Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
2/*
3 * cec - HDMI Consumer Electronics Control public header
4 *
5 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
6 */
7
8#ifndef _CEC_UAPI_H
9#define _CEC_UAPI_H
10
11#include <linux/types.h>
12#include <linux/string.h>
13
14#define CEC_MAX_MSG_SIZE 16
15
16/**
17 * struct cec_msg - CEC message structure.
18 * @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
19 * driver when the message transmission has finished.
20 * @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
21 * driver when the message was received.
22 * @len: Length in bytes of the message.
23 * @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE.
24 * Set to 0 if you want to wait forever. This timeout can also be
25 * used with CEC_TRANSMIT as the timeout for waiting for a reply.
26 * If 0, then it will use a 1 second timeout instead of waiting
27 * forever as is done with CEC_RECEIVE.
28 * @sequence: The framework assigns a sequence number to messages that are
29 * sent. This can be used to track replies to previously sent
30 * messages.
31 * @flags: Set to 0.
32 * @msg: The message payload.
33 * @reply: This field is ignored with CEC_RECEIVE and is only used by
34 * CEC_TRANSMIT. If non-zero, then wait for a reply with this
35 * opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for
36 * a possible ABORT reply. If there was an error when sending the
37 * msg or FeatureAbort was returned, then reply is set to 0.
38 * If reply is non-zero upon return, then len/msg are set to
39 * the received message.
40 * If reply is zero upon return and status has the
41 * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to
42 * the received feature abort message.
43 * If reply is zero upon return and status has the
44 * CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at
45 * all. If reply is non-zero for CEC_TRANSMIT and the message is a
46 * broadcast, then -EINVAL is returned.
47 * if reply is non-zero, then timeout is set to 1000 (the required
48 * maximum response time).
49 * @rx_status: The message receive status bits. Set by the driver.
50 * @tx_status: The message transmit status bits. Set by the driver.
51 * @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver.
52 * @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver.
53 * @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the
54 * driver.
55 * @tx_error_cnt: The number of 'Error' events. Set by the driver.
56 */
57struct cec_msg {
58 __u64 tx_ts;
59 __u64 rx_ts;
60 __u32 len;
61 __u32 timeout;
62 __u32 sequence;
63 __u32 flags;
64 __u8 msg[CEC_MAX_MSG_SIZE];
65 __u8 reply;
66 __u8 rx_status;
67 __u8 tx_status;
68 __u8 tx_arb_lost_cnt;
69 __u8 tx_nack_cnt;
70 __u8 tx_low_drive_cnt;
71 __u8 tx_error_cnt;
72};
73
74/**
75 * cec_msg_initiator - return the initiator's logical address.
76 * @msg: the message structure
77 */
78static inline __u8 cec_msg_initiator(const struct cec_msg *msg)
79{
80 return msg->msg[0] >> 4;
81}
82
83/**
84 * cec_msg_destination - return the destination's logical address.
85 * @msg: the message structure
86 */
87static inline __u8 cec_msg_destination(const struct cec_msg *msg)
88{
89 return msg->msg[0] & 0xf;
90}
91
92/**
93 * cec_msg_opcode - return the opcode of the message, -1 for poll
94 * @msg: the message structure
95 */
96static inline int cec_msg_opcode(const struct cec_msg *msg)
97{
98 return msg->len > 1 ? msg->msg[1] : -1;
99}
100
101/**
102 * cec_msg_is_broadcast - return true if this is a broadcast message.
103 * @msg: the message structure
104 */
105static inline int cec_msg_is_broadcast(const struct cec_msg *msg)
106{
107 return (msg->msg[0] & 0xf) == 0xf;
108}
109
110/**
111 * cec_msg_init - initialize the message structure.
112 * @msg: the message structure
113 * @initiator: the logical address of the initiator
114 * @destination:the logical address of the destination (0xf for broadcast)
115 *
116 * The whole structure is zeroed, the len field is set to 1 (i.e. a poll
117 * message) and the initiator and destination are filled in.
118 */
119static inline void cec_msg_init(struct cec_msg *msg,
120 __u8 initiator, __u8 destination)
121{
122 memset(msg, 0, sizeof(*msg));
123 msg->msg[0] = (initiator << 4) | destination;
124 msg->len = 1;
125}
126
127/**
128 * cec_msg_set_reply_to - fill in destination/initiator in a reply message.
129 * @msg: the message structure for the reply
130 * @orig: the original message structure
131 *
132 * Set the msg destination to the orig initiator and the msg initiator to the
133 * orig destination. Note that msg and orig may be the same pointer, in which
134 * case the change is done in place.
