tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra74x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13
14/ {
15 model = "TI AM5728 BeagleBoard-X15";
16 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
17
18 aliases {
19 rtc0 = &mcp_rtc;
20 rtc1 = &tps659038_rtc;
21 rtc2 = &rtc;
22 display0 = &hdmi0;
23 };
24
25 memory {
26 device_type = "memory";
27 reg = <0x80000000 0x80000000>;
28 };
29
30 vdd_3v3: fixedregulator-vdd_3v3 {
31 compatible = "regulator-fixed";
32 regulator-name = "vdd_3v3";
33 vin-supply = <®en1>;
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 };
37
38 vtt_fixed: fixedregulator-vtt {
39 /* TPS51200 */
40 compatible = "regulator-fixed";
41 regulator-name = "vtt_fixed";
42 vin-supply = <&smps3_reg>;
43 regulator-min-microvolt = <3300000>;
44 regulator-max-microvolt = <3300000>;
45 regulator-always-on;
46 regulator-boot-on;
47 enable-active-high;
48 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
49 };
50
51 leds {
52 compatible = "gpio-leds";
53 pinctrl-names = "default";
54 pinctrl-0 = <&leds_pins_default>;
55
56 led@0 {
57 label = "beagle-x15:usr0";
58 gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
59 linux,default-trigger = "heartbeat";
60 default-state = "off";
61 };
62
63 led@1 {
64 label = "beagle-x15:usr1";
65 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
66 linux,default-trigger = "cpu0";
67 default-state = "off";
68 };
69
70 led@2 {
71 label = "beagle-x15:usr2";
72 gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
73 linux,default-trigger = "mmc0";
74 default-state = "off";
75 };
76
77 led@3 {
78 label = "beagle-x15:usr3";
79 gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
80 linux,default-trigger = "ide-disk";
81 default-state = "off";
82 };
83 };
84
85 gpio_fan: gpio_fan {
86 /* Based on 5v 500mA AFB02505HHB */
87 compatible = "gpio-fan";
88 gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
89 gpio-fan,speed-map = <0 0>,
90 <13000 1>;
91 #cooling-cells = <2>;
92 };
93
94 extcon_usb1: extcon_usb1 {
95 compatible = "linux,extcon-usb-gpio";
96 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
97 pinctrl-names = "default";
98 pinctrl-0 = <&extcon_usb1_pins>;
99 };
100
101 extcon_usb2: extcon_usb2 {
102 compatible = "linux,extcon-usb-gpio";
103 id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
104 pinctrl-names = "default";
105 pinctrl-0 = <&extcon_usb2_pins>;
106 };
107
108 hdmi0: connector {
109 compatible = "hdmi-connector";
110 label = "hdmi";
111
112 type = "a";
113
114 port {
115 hdmi_connector_in: endpoint {
116 remote-endpoint = <&tpd12s015_out>;
117 };
118 };
119 };
120
121 tpd12s015: encoder {
122 compatible = "ti,tpd12s015";
123
124 pinctrl-names = "default";
125 pinctrl-0 = <&tpd12s015_pins>;
126
127 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
128 <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
129 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
130
131 ports {
132 #address-cells = <1>;
133 #size-cells = <0>;
134
135 port@0 {
136 reg = <0>;
137
138 tpd12s015_in: endpoint {
139 remote-endpoint = <&hdmi_out>;
140 };
141 };
142
143 port@1 {
144 reg = <1>;
145
146 tpd12s015_out: endpoint {
147 remote-endpoint = <&hdmi_connector_in>;
148 };
149 };
150 };
151 };
152};
153
154&dra7_pmx_core {
155 leds_pins_default: leds_pins_default {
156 pinctrl-single,pins = <
157 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
158 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
159 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
160 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
161 >;
162 };
163
164 i2c1_pins_default: i2c1_pins_default {
165 pinctrl-single,pins = <
166 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
167 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
168 >;
169 };
170
171 hdmi_pins: pinmux_hdmi_pins {
172 pinctrl-single,pins = <
173 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
174 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
175 >;
176 };
177
178 i2c3_pins_default: i2c3_pins_default {
179 pinctrl-single,pins = <
180 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
181 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
182 >;
183 };
184
185 uart3_pins_default: uart3_pins_default {
186 pinctrl-single,pins = <
187 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
