon-reboot";
48 regmap = <&src>;
49 offset = <0x0>;
50 mask = <0x1000>;
51 };
52
53 soc {
54 #address-cells = <1>;
55 #size-cells = <1>;
56 compatible = "simple-bus";
57 interrupt-parent = <&mscm_ir>;
58 ranges;
59
60 aips0: aips-bus@40000000 {
61 compatible = "fsl,aips-bus", "simple-bus";
62 #address-cells = <1>;
63 #size-cells = <1>;
64 ranges;
65
66 mscm_cpucfg: cpucfg@40001000 {
67 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
68 reg = <0x40001000 0x800>;
69 };
70
71 mscm_ir: interrupt-controller@40001800 {
72 compatible = "fsl,vf610-mscm-ir";
73 reg = <0x40001800 0x400>;
74 fsl,cpucfg = <&mscm_cpucfg>;
75 interrupt-controller;
76 #interrupt-cells = <2>;
77 };
78
79 edma0: dma-controller@40018000 {
80 #dma-cells = <2>;
81 compatible = "fsl,vf610-edma";
82 reg = <0x40018000 0x2000>,
83 <0x40024000 0x1000>,
84 <0x40025000 0x1000>;
85 dma-channels = <32>;
86 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
87 <9 IRQ_TYPE_LEVEL_HIGH>;
88 interrupt-names = "edma-tx", "edma-err";
89 clock-names = "dmamux0", "dmamux1";
90 clocks = <&clks VF610_CLK_DMAMUX0>,
91 <&clks VF610_CLK_DMAMUX1>;
92 status = "disabled";
93 };
94
95 can0: flexcan@40020000 {
96 compatible = "fsl,vf610-flexcan";
97 reg = <0x40020000 0x4000>;
98 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
99 clocks = <&clks VF610_CLK_FLEXCAN0>,
100 <&clks VF610_CLK_FLEXCAN0>;
101 clock-names = "ipg", "per";
102 status = "disabled";
103 };
104
105 uart0: serial@40027000 {
106 compatible = "fsl,vf610-lpuart";
107 reg = <0x40027000 0x1000>;
108 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
109 clocks = <&clks VF610_CLK_UART0>;
110 clock-names = "ipg";
111 dmas = <&edma0 0 2>,
112 <&edma0 0 3>;
113 dma-names = "rx","tx";
114 status = "disabled";
115 };
116
117 uart1: serial@40028000 {
118 compatible = "fsl,vf610-lpuart";
119 reg = <0x40028000 0x1000>;
120 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
121 clocks = <&clks VF610_CLK_UART1>;
122 clock-names = "ipg";
123 dmas = <&edma0 0 4>,
124 <&edma0 0 5>;
125 dma-names = "rx","tx";
126 status = "disabled";
127 };
128
129 uart2: serial@40029000 {
130 compatible = "fsl,vf610-lpuart";
131 reg = <0x40029000 0x1000>;
132 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
133 clocks = <&clks VF610_CLK_UART2>;
134 clock-names = "ipg";
135 dmas = <&edma0 0 6>,
136 <&edma0 0 7>;
137 dma-names = "rx","tx";
138 status = "disabled";
139 };
140
141 uart3: serial@4002a000 {
142 compatible = "fsl,vf610-lpuart";
143 reg = <0x4002a000 0x1000>;
144 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
145 clocks = <&clks VF610_CLK_UART3>;
146 clock-names = "ipg";
147 dmas = <&edma0 0 8>,
148 <&edma0 0 9>;
149 dma-names = "rx","tx";
150 status = "disabled";
151 };
152
153 dspi0: dspi0@4002c000 {
154 #address-cells = <1>;
155 #size-cells = <0>;
156 compatible = "fsl,vf610-dspi";
157 reg = <0x4002c000 0x1000>;
158 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&clks VF610_CLK_DSPI0>;
160 clock-names = "dspi";
161 spi-num-chipselects = <5>;
162 status = "disabled";
163 };
164
165 dspi1: dspi1@4002d000 {
166 #address-cells = <1>;
167 #size-cells = <0>;
168 compatible = "fsl,vf610-dspi";
169 reg = <0x4002d000 0x1000>;
170 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
171 clocks = <&clks VF610_CLK_DSPI1>;
172 clock-names = "dspi";
173 spi-num-chipselects = <5>;
174 status = "disabled";
175 };
176
177 sai2: sai@40031000 {
178 compatible = "fsl,vf610-sai";
179 reg = <0x40031000 0x1000>;
180 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
181 clocks = <&clks VF610_CLK_SAI2>;
182 clock-names = "sai";
183 dma-names = "tx", "rx";
184 dmas = <&edma0 0 21>,
185 <&edma0 0 20>;
186 status = "disabled";
187 };
188
189 pit: pit@40037000 {
190 compatible = "fsl,vf610-pit";
191 reg = <0x40037000 0x1000>;
192 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
