Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1#
2# PHY Layer Configuration
3#
4
5menuconfig MDIO_DEVICE
6 tristate "MDIO bus device drivers"
7 help
8 MDIO devices and driver infrastructure code.
9
10config MDIO_BUS
11 tristate
12 default m if PHYLIB=m
13 default MDIO_DEVICE
14 help
15 This internal symbol is used for link time dependencies and it
16 reflects whether the mdio_bus/mdio_device code is built as a
17 loadable module or built-in.
18
19if MDIO_BUS
20
21config MDIO_BCM_IPROC
22 tristate "Broadcom iProc MDIO bus controller"
23 depends on ARCH_BCM_IPROC || COMPILE_TEST
24 depends on HAS_IOMEM && OF_MDIO
25 help
26 This module provides a driver for the MDIO busses found in the
27 Broadcom iProc SoC's.
28
29config MDIO_BCM_UNIMAC
30 tristate "Broadcom UniMAC MDIO bus controller"
31 depends on HAS_IOMEM && OF_MDIO
32 help
33 This module provides a driver for the Broadcom UniMAC MDIO busses.
34 This hardware can be found in the Broadcom GENET Ethernet MAC
35 controllers as well as some Broadcom Ethernet switches such as the
36 Starfighter 2 switches.
37
38config MDIO_BITBANG
39 tristate "Bitbanged MDIO buses"
40 help
41 This module implements the MDIO bus protocol in software,
42 for use by low level drivers that export the ability to
43 drive the relevant pins.
44
45 If in doubt, say N.
46
47config MDIO_BUS_MUX
48 tristate
49 depends on OF_MDIO
50 help
51 This module provides a driver framework for MDIO bus
52 multiplexers which connect one of several child MDIO busses
53 to a parent bus. Switching between child busses is done by
54 device specific drivers.
55
56config MDIO_BUS_MUX_BCM_IPROC
57 tristate "Broadcom iProc based MDIO bus multiplexers"
58 depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
59 select MDIO_BUS_MUX
60 default ARCH_BCM_IPROC
61 help
62 This module provides a driver for MDIO bus multiplexers found in
63 iProc based Broadcom SoCs. This multiplexer connects one of several
64 child MDIO bus to a parent bus. Buses could be internal as well as
65 external and selection logic lies inside the same multiplexer.
66
67config MDIO_BUS_MUX_GPIO
68 tristate "GPIO controlled MDIO bus multiplexers"
69 depends on OF_GPIO && OF_MDIO
70 select MDIO_BUS_MUX
71 help
72 This module provides a driver for MDIO bus multiplexers that
73 are controlled via GPIO lines. The multiplexer connects one of
74 several child MDIO busses to a parent bus. Child bus
75 selection is under the control of GPIO lines.
76
77config MDIO_BUS_MUX_MMIOREG
78 tristate "MMIO device-controlled MDIO bus multiplexers"
79 depends on OF_MDIO && HAS_IOMEM
80 select MDIO_BUS_MUX
81 help
82 This module provides a driver for MDIO bus multiplexers that
83 are controlled via a simple memory-mapped device, like an FPGA.
84 The multiplexer connects one of several child MDIO busses to a
85 parent bus. Child bus selection is under the control of one of
86 the FPGA's registers.
87
88 Currently, only 8/16/32 bits registers are supported.
89
90config MDIO_CAVIUM
91 tristate
92
93config MDIO_GPIO
94 tristate "GPIO lib-based bitbanged MDIO buses"
95 depends on MDIO_BITBANG && GPIOLIB
96 ---help---
97 Supports GPIO lib-based MDIO busses.
98
99 To compile this driver as a module, choose M here: the module
100 will be called mdio-gpio.
101
102config MDIO_HISI_FEMAC
103 tristate "Hisilicon FEMAC MDIO bus controller"
104 depends on HAS_IOMEM && OF_MDIO
105 help
106 This module provides a driver for the MDIO busses found in the
107 Hisilicon SoC that have an Fast Ethernet MAC.
108
109config MDIO_I2C
110 tristate
111 depends on I2C
112 help
113 Support I2C based PHYs. This provides a MDIO bus bridged
114 to I2C to allow PHYs connected in I2C mode to be accessed
115 using the existing infrastructure.
116
117 This is library mode.
118
119config MDIO_MOXART
120 tristate "MOXA ART MDIO interface support"
121 depends on ARCH_MOXART || COMPILE_TEST
122 help
123 This driver supports the MDIO interface found in the network
124 interface units of the MOXA ART SoC
125
126config MDIO_MSCC_MIIM
127 tristate "Microsemi MIIM interface support"
128 depends on HAS_IOMEM
129 help
130 This driver supports the MIIM (MDIO) interface found in the network
131 switches of the Microsemi SoCs
132
133config MDIO_OCTEON
134 tristate "Octeon and some ThunderX SOCs MDIO buses"
135 depends on 64BIT
136 depends on HAS_IOMEM && OF_MDIO
137 select MDIO_CAVIUM
138 help
139 This module provides a driver for the Octeon and ThunderX MDIO
140 buses. It is required by the Octeon and ThunderX ethernet device
141 drivers on some systems.
