Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1config LEDS_GPIO_REGISTER
2 bool
3 help
4 This option provides the function gpio_led_register_device.
5 As this function is used by arch code it must not be compiled as a
6 module.
7
8menuconfig NEW_LEDS
9 bool "LED Support"
10 help
11 Say Y to enable Linux LED support. This allows control of supported
12 LEDs from both userspace and optionally, by kernel events (triggers).
13
14if NEW_LEDS
15
16config LEDS_CLASS
17 tristate "LED Class Support"
18 help
19 This option enables the led sysfs class in /sys/class/leds. You'll
20 need this to do anything useful with LEDs. If unsure, say N.
21
22config LEDS_CLASS_FLASH
23 tristate "LED Flash Class Support"
24 depends on LEDS_CLASS
25 help
26 This option enables the flash led sysfs class in /sys/class/leds.
27 It wrapps LED Class and adds flash LEDs specific sysfs attributes
28 and kernel internal API to it. You'll need this to provide support
29 for the flash related features of a LED device. It can be built
30 as a module.
31
32config LEDS_BRIGHTNESS_HW_CHANGED
33 bool "LED Class brightness_hw_changed attribute support"
34 depends on LEDS_CLASS
35 help
36 This option enables support for the brightness_hw_changed attribute
37 for led sysfs class devices under /sys/class/leds.
38
39 See Documentation/ABI/testing/sysfs-class-led for details.
40
41comment "LED drivers"
42
43config LEDS_88PM860X
44 tristate "LED Support for Marvell 88PM860x PMIC"
45 depends on LEDS_CLASS
46 depends on MFD_88PM860X
47 help
48 This option enables support for on-chip LED drivers found on Marvell
49 Semiconductor 88PM8606 PMIC.
50
51config LEDS_AAT1290
52 tristate "LED support for the AAT1290"
53 depends on LEDS_CLASS_FLASH
54 depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
55 depends on GPIOLIB || COMPILE_TEST
56 depends on OF
57 depends on PINCTRL
58 help
59 This option enables support for the LEDs on the AAT1290.
60config LEDS_APU
61 tristate "Front panel LED support for PC Engines APU/APU2 boards"
62 depends on LEDS_CLASS
63 depends on X86 && DMI
64 help
65 This driver makes the PC Engines APU/APU2 front panel LEDs
66 accessible from userspace programs through the LED subsystem.
67
68 To compile this driver as a module, choose M here: the
69 module will be called leds-apu.
70
71config LEDS_AS3645A
72 tristate "AS3645A and LM3555 LED flash controllers support"
73 depends on I2C && LEDS_CLASS_FLASH
74 depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
75 help
76 Enable LED flash class support for AS3645A LED flash
77 controller. V4L2 flash API is provided as well if
78 CONFIG_V4L2_FLASH_API is enabled.
79
80config LEDS_BCM6328
81 tristate "LED Support for Broadcom BCM6328"
82 depends on LEDS_CLASS
83 depends on HAS_IOMEM
84 depends on OF
85 help
86 This option enables support for LEDs connected to the BCM6328
87 LED HW controller accessed via MMIO registers.
88
89config LEDS_BCM6358
90 tristate "LED Support for Broadcom BCM6358"
91 depends on LEDS_CLASS
92 depends on HAS_IOMEM
93 depends on OF
94 help
95 This option enables support for LEDs connected to the BCM6358
96 LED HW controller accessed via MMIO registers.
97
98config LEDS_CPCAP
99 tristate "LED Support for Motorola CPCAP"
100 depends on LEDS_CLASS
101 depends on MFD_CPCAP
102 depends on OF
103 help
104 This option enables support for LEDs offered by Motorola's
105 CPCAP PMIC.
106
107config LEDS_CR0014114
108 tristate "LED Support for Crane CR0014114"
109 depends on LEDS_CLASS
110 depends on SPI
111 depends on OF
112 help
113 This option enables support for CR0014114 LED Board which
114 is widely used in vending machines produced by
115 Crane Merchandising Systems.
116
117 To compile this driver as a module, choose M here: the module
118 will be called leds-cr0014114.
119
120config LEDS_LM3530
121 tristate "LCD Backlight driver for LM3530"
122 depends on LEDS_CLASS
123 depends on I2C
124 help
125 This option enables support for the LCD backlight using
126 LM3530 ambient light sensor chip. This ALS chip can be
127 controlled manually or using PWM input or using ambient
128 light automatically.
