Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v4.16 418 lines 11 kB view raw
1/* 2 * DRM driver for Sitronix ST7586 panels 3 * 4 * Copyright 2017 David Lechner <david@lechnology.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 */ 11 12#include <linux/delay.h> 13#include <linux/dma-buf.h> 14#include <linux/gpio/consumer.h> 15#include <linux/module.h> 16#include <linux/property.h> 17#include <linux/spi/spi.h> 18#include <video/mipi_display.h> 19 20#include <drm/drm_fb_helper.h> 21#include <drm/drm_gem_framebuffer_helper.h> 22#include <drm/tinydrm/mipi-dbi.h> 23#include <drm/tinydrm/tinydrm-helpers.h> 24 25/* controller-specific commands */ 26#define ST7586_DISP_MODE_GRAY 0x38 27#define ST7586_DISP_MODE_MONO 0x39 28#define ST7586_ENABLE_DDRAM 0x3a 29#define ST7586_SET_DISP_DUTY 0xb0 30#define ST7586_SET_PART_DISP 0xb4 31#define ST7586_SET_NLINE_INV 0xb5 32#define ST7586_SET_VOP 0xc0 33#define ST7586_SET_BIAS_SYSTEM 0xc3 34#define ST7586_SET_BOOST_LEVEL 0xc4 35#define ST7586_SET_VOP_OFFSET 0xc7 36#define ST7586_ENABLE_ANALOG 0xd0 37#define ST7586_AUTO_READ_CTRL 0xd7 38#define ST7586_OTP_RW_CTRL 0xe0 39#define ST7586_OTP_CTRL_OUT 0xe1 40#define ST7586_OTP_READ 0xe3 41 42#define ST7586_DISP_CTRL_MX BIT(6) 43#define ST7586_DISP_CTRL_MY BIT(7) 44 45/* 46 * The ST7586 controller has an unusual pixel format where 2bpp grayscale is 47 * packed 3 pixels per byte with the first two pixels using 3 bits and the 3rd 48 * pixel using only 2 bits. 49 * 50 * | D7 | D6 | D5 || | || 2bpp | 51 * | (D4) | (D3) | (D2) || D1 | D0 || GRAY | 52 * +------+------+------++------+------++------+ 53 * | 1 | 1 | 1 || 1 | 1 || 0 0 | black 54 * | 1 | 0 | 0 || 1 | 0 || 0 1 | dark gray 55 * | 0 | 1 | 0 || 0 | 1 || 1 0 | light gray 56 * | 0 | 0 | 0 || 0 | 0 || 1 1 | white 57 */ 58 59static const u8 st7586_lookup[] = { 0x7, 0x4, 0x2, 0x0 }; 60 61static void st7586_xrgb8888_to_gray332(u8 *dst, void *vaddr, 62 struct drm_framebuffer *fb, 63 struct drm_clip_rect *clip) 64{ 65 size_t len = (clip->x2 - clip->x1) * (clip->y2 - clip->y1); 66 unsigned int x, y; 67 u8 *src, *buf, val; 68 69 buf = kmalloc(len, GFP_KERNEL); 70 if (!buf) 71 return; 72 73 tinydrm_xrgb8888_to_gray8(buf, vaddr, fb, clip); 74 src = buf; 75 76 for (y = clip->y1; y < clip->y2; y++) { 77 for (x = clip->x1; x < clip->x2; x += 3) { 78 val = st7586_lookup[*src++ >> 6] << 5; 79 val |= st7586_lookup[*src++ >> 6] << 2; 80 val |= st7586_lookup[*src++ >> 6] >> 1; 81 *dst++ = val; 82 } 83 } 84 85 kfree(buf); 86} 87 88static int st7586_buf_copy(void *dst, struct drm_framebuffer *fb, 89 struct drm_clip_rect *clip) 90{ 91 struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0); 92 struct dma_buf_attachment *import_attach = cma_obj->base.import_attach; 93 void *src = cma_obj->vaddr; 94 int ret = 0; 95 96 if (import_attach) { 97 ret = dma_buf_begin_cpu_access(import_attach->dmabuf, 98 DMA_FROM_DEVICE); 99 if (ret) 100 return ret; 101 } 102 103 st7586_xrgb8888_to_gray332(dst, src, fb, clip); 