142
143config MDIO_SUN4I
144 tristate "Allwinner sun4i MDIO interface support"
145 depends on ARCH_SUNXI || COMPILE_TEST
146 help
147 This driver supports the MDIO interface found in the network
148 interface units of the Allwinner SoC that have an EMAC (A10,
149 A12, A10s, etc.)
150
151config MDIO_THUNDER
152 tristate "ThunderX SOCs MDIO buses"
153 depends on 64BIT
154 depends on PCI
155 select MDIO_CAVIUM
156 help
157 This driver supports the MDIO interfaces found on Cavium
158 ThunderX SoCs when the MDIO bus device appears as a PCI
159 device.
160
161config MDIO_XGENE
162 tristate "APM X-Gene SoC MDIO bus controller"
163 depends on ARCH_XGENE || COMPILE_TEST
164 help
165 This module provides a driver for the MDIO busses found in the
166 APM X-Gene SoC's.
167
168endif
169
170config PHYLINK
171 tristate
172 depends on NETDEVICES
173 select PHYLIB
174 select SWPHY
175 help
176 PHYlink models the link between the PHY and MAC, allowing fixed
177 configuration links, PHYs, and Serdes links with MAC level
178 autonegotiation modes.
179
180menuconfig PHYLIB
181 tristate "PHY Device support and infrastructure"
182 depends on NETDEVICES
183 select MDIO_DEVICE
184 help
185 Ethernet controllers are usually attached to PHY
186 devices. This option provides infrastructure for
187 managing PHY devices.
188
189if PHYLIB
190
191config SWPHY
192 bool
193
194config LED_TRIGGER_PHY
195 bool "Support LED triggers for tracking link state"
196 depends on LEDS_TRIGGERS
197 ---help---
198 Adds support for a set of LED trigger events per-PHY. Link
199 state change will trigger the events, for consumption by an
200 LED class driver. There are triggers for each link speed currently
201 supported by the PHY and also a one common "link" trigger as a
202 logical-or of all the link speed ones.
203 All these triggers are named according to the following pattern:
204 <mii bus id>:<phy>:<speed>
205
206 Where speed is in the form:
207 <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
208 for any speed known to the PHY.
209
210
211comment "MII PHY device drivers"
212
213config SFP
214 tristate "SFP cage support"
215 depends on I2C && PHYLINK
216 select MDIO_I2C
217
218config AMD_PHY
219 tristate "AMD PHYs"
220 ---help---
221 Currently supports the am79c874
222
223config AQUANTIA_PHY
224 tristate "Aquantia PHYs"
225 ---help---
226 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
227
228config ASIX_PHY
229 tristate "Asix PHYs"
230 help
231 Currently supports the Asix Electronics PHY found in the X-Surf 100
232 AX88796B package.
233
234config AT803X_PHY
235 tristate "AT803X PHYs"
236 ---help---
237 Currently supports the AT8030 and AT8035 model
238
239config BCM63XX_PHY
240 tristate "Broadcom 63xx SOCs internal PHY"
241 depends on BCM63XX
242 select BCM_NET_PHYLIB
243 ---help---
244 Currently supports the 6348 and 6358 PHYs.
245
246config BCM7XXX_PHY
247 tristate "Broadcom 7xxx SOCs internal PHYs"
248 select BCM_NET_PHYLIB
249 ---help---
250 Currently supports the BCM7366, BCM7439, BCM7445, and
251 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
252
253config BCM87XX_PHY
254 tristate "Broadcom BCM8706 and BCM8727 PHYs"
255 help
256 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
257
258config BCM_CYGNUS_PHY
259 tristate "Broadcom Cygnus SoC internal PHY"
260 depends on ARCH_BCM_CYGNUS || COMPILE_TEST
261 depends on MDIO_BCM_IPROC
262 select BCM_NET_PHYLIB
263 ---help---
264 This PHY driver is for the 1G internal PHYs of the Broadcom
265 Cygnus Family SoC.
266
267 Currently supports internal PHY's used in the BCM11300,
268 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
269 BCM58303 & BCM58305 Broadcom Cygnus SoCs.
270
271config BCM_NET_PHYLIB
272 tristate
273
274config BROADCOM_PHY
275 tristate "Broadcom PHYs"