135 */
136static inline void cec_msg_set_reply_to(struct cec_msg *msg,
137 struct cec_msg *orig)
138{
139 /* The destination becomes the initiator and vice versa */
140 msg->msg[0] = (cec_msg_destination(orig) << 4) |
141 cec_msg_initiator(orig);
142 msg->reply = msg->timeout = 0;
143}
144
145/* cec_msg flags field */
146#define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0)
147
148/* cec_msg tx/rx_status field */
149#define CEC_TX_STATUS_OK (1 << 0)
150#define CEC_TX_STATUS_ARB_LOST (1 << 1)
151#define CEC_TX_STATUS_NACK (1 << 2)
152#define CEC_TX_STATUS_LOW_DRIVE (1 << 3)
153#define CEC_TX_STATUS_ERROR (1 << 4)
154#define CEC_TX_STATUS_MAX_RETRIES (1 << 5)
155#define CEC_TX_STATUS_ABORTED (1 << 6)
156#define CEC_TX_STATUS_TIMEOUT (1 << 7)
157
158#define CEC_RX_STATUS_OK (1 << 0)
159#define CEC_RX_STATUS_TIMEOUT (1 << 1)
160#define CEC_RX_STATUS_FEATURE_ABORT (1 << 2)
161#define CEC_RX_STATUS_ABORTED (1 << 3)
162
163static inline int cec_msg_status_is_ok(const struct cec_msg *msg)
164{
165 if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK))
166 return 0;
167 if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK))
168 return 0;
169 if (!msg->tx_status && !msg->rx_status)
170 return 0;
171 return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT);
172}
173
174#define CEC_LOG_ADDR_INVALID 0xff
175#define CEC_PHYS_ADDR_INVALID 0xffff
176
177/*
178 * The maximum number of logical addresses one device can be assigned to.
179 * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
180 * Analog Devices CEC hardware supports 3. So let's go wild and go for 4.
181 */
182#define CEC_MAX_LOG_ADDRS 4
183
184/* The logical addresses defined by CEC 2.0 */
185#define CEC_LOG_ADDR_TV 0
186#define CEC_LOG_ADDR_RECORD_1 1
187#define CEC_LOG_ADDR_RECORD_2 2
188#define CEC_LOG_ADDR_TUNER_1 3
189#define CEC_LOG_ADDR_PLAYBACK_1 4
190#define CEC_LOG_ADDR_AUDIOSYSTEM 5
191#define CEC_LOG_ADDR_TUNER_2 6
192#define CEC_LOG_ADDR_TUNER_3 7
193#define CEC_LOG_ADDR_PLAYBACK_2 8
194#define CEC_LOG_ADDR_RECORD_3 9
195#define CEC_LOG_ADDR_TUNER_4 10
196#define CEC_LOG_ADDR_PLAYBACK_3 11
197#define CEC_LOG_ADDR_BACKUP_1 12
198#define CEC_LOG_ADDR_BACKUP_2 13
199#define CEC_LOG_ADDR_SPECIFIC 14
200#define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */
201#define CEC_LOG_ADDR_BROADCAST 15 /* as destination address */
202
203/* The logical address types that the CEC device wants to claim */
204#define CEC_LOG_ADDR_TYPE_TV 0
205#define CEC_LOG_ADDR_TYPE_RECORD 1
206#define CEC_LOG_ADDR_TYPE_TUNER 2
207#define CEC_LOG_ADDR_TYPE_PLAYBACK 3
208#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4
209#define CEC_LOG_ADDR_TYPE_SPECIFIC 5
210#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6
211/*
212 * Switches should use UNREGISTERED.
213 * Processors should use SPECIFIC.
214 */
215
216#define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV)
217#define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \
218 (1 << CEC_LOG_ADDR_RECORD_2) | \
219 (1 << CEC_LOG_ADDR_RECORD_3))
220#define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \
221 (1 << CEC_LOG_ADDR_TUNER_2) | \
222 (1 << CEC_LOG_ADDR_TUNER_3) | \
223 (1 << CEC_LOG_ADDR_TUNER_4))
224#define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \
225 (1 << CEC_LOG_ADDR_PLAYBACK_2) | \
226 (1 << CEC_LOG_ADDR_PLAYBACK_3))
227#define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM)
228#define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \
229 (1 << CEC_LOG_ADDR_BACKUP_2))
230#define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC)
231#define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED)
232
233static inline int cec_has_tv(__u16 log_addr_mask)
234{
235 return log_addr_mask & CEC_LOG_ADDR_MASK_TV;
236}
237
238static inline int cec_has_record(__u16 log_addr_mask)
239{
240 return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD;
241}
242
243static inline int cec_has_tuner(__u16 log_addr_mask)
244{
245 return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER;
246}
247
248static inline int cec_has_playback(__u16 log_addr_mask)
249{
250 return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK;
251}
252
253static inline int cec_has_audiosystem(__u16 log_addr_mask)
254{
255 return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
256}
257
258static inline int cec_has_backup(__u16 log_addr_mask)
259{
260 return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP;
261}
262
263static inline int cec_has_specific(__u16 log_addr_mask)
264{
265 return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC;
266}
267
268static inline int cec_is_unregistered(__u16 log_addr_mask)