104 105 if (import_attach) 106 ret = dma_buf_end_cpu_access(import_attach->dmabuf, 107 DMA_FROM_DEVICE); 108 109 return ret; 110} 111 112static int st7586_fb_dirty(struct drm_framebuffer *fb, 113 struct drm_file *file_priv, unsigned int flags, 114 unsigned int color, struct drm_clip_rect *clips, 115 unsigned int num_clips) 116{ 117 struct tinydrm_device *tdev = fb->dev->dev_private; 118 struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); 119 struct drm_clip_rect clip; 120 int start, end; 121 int ret = 0; 122 123 mutex_lock(&tdev->dirty_lock); 124 125 if (!mipi->enabled) 126 goto out_unlock; 127 128 /* fbdev can flush even when we're not interested */ 129 if (tdev->pipe.plane.fb != fb) 130 goto out_unlock; 131 132 tinydrm_merge_clips(&clip, clips, num_clips, flags, fb->width, 133 fb->height); 134 135 /* 3 pixels per byte, so grow clip to nearest multiple of 3 */ 136 clip.x1 = rounddown(clip.x1, 3); 137 clip.x2 = roundup(clip.x2, 3); 138 139 DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id, 140 clip.x1, clip.x2, clip.y1, clip.y2); 141 142 ret = st7586_buf_copy(mipi->tx_buf, fb, &clip); 143 if (ret) 144 goto out_unlock; 145 146 /* Pixels are packed 3 per byte */ 147 start = clip.x1 / 3; 148 end = clip.x2 / 3; 149 150 mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS, 151 (start >> 8) & 0xFF, start & 0xFF, 152 (end >> 8) & 0xFF, (end - 1) & 0xFF); 153 mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS, 154 (clip.y1 >> 8) & 0xFF, clip.y1 & 0xFF, 155 (clip.y2 >> 8) & 0xFF, (clip.y2 - 1) & 0xFF); 156 157 ret = mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START, 158 (u8 *)mipi->tx_buf, 159 (end - start) * (clip.y2 - clip.y1)); 160 161out_unlock: 162 mutex_unlock(&tdev->dirty_lock); 163 164 if (ret) 165 dev_err_once(fb->dev->dev, "Failed to update display %d\n", 166 ret); 167 168 return ret; 169} 170 171static const struct drm_framebuffer_funcs st7586_fb_funcs = { 172 .destroy = drm_gem_fb_destroy, 173 .create_handle = drm_gem_fb_create_handle, 174 .dirty = st7586_fb_dirty, 175}; 176 177static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe, 178 struct drm_crtc_state *crtc_state) 179{ 180 struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); 181 struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); 182 struct drm_framebuffer *fb = pipe->plane.fb; 183 struct device *dev = tdev->drm->dev; 184 int ret; 185 u8 addr_mode; 186 187 DRM_DEBUG_KMS("\n"); 188 189 mipi_dbi_hw_reset(mipi); 190 ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f); 191 if (ret) { 192 DRM_DEV_ERROR(dev, "Error sending command %d\n", ret); 193 return; 194 } 195 196 mipi_dbi_command(mipi, ST7586_OTP_RW_CTRL, 0x00); 197 198 msleep(10); 199 200 mipi_dbi_command(mipi, ST7586_OTP_READ); 201 202 msleep(20); 203 204 mipi_dbi_command(mipi, ST7586_OTP_CTRL_OUT); 205 mipi_dbi_command(mipi, MIPI_DCS_EXIT_SLEEP_MODE); 206 mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF); 207 208 