193 clocks = <&clks VF610_CLK_PIT>;
194 clock-names = "pit";
195 };
196
197 pwm0: pwm@40038000 {
198 compatible = "fsl,vf610-ftm-pwm";
199 #pwm-cells = <3>;
200 reg = <0x40038000 0x1000>;
201 clock-names = "ftm_sys", "ftm_ext",
202 "ftm_fix", "ftm_cnt_clk_en";
203 clocks = <&clks VF610_CLK_FTM0>,
204 <&clks VF610_CLK_FTM0_EXT_SEL>,
205 <&clks VF610_CLK_FTM0_FIX_SEL>,
206 <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
207 status = "disabled";
208 };
209
210 pwm1: pwm@40039000 {
211 compatible = "fsl,vf610-ftm-pwm";
212 #pwm-cells = <3>;
213 reg = <0x40039000 0x1000>;
214 clock-names = "ftm_sys", "ftm_ext",
215 "ftm_fix", "ftm_cnt_clk_en";
216 clocks = <&clks VF610_CLK_FTM1>,
217 <&clks VF610_CLK_FTM1_EXT_SEL>,
218 <&clks VF610_CLK_FTM1_FIX_SEL>,
219 <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
220 status = "disabled";
221 };
222
223 adc0: adc@4003b000 {
224 compatible = "fsl,vf610-adc";
225 reg = <0x4003b000 0x1000>;
226 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
227 clocks = <&clks VF610_CLK_ADC0>;
228 clock-names = "adc";
229 #io-channel-cells = <1>;
230 status = "disabled";
231 fsl,adck-max-frequency = <30000000>, <40000000>,
232 <20000000>;
233 };
234
235 wdoga5: wdog@4003e000 {
236 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
237 reg = <0x4003e000 0x1000>;
238 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
239 clocks = <&clks VF610_CLK_WDT>;
240 clock-names = "wdog";
241 status = "disabled";
242 };
243
244 qspi0: quadspi@40044000 {
245 #address-cells = <1>;
246 #size-cells = <0>;
247 compatible = "fsl,vf610-qspi";
248 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
249 reg-names = "QuadSPI", "QuadSPI-memory";
250 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
251 clocks = <&clks VF610_CLK_QSPI0_EN>,
252 <&clks VF610_CLK_QSPI0>;
253 clock-names = "qspi_en", "qspi";
254 status = "disabled";
255 };
256
257 iomuxc: iomuxc@40048000 {
258 compatible = "fsl,vf610-iomuxc";
259 reg = <0x40048000 0x1000>;
260 };
261
262 gpio0: gpio@40049000 {
263 compatible = "fsl,vf610-gpio";
264 reg = <0x40049000 0x1000 0x400ff000 0x40>;
265 gpio-controller;
266 #gpio-cells = <2>;
267 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
268 interrupt-controller;
269 #interrupt-cells = <2>;
270 gpio-ranges = <&iomuxc 0 0 32>;
271 };
272
273 gpio1: gpio@4004a000 {
274 compatible = "fsl,vf610-gpio";
275 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
276 gpio-controller;
277 #gpio-cells = <2>;
278 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
279 interrupt-controller;
280 #interrupt-cells = <2>;
281 gpio-ranges = <&iomuxc 0 32 32>;
282 };
283
284 gpio2: gpio@4004b000 {
285 compatible = "fsl,vf610-gpio";
286 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
287 gpio-controller;
288 #gpio-cells = <2>;
289 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
290 interrupt-controller;
291 #interrupt-cells = <2>;
292 gpio-ranges = <&iomuxc 0 64 32>;
293 };
294
295 gpio3: gpio@4004c000 {
296 compatible = "fsl,vf610-gpio";
297 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
298 gpio-controller;
299 #gpio-cells = <2>;
300 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
301 interrupt-controller;
302 #interrupt-cells = <2>;
303 gpio-ranges = <&iomuxc 0 96 32>;
304 };
305
306 gpio4: gpio@4004d000 {
307 compatible = "fsl,vf610-gpio";
308 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
309 gpio-controller;
310 #gpio-cells = <2>;
311 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
312 interrupt-controller;
313 #interrupt-cells = <2>;
314 gpio-ranges = <&iomuxc 0 128 7>;
315 };
316
317 anatop: anatop@40050000 {
318 compatible = "fsl,vf610-anatop", "syscon";
319 reg = <0x40050000 0x400>;
320 };
321
322 usbphy0: usbphy@40050800 {
323 compatible = "fsl,vf610-usbphy";
324 reg = <0x40050800 0x400>;