269{
270 return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED;
271}
272
273static inline int cec_is_unconfigured(__u16 log_addr_mask)
274{
275 return log_addr_mask == 0;
276}
277
278/*
279 * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID
280 * should be disabled (CEC_S_VENDOR_ID)
281 */
282#define CEC_VENDOR_ID_NONE 0xffffffff
283
284/* The message handling modes */
285/* Modes for initiator */
286#define CEC_MODE_NO_INITIATOR (0x0 << 0)
287#define CEC_MODE_INITIATOR (0x1 << 0)
288#define CEC_MODE_EXCL_INITIATOR (0x2 << 0)
289#define CEC_MODE_INITIATOR_MSK 0x0f
290
291/* Modes for follower */
292#define CEC_MODE_NO_FOLLOWER (0x0 << 4)
293#define CEC_MODE_FOLLOWER (0x1 << 4)
294#define CEC_MODE_EXCL_FOLLOWER (0x2 << 4)
295#define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4)
296#define CEC_MODE_MONITOR_PIN (0xd << 4)
297#define CEC_MODE_MONITOR (0xe << 4)
298#define CEC_MODE_MONITOR_ALL (0xf << 4)
299#define CEC_MODE_FOLLOWER_MSK 0xf0
300
301/* Userspace has to configure the physical address */
302#define CEC_CAP_PHYS_ADDR (1 << 0)
303/* Userspace has to configure the logical addresses */
304#define CEC_CAP_LOG_ADDRS (1 << 1)
305/* Userspace can transmit messages (and thus become follower as well) */
306#define CEC_CAP_TRANSMIT (1 << 2)
307/*
308 * Passthrough all messages instead of processing them.
309 */
310#define CEC_CAP_PASSTHROUGH (1 << 3)
311/* Supports remote control */
312#define CEC_CAP_RC (1 << 4)
313/* Hardware can monitor all messages, not just directed and broadcast. */
314#define CEC_CAP_MONITOR_ALL (1 << 5)
315/* Hardware can use CEC only if the HDMI HPD pin is high. */
316#define CEC_CAP_NEEDS_HPD (1 << 6)
317/* Hardware can monitor CEC pin transitions */
318#define CEC_CAP_MONITOR_PIN (1 << 7)
319
320/**
321 * struct cec_caps - CEC capabilities structure.
322 * @driver: name of the CEC device driver.
323 * @name: name of the CEC device. @driver + @name must be unique.
324 * @available_log_addrs: number of available logical addresses.
325 * @capabilities: capabilities of the CEC adapter.
326 * @version: version of the CEC adapter framework.
327 */
328struct cec_caps {
329 char driver[32];
330 char name[32];
331 __u32 available_log_addrs;
332 __u32 capabilities;
333 __u32 version;
334};
335
336/**
337 * struct cec_log_addrs - CEC logical addresses structure.
338 * @log_addr: the claimed logical addresses. Set by the driver.
339 * @log_addr_mask: current logical address mask. Set by the driver.
340 * @cec_version: the CEC version that the adapter should implement. Set by the
341 * caller.
342 * @num_log_addrs: how many logical addresses should be claimed. Set by the
343 * caller.
344 * @vendor_id: the vendor ID of the device. Set by the caller.
345 * @flags: flags.
346 * @osd_name: the OSD name of the device. Set by the caller.
347 * @primary_device_type: the primary device type for each logical address.
348 * Set by the caller.
349 * @log_addr_type: the logical address types. Set by the caller.
350 * @all_device_types: CEC 2.0: all device types represented by the logical
351 * address. Set by the caller.
352 * @features: CEC 2.0: The logical address features. Set by the caller.
353 */
354struct cec_log_addrs {
355 __u8 log_addr[CEC_MAX_LOG_ADDRS];
356 __u16 log_addr_mask;
357 __u8 cec_version;
358 __u8 num_log_addrs;
359 __u32 vendor_id;
360 __u32 flags;
361 char osd_name[15];
362 __u8 primary_device_type[CEC_MAX_LOG_ADDRS];
363 __u8 log_addr_type[CEC_MAX_LOG_ADDRS];
364
365 /* CEC 2.0 */
366 __u8 all_device_types[CEC_MAX_LOG_ADDRS];
367 __u8 features[CEC_MAX_LOG_ADDRS][12];
368};
369
370/* Allow a fallback to unregistered */
371#define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0)
372/* Passthrough RC messages to the input subsystem */
373#define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1)
374/* CDC-Only device: supports only CDC messages */
375#define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2)
376
377/* Events */
378
379/* Event that occurs when the adapter state changes */
380#define CEC_EVENT_STATE_CHANGE 1
381/*
382 * This event is sent when messages are lost because the application
383 * didn't empty the message queue in time
384 */
385#define CEC_EVENT_LOST_MSGS 2
386#define CEC_EVENT_PIN_CEC_LOW 3
387#define CEC_EVENT_PIN_CEC_HIGH 4
388#define CEC_EVENT_PIN_HPD_LOW 5
389#define CEC_EVENT_PIN_HPD_HIGH 6
390#define CEC_EVENT_PIN_5V_LOW 7
391#define CEC_EVENT_PIN_5V_HIGH 8
392
393#define CEC_EVENT_FL_INITIAL_STATE (1 << 0)
394#define CEC_EVENT_FL_DROPPED_EVENTS (1 << 1)
395
396/**
397 * struct cec_event_state_change - used when the CEC adapter changes state.
