Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1#
2# Light sensors
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Light sensors"
7
8config ACPI_ALS
9 tristate "ACPI Ambient Light Sensor"
10 depends on ACPI
11 select IIO_BUFFER
12 select IIO_TRIGGERED_BUFFER
13 select IIO_KFIFO_BUF
14 help
15 Say Y here if you want to build a driver for the ACPI0008
16 Ambient Light Sensor.
17
18 To compile this driver as a module, choose M here: the module will
19 be called acpi-als.
20
21config ADJD_S311
22 tristate "ADJD-S311-CR999 digital color sensor"
23 select IIO_BUFFER
24 select IIO_TRIGGERED_BUFFER
25 depends on I2C
26 help
27 If you say yes here you get support for the Avago ADJD-S311-CR999
28 digital color light sensor.
29
30 This driver can also be built as a module. If so, the module
31 will be called adjd_s311.
32
33config AL3320A
34 tristate "AL3320A ambient light sensor"
35 depends on I2C
36 help
37 Say Y here if you want to build a driver for the Dyna Image AL3320A
38 ambient light sensor.
39
40 To compile this driver as a module, choose M here: the
41 module will be called al3320a.
42
43config APDS9300
44 tristate "APDS9300 ambient light sensor"
45 depends on I2C
46 help
47 Say Y here if you want to build a driver for the Avago APDS9300
48 ambient light sensor.
49
50 To compile this driver as a module, choose M here: the
51 module will be called apds9300.
52
53config APDS9960
54 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
55 select REGMAP_I2C
56 select IIO_BUFFER
57 select IIO_KFIFO_BUF
58 depends on I2C
59 help
60 Say Y here to build I2C interface support for the Avago
61 APDS9960 gesture/RGB/ALS/proximity sensor.
62
63 To compile this driver as a module, choose M here: the
64 module will be called apds9960
65
66config BH1750
67 tristate "ROHM BH1750 ambient light sensor"
68 depends on I2C
69 help
70 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
71 BH1750, BH1751 ambient light sensors.
72
73 To compile this driver as a module, choose M here: the module will
74 be called bh1750.
75
76config BH1780
77 tristate "ROHM BH1780 ambient light sensor"
78 depends on I2C
79 help
80 Say Y here to build support for the ROHM BH1780GLI ambient
81 light sensor.
82
83 To compile this driver as a module, choose M here: the module will
84 be called bh1780.
85
86config CM32181
87 depends on I2C
88 tristate "CM32181 driver"
89 help
90 Say Y here if you use cm32181.
91 This option enables ambient light sensor using
92 Capella cm32181 device driver.
93
94 To compile this driver as a module, choose M here:
95 the module will be called cm32181.
96
97config CM3232
98 depends on I2C
99 tristate "CM3232 ambient light sensor"
100 help
101 Say Y here if you use cm3232.
102 This option enables ambient light sensor using
103 Capella Microsystems cm3232 device driver.
104
105 To compile this driver as a module, choose M here:
106 the module will be called cm3232.
107
108config CM3323
109 depends on I2C
110 tristate "Capella CM3323 color light sensor"
111 help
112 Say Y here if you want to build a driver for Capella CM3323
113 color sensor.
114
115 To compile this driver as a module, choose M here: the module will
116 be called cm3323.
117
118config CM3605
119 tristate "Capella CM3605 ambient light and proximity sensor"
120 depends on OF
121 help
122 Say Y here if you want to build a driver for Capella CM3605
123 ambient light and short range proximity sensor.
124
125 To compile this driver as a module, choose M here: the module will
126 be called cm3605.
127
128config CM36651
129 depends on I2C
130 tristate "CM36651 driver"
131 help
132 Say Y here if you use cm36651.
133 This option enables proximity & RGB sensor using
134 Capella cm36651 device driver.
135
136 To compile this driver as a module, choose M here:
137 the module will be called cm36651.
138
139config IIO_CROS_EC_LIGHT_PROX
140 tristate "ChromeOS EC Light and Proximity Sensors"
141 depends on IIO_CROS_EC_SENSORS_CORE
142 help
143 Say Y here if you use the light and proximity sensors
144 presented by the ChromeOS EC Sensor hub.
145
146 To compile this driver as a module, choose M here:
147 the module will be called cros_ec_light_prox.
148
149config GP2AP020A00F
150 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
151 depends on I2C
152 select REGMAP_I2C
153 select IIO_BUFFER
154 select IIO_TRIGGERED_BUFFER
155 select IRQ_WORK
156 help
157 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
158 hooked to an I2C bus.
159
160 To compile this driver as a module, choose M here: the
161 module will be called gp2ap020a00f.
162
163config SENSORS_ISL29018
164 tristate "Intersil 29018 light and proximity sensor"
165 depends on I2C
166 select REGMAP_I2C
167 default n
168 help
169 If you say yes here you get support for ambient light sensing and
170 proximity infrared sensing from Intersil ISL29018.