325 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
326 clocks = <&clks VF610_CLK_USBPHY0>;
327 fsl,anatop = <&anatop>;
328 status = "disabled";
329 };
330
331 usbphy1: usbphy@40050c00 {
332 compatible = "fsl,vf610-usbphy";
333 reg = <0x40050c00 0x400>;
334 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
335 clocks = <&clks VF610_CLK_USBPHY1>;
336 fsl,anatop = <&anatop>;
337 status = "disabled";
338 };
339
340 i2c0: i2c@40066000 {
341 #address-cells = <1>;
342 #size-cells = <0>;
343 compatible = "fsl,vf610-i2c";
344 reg = <0x40066000 0x1000>;
345 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
346 clocks = <&clks VF610_CLK_I2C0>;
347 clock-names = "ipg";
348 dmas = <&edma0 0 50>,
349 <&edma0 0 51>;
350 dma-names = "rx","tx";
351 status = "disabled";
352 };
353
354 i2c1: i2c@40067000 {
355 #address-cells = <1>;
356 #size-cells = <0>;
357 compatible = "fsl,vf610-i2c";
358 reg = <0x40067000 0x1000>;
359 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
360 clocks = <&clks VF610_CLK_I2C1>;
361 clock-names = "ipg";
362 dmas = <&edma0 0 52>,
363 <&edma0 0 53>;
364 dma-names = "rx","tx";
365 status = "disabled";
366 };
367
368 clks: ccm@4006b000 {
369 compatible = "fsl,vf610-ccm";
370 reg = <0x4006b000 0x1000>;
371 clocks = <&sxosc>, <&fxosc>;
372 clock-names = "sxosc", "fxosc";
373 #clock-cells = <1>;
374 };
375
376 usbdev0: usb@40034000 {
377 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
378 reg = <0x40034000 0x800>;
379 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
380 clocks = <&clks VF610_CLK_USBC0>;
381 fsl,usbphy = <&usbphy0>;
382 fsl,usbmisc = <&usbmisc0 0>;
383 dr_mode = "peripheral";
384 status = "disabled";
385 };
386
387 usbmisc0: usb@40034800 {
388 #index-cells = <1>;
389 compatible = "fsl,vf610-usbmisc";
390 reg = <0x40034800 0x200>;
391 clocks = <&clks VF610_CLK_USBC0>;
392 status = "disabled";
393 };
394
395 src: src@4006e000 {
396 compatible = "fsl,vf610-src", "syscon";
397 reg = <0x4006e000 0x1000>;
398 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
399 };
400 };
401
402 aips1: aips-bus@40080000 {
403 compatible = "fsl,aips-bus", "simple-bus";
404 #address-cells = <1>;
405 #size-cells = <1>;
406 ranges;
407
408 edma1: dma-controller@40098000 {
409 #dma-cells = <2>;
410 compatible = "fsl,vf610-edma";
411 reg = <0x40098000 0x2000>,
412 <0x400a1000 0x1000>,
413 <0x400a2000 0x1000>;
414 dma-channels = <32>;
415 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
416 <11 IRQ_TYPE_LEVEL_HIGH>;
417 interrupt-names = "edma-tx", "edma-err";
418 clock-names = "dmamux0", "dmamux1";
419 clocks = <&clks VF610_CLK_DMAMUX2>,
420 <&clks VF610_CLK_DMAMUX3>;
421 status = "disabled";
422 };
423
424 snvs0: snvs@400a7000 {
425 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
426 reg = <0x400a7000 0x2000>;
427
428 snvsrtc: snvs-rtc-lp {
429 compatible = "fsl,sec-v4.0-mon-rtc-lp";
430 regmap = <&snvs0>;
431 offset = <0x34>;
432 interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
433 clocks = <&clks VF610_CLK_SNVS>;
434 clock-names = "snvs-rtc";
435 };
436 };
437
438 uart4: serial@400a9000 {
439 compatible = "fsl,vf610-lpuart";
440 reg = <0x400a9000 0x1000>;
441 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
442 clocks = <&clks VF610_CLK_UART4>;
443 clock-names = "ipg";
444 status = "disabled";
445 };
446
447 uart5: serial@400aa000 {
448 compatible = "fsl,vf610-lpuart";
449 reg = <0x400aa000 0x1000>;
450 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
451 clocks = <&clks VF610_CLK_UART5>;
452 clock-names = "ipg";
453 status = "disabled";
454 };
455
456 adc1: adc@400bb000 {
457 compatible = "fsl,vf610-adc";
458 reg = <0x400bb000 0x1000>;
459 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
460 clocks = <&clks VF610_CLK_ADC1>;
461 clock-names = "adc";
462 #io-channel-cells = <1>;
463 status = "disabled";
464 };
465