398 * @phys_addr: the current physical address
399 * @log_addr_mask: the current logical address mask
400 */
401struct cec_event_state_change {
402 __u16 phys_addr;
403 __u16 log_addr_mask;
404};
405
406/**
407 * struct cec_event_lost_msgs - tells you how many messages were lost.
408 * @lost_msgs: how many messages were lost.
409 */
410struct cec_event_lost_msgs {
411 __u32 lost_msgs;
412};
413
414/**
415 * struct cec_event - CEC event structure
416 * @ts: the timestamp of when the event was sent.
417 * @event: the event.
418 * array.
419 * @state_change: the event payload for CEC_EVENT_STATE_CHANGE.
420 * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS.
421 * @raw: array to pad the union.
422 */
423struct cec_event {
424 __u64 ts;
425 __u32 event;
426 __u32 flags;
427 union {
428 struct cec_event_state_change state_change;
429 struct cec_event_lost_msgs lost_msgs;
430 __u32 raw[16];
431 };
432};
433
434/* ioctls */
435
436/* Adapter capabilities */
437#define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps)
438
439/*
440 * phys_addr is either 0 (if this is the CEC root device)
441 * or a valid physical address obtained from the sink's EDID
442 * as read by this CEC device (if this is a source device)
443 * or a physical address obtained and modified from a sink
444 * EDID and used for a sink CEC device.
445 * If nothing is connected, then phys_addr is 0xffff.
446 * See HDMI 1.4b, section 8.7 (Physical Address).
447 *
448 * The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled
449 * internally.
450 */
451#define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16)
452#define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16)
453
454/*
455 * Configure the CEC adapter. It sets the device type and which
456 * logical types it will try to claim. It will return which
457 * logical addresses it could actually claim.
458 * An error is returned if the adapter is disabled or if there
459 * is no physical address assigned.
460 */
461
462#define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs)
463#define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs)
464
465/* Transmit/receive a CEC command */
466#define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg)
467#define CEC_RECEIVE _IOWR('a', 6, struct cec_msg)
468
469/* Dequeue CEC events */
470#define CEC_DQEVENT _IOWR('a', 7, struct cec_event)
471
472/*
473 * Get and set the message handling mode for this filehandle.
474 */
475#define CEC_G_MODE _IOR('a', 8, __u32)
476#define CEC_S_MODE _IOW('a', 9, __u32)
477
478/*
479 * The remainder of this header defines all CEC messages and operands.
480 * The format matters since it the cec-ctl utility parses it to generate
481 * code for implementing all these messages.
482 *
483 * Comments ending with 'Feature' group messages for each feature.
484 * If messages are part of multiple features, then the "Has also"
485 * comment is used to list the previously defined messages that are
486 * supported by the feature.
487 *
488 * Before operands are defined a comment is added that gives the
489 * name of the operand and in brackets the variable name of the
490 * corresponding argument in the cec-funcs.h function.