msleep(50); 209 210 mipi_dbi_command(mipi, ST7586_SET_VOP_OFFSET, 0x00); 211 mipi_dbi_command(mipi, ST7586_SET_VOP, 0xe3, 0x00); 212 mipi_dbi_command(mipi, ST7586_SET_BIAS_SYSTEM, 0x02); 213 mipi_dbi_command(mipi, ST7586_SET_BOOST_LEVEL, 0x04); 214 mipi_dbi_command(mipi, ST7586_ENABLE_ANALOG, 0x1d); 215 mipi_dbi_command(mipi, ST7586_SET_NLINE_INV, 0x00); 216 mipi_dbi_command(mipi, ST7586_DISP_MODE_GRAY); 217 mipi_dbi_command(mipi, ST7586_ENABLE_DDRAM, 0x02); 218 219 switch (mipi->rotation) { 220 default: 221 addr_mode = 0x00; 222 break; 223 case 90: 224 addr_mode = ST7586_DISP_CTRL_MY; 225 break; 226 case 180: 227 addr_mode = ST7586_DISP_CTRL_MX | ST7586_DISP_CTRL_MY; 228 break; 229 case 270: 230 addr_mode = ST7586_DISP_CTRL_MX; 231 break; 232 } 233 mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); 234 235 mipi_dbi_command(mipi, ST7586_SET_DISP_DUTY, 0x7f); 236 mipi_dbi_command(mipi, ST7586_SET_PART_DISP, 0xa0); 237 mipi_dbi_command(mipi, MIPI_DCS_SET_PARTIAL_AREA, 0x00, 0x00, 0x00, 0x77); 238 mipi_dbi_command(mipi, MIPI_DCS_EXIT_INVERT_MODE); 239 240 msleep(100); 241 242 mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON); 243 244 mipi->enabled = true; 245 246 if (fb) 247 fb->funcs->dirty(fb, NULL, 0, 0, NULL, 0); 248} 249 250static void st7586_pipe_disable(struct drm_simple_display_pipe *pipe) 251{ 252 struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); 253 struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); 254 255 DRM_DEBUG_KMS("\n"); 256 257 if (!mipi->enabled) 258 return; 259 260 mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF); 261 mipi->enabled = false; 262} 263 264static const u32 st7586_formats[] = { 265 DRM_FORMAT_XRGB8888, 266}; 267 268static int st7586_init(struct device *dev, struct mipi_dbi *mipi, 269 const struct drm_simple_display_pipe_funcs *pipe_funcs, 270 struct drm_driver *driver, const struct drm_display_mode *mode, 271 unsigned int rotation) 272{ 273 size_t bufsize = (mode->vdisplay + 2) / 3 * mode->hdisplay; 274 struct tinydrm_device *tdev = &mipi->tinydrm; 275 int ret; 276 277 mutex_init(&mipi->cmdlock); 278 279 mipi->tx_buf = devm_kmalloc(dev, bufsize, GFP_KERNEL); 280 if (!mipi->tx_buf) 281 return -ENOMEM; 282 283 ret = devm_tinydrm_init(dev, tdev, &st7586_fb_funcs, driver); 284 if (ret) 285 return ret; 286 287 ret = tinydrm_display_pipe_init(tdev, pipe_funcs, 288 DRM_MODE_CONNECTOR_VIRTUAL, 289 st7586_formats, 290 ARRAY_SIZE(st7586_formats), 291 mode, rotation); 292 if (ret) 293 return ret; 294 295 tdev->drm->mode_config.preferred_depth = 32; 296 mipi->rotation = rotation; 297 298 drm_mode_config_reset(tdev->drm); 299 300 DRM_DEBUG_KMS("preferred_depth=%u, rotation = %u\n", 301 tdev->drm->mode_config.preferred_depth, rotation); 302 303 return 0; 304} 305 306static const struct drm_simple_display_pipe_funcs st7586_pipe_funcs = { 307 .enable = st7586_pipe_enable, 308 .disable = st7586_pipe_disable, 309 .update = tinydrm_display_pipe_update, 