129
130config LEDS_LM3533
131 tristate "LED support for LM3533"
132 depends on LEDS_CLASS
133 depends on MFD_LM3533
134 help
135 This option enables support for the LEDs on National Semiconductor /
136 TI LM3533 Lighting Power chips.
137
138 The LEDs can be controlled directly, through PWM input, or by the
139 ambient-light-sensor interface. The chip supports
140 hardware-accelerated blinking with maximum on and off periods of 9.8
141 and 77 seconds respectively.
142
143config LEDS_LM3642
144 tristate "LED support for LM3642 Chip"
145 depends on LEDS_CLASS && I2C
146 select REGMAP_I2C
147 help
148 This option enables support for LEDs connected to LM3642.
149 The LM3642 is a 4MHz fixed-frequency synchronous boost
150 converter plus 1.5A constant current driver for a high-current
151 white LED.
152
153config LEDS_LM3692X
154 tristate "LED support for LM3692x Chips"
155 depends on LEDS_CLASS && I2C && OF
156 select REGMAP_I2C
157 help
158 This option enables support for the TI LM3692x family
159 of white LED string drivers used for backlighting.
160
161config LEDS_LM3601X
162 tristate "LED support for LM3601x Chips"
163 depends on LEDS_CLASS && I2C
164 depends on LEDS_CLASS_FLASH
165 select REGMAP_I2C
166 help
167 This option enables support for the TI LM3601x family
168 of flash, torch and indicator classes.
169
170config LEDS_LOCOMO
171 tristate "LED Support for Locomo device"
172 depends on LEDS_CLASS
173 depends on SHARP_LOCOMO
174 help
175 This option enables support for the LEDs on Sharp Locomo.
176 Zaurus models SL-5500 and SL-5600.
177
178config LEDS_MIKROTIK_RB532
179 tristate "LED Support for Mikrotik Routerboard 532"
180 depends on LEDS_CLASS
181 depends on MIKROTIK_RB532
182 help
183 This option enables support for the so called "User LED" of
184 Mikrotik's Routerboard 532.
185
186config LEDS_MT6323
187 tristate "LED Support for Mediatek MT6323 PMIC"
188 depends on LEDS_CLASS
189 depends on MFD_MT6397
190 help
191 This option enables support for on-chip LED drivers found on
192 Mediatek MT6323 PMIC.
193
194config LEDS_S3C24XX
195 tristate "LED Support for Samsung S3C24XX GPIO LEDs"
196 depends on LEDS_CLASS
197 depends on ARCH_S3C24XX
198 help
199 This option enables support for LEDs connected to GPIO lines
200 on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
201
202config LEDS_NET48XX
203 tristate "LED Support for Soekris net48xx series Error LED"
204 depends on LEDS_CLASS
205 depends on SCx200_GPIO
206 help
207 This option enables support for the Soekris net4801 and net4826 error
208 LED.
209
210config LEDS_FSG
211 tristate "LED Support for the Freecom FSG-3"
212 depends on LEDS_CLASS
213 depends on MACH_FSG
214 help
215 This option enables support for the LEDs on the Freecom FSG-3.
216
217config LEDS_WRAP
218 tristate "LED Support for the WRAP series LEDs"
219 depends on LEDS_CLASS
220 depends on SCx200_GPIO
221 help
222 This option enables support for the PCEngines WRAP programmable LEDs.
223
224config LEDS_COBALT_QUBE
225 tristate "LED Support for the Cobalt Qube series front LED"
226 depends on LEDS_CLASS
227 depends on MIPS_COBALT
228 help
229 This option enables support for the front LED on Cobalt Qube series
230
231config LEDS_COBALT_RAQ
232 bool "LED Support for the Cobalt Raq series"
233 depends on LEDS_CLASS=y && MIPS_COBALT
234 select LEDS_TRIGGERS
235 help
236 This option enables support for the Cobalt Raq series LEDs.
237
238config LEDS_SUNFIRE
239 tristate "LED support for SunFire servers."