171 This driver will provide the measurements of ambient light intensity
172 in lux, proximity infrared sensing and normal infrared sensing.
173 Data from sensor is accessible via sysfs.
174
175config SENSORS_ISL29028
176 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
177 depends on I2C
178 select REGMAP_I2C
179 help
180 Provides driver for the Intersil's ISL29028 device.
181 This driver supports the sysfs interface to get the ALS, IR intensity,
182 Proximity value via iio. The ISL29028 provides the concurrent sensing
183 of ambient light and proximity.
184
185config ISL29125
186 tristate "Intersil ISL29125 digital color light sensor"
187 depends on I2C
188 select IIO_BUFFER
189 select IIO_TRIGGERED_BUFFER
190 help
191 Say Y here if you want to build a driver for the Intersil ISL29125
192 RGB light sensor for I2C.
193
194 To compile this driver as a module, choose M here: the module will be
195 called isl29125.
196
197config HID_SENSOR_ALS
198 depends on HID_SENSOR_HUB
199 select IIO_BUFFER
200 select IIO_TRIGGERED_BUFFER
201 select HID_SENSOR_IIO_COMMON
202 select HID_SENSOR_IIO_TRIGGER
203 tristate "HID ALS"
204 help
205 Say yes here to build support for the HID SENSOR
206 Ambient light sensor.
207
208 To compile this driver as a module, choose M here: the
209 module will be called hid-sensor-als.
210
211config HID_SENSOR_PROX
212 depends on HID_SENSOR_HUB
213 select IIO_BUFFER
214 select IIO_TRIGGERED_BUFFER
215 select HID_SENSOR_IIO_COMMON
216 select HID_SENSOR_IIO_TRIGGER
217 tristate "HID PROX"
218 help
219 Say yes here to build support for the HID SENSOR
220 Proximity sensor.
221
222 To compile this driver as a module, choose M here: the
223 module will be called hid-sensor-prox.
224
225config JSA1212
226 tristate "JSA1212 ALS and proximity sensor driver"
227 depends on I2C
228 select REGMAP_I2C
229 help
230 Say Y here if you want to build a IIO driver for JSA1212
231 proximity & ALS sensor device.
232
233 To compile this driver as a module, choose M here:
234 the module will be called jsa1212.
235
236config RPR0521
237 tristate "ROHM RPR0521 ALS and proximity sensor driver"
238 depends on I2C
239 select REGMAP_I2C
240 help
241 Say Y here if you want to build support for ROHM's RPR0521
242 ambient light and proximity sensor device.
243
244 To compile this driver as a module, choose M here:
245 the module will be called rpr0521.
246
247config SENSORS_LM3533
248 tristate "LM3533 ambient light sensor"
249 depends on MFD_LM3533
250 help
251 If you say yes here you get support for the ambient light sensor
252 interface on National Semiconductor / TI LM3533 Lighting Power
253 chips.
254
255 The sensor interface can be used to control the LEDs and backlights
256 of the chip through defining five light zones and three sets of
257 corresponding output-current values.
258
259 The driver provides raw and mean adc readings along with the current
260 light zone through sysfs. A threshold event can be generated on zone
261 changes. The ALS-control output values can be set per zone for the
262 three current output channels.
263
264config LTR501
265 tristate "LTR-501ALS-01 light sensor"
266 depends on I2C
267 select REGMAP_I2C
268 select IIO_BUFFER
269 select IIO_TRIGGERED_BUFFER
270 help
271 If you say yes here you get support for the Lite-On LTR-501ALS-01
272 ambient light and proximity sensor. This driver also supports LTR-559
273 ALS/PS or LTR-301 ALS sensors.
274
275 This driver can also be built as a module. If so, the module
276 will be called ltr501.
277
278config LV0104CS
279 tristate "LV0104CS Ambient Light Sensor"
280 depends on I2C
281 help
282 Say Y here if you want to build support for the On Semiconductor
283 LV0104CS ambient light sensor.
284
285 To compile this driver as a module, choose M here:
286 the module will be called lv0104cs.
287
288config MAX44000
289 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
290 depends on I2C
291 select REGMAP_I2C
292 select IIO_BUFFER
293 select IIO_TRIGGERED_BUFFER
294 help
295 Say Y here if you want to build support for Maxim Integrated's
296 MAX44000 ambient and infrared proximity sensor device.
297
298 To compile this driver as a module, choose M here:
299 the module will be called max44000.
300
301config OPT3001
302 tristate "Texas Instruments OPT3001 Light Sensor"
303 depends on I2C
304 help
305 If you say Y or M here, you get support for Texas Instruments
306 OPT3001 Ambient Light Sensor.
307
308 If built as a dynamically linked module, it will be called
309 opt3001.