491 */
492
493/* Messages */
494
495/* One Touch Play Feature */
496#define CEC_MSG_ACTIVE_SOURCE 0x82
497#define CEC_MSG_IMAGE_VIEW_ON 0x04
498#define CEC_MSG_TEXT_VIEW_ON 0x0d
499
500
501/* Routing Control Feature */
502
503/*
504 * Has also:
505 * CEC_MSG_ACTIVE_SOURCE
506 */
507
508#define CEC_MSG_INACTIVE_SOURCE 0x9d
509#define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85
510#define CEC_MSG_ROUTING_CHANGE 0x80
511#define CEC_MSG_ROUTING_INFORMATION 0x81
512#define CEC_MSG_SET_STREAM_PATH 0x86
513
514
515/* Standby Feature */
516#define CEC_MSG_STANDBY 0x36
517
518
519/* One Touch Record Feature */
520#define CEC_MSG_RECORD_OFF 0x0b
521#define CEC_MSG_RECORD_ON 0x09
522/* Record Source Type Operand (rec_src_type) */
523#define CEC_OP_RECORD_SRC_OWN 1
524#define CEC_OP_RECORD_SRC_DIGITAL 2
525#define CEC_OP_RECORD_SRC_ANALOG 3
526#define CEC_OP_RECORD_SRC_EXT_PLUG 4
527#define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5
528/* Service Identification Method Operand (service_id_method) */
529#define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0
530#define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1
531/* Digital Service Broadcast System Operand (dig_bcast_system) */
532#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00
533#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01
534#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02
535#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08
536#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09
537#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a
538#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10
539#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11
540#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12
541#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18
542#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19
543#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a
544#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b
545/* Analogue Broadcast Type Operand (ana_bcast_type) */
546#define CEC_OP_ANA_BCAST_TYPE_CABLE 0
547#define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1
548#define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2
549/* Broadcast System Operand (bcast_system) */
550#define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00
551#define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */
552#define CEC_OP_BCAST_SYSTEM_PAL_M 0x02
553#define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03
554#define CEC_OP_BCAST_SYSTEM_PAL_I 0x04
555#define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05
556#define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06
557#define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07
558#define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08
559#define CEC_OP_BCAST_SYSTEM_OTHER 0x1f
560/* Channel Number Format Operand (channel_number_fmt) */
561#define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01
562#define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02
563
564#define CEC_MSG_RECORD_STATUS 0x0a
565/* Record Status Operand (rec_status) */
566#define CEC_OP_RECORD_STATUS_CUR_SRC 0x01
567#define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02
568#define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03
569#define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04
570#define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05
571#define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06
572#define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07
573#define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09
574#define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a
575#define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b
576#define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c
577#define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d
578#define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e
579#define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10
580#define CEC_OP_RECORD_STATUS_PLAYING 0x11
581#define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12
582#define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13
583#define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14
584#define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15
585#define CEC_OP_RECORD_STATUS_NO_SPACE 0x16
586#define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17
587#define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a
588#define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b
589#define CEC_OP_RECORD_STATUS_OTHER 0x1f
590
591#define CEC_MSG_RECORD_TV_SCREEN 0x0f
592
593
594/* Timer Programming Feature */
595#define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33
596/* Recording Sequence Operand (recording_seq) */
597#define CEC_OP_REC_SEQ_SUNDAY 0x01
598#define CEC_OP_REC_SEQ_MONDAY 0x02
599#define CEC_OP_REC_SEQ_TUESDAY 0x04
600#define CEC_OP_REC_SEQ_WEDNESDAY 0x08
601#define CEC_OP_REC_SEQ_THURSDAY 0x10
602#define CEC_OP_REC_SEQ_FRIDAY 0x20
603#define CEC_OP_REC_SEQ_SATERDAY 0x40
604#define CEC_OP_REC_SEQ_ONCE_ONLY 0x00
605
606#define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99
607
608#define CEC_MSG_CLEAR_EXT_TIMER 0xa1
609/* External Source Specifier Operand (ext_src_spec) */
610#define CEC_OP_EXT_SRC_PLUG 0x04
611#define CEC_OP_EXT_SRC_PHYS_ADDR 0x05
612
613#define CEC_MSG_SET_ANALOGUE_TIMER 0x34
614#define CEC_MSG_SET_DIGITAL_TIMER 0x97
615#define CEC_MSG_SET_EXT_TIMER 0xa2
616
617#define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67
618#define CEC_MSG_TIMER_CLEARED_STATUS 0x43
619/* Timer Cleared Status Data Operand (timer_cleared_status) */
620#define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00
621#define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01
622#define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02
623#define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80
624
625#define CEC_MSG_TIMER_STATUS 0x35
626/* Timer Overlap Warning Operand (timer_overlap_warning) */
627#define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0
628#define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1
629/* Media Info Operand (media_info) */
630#define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0
631#define CEC_OP_MEDIA_INFO_PROT_MEDIA 1
632#define CEC_OP_MEDIA_INFO_NO_MEDIA 2
633/* Programmed Indicator Operand (prog_indicator) */
634#define CEC_OP_PROG_IND_NOT_PROGRAMMED 0
635#define CEC_OP_PROG_IND_PROGRAMMED 1
636/* Programmed Info Operand (prog_info) */
637#define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08
638#define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09
639#define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b
640#define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a
641/* Not Programmed Error Info Operand (prog_error) */
642#define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01
643#define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02
644#define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03
645#define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04
646#define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05
647#define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06
648#define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07
649#define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08
650#define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09
651#define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a
652#define CEC_OP_PROG_ERROR_DUPLICATE 0x0e
653
654
655/* System Information Feature */
656#define CEC_MSG_CEC_VERSION 0x9e
657/* CEC Version Operand (cec_version) */
658#define CEC_OP_CEC_VERSION_1_3A 4
659#define CEC_OP_CEC_VERSION_1_4 5
660#define CEC_OP_CEC_VERSION_2_0 6
661
662#define CEC_MSG_GET_CEC_VERSION 0x9f
663#define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83
664#define CEC_MSG_GET_MENU_LANGUAGE 0x91
665#define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84
666/* Primary Device Type Operand (prim_devtype) */
667#define CEC_OP_PRIM_DEVTYPE_TV 0
668#define CEC_OP_PRIM_DEVTYPE_RECORD 1
669#define CEC_OP_PRIM_DEVTYPE_TUNER 3
670#define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4
671#define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5
672#define CEC_OP_PRIM_DEVTYPE_SWITCH 6
673#define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7
674
675#define CEC_MSG_SET_MENU_LANGUAGE 0x32
676#define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */
677/* All Device Types Operand (all_device_types) */
678#define CEC_OP_ALL_DEVTYPE_TV 0x80
679#define CEC_OP_ALL_DEVTYPE_RECORD 0x40
680#define CEC_OP_ALL_DEVTYPE_TUNER 0x20
681#define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10
682#define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08
683#define CEC_OP_ALL_DEVTYPE_SWITCH 0x04
684/*
685 * And if you wondering what happened to PROCESSOR devices: those should
686 * be mapped to a SWITCH.