466 esdhc0: esdhc@400b1000 {
467 compatible = "fsl,imx53-esdhc";
468 reg = <0x400b1000 0x1000>;
469 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
470 clocks = <&clks VF610_CLK_IPG_BUS>,
471 <&clks VF610_CLK_PLATFORM_BUS>,
472 <&clks VF610_CLK_ESDHC0>;
473 clock-names = "ipg", "ahb", "per";
474 status = "disabled";
475 fsl,adck-max-frequency = <30000000>, <40000000>,
476 <20000000>;
477 };
478
479 esdhc1: esdhc@400b2000 {
480 compatible = "fsl,imx53-esdhc";
481 reg = <0x400b2000 0x1000>;
482 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
483 clocks = <&clks VF610_CLK_IPG_BUS>,
484 <&clks VF610_CLK_PLATFORM_BUS>,
485 <&clks VF610_CLK_ESDHC1>;
486 clock-names = "ipg", "ahb", "per";
487 status = "disabled";
488 };
489
490 usbh1: usb@400b4000 {
491 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
492 reg = <0x400b4000 0x800>;
493 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
494 clocks = <&clks VF610_CLK_USBC1>;
495 fsl,usbphy = <&usbphy1>;
496 fsl,usbmisc = <&usbmisc1 0>;
497 dr_mode = "host";
498 status = "disabled";
499 };
500
501 usbmisc1: usb@400b4800 {
502 #index-cells = <1>;
503 compatible = "fsl,vf610-usbmisc";
504 reg = <0x400b4800 0x200>;
505 clocks = <&clks VF610_CLK_USBC1>;
506 status = "disabled";
507 };
508
509 ftm: ftm@400b8000 {
510 compatible = "fsl,ftm-timer";
511 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
512 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
513 clock-names = "ftm-evt", "ftm-src",
514 "ftm-evt-counter-en", "ftm-src-counter-en";
515 clocks = <&clks VF610_CLK_FTM2>,
516 <&clks VF610_CLK_FTM3>,
517 <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
518 <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
519 status = "disabled";
520 };
521
522 qspi1: quadspi@400c4000 {
523 #address-cells = <1>;
524 #size-cells = <0>;
525 compatible = "fsl,vf610-qspi";
526 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
527 reg-names = "QuadSPI", "QuadSPI-memory";
528 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
529 clocks = <&clks VF610_CLK_QSPI1_EN>,
530 <&clks VF610_CLK_QSPI1>;
531 clock-names = "qspi_en", "qspi";
532 status = "disabled";
533 };
534
535 fec0: ethernet@400d0000 {
536 compatible = "fsl,mvf600-fec";
537 reg = <0x400d0000 0x1000>;
538 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
539 clocks = <&clks VF610_CLK_ENET0>,
540 <&clks VF610_CLK_ENET0>,
541 <&clks VF610_CLK_ENET>;
542 clock-names = "ipg", "ahb", "ptp";
543 status = "disabled";
544 };
545
546 fec1: ethernet@400d1000 {
547 compatible = "fsl,mvf600-fec";
548 reg = <0x400d1000 0x1000>;
549 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
550 clocks = <&clks VF610_CLK_ENET1>,
551 <&clks VF610_CLK_ENET1>,
552 <&clks VF610_CLK_ENET>;
553 clock-names = "ipg", "ahb", "ptp";
554 status = "disabled";
555 };
556
557 can1: flexcan@400d4000 {
558 compatible = "fsl,vf610-flexcan";
559 reg = <0x400d4000 0x4000>;
560 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
561 clocks = <&clks VF610_CLK_FLEXCAN1>,
562 <&clks VF610_CLK_FLEXCAN1>;
563 clock-names = "ipg", "per";
564 status = "disabled";
565 };
566
567 i2c2: i2c@400e6000 {
568 #address-cells = <1>;
569 #size-cells = <0>;
570 compatible = "fsl,vf610-i2c";
571 reg = <0x400e6000 0x1000>;
572 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
573 clocks = <&clks VF610_CLK_I2C2>;
574 clock-names = "ipg";
575 dmas = <&edma0 1 36>,
576 <&edma0 1 37>;
577 dma-names = "rx","tx";
578 status = "disabled";
579 };
580
581 i2c3: i2c@400e7000 {
582 #address-cells = <1>;
583 #size-cells = <0>;
584 compatible = "fsl,vf610-i2c";
585 reg = <0x400e7000 0x1000>;
586 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
587 clocks = <&clks VF610_CLK_I2C3>;
588 clock-names = "ipg";
589 dmas = <&edma0 1 38>,
590 <&edma0 1 39>;
591 dma-names = "rx","tx";
592 status = "disabled";
593 };
594 };
595 };
596};