240 depends on LEDS_CLASS
241 depends on SPARC64
242 select LEDS_TRIGGERS
243 help
244 This option enables support for the Left, Middle, and Right
245 LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
246
247config LEDS_IPAQ_MICRO
248 tristate "LED Support for the Compaq iPAQ h3xxx"
249 depends on LEDS_CLASS
250 depends on MFD_IPAQ_MICRO
251 help
252 Choose this option if you want to use the notification LED on
253 Compaq/HP iPAQ h3100 and h3600.
254
255config LEDS_HP6XX
256 tristate "LED Support for the HP Jornada 6xx"
257 depends on LEDS_CLASS
258 depends on SH_HP6XX
259 help
260 This option enables LED support for the handheld
261 HP Jornada 620/660/680/690.
262
263config LEDS_PCA9532
264 tristate "LED driver for PCA9532 dimmer"
265 depends on LEDS_CLASS
266 depends on I2C && INPUT
267 help
268 This option enables support for NXP pca9532
269 LED controller. It is generally only useful
270 as a platform driver
271
272config LEDS_PCA9532_GPIO
273 bool "Enable GPIO support for PCA9532"
274 depends on LEDS_PCA9532
275 depends on GPIOLIB
276 help
277 Allow unused pins on PCA9532 to be used as gpio.
278
279 To use a pin as gpio pca9532_type in pca9532_platform data needs to
280 set to PCA9532_TYPE_GPIO.
281
282config LEDS_GPIO
283 tristate "LED Support for GPIO connected LEDs"
284 depends on LEDS_CLASS
285 depends on GPIOLIB || COMPILE_TEST
286 help
287 This option enables support for the LEDs connected to GPIO
288 outputs. To be useful the particular board must have LEDs
289 and they must be connected to the GPIO lines. The LEDs must be
290 defined as platform devices and/or OpenFirmware platform devices.
291 The code to use these bindings can be selected below.
292
293config LEDS_LP3944
294 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
295 depends on LEDS_CLASS
296 depends on I2C
297 help
298 This option enables support for LEDs connected to the National
299 Semiconductor LP3944 Lighting Management Unit (LMU) also known as
300 Fun Light Chip.
301
302 To compile this driver as a module, choose M here: the
303 module will be called leds-lp3944.
304
305config LEDS_LP3952
306 tristate "LED Support for TI LP3952 2 channel LED driver"
307 depends on LEDS_CLASS
308 depends on I2C
309 depends on GPIOLIB
310 select REGMAP_I2C
311 help
312 This option enables support for LEDs connected to the Texas
313 Instruments LP3952 LED driver.
314
315 To compile this driver as a module, choose M here: the
316 module will be called leds-lp3952.
317
318config LEDS_LP55XX_COMMON
319 tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
320 depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
321 select FW_LOADER
322 select FW_LOADER_USER_HELPER
323 help
324 This option supports common operations for LP5521/5523/55231/5562/8501
325 devices.
326
327config LEDS_LP5521
328 tristate "LED Support for N.S. LP5521 LED driver chip"
329 depends on LEDS_CLASS && I2C
330 select LEDS_LP55XX_COMMON
331 help
332 If you say yes here you get support for the National Semiconductor
333 LP5521 LED driver. It is 3 channel chip with programmable engines.
334 Driver provides direct control via LED class and interface for
335 programming the engines.
336
337config LEDS_LP5523
338 tristate "LED Support for TI/National LP5523/55231 LED driver chip"
339 depends on LEDS_CLASS && I2C
340 select LEDS_LP55XX_COMMON
341 help
342 If you say yes here you get support for TI/National Semiconductor
343 LP5523/55231 LED driver.
344 It is 9 channel chip with programmable engines.
345 Driver provides direct control via LED class and interface for
346 programming the engines.
347
348config LEDS_LP5562
349 tristate "LED Support for TI LP5562 LED driver chip"
350 depends on LEDS_CLASS && I2C
351 select LEDS_LP55XX_COMMON
352 help
353 If you say yes here you get support for TI LP5562 LED driver.
354 It is 4 channels chip with programmable engines.
355 Driver provides direct control via LED class and interface for
356 programming the engines.
357
358config LEDS_LP8501
359 tristate "LED Support for TI LP8501 LED driver chip"
360 depends on LEDS_CLASS && I2C
361 select LEDS_LP55XX_COMMON
362 help
363 If you say yes here you get support for TI LP8501 LED driver.
364 It is 9 channel chip with programmable engines.
365 Driver provides direct control via LED class and interface for
366 programming the engines.
367 It is similar as LP5523, but output power selection is available.
368 And register layout and engine program schemes are different.
369
370config LEDS_LP8788
371 tristate "LED support for the TI LP8788 PMIC"
372 depends on LEDS_CLASS
373 depends on MFD_LP8788
374 help
375 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
376
377config LEDS_LP8860
378 tristate "LED support for the TI LP8860 4 channel LED driver"
379 depends on LEDS_CLASS && I2C && OF
380 select REGMAP_I2C
381 help
382 If you say yes here you get support for the TI LP8860 4 channel
383 LED driver.
384 This option enables support for the display cluster LEDs
385 on the LP8860 4 channel LED driver using the I2C communication
386 bus.