188 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
189 >;
190 };
191
192 mmc1_pins_default: mmc1_pins_default {
193 pinctrl-single,pins = <
194 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
195 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
196 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
197 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
198 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
199 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
200 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
201 >;
202 };
203
204 mmc2_pins_default: mmc2_pins_default {
205 pinctrl-single,pins = <
206 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
207 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
208 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
209 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
210 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
211 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
212 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
213 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
214 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
215 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
216 >;
217 };
218
219 cpsw_pins_default: cpsw_pins_default {
220 pinctrl-single,pins = <
221 /* Slave 1 */
222 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
223 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
224 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
225 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
226 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
227 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
228 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
229 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
230 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
231 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
232 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
233 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
234
235 /* Slave 2 */
236 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
237 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
238 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
239 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
240 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
241 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
242 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
243 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
244 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
245 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
246 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
247 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
248 >;
249
250 };
251
252 cpsw_pins_sleep: cpsw_pins_sleep {
253 pinctrl-single,pins = <
254 /* Slave 1 */
255 0x250 (PIN_INPUT | MUX_MODE15)
256 0x254 (PIN_INPUT | MUX_MODE15)
257 0x258 (PIN_INPUT | MUX_MODE15)
258 0x25c (PIN_INPUT | MUX_MODE15)
259 0x260 (PIN_INPUT | MUX_MODE15)
260 0x264 (PIN_INPUT | MUX_MODE15)
261 0x268 (PIN_INPUT | MUX_MODE15)
262 0x26c (PIN_INPUT | MUX_MODE15)
263 0x270 (PIN_INPUT | MUX_MODE15)
264 0x274 (PIN_INPUT | MUX_MODE15)
265 0x278 (PIN_INPUT | MUX_MODE15)
266 0x27c (PIN_INPUT | MUX_MODE15)
267
268 /* Slave 2 */
269 0x198 (PIN_INPUT | MUX_MODE15)
270 0x19c (PIN_INPUT | MUX_MODE15)
271 0x1a0 (PIN_INPUT | MUX_MODE15)
272 0x1a4 (PIN_INPUT | MUX_MODE15)
273 0x1a8 (PIN_INPUT | MUX_MODE15)
274 0x1ac (PIN_INPUT | MUX_MODE15)
275 0x1b0 (PIN_INPUT | MUX_MODE15)
276 0x1b4 (PIN_INPUT | MUX_MODE15)
277 0x1b8 (PIN_INPUT | MUX_MODE15)
278 0x1bc (PIN_INPUT | MUX_MODE15)
279 0x1c0 (PIN_INPUT | MUX_MODE15)
280 0x1c4 (PIN_INPUT | MUX_MODE15)
281 >;
282 };
283
284 davinci_mdio_pins_default: davinci_mdio_pins_default {
285 pinctrl-single,pins = <
286 /* MDIO */
287 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
288 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
289 >;
290 };
291
292 davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
293 pinctrl-single,pins = <
294 0x23c (PIN_INPUT | MUX_MODE15)
295 0x240 (PIN_INPUT | MUX_MODE15)
296 >;
297 };
298
299 tps659038_pins_default: tps659038_pins_default {
300 pinctrl-single,pins = <
301 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
302 >;
303 };
304