687 */
688
689/* Valid for RC Profile and Device Feature operands */
690#define CEC_OP_FEAT_EXT 0x80 /* Extension bit */
691/* RC Profile Operand (rc_profile) */
692#define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00
693#define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02
694#define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06
695#define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a
696#define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e
697#define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50
698#define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48
699#define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44
700#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42
701#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41
702/* Device Feature Operand (dev_features) */
703#define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40
704#define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20
705#define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10
706#define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08
707#define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04
708#define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02
709
710#define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */
711
712
713/* Deck Control Feature */
714#define CEC_MSG_DECK_CONTROL 0x42
715/* Deck Control Mode Operand (deck_control_mode) */
716#define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1
717#define CEC_OP_DECK_CTL_MODE_SKIP_REV 2
718#define CEC_OP_DECK_CTL_MODE_STOP 3
719#define CEC_OP_DECK_CTL_MODE_EJECT 4
720
721#define CEC_MSG_DECK_STATUS 0x1b
722/* Deck Info Operand (deck_info) */
723#define CEC_OP_DECK_INFO_PLAY 0x11
724#define CEC_OP_DECK_INFO_RECORD 0x12
725#define CEC_OP_DECK_INFO_PLAY_REV 0x13
726#define CEC_OP_DECK_INFO_STILL 0x14
727#define CEC_OP_DECK_INFO_SLOW 0x15
728#define CEC_OP_DECK_INFO_SLOW_REV 0x16
729#define CEC_OP_DECK_INFO_FAST_FWD 0x17
730#define CEC_OP_DECK_INFO_FAST_REV 0x18
731#define CEC_OP_DECK_INFO_NO_MEDIA 0x19
732#define CEC_OP_DECK_INFO_STOP 0x1a
733#define CEC_OP_DECK_INFO_SKIP_FWD 0x1b
734#define CEC_OP_DECK_INFO_SKIP_REV 0x1c
735#define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d
736#define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e
737#define CEC_OP_DECK_INFO_OTHER 0x1f
738
739#define CEC_MSG_GIVE_DECK_STATUS 0x1a
740/* Status Request Operand (status_req) */
741#define CEC_OP_STATUS_REQ_ON 1
742#define CEC_OP_STATUS_REQ_OFF 2
743#define CEC_OP_STATUS_REQ_ONCE 3
744
745#define CEC_MSG_PLAY 0x41
746/* Play Mode Operand (play_mode) */
747#define CEC_OP_PLAY_MODE_PLAY_FWD 0x24
748#define CEC_OP_PLAY_MODE_PLAY_REV 0x20
749#define CEC_OP_PLAY_MODE_PLAY_STILL 0x25
750#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05
751#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06
752#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07
753#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09
754#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a
755#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b
756#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15
757#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16
758#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17
759#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19
760#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a
761#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b
762
763
764/* Tuner Control Feature */
765#define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08
766#define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92
767#define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93
768#define CEC_MSG_TUNER_DEVICE_STATUS 0x07
769/* Recording Flag Operand (rec_flag) */
770#define CEC_OP_REC_FLAG_USED 0
771#define CEC_OP_REC_FLAG_NOT_USED 1
772/* Tuner Display Info Operand (tuner_display_info) */
773#define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0
774#define CEC_OP_TUNER_DISPLAY_INFO_NONE 1
775#define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2
776
777#define CEC_MSG_TUNER_STEP_DECREMENT 0x06
778#define CEC_MSG_TUNER_STEP_INCREMENT 0x05
779
780
781/* Vendor Specific Commands Feature */
782
783/*
784 * Has also:
785 * CEC_MSG_CEC_VERSION
786 * CEC_MSG_GET_CEC_VERSION
787 */
788#define CEC_MSG_DEVICE_VENDOR_ID 0x87
789#define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c
790#define CEC_MSG_VENDOR_COMMAND 0x89
791#define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0
792#define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a
793#define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b
794
795
796/* OSD Display Feature */
797#define CEC_MSG_SET_OSD_STRING 0x64
798/* Display Control Operand (disp_ctl) */
799#define CEC_OP_DISP_CTL_DEFAULT 0x00
800#define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40
801#define CEC_OP_DISP_CTL_CLEAR 0x80
802
803
804/* Device OSD Transfer Feature */
805#define CEC_MSG_GIVE_OSD_NAME 0x46