387
388config LEDS_CLEVO_MAIL
389 tristate "Mail LED on Clevo notebook"
390 depends on LEDS_CLASS
391 depends on X86 && SERIO_I8042 && DMI
392 help
393 This driver makes the mail LED accessible from userspace
394 programs through the leds subsystem. This LED have three
395 known mode: off, blink at 0.5Hz and blink at 1Hz.
396
397 The driver supports two kinds of interface: using ledtrig-timer
398 or through /sys/class/leds/clevo::mail/brightness. As this LED
399 cannot change it's brightness it blinks instead. The brightness
400 value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
401 blink at 1Hz.
402
403 This module can drive the mail LED for the following notebooks:
404
405 Clevo D400P
406 Clevo D410J
407 Clevo D410V
408 Clevo D400V/D470V (not tested, but might work)
409 Clevo M540N
410 Clevo M5x0N (not tested, but might work)
411 Positivo Mobile (Clevo M5x0V)
412
413 If your model is not listed here you can try the "nodetect"
414 module parameter.
415
416 To compile this driver as a module, choose M here: the
417 module will be called leds-clevo-mail.
418
419config LEDS_PCA955X
420 tristate "LED Support for PCA955x I2C chips"
421 depends on LEDS_CLASS
422 depends on I2C
423 help
424 This option enables support for LEDs connected to PCA955x
425 LED driver chips accessed via the I2C bus. Supported
426 devices include PCA9550, PCA9551, PCA9552, and PCA9553.
427
428config LEDS_PCA955X_GPIO
429 bool "Enable GPIO support for PCA955X"
430 depends on LEDS_PCA955X
431 depends on GPIOLIB
432 help
433 Allow unused pins on PCA955X to be used as gpio.
434
435 To use a pin as gpio the pin type should be set to
436 PCA955X_TYPE_GPIO in the device tree.
437
438
439config LEDS_PCA963X
440 tristate "LED support for PCA963x I2C chip"
441 depends on LEDS_CLASS
442 depends on I2C
443 help
444 This option enables support for LEDs connected to the PCA963x
445 LED driver chip accessed via the I2C bus. Supported
446 devices include PCA9633 and PCA9634
447
448config LEDS_WM831X_STATUS
449 tristate "LED support for status LEDs on WM831x PMICs"
450 depends on LEDS_CLASS
451 depends on MFD_WM831X
452 help
453 This option enables support for the status LEDs of the WM831x
454 series of PMICs.
455
456config LEDS_WM8350
457 tristate "LED Support for WM8350 AudioPlus PMIC"
458 depends on LEDS_CLASS
459 depends on MFD_WM8350
460 help
461 This option enables support for LEDs driven by the Wolfson
462 Microelectronics WM8350 AudioPlus PMIC.
463
464config LEDS_DA903X
465 tristate "LED Support for DA9030/DA9034 PMIC"
466 depends on LEDS_CLASS
467 depends on PMIC_DA903X
468 help
469 This option enables support for on-chip LED drivers found
470 on Dialog Semiconductor DA9030/DA9034 PMICs.
471
472config LEDS_DA9052
473 tristate "Dialog DA9052/DA9053 LEDS"
474 depends on LEDS_CLASS
475 depends on PMIC_DA9052
476 help
477 This option enables support for on-chip LED drivers found
478 on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
479
480config LEDS_DAC124S085
481 tristate "LED Support for DAC124S085 SPI DAC"
482 depends on LEDS_CLASS
483 depends on SPI
484 help
485 This option enables support for DAC124S085 SPI DAC from NatSemi,
486 which can be used to control up to four LEDs.
487
488config LEDS_PWM
489 tristate "PWM driven LED Support"
490 depends on LEDS_CLASS
491 depends on PWM
492 help
493 This option enables support for pwm driven LEDs
494
495config LEDS_REGULATOR
496 tristate "REGULATOR driven LED support"
497 depends on LEDS_CLASS
498 depends on REGULATOR
499 help
500 This option enables support for regulator driven LEDs.
501
502config LEDS_BD2802
503 tristate "LED driver for BD2802 RGB LED"
504 depends on LEDS_CLASS
505 depends on I2C
506 help
507 This option enables support for BD2802GU RGB LED driver chips
508 accessed via the I2C bus.