276 select BCM_NET_PHYLIB
277 ---help---
278 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
279 BCM5481, BCM54810 and BCM5482 PHYs.
280
281config CICADA_PHY
282 tristate "Cicada PHYs"
283 ---help---
284 Currently supports the cis8204
285
286config CORTINA_PHY
287 tristate "Cortina EDC CDR 10G Ethernet PHY"
288 ---help---
289 Currently supports the CS4340 phy.
290
291config DAVICOM_PHY
292 tristate "Davicom PHYs"
293 ---help---
294 Currently supports dm9161e and dm9131
295
296config DP83822_PHY
297 tristate "Texas Instruments DP83822 PHY"
298 ---help---
299 Supports the DP83822 PHY.
300
301config DP83TC811_PHY
302 tristate "Texas Instruments DP83TC822 PHY"
303 ---help---
304 Supports the DP83TC822 PHY.
305
306config DP83848_PHY
307 tristate "Texas Instruments DP83848 PHY"
308 ---help---
309 Supports the DP83848 PHY.
310
311config DP83867_PHY
312 tristate "Texas Instruments DP83867 Gigabit PHY"
313 ---help---
314 Currently supports the DP83867 PHY.
315
316config FIXED_PHY
317 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
318 depends on PHYLIB
319 select SWPHY
320 ---help---
321 Adds the platform "fixed" MDIO Bus to cover the boards that use
322 PHYs that are not connected to the real MDIO bus.
323
324 Currently tested with mpc866ads and mpc8349e-mitx.
325
326config ICPLUS_PHY
327 tristate "ICPlus PHYs"
328 ---help---
329 Currently supports the IP175C and IP1001 PHYs.
330
331config INTEL_XWAY_PHY
332 tristate "Intel XWAY PHYs"
333 ---help---
334 Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
335 These PHYs are marked as standalone chips under the names
336 PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
337 SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
338
339config LSI_ET1011C_PHY
340 tristate "LSI ET1011C PHY"
341 ---help---
342 Supports the LSI ET1011C PHY.
343
344config LXT_PHY
345 tristate "Intel LXT PHYs"
346 ---help---
347 Currently supports the lxt970, lxt971
348
349config MARVELL_PHY
350 tristate "Marvell PHYs"
351 ---help---
352 Currently has a driver for the 88E1011S
353
354config MARVELL_10G_PHY
355 tristate "Marvell Alaska 10Gbit PHYs"
356 ---help---
357 Support for the Marvell Alaska MV88X3310 and compatible PHYs.
358
359config MESON_GXL_PHY
360 tristate "Amlogic Meson GXL Internal PHY"
361 depends on ARCH_MESON || COMPILE_TEST
362 ---help---
363 Currently has a driver for the Amlogic Meson GXL Internal PHY
364
365config MICREL_PHY
366 tristate "Micrel PHYs"
367 ---help---
368 Supports the KSZ9021, VSC8201, KS8001 PHYs.
369
370config MICROCHIP_PHY
371 tristate "Microchip PHYs"
372 help
373 Supports the LAN88XX PHYs.
374
375config MICROCHIP_T1_PHY
376 tristate "Microchip T1 PHYs"
377 ---help---
378 Supports the LAN87XX PHYs.
379
380config MICROSEMI_PHY
381 tristate "Microsemi PHYs"
382 ---help---
383 Currently supports VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
384
385config NATIONAL_PHY
386 tristate "National Semiconductor PHYs"
387 ---help---
388 Currently supports the DP83865 PHY.
389
390config QSEMI_PHY
391 tristate "Quality Semiconductor PHYs"
392 ---help---
393 Currently supports the qs6612
394
395config REALTEK_PHY
396 tristate "Realtek PHYs"
397 ---help---
398 Supports the Realtek 821x PHY.
399
400config RENESAS_PHY
401 tristate "Driver for Renesas PHYs"
402 ---help---
403 Supports the Renesas PHYs uPD60620 and uPD60620A.
404
405config ROCKCHIP_PHY
406 tristate "Driver for Rockchip Ethernet PHYs"
407 ---help---
408 Currently supports the integrated Ethernet PHY.
409
410config SMSC_PHY
411 tristate "SMSC PHYs"
412 ---help---
413 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
414
415config STE10XP
416 tristate "STMicroelectronics STe10Xp PHYs"
417 ---help---
418 This is the driver for the STe100p and STe101p PHYs.
419
420config TERANETICS_PHY
421 tristate "Teranetics PHYs"
422 ---help---
423 Currently supports the Teranetics TN2020
424
425config VITESSE_PHY
426 tristate "Vitesse PHYs"
427 ---help---
428 Currently supports the vsc8244
429
430config XILINX_GMII2RGMII
431 tristate "Xilinx GMII2RGMII converter driver"
432 ---help---
433 This driver support xilinx GMII to RGMII IP core it provides
434 the Reduced Gigabit Media Independent Interface(RGMII) between
435 Ethernet physical media devices and the Gigabit Ethernet controller.
436
437endif # PHYLIB
438
439config MICREL_KS8995MA
440 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
441 depends on SPI