Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/*
2 * core.h
3 *
4 * copyright (c) 2011 Samsung Electronics Co., Ltd
5 * http://www.samsung.com
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 */
13
14#ifndef __LINUX_MFD_SEC_CORE_H
15#define __LINUX_MFD_SEC_CORE_H
16
17/* Macros to represent minimum voltages for LDO/BUCK */
18#define MIN_3000_MV 3000000
19#define MIN_2500_MV 2500000
20#define MIN_2000_MV 2000000
21#define MIN_1800_MV 1800000
22#define MIN_1500_MV 1500000
23#define MIN_1400_MV 1400000
24#define MIN_1000_MV 1000000
25
26#define MIN_900_MV 900000
27#define MIN_850_MV 850000
28#define MIN_800_MV 800000
29#define MIN_750_MV 750000
30#define MIN_600_MV 600000
31#define MIN_500_MV 500000
32
33/* Ramp delay in uV/us */
34#define RAMP_DELAY_12_MVUS 12000
35
36/* Macros to represent steps for LDO/BUCK */
37#define STEP_50_MV 50000
38#define STEP_25_MV 25000
39#define STEP_12_5_MV 12500
40#define STEP_6_25_MV 6250
41
42struct gpio_desc;
43
44enum sec_device_type {
45 S5M8751X,
46 S5M8763X,
47 S5M8767X,
48 S2MPA01,
49 S2MPS11X,
50 S2MPS13X,
51 S2MPS14X,
52 S2MPS15X,
53 S2MPU02,
54};
55
56/**
57 * struct sec_pmic_dev - s2m/s5m master device for sub-drivers
58 * @dev: Master device of the chip
59 * @pdata: Platform data populated with data from DTS
60 * or board files
61 * @regmap_pmic: Regmap associated with PMIC's I2C address
62 * @i2c: I2C client of the main driver
63 * @device_type: Type of device, matches enum sec_device_type
64 * @irq_base: Base IRQ number for device, required for IRQs
65 * @irq: Generic IRQ number for device
66 * @irq_data: Runtime data structure for IRQ controller
67 * @wakeup: Whether or not this is a wakeup device
68 */
69struct sec_pmic_dev {
70 struct device *dev;
71 struct sec_platform_data *pdata;
72 struct regmap *regmap_pmic;
73 struct i2c_client *i2c;
74
75 unsigned long device_type;
76 int irq_base;
77 int irq;
78 struct regmap_irq_chip_data *irq_data;
79
80 bool wakeup;
81};
82
83int sec_irq_init(struct sec_pmic_dev *sec_pmic);
84void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
85int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
86
87struct sec_platform_data {
88 struct sec_regulator_data *regulators;
89 struct sec_opmode_data *opmode;
90 int device_type;
91 int num_regulators;
92
93 int irq_base;
94 int (*cfg_pmic_irq)(void);
95
96 bool wakeup;
97 bool buck_voltage_lock;
98
99 int buck_gpios[3];
100 int buck_ds[3];
101 unsigned int buck2_voltage[8];
102 bool buck2_gpiodvs;
103 unsigned int buck3_voltage[8];
104 bool buck3_gpiodvs;
105 unsigned int buck4_voltage[8];
106 bool buck4_gpiodvs;
107
108 int buck_set1;
109 int buck_set2;
110 int buck_set3;
111 int buck2_enable;
112 int buck3_enable;
113 int buck4_enable;
114 int buck_default_idx;
115 int buck2_default_idx;
116 int buck3_default_idx;
117 int buck4_default_idx;
118
119 int buck_ramp_delay;
120
121 int buck2_ramp_delay;
122 int buck34_ramp_delay;
123 int buck5_ramp_delay;
124 int buck16_ramp_delay;
125 int buck7810_ramp_delay;
126 int buck9_ramp_delay;
127 int buck24_ramp_delay;
128 int buck3_ramp_delay;
129 int buck7_ramp_delay;
130 int buck8910_ramp_delay;
131
132 bool buck1_ramp_enable;
133 bool buck2_ramp_enable;
134 bool buck3_ramp_enable;
135 bool buck4_ramp_enable;
136 bool buck6_ramp_enable;
137
138 int buck2_init;
139 int buck3_init;
140 int buck4_init;
141 /* Whether or not manually set PWRHOLD to low during shutdown. */
142 bool manual_poweroff;
143 /* Disable the WRSTBI (buck voltage warm reset) when probing? */
144 bool disable_wrstbi;
145};
146
147/**
148 * sec_regulator_data - regulator data
149 * @id: regulator id
150 * @initdata: regulator init data (contraints, supplies, ...)
151 */
152struct sec_regulator_data {
153 int id;
154 struct regulator_init_data *initdata;
155 struct device_node *reg_node;
156 struct gpio_desc *ext_control_gpiod;
157};
158
159/*
160 * sec_opmode_data - regulator operation mode data
161 * @id: regulator id
162 * @mode: regulator operation mode
163 */
164struct sec_opmode_data {
165 int id;
166 unsigned int mode;
167};
168
169/*
170 * samsung regulator operation mode
171 * SEC_OPMODE_OFF Regulator always OFF
172 * SEC_OPMODE_ON Regulator always ON
173 * SEC_OPMODE_LOWPOWER Regulator is on in low-power mode
174 * SEC_OPMODE_SUSPEND Regulator is changed by PWREN pin
175 * If PWREN is high, regulator is on
176 * If PWREN is low, regulator is off
177 */
178
179enum sec_opmode {
180 SEC_OPMODE_OFF,
181 SEC_OPMODE_ON,
182 SEC_OPMODE_LOWPOWER,
183 SEC_OPMODE_SUSPEND,
184};
185
186#endif /* __LINUX_MFD_SEC_CORE_H */