509
510config LEDS_INTEL_SS4200
511 tristate "LED driver for Intel NAS SS4200 series"
512 depends on LEDS_CLASS
513 depends on PCI && DMI
514 depends on X86
515 help
516 This option enables support for the Intel SS4200 series of
517 Network Attached Storage servers. You may control the hard
518 drive or power LEDs on the front panel. Using this driver
519 can stop the front LED from blinking after startup.
520
521config LEDS_LT3593
522 tristate "LED driver for LT3593 controllers"
523 depends on LEDS_CLASS
524 depends on GPIOLIB || COMPILE_TEST
525 help
526 This option enables support for LEDs driven by a Linear Technology
527 LT3593 controller. This controller uses a special one-wire pulse
528 coding protocol to set the brightness.
529
530config LEDS_ADP5520
531 tristate "LED Support for ADP5520/ADP5501 PMIC"
532 depends on LEDS_CLASS
533 depends on PMIC_ADP5520
534 help
535 This option enables support for on-chip LED drivers found
536 on Analog Devices ADP5520/ADP5501 PMICs.
537
538 To compile this driver as a module, choose M here: the module will
539 be called leds-adp5520.
540
541config LEDS_MC13783
542 tristate "LED Support for MC13XXX PMIC"
543 depends on LEDS_CLASS
544 depends on MFD_MC13XXX
545 help
546 This option enables support for on-chip LED drivers found
547 on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
548
549config LEDS_NS2
550 tristate "LED support for Network Space v2 GPIO LEDs"
551 depends on LEDS_CLASS
552 depends on MACH_KIRKWOOD || MACH_ARMADA_370
553 default y
554 help
555 This option enables support for the dual-GPIO LEDs found on the
556 following LaCie/Seagate boards:
557
558 Network Space v2 (and parents: Max, Mini)
559 Internet Space v2
560 d2 Network v2
561 n090401 (Seagate NAS 4-Bay)
562
563config LEDS_NETXBIG
564 tristate "LED support for Big Network series LEDs"
565 depends on LEDS_CLASS
566 depends on MACH_KIRKWOOD
567 default y
568 help
569 This option enables support for LEDs found on the LaCie 2Big
570 and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
571 controlled through a GPIO extension bus.
572
573config LEDS_ASIC3
574 bool "LED support for the HTC ASIC3"
575 depends on LEDS_CLASS=y
576 depends on MFD_ASIC3
577 default y
578 help
579 This option enables support for the LEDs on the HTC ASIC3. The HTC
580 ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
581 cannot be used. This driver supports hardware blinking with an on+off
582 period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
583
584config LEDS_TCA6507
585 tristate "LED Support for TCA6507 I2C chip"
586 depends on LEDS_CLASS && I2C
587 help
588 This option enables support for LEDs connected to TC6507
589 LED driver chips accessed via the I2C bus.
590 Driver support brightness control and hardware-assisted blinking.
591
592config LEDS_TLC591XX
593 tristate "LED driver for TLC59108 and TLC59116 controllers"
594 depends on LEDS_CLASS && I2C
595 select REGMAP_I2C
596 help
597 This option enables support for Texas Instruments TLC59108
598 and TLC59116 LED controllers.
599
600config LEDS_MAX77693
601 tristate "LED support for MAX77693 Flash"
602 depends on LEDS_CLASS_FLASH
603 depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
604 depends on MFD_MAX77693
605 depends on OF
606 help
607 This option enables support for the flash part of the MAX77693
608 multifunction device. It has build in control for two leds in flash
609 and torch mode.
610
611config LEDS_MAX8997
612 tristate "LED support for MAX8997 PMIC"
613 depends on LEDS_CLASS && MFD_MAX8997
614 help
615 This option enables support for on-chip LED drivers on
616 MAXIM MAX8997 PMIC.
617
618config LEDS_LM355x
619 tristate "LED support for LM3554 and LM3556 chips"
620 depends on LEDS_CLASS && I2C
621 select REGMAP_I2C
622 help
623 This option enables support for LEDs connected to LM3554
624 and LM3556. It includes Torch, Flash and Indicator functions.
