at v4.17 9.4 kB view raw
1/* 2 * linux/mdio.h: definitions for MDIO (clause 45) transceivers 3 * Copyright 2006-2009 Solarflare Communications Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published 7 * by the Free Software Foundation, incorporated herein by reference. 8 */ 9#ifndef __LINUX_MDIO_H__ 10#define __LINUX_MDIO_H__ 11 12#include <uapi/linux/mdio.h> 13#include <linux/mod_devicetable.h> 14 15struct gpio_desc; 16struct mii_bus; 17 18/* Multiple levels of nesting are possible. However typically this is 19 * limited to nested DSA like layer, a MUX layer, and the normal 20 * user. Instead of trying to handle the general case, just define 21 * these cases. 22 */ 23enum mdio_mutex_lock_class { 24 MDIO_MUTEX_NORMAL, 25 MDIO_MUTEX_MUX, 26 MDIO_MUTEX_NESTED, 27}; 28 29struct mdio_device { 30 struct device dev; 31 32 const struct dev_pm_ops *pm_ops; 33 struct mii_bus *bus; 34 char modalias[MDIO_NAME_SIZE]; 35 36 int (*bus_match)(struct device *dev, struct device_driver *drv); 37 void (*device_free)(struct mdio_device *mdiodev); 38 void (*device_remove)(struct mdio_device *mdiodev); 39 40 /* Bus address of the MDIO device (0-31) */ 41 int addr; 42 int flags; 43 struct gpio_desc *reset; 44 unsigned int reset_assert_delay; 45 unsigned int reset_deassert_delay; 46}; 47#define to_mdio_device(d) container_of(d, struct mdio_device, dev) 48 49/* struct mdio_driver_common: Common to all MDIO drivers */ 50struct mdio_driver_common { 51 struct device_driver driver; 52 int flags; 53}; 54#define MDIO_DEVICE_FLAG_PHY 1 55#define to_mdio_common_driver(d) \ 56 container_of(d, struct mdio_driver_common, driver) 57 58/* struct mdio_driver: Generic MDIO driver */ 59struct mdio_driver { 60 struct mdio_driver_common mdiodrv; 61 62 /* 63 * Called during discovery. Used to set 64 * up device-specific structures, if any 65 */ 66 int (*probe)(struct mdio_device *mdiodev); 67 68 /* Clears up any memory if needed */ 69 void (*remove)(struct mdio_device *mdiodev); 70}; 71#define to_mdio_driver(d) \ 72 container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv) 73 74void mdio_device_free(struct mdio_device *mdiodev); 75struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr); 76int mdio_device_register(struct mdio_device *mdiodev); 77void mdio_device_remove(struct mdio_device *mdiodev); 78void mdio_device_reset(struct mdio_device *mdiodev, int value); 79int mdio_driver_register(struct mdio_driver *drv); 80void mdio_driver_unregister(struct mdio_driver *drv); 81int mdio_device_bus_match(struct device *dev, struct device_driver *drv); 82 83static inline bool mdio_phy_id_is_c45(int phy_id) 84{ 85 return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK); 86} 87 88static inline __u16 mdio_phy_id_prtad(int phy_id) 89{ 90 return (phy_id & MDIO_PHY_ID_PRTAD) >> 5; 91} 92 93static inline __u16 mdio_phy_id_devad(int phy_id) 94{ 95 return phy_id & MDIO_PHY_ID_DEVAD; 96} 97 98/** 99 * struct mdio_if_info - Ethernet controller MDIO interface 100 * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown) 101 * @mmds: Mask of MMDs expected to be present in the PHY. This must be 102 * non-zero unless @prtad = %MDIO_PRTAD_NONE. 103 * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then 104 * MII register access will be passed through with @devad = 105 * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to 106 * commonly used clause 22 registers will be translated into 107 * clause 45 registers. 108 * @dev: Net device structure 109 * @mdio_read: Register read function; returns value or negative error code 110 * @mdio_write: Register write function; returns 0 or negative error code 111 */ 112struct mdio_if_info { 113 int prtad; 114 u32 mmds; 115 unsigned mode_support; 116 117 struct net_device *dev; 118 int (*mdio_read)(struct net_device *dev, int prtad, int devad, 119 u16 addr); 120 int (*mdio_write)(struct net_device *dev, int prtad, int devad, 121 u16 addr, u16 val); 122}; 123 124#define MDIO_PRTAD_NONE (-1) 125#define MDIO_DEVAD_NONE (-1) 126#define MDIO_SUPPORTS_C22 1 127#define MDIO_SUPPORTS_C45 2 128#define MDIO_EMULATE_C22 4 129 130struct ethtool_cmd; 131struct ethtool_pauseparam; 132extern int mdio45_probe(struct mdio_if_info *mdio, int prtad); 133extern int mdio_set_flag(const struct mdio_if_info *mdio, 134 int prtad, int devad, u16 addr, int mask, 135 bool sense); 136extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds); 137extern int mdio45_nway_restart(const struct mdio_if_info *mdio); 138extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, 139 struct ethtool_cmd *ecmd, 140 u32 npage_adv, u32 npage_lpa); 141extern void 142mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio, 143 struct ethtool_link_ksettings *cmd, 144 u32 npage_adv, u32 npage_lpa); 145 146/** 147 * mdio45_ethtool_gset - get settings for ETHTOOL_GSET 148 * @mdio: MDIO interface 149 * @ecmd: Ethtool request structure 150 * 151 * Since the CSRs for auto-negotiation using next pages are not fully 152 * standardised, this function does not attempt to decode them. Use 153 * mdio45_ethtool_gset_npage() to specify advertisement bits from next 154 * pages. 