310 .prepare_fb = tinydrm_display_pipe_prepare_fb, 311}; 312 313static const struct drm_display_mode st7586_mode = { 314 TINYDRM_MODE(178, 128, 37, 27), 315}; 316 317DEFINE_DRM_GEM_CMA_FOPS(st7586_fops); 318 319static struct drm_driver st7586_driver = { 320 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | 321 DRIVER_ATOMIC, 322 .fops = &st7586_fops, 323 TINYDRM_GEM_DRIVER_OPS, 324 .lastclose = drm_fb_helper_lastclose, 325 .debugfs_init = mipi_dbi_debugfs_init, 326 .name = "st7586", 327 .desc = "Sitronix ST7586", 328 .date = "20170801", 329 .major = 1, 330 .minor = 0, 331}; 332 333static const struct of_device_id st7586_of_match[] = { 334 { .compatible = "lego,ev3-lcd" }, 335 {}, 336}; 337MODULE_DEVICE_TABLE(of, st7586_of_match); 338 339static const struct spi_device_id st7586_id[] = { 340 { "ev3-lcd", 0 }, 341 { }, 342}; 343MODULE_DEVICE_TABLE(spi, st7586_id); 344 345static int st7586_probe(struct spi_device *spi) 346{ 347 struct device *dev = &spi->dev; 348 struct mipi_dbi *mipi; 349 struct gpio_desc *a0; 350 u32 rotation = 0; 351 int ret; 352 353 mipi = devm_kzalloc(dev, sizeof(*mipi), GFP_KERNEL); 354 if (!mipi) 355 return -ENOMEM; 356 357 mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); 358 if (IS_ERR(mipi->reset)) { 359 DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); 360 return PTR_ERR(mipi->reset); 361 } 362 363 a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW); 364 if (IS_ERR(a0)) { 365 DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n"); 366 return PTR_ERR(a0); 367 } 368 369 device_property_read_u32(dev, "rotation", &rotation); 370 371 ret = mipi_dbi_spi_init(spi, mipi, a0); 372 if (ret) 373 return ret; 374 375 /* Cannot read from this controller via SPI */ 376 mipi->read_commands = NULL; 377 378 /* 379 * we are using 8-bit data, so we are not actually swapping anything, 380 * but setting mipi->swap_bytes makes mipi_dbi_typec3_command() do the 381 * right thing and not use 16-bit transfers (which results in swapped 382 * bytes on little-endian systems and causes out of order data to be 383 * sent to the display). 384 */ 385 mipi->swap_bytes = true; 386 387 ret = st7586_init(&spi->dev, mipi, &st7586_pipe_funcs, &st7586_driver, 388 &st7586_mode, rotation); 389 if (ret) 390 return ret; 391 392 spi_set_drvdata(spi, mipi); 393 394 return devm_tinydrm_register(&mipi->tinydrm); 395} 396 397static void st7586_shutdown(struct spi_device *spi) 398{ 399 struct mipi_dbi *mipi = spi_get_drvdata(spi); 400 401 tinydrm_shutdown(&mipi->tinydrm); 402} 403 404static struct spi_driver st7586_spi_driver = { 405 .driver = { 406 .name = "st7586", 407 .owner = THIS_MODULE, 408 .of_match_table = st7586_of_match, 409 }, 410 .id_table = st7586_id, 411 .probe = st7586_probe, 412 .shutdown = st7586_shutdown, 413}; 414module_spi_driver(st7586_spi_driver); 415 416MODULE_DESCRIPTION("Sitronix ST7586 DRM driver"); 417MODULE_AUTHOR("David Lechner <david@lechnology.com>"); 418MODULE_LICENSE("GPL");