305 tmp102_pins_default: tmp102_pins_default {
306 pinctrl-single,pins = <
307 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
308 >;
309 };
310
311 mcp79410_pins_default: mcp79410_pins_default {
312 pinctrl-single,pins = <
313 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
314 >;
315 };
316
317 usb1_pins: pinmux_usb1_pins {
318 pinctrl-single,pins = <
319 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
320 >;
321 };
322
323 extcon_usb1_pins: extcon_usb1_pins {
324 pinctrl-single,pins = <
325 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
326 >;
327 };
328
329 extcon_usb2_pins: extcon_usb2_pins {
330 pinctrl-single,pins = <
331 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
332 >;
333 };
334
335 tpd12s015_pins: pinmux_tpd12s015_pins {
336 pinctrl-single,pins = <
337 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
338 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
339 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
340 >;
341 };
342};
343
344&i2c1 {
345 status = "okay";
346 pinctrl-names = "default";
347 pinctrl-0 = <&i2c1_pins_default>;
348 clock-frequency = <400000>;
349
350 tps659038: tps659038@58 {
351 compatible = "ti,tps659038";
352 reg = <0x58>;
353 interrupt-parent = <&gpio1>;
354 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
355
356 pinctrl-names = "default";
357 pinctrl-0 = <&tps659038_pins_default>;
358
359 #interrupt-cells = <2>;
360 interrupt-controller;
361
362 ti,system-power-controller;
363
364 tps659038_pmic {
365 compatible = "ti,tps659038-pmic";
366
367 regulators {
368 smps12_reg: smps12 {
369 /* VDD_MPU */
370 regulator-name = "smps12";
371 regulator-min-microvolt = < 850000>;
372 regulator-max-microvolt = <1250000>;
373 regulator-always-on;
374 regulator-boot-on;
375 };
376
377 smps3_reg: smps3 {
378 /* VDD_DDR */
379 regulator-name = "smps3";
380 regulator-min-microvolt = <1350000>;
381 regulator-max-microvolt = <1350000>;
382 regulator-always-on;
383 regulator-boot-on;
384 };
385
386 smps45_reg: smps45 {
387 /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
388 regulator-name = "smps45";
389 regulator-min-microvolt = < 850000>;
390 regulator-max-microvolt = <1150000>;
391 regulator-always-on;
392 regulator-boot-on;
393 };
394
395 smps6_reg: smps6 {
396 /* VDD_CORE */
397 regulator-name = "smps6";
398 regulator-min-microvolt = <850000>;
399 regulator-max-microvolt = <1030000>;
400 regulator-always-on;
401 regulator-boot-on;
402 };
403
404 /* SMPS7 unused */
405
406 smps8_reg: smps8 {
407 /* VDD_1V8 */
408 regulator-name = "smps8";
409 regulator-min-microvolt = <1800000>;
410 regulator-max-microvolt = <1800000>;
411 regulator-always-on;
412 regulator-boot-on;
413 };
414
415 /* SMPS9 unused */
416
417 ldo1_reg: ldo1 {
418 /* VDD_SD */
419 regulator-name = "ldo1";
420 regulator-min-microvolt = <1800000>;
421 regulator-max-microvolt = <3300000>;
422 regulator-boot-on;
423 };
424
425 ldo2_reg: ldo2 {
426 /* VDD_SHV5 */
427 regulator-name = "ldo2";
428 regulator-min-microvolt = <3300000>;
429 regulator-max-microvolt = <3300000>;
430 regulator-always-on;
431 regulator-boot-on;
432 };
433
434 ldo3_reg: ldo3 {
435 /* VDDA_1V8_PHY */
436 regulator-name = "ldo3";
437 regulator-min-microvolt = <1800000>;
438 regulator-max-microvolt = <1800000>;
439 regulator-always-on;
440 regulator-boot-on;
441 };
442
443 ldo9_reg: ldo9 {
444 /* VDD_RTC */
445 regulator-name = "ldo9";
446 regulator-min-microvolt = <1050000>;
447 regulator-max-microvolt = <1050000>;
448 regulator-always-on;
449 regulator-boot-on;
450 };
451
452 ldoln_reg: ldoln {
453 /* VDDA_1V8_PLL */
454 regulator-name = "ldoln";
455 regulator-min-microvolt = <1800000>;
456 regulator-max-microvolt = <1800000>;
457 regulator-always-on;
458 regulator-boot-on;
459 };
460
461 ldousb_reg: ldousb {
462 /* VDDA_3V_USB: VDDA_USBHS33 */
463 regulator-name = "ldousb";
464 regulator-min-microvolt = <3300000>;
465 regulator-max-microvolt = <3300000>;
466 regulator-boot-on;
467 };
468
469 regen1: regen1 {
470 /* VDD_3V3_ON */
471 regulator-name = "regen1";
472 regulator-boot-on;
473 regulator-always-on;
474 };
475 };
476 };
477
478 tps659038_rtc: tps659038_rtc {
479 compatible = "ti,palmas-rtc";
480 interrupt-parent = <&tps659038>;
481 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
482 wakeup-source;
483 };
484
485 tps659038_pwr_button: tps659038_pwr_button {