155 */ 156static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio, 157 struct ethtool_cmd *ecmd) 158{ 159 mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0); 160} 161 162/** 163 * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS 164 * @mdio: MDIO interface 165 * @cmd: Ethtool request structure 166 * 167 * Since the CSRs for auto-negotiation using next pages are not fully 168 * standardised, this function does not attempt to decode them. Use 169 * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits 170 * from next pages. 171 */ 172static inline void 173mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio, 174 struct ethtool_link_ksettings *cmd) 175{ 176 mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0); 177} 178 179extern int mdio_mii_ioctl(const struct mdio_if_info *mdio, 180 struct mii_ioctl_data *mii_data, int cmd); 181 182/** 183 * mmd_eee_cap_to_ethtool_sup_t 184 * @eee_cap: value of the MMD EEE Capability register 185 * 186 * A small helper function that translates MMD EEE Capability (3.20) bits 187 * to ethtool supported settings. 188 */ 189static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap) 190{ 191 u32 supported = 0; 192 193 if (eee_cap & MDIO_EEE_100TX) 194 supported |= SUPPORTED_100baseT_Full; 195 if (eee_cap & MDIO_EEE_1000T) 196 supported |= SUPPORTED_1000baseT_Full; 197 if (eee_cap & MDIO_EEE_10GT) 198 supported |= SUPPORTED_10000baseT_Full; 199 if (eee_cap & MDIO_EEE_1000KX) 200 supported |= SUPPORTED_1000baseKX_Full; 201 if (eee_cap & MDIO_EEE_10GKX4) 202 supported |= SUPPORTED_10000baseKX4_Full; 203 if (eee_cap & MDIO_EEE_10GKR) 204 supported |= SUPPORTED_10000baseKR_Full; 205 206 return supported; 207} 208 209/** 210 * mmd_eee_adv_to_ethtool_adv_t 211 * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers 212 * 213 * A small helper function that translates the MMD EEE Advertisment (7.60) 214 * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement 215 * settings. 216 */ 217static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv) 218{ 219 u32 adv = 0; 220 221 if (eee_adv & MDIO_EEE_100TX) 222 adv |= ADVERTISED_100baseT_Full; 223 if (eee_adv & MDIO_EEE_1000T) 224 adv |= ADVERTISED_1000baseT_Full; 225 if (eee_adv & MDIO_EEE_10GT) 226 adv |= ADVERTISED_10000baseT_Full; 227 if (eee_adv & MDIO_EEE_1000KX) 228 adv |= ADVERTISED_1000baseKX_Full; 229 if (eee_adv & MDIO_EEE_10GKX4) 230 adv |= ADVERTISED_10000baseKX4_Full; 231 if (eee_adv & MDIO_EEE_10GKR) 232 adv |= ADVERTISED_10000baseKR_Full; 233 234 return adv; 235} 236 237/** 238 * ethtool_adv_to_mmd_eee_adv_t 239 * @adv: the ethtool advertisement settings 240 * 241 * A small helper function that translates ethtool advertisement settings 242 * to EEE advertisements for the MMD EEE Advertisement (7.60) and 243 * MMD EEE Link Partner Ability (7.61) registers. 244 */ 245static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv) 246{ 247 u16 reg = 0; 248 249 if (adv & ADVERTISED_100baseT_Full) 250 reg |= MDIO_EEE_100TX; 251 if (adv & ADVERTISED_1000baseT_Full) 252 reg |= MDIO_EEE_1000T; 253 if (adv & ADVERTISED_10000baseT_Full) 254 reg |= MDIO_EEE_10GT; 255 if (adv & ADVERTISED_1000baseKX_Full) 256 reg |= MDIO_EEE_1000KX; 257 if (adv & ADVERTISED_10000baseKX4_Full) 258 reg |= MDIO_EEE_10GKX4; 259 if (adv & ADVERTISED_10000baseKR_Full) 260 reg |= MDIO_EEE_10GKR; 261 262 return reg; 263} 264 265int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); 266int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); 267 268int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); 269int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum); 270int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); 271int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val); 272 273int mdiobus_register_device(struct mdio_device *mdiodev); 274int mdiobus_unregister_device(struct mdio_device *mdiodev); 275bool mdiobus_is_registered_device(struct mii_bus *bus, int addr); 276struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr); 277 278/** 279 * mdio_module_driver() - Helper macro for registering mdio drivers 280 * 281 * Helper macro for MDIO drivers which do not do anything special in module 282 * init/exit. Each module may only use this macro once, and calling it 283 * replaces module_init() and module_exit(). 284 */ 285#define mdio_module_driver(_mdio_driver) \ 286static int __init mdio_module_init(void) \ 287{ \ 288 return mdio_driver_register(&_mdio_driver); \ 289} \ 290module_init(mdio_module_init); \ 291static void __exit mdio_module_exit(void) \ 292{ \ 293 mdio_driver_unregister(&_mdio_driver); \ 294} \ 295module_exit(mdio_module_exit) 296 297#endif /* __LINUX_MDIO_H__ */