806#define CEC_MSG_SET_OSD_NAME 0x47
807
808
809/* Device Menu Control Feature */
810#define CEC_MSG_MENU_REQUEST 0x8d
811/* Menu Request Type Operand (menu_req) */
812#define CEC_OP_MENU_REQUEST_ACTIVATE 0x00
813#define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01
814#define CEC_OP_MENU_REQUEST_QUERY 0x02
815
816#define CEC_MSG_MENU_STATUS 0x8e
817/* Menu State Operand (menu_state) */
818#define CEC_OP_MENU_STATE_ACTIVATED 0x00
819#define CEC_OP_MENU_STATE_DEACTIVATED 0x01
820
821#define CEC_MSG_USER_CONTROL_PRESSED 0x44
822/* UI Broadcast Type Operand (ui_bcast_type) */
823#define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00
824#define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01
825#define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10
826#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20
827#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30
828#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40
829#define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50
830#define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60
831#define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70
832#define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80
833#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90
834#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91
835#define CEC_OP_UI_BCAST_TYPE_IP 0xa0
836/* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */
837#define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10
838#define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20
839#define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80
840#define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90
841#define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0
842#define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1
843#define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2
844#define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3
845#define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1
846#define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2
847#define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3
848
849#define CEC_MSG_USER_CONTROL_RELEASED 0x45
850
851
852/* Remote Control Passthrough Feature */
853
854/*
855 * Has also:
856 * CEC_MSG_USER_CONTROL_PRESSED
857 * CEC_MSG_USER_CONTROL_RELEASED
858 */
859
860
861/* Power Status Feature */
862#define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f
863#define CEC_MSG_REPORT_POWER_STATUS 0x90
864/* Power Status Operand (pwr_state) */
865#define CEC_OP_POWER_STATUS_ON 0
866#define CEC_OP_POWER_STATUS_STANDBY 1
867#define CEC_OP_POWER_STATUS_TO_ON 2
868#define CEC_OP_POWER_STATUS_TO_STANDBY 3
869
870
871/* General Protocol Messages */
872#define CEC_MSG_FEATURE_ABORT 0x00
873/* Abort Reason Operand (reason) */
874#define CEC_OP_ABORT_UNRECOGNIZED_OP 0
875#define CEC_OP_ABORT_INCORRECT_MODE 1
876#define CEC_OP_ABORT_NO_SOURCE 2
877#define CEC_OP_ABORT_INVALID_OP 3
878#define CEC_OP_ABORT_REFUSED 4
879#define CEC_OP_ABORT_UNDETERMINED 5
880
881#define CEC_MSG_ABORT 0xff
882
883
884/* System Audio Control Feature */
885
886/*
887 * Has also:
888 * CEC_MSG_USER_CONTROL_PRESSED
889 * CEC_MSG_USER_CONTROL_RELEASED
890 */
891#define CEC_MSG_GIVE_AUDIO_STATUS 0x71
892#define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d
893#define CEC_MSG_REPORT_AUDIO_STATUS 0x7a
894/* Audio Mute Status Operand (aud_mute_status) */
895#define CEC_OP_AUD_MUTE_STATUS_OFF 0
896#define CEC_OP_AUD_MUTE_STATUS_ON 1
897
898#define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3
899#define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4
900#define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72
901/* System Audio Status Operand (sys_aud_status) */
902#define CEC_OP_SYS_AUD_STATUS_OFF 0
903#define CEC_OP_SYS_AUD_STATUS_ON 1
904
905#define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70
906#define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e
907/* Audio Format ID Operand (audio_format_id) */
908#define CEC_OP_AUD_FMT_ID_CEA861 0
909#define CEC_OP_AUD_FMT_ID_CEA861_CXT 1
910
911
912/* Audio Rate Control Feature */
913#define CEC_MSG_SET_AUDIO_RATE 0x9a
914/* Audio Rate Operand (audio_rate) */
915#define CEC_OP_AUD_RATE_OFF 0
916#define CEC_OP_AUD_RATE_WIDE_STD 1
917#define CEC_OP_AUD_RATE_WIDE_FAST 2
918#define CEC_OP_AUD_RATE_WIDE_SLOW 3
919#define CEC_OP_AUD_RATE_NARROW_STD 4
920#define CEC_OP_AUD_RATE_NARROW_FAST 5
921#define CEC_OP_AUD_RATE_NARROW_SLOW 6
922
923
924/* Audio Return Channel Control Feature */
925#define CEC_MSG_INITIATE_ARC 0xc0
926#define CEC_MSG_REPORT_ARC_INITIATED 0xc1
927#define CEC_MSG_REPORT_ARC_TERMINATED 0xc2
928#define CEC_MSG_REQUEST_ARC_INITIATION 0xc3
929#define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4
930#define CEC_MSG_TERMINATE_ARC 0xc5
931
932
933/* Dynamic Audio Lipsync Feature */
934/* Only for CEC 2.0 and up */
935#define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7