310
311config PA12203001
312 tristate "TXC PA12203001 light and proximity sensor"
313 depends on I2C
314 select REGMAP_I2C
315 help
316 If you say yes here you get support for the TXC PA12203001
317 ambient light and proximity sensor.
318
319 This driver can also be built as a module. If so, the module
320 will be called pa12203001.
321
322config SI1145
323 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
324 depends on I2C
325 select IIO_BUFFER
326 select IIO_TRIGGERED_BUFFER
327 help
328 Say Y here if you want to build a driver for the Silicon Labs SI1132 or
329 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
330 chips.
331
332 To compile this driver as a module, choose M here: the module will be
333 called si1145.
334
335config STK3310
336 tristate "STK3310 ALS and proximity sensor"
337 depends on I2C
338 select REGMAP_I2C
339 help
340 Say yes here to get support for the Sensortek STK3310 ambient light
341 and proximity sensor. The STK3311 model is also supported by this
342 driver.
343
344 Choosing M will build the driver as a module. If so, the module
345 will be called stk3310.
346
347config ST_UVIS25
348 tristate "STMicroelectronics UVIS25 sensor driver"
349 depends on (I2C || SPI)
350 select IIO_BUFFER
351 select IIO_TRIGGERED_BUFFER
352 select ST_UVIS25_I2C if (I2C)
353 select ST_UVIS25_SPI if (SPI_MASTER)
354 help
355 Say yes here to build support for STMicroelectronics UVIS25
356 uv sensor
357
358 To compile this driver as a module, choose M here: the module
359 will be called st_uvis25.
360
361config ST_UVIS25_I2C
362 tristate
363 depends on ST_UVIS25
364 select REGMAP_I2C
365
366config ST_UVIS25_SPI
367 tristate
368 depends on ST_UVIS25
369 select REGMAP_SPI
370
371config TCS3414
372 tristate "TAOS TCS3414 digital color sensor"
373 depends on I2C
374 select IIO_BUFFER
375 select IIO_TRIGGERED_BUFFER
376 help
377 If you say yes here you get support for the TAOS TCS3414
378 family of digital color sensors.
379
380 This driver can also be built as a module. If so, the module
381 will be called tcs3414.
382
383config TCS3472
384 tristate "TAOS TCS3472 color light-to-digital converter"
385 depends on I2C
386 select IIO_BUFFER
387 select IIO_TRIGGERED_BUFFER
388 help
389 If you say yes here you get support for the TAOS TCS3472
390 family of color light-to-digital converters with IR filter.
391
392 This driver can also be built as a module. If so, the module
393 will be called tcs3472.
394
395config SENSORS_TSL2563
396 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
397 depends on I2C
398 help
399 If you say yes here you get support for the Taos TSL2560,
400 TSL2561, TSL2562 and TSL2563 ambient light sensors.
401
402 This driver can also be built as a module. If so, the module
403 will be called tsl2563.
404
405config TSL2583
406 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
407 depends on I2C
408 help
409 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
410 Access ALS data via iio, sysfs.
411
412config TSL4531
413 tristate "TAOS TSL4531 ambient light sensors"
414 depends on I2C
415 help
416 Say Y here if you want to build a driver for the TAOS TSL4531 family
417 of ambient light sensors with direct lux output.
418
419 To compile this driver as a module, choose M here: the
420 module will be called tsl4531.
421
422config US5182D
423 tristate "UPISEMI light and proximity sensor"
424 depends on I2C
425 help
426 If you say yes here you get support for the UPISEMI US5182D
427 ambient light and proximity sensor.
428
429 This driver can also be built as a module. If so, the module
430 will be called us5182d.
431
432config VCNL4000
433 tristate "VCNL4000/4010/4020 combined ALS and proximity sensor"
434 depends on I2C
435 help
436 Say Y here if you want to build a driver for the Vishay VCNL4000,
437 VCNL4010, VCNL4020 combined ambient light and proximity sensor.
438
439 To compile this driver as a module, choose M here: the
440 module will be called vcnl4000.
441
442config VEML6070
443 tristate "VEML6070 UV A light sensor"
444 depends on I2C
445 help
446 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
447 light sensor.
448
449 To compile this driver as a module, choose M here: the
450 module will be called veml6070.
451
452config VL6180
453 tristate "VL6180 ALS, range and proximity sensor"
454 depends on I2C
455 help
456 Say Y here if you want to build a driver for the STMicroelectronics
457 VL6180 combined ambient light, range and proximity sensor.
458
459 To compile this driver as a module, choose M here: the
460 module will be called vl6180.
461
462config ZOPT2201
463 tristate "ZOPT2201 ALS and UV B sensor"
464 depends on I2C
465 help
466 Say Y here if you want to build a driver for the IDT
467 ZOPT2201 ambient light and UV B sensor.
468
469 To compile this driver as a module, choose M here: the
470 module will be called zopt2201.
471
472endmenu