486 compatible = "ti,palmas-pwrbutton";
487 interrupt-parent = <&tps659038>;
488 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
489 wakeup-source;
490 ti,palmas-long-press-seconds = <12>;
491 };
492
493 tps659038_gpio: tps659038_gpio {
494 compatible = "ti,palmas-gpio";
495 gpio-controller;
496 #gpio-cells = <2>;
497 };
498 };
499
500 tmp102: tmp102@48 {
501 compatible = "ti,tmp102";
502 reg = <0x48>;
503 pinctrl-names = "default";
504 pinctrl-0 = <&tmp102_pins_default>;
505 interrupt-parent = <&gpio7>;
506 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
507 #thermal-sensor-cells = <1>;
508 };
509};
510
511&i2c3 {
512 status = "okay";
513 pinctrl-names = "default";
514 pinctrl-0 = <&i2c3_pins_default>;
515 clock-frequency = <400000>;
516
517 mcp_rtc: rtc@6f {
518 compatible = "microchip,mcp7941x";
519 reg = <0x6f>;
520 interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
521
522 pinctrl-names = "default";
523 pinctrl-0 = <&mcp79410_pins_default>;
524
525 vcc-supply = <&vdd_3v3>;
526 wakeup-source;
527 };
528};
529
530&gpio7 {
531 ti,no-reset-on-init;
532 ti,no-idle-on-init;
533};
534
535&cpu0 {
536 cpu0-supply = <&smps12_reg>;
537 voltage-tolerance = <1>;
538};
539
540&uart3 {
541 status = "okay";
542 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
543 <&dra7_pmx_core 0x3f8>;
544
545 pinctrl-names = "default";
546 pinctrl-0 = <&uart3_pins_default>;
547};
548
549&mac {
550 status = "okay";
551 pinctrl-names = "default", "sleep";
552 pinctrl-0 = <&cpsw_pins_default>;
553 pinctrl-1 = <&cpsw_pins_sleep>;
554 dual_emac;
555};
556
557&cpsw_emac0 {
558 phy_id = <&davinci_mdio>, <1>;
559 phy-mode = "rgmii";
560 dual_emac_res_vlan = <1>;
561};
562
563&cpsw_emac1 {
564 phy_id = <&davinci_mdio>, <2>;
565 phy-mode = "rgmii";
566 dual_emac_res_vlan = <2>;
567};
568
569&davinci_mdio {
570 pinctrl-names = "default", "sleep";
571 pinctrl-0 = <&davinci_mdio_pins_default>;
572 pinctrl-1 = <&davinci_mdio_pins_sleep>;
573};
574
575&mmc1 {
576 status = "okay";
577
578 pinctrl-names = "default";
579 pinctrl-0 = <&mmc1_pins_default>;
580
581 vmmc-supply = <&ldo1_reg>;
582 vmmc_aux-supply = <&vdd_3v3>;
583 bus-width = <4>;
584 cd-gpios = <&gpio6 27 0>; /* gpio 219 */
585};
586
587&mmc2 {
588 status = "okay";
589
590 pinctrl-names = "default";
591 pinctrl-0 = <&mmc2_pins_default>;
592
593 vmmc-supply = <&vdd_3v3>;
594 bus-width = <8>;
595 ti,non-removable;
596 cap-mmc-dual-data-rate;
597};
598
599&sata {
600 status = "okay";
601};
602
603&usb2_phy1 {
604 phy-supply = <&ldousb_reg>;
605};
606
607&usb2_phy2 {
608 phy-supply = <&ldousb_reg>;
609};
610
611&usb1 {
612 dr_mode = "host";
613 pinctrl-names = "default";
614 pinctrl-0 = <&usb1_pins>;
615};
616
617&omap_dwc3_1 {
618 extcon = <&extcon_usb1>;
619};
620
621&omap_dwc3_2 {
622 extcon = <&extcon_usb2>;
623};
624
625&usb2 {
626 dr_mode = "peripheral";
627};
628
629&cpu_trips {
630 cpu_alert1: cpu_alert1 {
631 temperature = <50000>; /* millicelsius */
632 hysteresis = <2000>; /* millicelsius */
633 type = "active";
634 };
635};
636
637&cpu_cooling_maps {
638 map1 {
639 trip = <&cpu_alert1>;
640 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
641 };
642};
643
644&thermal_zones {
645 board_thermal: board_thermal {
646 polling-delay-passive = <1250>; /* milliseconds */
647 polling-delay = <1500>; /* milliseconds */
648
649 /* sensor ID */
650 thermal-sensors = <&tmp102 0>;
651
652 board_trips: trips {
653 board_alert0: board_alert {
654 temperature = <40000>; /* millicelsius */
655 hysteresis = <2000>; /* millicelsius */
656 type = "active";
657 };
658
659 board_crit: board_crit {
660 temperature = <105000>; /* millicelsius */
661 hysteresis = <0>; /* millicelsius */
662 type = "critical";
663 };
664 };
665
666 board_cooling_maps: cooling-maps {
667 map0 {
668 trip = <&board_alert0>;
669 cooling-device =
670 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
671 };
672 };
673 };
674};
675
676&dss {
677 status = "ok"
678
679 vdda_video-supply = <&ldoln_reg>;
680};
681
682&hdmi {
683 status = "ok"
684 vdda-supply = <&ldo3_reg>;
685
686 pinctrl-names = "default";
687 pinctrl-0 = <&hdmi_pins>;
688
689 port {
690 hdmi_out: endpoint {
691 remote-endpoint = <&tpd12s015_in>;
692 };
693 };
694};
695
696&pcie1 {
697 gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
698};