625
626config LEDS_OT200
627 tristate "LED support for the Bachmann OT200"
628 depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
629 help
630 This option enables support for the LEDs on the Bachmann OT200.
631 Say Y to enable LEDs on the Bachmann OT200.
632
633config LEDS_MENF21BMC
634 tristate "LED support for the MEN 14F021P00 BMC"
635 depends on LEDS_CLASS && MFD_MENF21BMC
636 help
637 Say Y here to include support for the MEN 14F021P00 BMC LEDs.
638
639 This driver can also be built as a module. If so the module
640 will be called leds-menf21bmc.
641
642config LEDS_KTD2692
643 tristate "LED support for KTD2692 flash LED controller"
644 depends on LEDS_CLASS_FLASH && OF
645 depends on GPIOLIB || COMPILE_TEST
646 help
647 This option enables support for KTD2692 LED flash connected
648 through ExpressWire interface.
649
650 Say Y to enable this driver.
651
652config LEDS_IS31FL319X
653 tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
654 depends on LEDS_CLASS && I2C && OF
655 select REGMAP_I2C
656 help
657 This option enables support for LEDs connected to ISSI IS31FL319x
658 fancy LED driver chips accessed via the I2C bus.
659 Driver supports individual PWM brightness control for each channel.
660
661 This driver can also be built as a module. If so the module will be
662 called leds-is31fl319x.
663
664config LEDS_IS31FL32XX
665 tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
666 depends on LEDS_CLASS && I2C && OF
667 help
668 Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
669 LED controllers. They are I2C devices with multiple constant-current
670 channels, each with independent 256-level PWM control.
671
672config LEDS_SC27XX_BLTC
673 tristate "LED support for the SC27xx breathing light controller"
674 depends on LEDS_CLASS && MFD_SC27XX_PMIC
675 depends on OF
676 help
677 Say Y here to include support for the SC27xx breathing light controller
678 LEDs.
679
680 This driver can also be built as a module. If so the module will be
681 called leds-sc27xx-bltc.
682
683comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
684
685config LEDS_BLINKM
686 tristate "LED support for the BlinkM I2C RGB LED"
687 depends on LEDS_CLASS
688 depends on I2C
689 help
690 This option enables support for the BlinkM RGB LED connected
691 through I2C. Say Y to enable support for the BlinkM LED.
692
693config LEDS_POWERNV
694 tristate "LED support for PowerNV Platform"
695 depends on LEDS_CLASS
696 depends on PPC_POWERNV
697 depends on OF
698 help
699 This option enables support for the system LEDs present on
700 PowerNV platforms. Say 'y' to enable this support in kernel.
701 To compile this driver as a module, choose 'm' here: the module
702 will be called leds-powernv.
703
704config LEDS_SYSCON
705 bool "LED support for LEDs on system controllers"
706 depends on LEDS_CLASS=y
707 depends on MFD_SYSCON
708 depends on OF
709 help
710 This option enables support for the LEDs on syscon type
711 devices. This will only work with device tree enabled
712 devices.
713
714config LEDS_PM8058
715 tristate "LED Support for the Qualcomm PM8058 PMIC"
716 depends on MFD_PM8XXX
717 depends on LEDS_CLASS
718 help
719 Choose this option if you want to use the LED drivers in
720 the Qualcomm PM8058 PMIC.
721
722config LEDS_MLXCPLD
723 tristate "LED support for the Mellanox boards"
724 depends on X86 && DMI
725 depends on LEDS_CLASS
726 help
727 This option enables support for the LEDs on the Mellanox
728 boards. Say Y to enable these.
729
730config LEDS_MLXREG
731 tristate "LED support for the Mellanox switches management control"
732 depends on LEDS_CLASS
733 help
734 This option enables support for the LEDs on the Mellanox Ethernet and
735 InfiniBand switches. The driver can be activated by the platform device
736 device add call. Say Y to enable these. To compile this driver as a
737 module, choose 'M' here: the module will be called leds-mlxreg.
738
739config LEDS_USER
740 tristate "Userspace LED support"
741 depends on LEDS_CLASS
742 help
743 This option enables support for userspace LEDs. Say 'y' to enable this
744 support in kernel. To compile this driver as a module, choose 'm' here:
745 the module will be called uleds.
746
747config LEDS_NIC78BX
748 tristate "LED support for NI PXI NIC78bx devices"
749 depends on LEDS_CLASS
750 depends on X86 && ACPI
751 help
752 This option enables support for the User1 and User2 LEDs on NI
753 PXI NIC78bx devices.
754
755 To compile this driver as a module, choose M here: the module
756 will be called leds-nic78bx.
757
758comment "LED Triggers"
759source "drivers/leds/trigger/Kconfig"
760
761endif # NEW_LEDS