936#define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8
937/* Low Latency Mode Operand (low_latency_mode) */
938#define CEC_OP_LOW_LATENCY_MODE_OFF 0
939#define CEC_OP_LOW_LATENCY_MODE_ON 1
940/* Audio Output Compensated Operand (audio_out_compensated) */
941#define CEC_OP_AUD_OUT_COMPENSATED_NA 0
942#define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1
943#define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2
944#define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3
945
946
947/* Capability Discovery and Control Feature */
948#define CEC_MSG_CDC_MESSAGE 0xf8
949/* Ethernet-over-HDMI: nobody ever does this... */
950#define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00
951#define CEC_MSG_CDC_HEC_REPORT_STATE 0x01
952/* HEC Functionality State Operand (hec_func_state) */
953#define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0
954#define CEC_OP_HEC_FUNC_STATE_INACTIVE 1
955#define CEC_OP_HEC_FUNC_STATE_ACTIVE 2
956#define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3
957/* Host Functionality State Operand (host_func_state) */
958#define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0
959#define CEC_OP_HOST_FUNC_STATE_INACTIVE 1
960#define CEC_OP_HOST_FUNC_STATE_ACTIVE 2
961/* ENC Functionality State Operand (enc_func_state) */
962#define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0
963#define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1
964#define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2
965/* CDC Error Code Operand (cdc_errcode) */
966#define CEC_OP_CDC_ERROR_CODE_NONE 0
967#define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1
968#define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2
969#define CEC_OP_CDC_ERROR_CODE_OTHER 3
970/* HEC Support Operand (hec_support) */
971#define CEC_OP_HEC_SUPPORT_NO 0
972#define CEC_OP_HEC_SUPPORT_YES 1
973/* HEC Activation Operand (hec_activation) */
974#define CEC_OP_HEC_ACTIVATION_ON 0
975#define CEC_OP_HEC_ACTIVATION_OFF 1
976
977#define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02
978#define CEC_MSG_CDC_HEC_SET_STATE 0x03
979/* HEC Set State Operand (hec_set_state) */
980#define CEC_OP_HEC_SET_STATE_DEACTIVATE 0
981#define CEC_OP_HEC_SET_STATE_ACTIVATE 1
982
983#define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04
984#define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05
985#define CEC_MSG_CDC_HEC_DISCOVER 0x06
986/* Hotplug Detect messages */
987#define CEC_MSG_CDC_HPD_SET_STATE 0x10
988/* HPD State Operand (hpd_state) */
989#define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0
990#define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1
991#define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2
992#define CEC_OP_HPD_STATE_EDID_DISABLE 3
993#define CEC_OP_HPD_STATE_EDID_ENABLE 4
994#define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5
995#define CEC_MSG_CDC_HPD_REPORT_STATE 0x11
996/* HPD Error Code Operand (hpd_error) */
997#define CEC_OP_HPD_ERROR_NONE 0
998#define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1
999#define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2
1000#define CEC_OP_HPD_ERROR_OTHER 3
1001#define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4
1002
1003/* End of Messages */
1004
1005/* Helper functions to identify the 'special' CEC devices */
1006
1007static inline int cec_is_2nd_tv(const struct cec_log_addrs *las)
1008{
1009 /*
1010 * It is a second TV if the logical address is 14 or 15 and the
1011 * primary device type is a TV.
1012 */
1013 return las->num_log_addrs &&
1014 las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC &&
1015 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV;
1016}
1017
1018static inline int cec_is_processor(const struct cec_log_addrs *las)
1019{
1020 /*
1021 * It is a processor if the logical address is 12-15 and the
1022 * primary device type is a Processor.
1023 */
1024 return las->num_log_addrs &&
1025 las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 &&
1026 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR;
1027}
1028
1029static inline int cec_is_switch(const struct cec_log_addrs *las)
1030{
1031 /*
1032 * It is a switch if the logical address is 15 and the
1033 * primary device type is a Switch and the CDC-Only flag is not set.
1034 */
1035 return las->num_log_addrs == 1 &&
1036 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED &&
1037 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH &&
1038 !(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY);
1039}
1040
1041static inline int cec_is_cdc_only(const struct cec_log_addrs *las)
1042{
1043 /*
1044 * It is a CDC-only device if the logical address is 15 and the
1045 * primary device type is a Switch and the CDC-Only flag is set.
1046 */
1047 return las->num_log_addrs == 1 &&
1048 las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED &&
1049 las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH &&
1050 (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY);
1051}
1052
1053#endif